Database Info

O2 mini WWE 1.11 ROM Uploaded

I have just uploaded the Xda mini 1.11 Rom (released at the O2 Hong Kong website):
Shipped ROM:
ftp://xda:[email protected]/Magician/Shipped_ROMS/o2asia_11100_922_11100_ship.exe
Extended ROM:
ftp://xda:[email protected]/Magician/Extended_Roms/O2Asia_CHT_1.11.902/
ftp://xda:[email protected]/Magician/Extended_Roms/O2Asia_CHT_1.11.902.zip
Xda II mini system software upgrade (English ver) May 2005
Introduction
Since the launch of Xda II mini, a few enhancements have been made to the device. This System Software Upgrade consolidates all enhancements into a single ROM upgrade. O2 encourages Xda II mini users to upgrade their devices to this system software.
English ROM
ROM: 1.11.00 WW
Radio: 1.11.00
ExtROM: 1.11.922 WWE
MMS: 2.0.0.22
What's new?
Latest updates on Microsoft Windows Mobile - latest Microsoft AKU release 2.6 for Windows Mobiles 2003 Second Edition.
MMS client - MMS client upgraded to 2.0.0.22 with improvements in interoperability.
Radio software - Tested in major operators network in Asia. Improvements on GRPS and GSM performance.
New and updated operator network settings - New additional operator settings for CTM (Macau), Orange (Thailand), Peoples (Hong Kong) and Sun Cellular (Philippines).
Resolutions to known issues
Fine-tuned speaker phone echo cancellation.
Improved audio quality.
Occasional radio no signal when PDA wake-up base band.
Occasional AEC failure during voice call.
Occasional failure in receiving cell broadcast message after reset.
Other party unable to hear voice using Bluetooth headset 5 minutes after device goes into power safe mode.
Updated keyboard mapping
"Load text failed!" displays in localization builds in MMS.
Time stamp incorrect in message info in MMS.
Remark: AKU = Adaptation Kit Update
Requiremens before upgrade
Microsoft Windows 2000 or XP with ActiveSync 3.7.1 or later. Other operating systems are NOT supported and may result in damages to your devices.
Special notes
1. All data and applications will be lost. Please backup data before the installation. Reinstallation of third-party applications will be required.
2. Once being installed, previous ROM cannot be restored. Should problems happen during or after the installation, the device may require servicing in O2 service centres.
PRECAUTION 1. Make sure battery power of your Xda II mini is fully charged.
2. Reset your Xda II mini and close all running applications prior to upgrade.
3. Restart your PC and close all applications prior to upgrade.
4. Connect directly to the USB port of your PC. Using a USB hub may affect ROM upgrade process.
5. Do not interrupt the ROM upgrade process.
6. Do not use other applications on your PC during the ROM upgrade.

Hi ... am waiting for your Ext ROM. how do you install it? many thanks

Shipped ROM:
ftp://xda:[email protected]/Magician/Shipped_ROMS/o2asia_11100_922_11100_ship.exe
Extended ROM:
ftp://xda:[email protected]/Magician/Extended_Roms/O2Asia_CHT_1.11.902/
ftp://xda:[email protected]/Magician/Extended_Roms/O2Asia_CHT_1.11.902.zip

is there a german rom tho?

what is in the extened rom and what is the advantage of loading it?

I would love to load heaps of programs on my mini but it has so little memory, maybe if I didn't load the extended rom I would have more room. Or is this area of memory seperate. I had an i-Mate before and never had memory issues, I am always checking if I can delete old files as the memory issue is a big problem.

Is it available for Chinese version on the O2 web site of Hong Kong?
Please advice, thanks!

Could anyone be kind enough to advise me if I have a Chinese Version O2 Mini, can I use this ROM to upgrade my device to English Version ??? Do I just run the exe file or I have to do more (like extract the file and use MaUpgradeUt_noID.exe etc.....) ??????????????
By the way, I am from Hong Kong also...... !!
Thanks in advance !

after the upgrade i face probs with pocketZenphone. ringtones just muted.

can I upgrade from my CHT version??

waiting4u said:
Could anyone be kind enough to advise me if I have a Chinese Version O2 Mini, can I use this ROM to upgrade my device to English Version ??? Do I just run the exe file or I have to do more (like extract the file and use MaUpgradeUt_noID.exe etc.....) ??????????????
By the way, I am from Hong Kong also...... !!
Thanks in advance !
Click to expand...
Click to collapse
ericckleung said:
can I upgrade from my CHT version??
Click to expand...
Click to collapse
I upgrade from CHT to ENG and ENG to CHT without any problem. The problem I have is that I cannot figure out the Bigstorage issue on new rom.

link not working...

