disabling the 'black' text line above the input line? - Touch Pro, Fuze General

Hello friends,
is there a way to disable the black text line in TP that shows the letters typed in? it seems to cause a massive delay in text input.
The best would be if i could revert to the "old" WM 5 or even 2003 when the text is input immediately into the message, and in case complete option is enabled then the words are on the screen and not in this black line.
Thanks in advance.
udi

You want to disable eT9. Go into the registry and change to this:
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
then soft reset. that disables eT9 and leaves you with the windows mobile standard IME.

Da_G said:
You want to disable eT9. Go into the registry and change to this:
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
then soft reset. that disables eT9 and leaves you with the windows mobile standard IME.
Click to expand...
Click to collapse
I do'nt think you need to go into the registry settings? Just open up the onscreen keyboard, and switch from T9 --> ABC

Thanks a lot Da_G for understanding what i wanted (although my poor explanation) and the great solution - works like a charm.
Just turned the TP from great to perfect machina.
Thanks,
udi

Related

Tweaking Asus P525's T9 default input to Abc

does somebody here know how to tweak the registry to make the T9 input of Asus P525 default to 'Abc' instead of 'T9 English' ?
and also, how to make the T9 as default SIP after a soft reset instead of the keyboard?
bumping up
In the download area of Asus there's a small tool that sounds like it does something like that. Sadly direct links aren't possible. You can find it by pressing "Download" in the upper menu of www.asus.com, selecting PDA/PDA/P525 + press Search, then click on "Utilities". Now there's a "T9 Disable and Enable Utility".
I haven't checked it myself yet...
btw: Do NOT install the firmware update that's on the same page, unless you've got or want a french device...
boybi said:
and also, how to make the T9 as default SIP after a soft reset instead of the keyboard?
Click to expand...
Click to collapse
Don't now the registry entry right now, but you can always activate the T9 input by pressing the * key for some seconds.
i know the T9 Disable tool you're talking about and I know how to activate it. but right after activating the T9, you still have 4 options:
T9 English - predictive text input for English language
123 - for entering numbers
Symbols - for entering symbols
Abc - for entering words other than English.
whenever i'm going to type something, like SMS or notes, the T9 always defaults to T9 English. what i want is for it to default to Abc.
i hope somebody here can help me find the registry entry for this.
thanks in advance.
hi boybi,
did u managed to find out how to do it? let me know if you already have the answer. thanks.
vibranze
Nope, still haven't figured out how.
i found a reg tweak here:
http://asusmobile.net/board/viewtopic.php?t=81&sid=17cac3464d181a9c21eadaa38b7608f7
haven't tried it yet...

tegic xt9 crash course? how do I add new words?

How do I add new words using xt9 in the excellent wm6 rom? I've managed to install and use scandinavian t9 (and also managed to re-enable english, since it disappears when installing scandinavian t9 ;-)). But I can't figure out how to add my one words. Does anyone have a manual?
All you need to do is change to ABC input, by holding the *t9 key (bottom left hand side key) and selecting ABC. Then type the word you want. Next time you input with XT9 you will see that it has learned your word.
Thanks, man. It works great. This explains why I've managed to store some words and not knowing how.
How can you enter hundreds of words into the database simultaneously????
I use winmo 6.1 btw...