The file does not exist anymore.. can anyone upload it again.. need help. thanks

Hi
links not working, is it possible to upload again?
Thanks in advance

Files was just moved to the Magician part of the ftp.
Little bit browsing it would have gain access to the files.
Now corrected the links and files should work again....
Stefan

O2 Rom
Hi All,
Is there any way I can change my Rom version to the latest O2 version, I have a qtek s100 and rom 1.12

Which ROM to use? (I've read tons of old post)

I have read a bunch of post on this but still not finding the answers. So, please forgive me if this is a repeat question.
I browsed thru the ftp site (under the Magician folder), but not sure of which ROM to download since there are so many of them and not sure of which is the most stable version (O2, i-mate, qtek, MDA?).
I have the O2 XDA II mini with the following version:
- ROM version: 1.03.00 WWE.
- ROM date: 11/01/04
- Radio version: 1.01.00
- Protocol version: 1337.38
- ExtROM version: 1.03.166 WWE
Or, should I use the one that I downloaded from seeo2.com site: the filename is:
ma_o2asia_11100_922_11100_ship.exe?
Also, when I update the ROM, would it lock my phone? I bought the phone in USA so I assume the phone is unlock.
Any help and advice would be greatly appreciated.
Thanks again,
William

I'd use the Qtek S100 1.11 ROM (it's what i use now) as it's completely stable (1.12 seems not to be..) and then apply bigstorage to it..

How about the O2 ROM? I'd like to stay with O2 ROM (instead of using the Imate or Qtek ROM). Could anybody point me to the correct ROM to use? I browsed around the ftp but there are so many of them (extrom, bigstorage, modified, shipped). Thanks for the help!
William

BullishBil said:
How about the O2 ROM? I'd like to stay with O2 ROM (instead of using the Imate or Qtek ROM). Could anybody point me to the correct ROM to use? I browsed around the ftp but there are so many of them (extrom, bigstorage, modified, shipped). Thanks for the help!
Click to expand...
Click to collapse
The O2 ROM on their website was put up in May and is v1.11 and it's working OK for me.

I bought a T-Mobile Compact, and someone had loaded the I-Mate 1.11 ROM on there. I kept having a problem wth the GPRS failing to connect. I then upgraded to the 1.12 ROM, and it was even worse. I kept the 1.12 radio, and then downgraded to the basic 1.06 ROM. It is stable, and honestly, I don't see what the differences are besides now I can connect to GPRS whenever I want.
I also applied the bigstorage hack, and only applied the basic extended ROM cab files from 1.12 and the bluetooth patch from 1.06. I received my Compact last week, and applied 1.06 yesterday. So far, no issues have cropped up. Man, this Compact is so much less buggy than my MDAIII. The MDAIII was so feature packed, but had sooo many problems.
Hope that helps.

plz, give me a link to O2 1.11eng, i cannot log to o2 as my iemi belongs to imate, thanks

hbahaie said:
plz, give me a link to O2 1.11eng, i cannot log to o2 as my iemi belongs to imate, thanks
Click to expand...
Click to collapse
I just tried to link it for you but it does not work and asks for a login name and password.
- Peter

Just found this thread which has a link to the O2 ROM:
http://forum.xda-developers.com/viewtopic.php?t=22591&highlight=ftp+site
- Peter

[APP]Blackberry Connect on WM 6.1

Just for your info, I have been using successfully BB Connect (4.0.0.92) with my Elfin and Windows Mobile 6.0 pro.
However it does not work with Windows Mobile 6.1. I have tried with both the Blue and the Shadow cooked roms without success..
Best regards
73

hi, is the bb connect need to pay for the serivce? i want to use due to my business lol thank youl