keyboard - AUTO suggest works freeking annoying

Okay,
so i am trying to type some messages example i type in " tty " and want to press space, but the freeking keyboard when i press space add the word
" ttyl8rt" which i dont want.
I go into settings. Input,, i take out suggest works when entering text
and it still does.
its like it can't keep settings.
or something wtf
habs101 said:
Okay,
so i am trying to type some messages example i type in " tty " and want to press space, but the freeking keyboard when i press space add the word
" ttyl8rt" which i dont want.
I go into settings. Input,, i take out suggest works when entering text
and it still does.
its like it can't keep settings.
or something wtf
Click to expand...
Click to collapse
Try do de following it worked for me.
go to input method and choose touch keyboard
settings
x9 setting's and disable all the possible marks
voila
done no more sugestions words
I had the same problem but thanks to you now is ok
Thanks mate
it took me 1 week to find out
jaqubek said:
I had the same problem but thanks to you now is ok
Thanks mate
Click to expand...
Click to collapse
Many thank for your help,
I got the same issue and tried your solution with no success. I've done a soft reset after but no change. I still have the black ligne with suggested words when using keyboard, touch keyboard or Calligrapher Write Pad.
XT9 Settings are all unchecked.
This bug is really annoying has it prevents me from using Calligrapher SIP correctly...
Any other idea ?
If you like to disable completely.
Disable XT9
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
"Keyboard Layout"="00000409"
You will need to soft-reset the device after the change.
For enable XT9
Default is this:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\\windows\\eT9ime.dll"
"Layout Text"="eT9 IME"
"Keyboard Layout"="00000409"
Thanx, I was looking for long to disable this freaking option
actually htc posted a cab file to change the default input to ABC instead of XT9. it's meant for touch dual but i tried it on my cruise and it worked fine
Many many thanks it works fine !
CAB file didn't work for me...
LDemet: theres a cab file on Asus website that disables T9....
raggastani said:
actually htc posted a cab file to change the default input to ABC instead of XT9. it's meant for touch dual but i tried it on my cruise and it worked fine
Click to expand...
Click to collapse
thank you man!
raggastani said:
actually htc posted a cab file to change the default input to ABC instead of XT9. it's meant for touch dual but i tried it on my cruise and it worked fine
Click to expand...
Click to collapse
Works great on the 614C, thanks for that, the XT9 was driving me mad!!!!!!!
Thank you. I finally get rid of it!
If you want the old word suggestion format back... here is the details:
Thanx to LDemet from post :
http://forum.xda-developers.com/show...26&postcount=6
I changed my reg to reflect the following settings
"
If you like to disable completely.
Disable XT9
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
"Keyboard Layout"="00000409"
"
and then soft reset, presto! my old wordsuggestion is back!...
Thanx LDemet.!!
Please can you put the correct link to the old xt9???
it´s very important for me, thanks a lot
Thankss
This cab file helps me alott... XT9 has been bugging me .. searched for 6 months to get this program (abc as default). I tried to download from HTC site once, but it change the function of the keypad to numbers only. I finally found what i really need...
thanksssssss
Thanks!!
I've been searching for this for a long time!
The cab worked nice!
Thanks for sharing.
finally
Wowww... I'm a very newbie on this forum.. I get d address of this forum from HP call center..
I've been searching for a month to kill this freaking-annoying xt9, and Finally i got it..
Thanks a lot for posting..
LDemet said:
If you like to disable completely.
Disable XT9
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Layout Text"="COMP IME"
"Ime File"="compime.dll"
"Keyboard Layout"="00000409"
You will need to soft-reset the device after the change.
For enable XT9
Default is this:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File"="\\windows\\eT9ime.dll"
"Layout Text"="eT9 IME"
"Keyboard Layout"="00000409"
Click to expand...
Click to collapse
Wohooo! -you rock LDemet!!
raggastani said:
actually htc posted a cab file to change the default input to ABC instead of XT9. it's meant for touch dual but i tried it on my cruise and it worked fine
Click to expand...
Click to collapse
This software works for my HP Ipaq 614c. Removes the annoying XT9 and makes abc as default. Fantastic Software. Thanks Man.

Customize SIP list.

Are there any tools that can customize the Software Input list so that it's not such a mess choosing what input I want to use?
I love having all the options the Fuze gives for inputs, but I personally like using about three different types of input depending on the situation the rest are mostly in the way 99% of the time. I mostly use Block recognizer, Japanese input, and Full QWERTY, in that order. The problem is that two are in a sub menu, and if I go into landscape mode the issue is compounded by not enough room and up and down arrows.
As it stands my list of inputs are:
Touch input settings
English *w/ sub menu
Phone Keypad
Compact QWERTY
Full QWERTY
Block Recognizer
Other *a sub menu leading to:
Options
Block Recognizer *again*
Japanese Input (added by .cab)
Keyboard
Letter Recognizer
Transcriber
I'm not sure if it's a "smart" menu because I don't remember Block Recognizer being on the front page at first.
It would be great if there was a program to re-order this, or a reg edit we could make to rearrange things.
For one, why is the language option at the top of the list, do the majority of users need to change back and forth between languages that much? I don't even really know what it does, different spell check I assume?
Options and settings are great but they can be in the back, one they're set right I don't change them anymore.
And for marketing purposes I can see why the legacy inputs are shuffled to the back in favor of the latest and greatest, but for those of us old school users who started out on Handspring Visors and Palm III's we want out familiar inputs without having to hop through hoops.
And the Japanese input isn't something that can be duplicated in other ways, you can't lookup unknown Kanji with a keyboard. Meanwhile the front screen has 3 of it's 4 input methods taken up by keyboard inputs that are really just variations on the same thing, on a phone that has a real slideout keyboard to boot.
I'd really like a way to fix this so that the most diverse inputs that go beyong the physical keyboard are on top, in front. And the multiple redundancies for the real keyboard are in the submenu or on the bottom.
It takes just a few reg edits to customize the SIP list.
[HKCR\CLSID\...]
(HTC SIPs)
{198D503A-...} = Phone Keypad
{36BC8FF6-...} = Full QWERTY
{62B00599-...} = Compact QWERTY
(MS Default SIPs)
{42429667-...} = Keyboard
{42429690-...} = Letter Recognizer
{42429691-...} = Block Recognizer
{F0034DD0-...} = Transcriber
(Japanese IME SIPs)
{0CBEA010-...} = Tegaki
{1D07E4B2-...} = Kana
{BB6E8371-...} = Kensaku
{BDE4F120-...} = Romaji
Under each, you will find a key IsSIPInputMethod with string (Default) = 1. Change any of them to 0 to disable the SIP.
However there are some annoying caveats. Stock and most cooked ROMs use HTC's eT9 IME by default which gives you the fancy Diamond-themed pull-up list (to match TF3d). The eT9 IME reserves 2 spots in the list for HTC SIPs (as noted above), so if you disable all three HTC SIPs you will get 2 blank/black rows in the menu. I don't think there's a way to customize the exact order of the SIPs either, they simply appear based on which ones you previously selected. And I also don't think you can remove the Language selection sub-menu. You can change which options are available (ie: remove English, French, German, Italian, and/or Spanish), but you can't remove the submenu entirely.
There is one cooked ROM (can't recall which) that has the eT9 IME and all HTC SIPs removed completely, leaving you with the standard MS IME list (just a simple popup list, no fancy TF3d-themed list), but it also removes almost all extra HTC software leaving you with a barebones ROM.
Fortunately, PQzII makes life a little bit easier by letting you choose separate default SIPs for portrait and landscape modes (which also overrides the default SIP after a soft-reset). You will still probably need to dive through the list once in a while, but at least PQzII coupled with removing any SIPs you don't use will clean up the list and make it a little easier to find and switch between SIPs.
hi
since I have WWE ROM with European languages that I don't need, I would like to remove the keyboard layout for Czech, German exc'
do you know which registry values I have to change in order to achieve that?
I just did that a week ago. Use the "Input Methods" feature in SKTools to remove what you don't want to use. When removing the SIPs be sure to specify one of the remain SIPs as default. Also, be sure to select "remove from registary" also. This will make sure that it does not show up again.
The registary edit that is listed above does the same thing SKTools does. Also, as listed above, if you delete one of the HTC SIPs, like Compact QWERTY or Full QWERTY, you will end up with a blank spot in the selection screen. I am still trying to figure out how to get rid of that...

default registry for HKLM\System\CurrentControlSet\Control\Layouts\e001 0409

was trying the tweak for logmein so i could use the hardware keypad - thought it didnt affect soft keypad when using the phone normally - so now when i use phone keypad on touch screen - im getting numbers only - and this sux for contact lookup and typing sms when i dont want to open the hardware keypad.
any help with default for
HKLM\System\CurrentControlSet\Control\Layouts\e001 0409
i seem to remember it was very similar to the tweak which was
Ime File = \windows\compime.dll
Layout Text = COMP IME
like just removing the space or something but i cant seem to get it back....
any help appreciated in advance.... thanks
obviously i need to use the KforTouchPro approach to this problem
If you still need this, its:
Ime File = \windows\xt9ime.dll
Layout Text = XT9 IME

Categories

Resources