Vintila said:
Just for your info, I have been using successfully BB Connect (4.0.0.92) with my Elfin and Windows Mobile 6.0 pro.
However it does not work with Windows Mobile 6.1. I have tried with both the Blue and the Shadow cooked roms without success..
Best regards
73
Click to expand...
Click to collapse
Thanks for the info. I'm now hesitating to change my factory ROM to WM 6.0 Blue: did you use BB Connect with 6.0 Blue ROM before? Did it work?

i didn't see there is any bb connect compatible for touch or touch xl in htc.com e club

spam001 said:
Thanks for the info. I'm now hesitating to change my factory ROM to WM 6.0 Blue: did you use BB Connect with 6.0 Blue ROM before? Did it work?
Click to expand...
Click to collapse
Hi!
Yes I am using it with Blue Elfin ROM V3.0 and it works like a charm. Very recommendable.
JohnQ, you can download the BBConnect software here:
http://www.sems.org/entry.asp?entry_id=276
Choose the 4.0.0.92 version.
I would also download and install the Blackberry Connect Desktop for Windows Mobile as it is the best way to activate the Blackberry service in your Touch when you have problems to do it wiressly. Find the link and manuals here:
http://www.sems.org/entry.asp?ENTRY_ID=225
Regards

Vintila said:
Just for your info, I have been using successfully BB Connect (4.0.0.92) with my Elfin and Windows Mobile 6.0 pro.
However it does not work with Windows Mobile 6.1. I have tried with both the Blue and the Shadow cooked roms without success..
Best regards
73
Click to expand...
Click to collapse
hi all,
i am using BBConnect 4.0.0.92 with wm6.1 and it ran effortlessly.
cheerios...

@Vintila
thank you so much. but im afraid i cant use it coz im using WM6.1 ROM lol

Are all your phones CDMA or GSM??

Gsm Touch Xl

Hi
It seems that 4.0.0.97 will only work on release ROMS, it hates cooked ROMS and will connect for about 3 seconds before disconnecting.
If you get a connect for a few seconds then the connection drops it is because you're using a cooked ROM.
My P3450's blackberry client only works on WM6.1 release ROMS.
I'm currently running 4.0.0.97 on the following:
Device:-----------------HTC Touch P3450
ROM Version:------------2.20.707.1B WWE
ROM Date:---------------10/02/07
Radio Version:----------03.12.90
Protocol Version:-------4.1.13.56
Cheers
Leon

I am using Touch(Elfin) with Shadow 2.1TE,
and I just manage to get BB Connect 4.0.0.92 to work!!! Hurray!

BB Connect
Hi,
BB Connect works like a charm here (plz pay attention to wm standard and wm pro versions on www.sems.org). I am using 4.0.0.97 on wm6.1 pro (tested on these roms: merlot, blue elfin) ....
the trick is:
1. Install a regeditor (e.g. PHM Editor)
2. Change the reg-key HKLM\System\Versions - Aku to .0.4.2 (yes, with starting dot)
Install BB connect ...
CU
A.

abyss02 said:
<SNIP>the trick is:
1. Install a regeditor (e.g. PHM Editor)
2. Change the reg-key HKLM\System\Versions - Aku to .0.4.2 (yes, with starting dot)
Install BB connect ...
CU
A.
Click to expand...
Click to collapse
In my case I didn't need to do an RegEditing as my ROM is a release ROM and it already had the AKU setting but that is a very good point indeed!
Yours
Leon

abyss02 said:
Hi,
BB Connect works like a charm here (plz pay attention to wm standard and wm pro versions on www.sems.org). I am using 4.0.0.97 on wm6.1 pro (tested on these roms: merlot, blue elfin) ....
the trick is:
1. Install a regeditor (e.g. PHM Editor)
2. Change the reg-key HKLM\System\Versions - Aku to .0.4.2 (yes, with starting dot)
Install BB connect ...
CU
A.
Click to expand...
Click to collapse
Hi All,
Confirmed. It works after you change the regkey BB starts to work smoothly! I'm using WM 6.1 HTC official WWE version ROM
Thx the hint.
Br,
Tg

Hi
I have tried it on apparently official WM 6.1 pro HTC WWE version ROM
R 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
I was installing BB 4.0.0.97
Change settings as above and it didn't work..
Can anyone post the link for a WM 6.1 pro that they know (tested) it will support bb connect.??
Thank you
Edit: I've got TYTN II and 4.0.0.97 was working perfectly with factory WM6.0

hi all,
i have managed to get blackberry connect 4.0.0.97 working on a hermes 300 with a cooked ROM "MRH 6.3 Rainbow" using the regedit method, the rom is a 6.1 rom
however i am getting strange extra mailboxes on my device with hex names similar to the issue that can become apparent if a blackberry user was to accidently install the BES software on to their computer then sync. where the device trys to register itself with a BES and fails
anyone got any idea what is going on here? as it has me baffled
***edit***
i also get an error message telling me that there is not enough storage, and that i should delete some messages when the service books are sent down to the phone

inergen said:
hi all,
i am using BBConnect 4.0.0.92 with wm6.1 and it ran effortlessly.
cheerios...
Click to expand...
Click to collapse
it didn't work with me , htc diamond touch..it freezes the phone couple of times and i had to hard reset!!

the new version of bb conect works. its version number 4.0.0.103 available via this link
htc.com/us/mobile/connect/8925

4.0.0.103 & Aku
Hi,
The 4.0.0.103 version is not working in my Elfin with Aku .0.4.2.
Would you mind yo check your Aku number?
Thanks a lot

Anyone know if this will work with the VZW XV600 (aka HTC or UTStarcom 6800)?
If so... which BBC should i use and are there any modifications required?

[ROM]HTC Touch English ROM Code Update

Finally cooked my first ROM for my ELFIN (GSM)!! So please be kind..
thanks to ELF(in) Hybrid Kitchen v2.0.7
Windows Mobile 6.1 and next generation TouchFLO™
Windows Mobile 6.1 Professional
CE OS 5.2.1.19972 (Build 19972.1.2.7)
© 2008 Microsoft Corporation.
should I include a Screenshot? I don't think so .. you've seen Manila right? so just take the SS from there..
This is a SHIFTED ROM - (SOUTH EAST ASIA - (Philippines))
http://www.htc.com/sea/SupportDownload.aspx?p_id=88&cat=2&dl_id=421
I have a valid Serial Number
htc.com said:
Summary: Update HTC Touch (ROM 256MB, RAM 128MB version) to Windows Mobile 6.1 and next generation TouchFLO™. ROM version: 3.07.707.02 WWE; ROM date: 10/25/08; Radio version: 03.34.90 Protocol version: 4.1.13.71
Click to expand...
Click to collapse
i think this is for Vague? but I want it in my ELFIN! I keep getting a INCOMPATIBLE MODEL ID! so, after a lot of die-hard trying but so what.. here it is! a very very Clean ROM (I like clean ROMs, make me feel at ease )
This is a CustomRUU, I think that means, you should have your CID unlocked! and for all those WM6.1 fans.. here's your ROM
http://uploading.com/files/167a8da2/RUU_signed.nbh/
does anybody have a WM6.5 CLEAN!!! for QVGA? Built around 23017? I don't like the 23047 taskbar!! YUCK! I don't think Microsoft released that kind of taskbar, it's awefull and stupid.

What version of manilla is it? Thanks.

differences in official roms?

I have this machine:
HTC Touch Cruise - Windows Mobile® 6.1 Professional Upgrade (for HK WWE)
I can get the rom from their site Release Date: 2009-02-09
Upgrade operating system to Windows Mobile 6.1. ROM version:3.19.831.3; Radio version:1.59.42.15
But in the non HK site, it says Release Date: 2009-08-30
no other details, but a long list of Improved Functions and Fixes
but my SN says not supported for this file.
So are they the same or not? What's the diff? Since there's no special non Eng support in it anyway...
I have HardSPL, looking to downgrade from 6.5

On my foon work's latest HTC rom 3.13.404.0 NLD 8/24/8 from ther site, its semes to be a older number on my foon than your's, language make the different rom nubers ?
The file cames to me from HTC = _HTC Touch Cruise_RUU_Polaris_HTC_NLD_3.13.404.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe