Database Info

weird text message. helppp

i just bought my tilt, just flashed to dutty v3 room and now i get a weird text every 4 mins. the number is 111145643 and it says wvi1 1.1 1111. is there anyway i can stop that text?
thanks!

Hmm I think you should call your carrier. Unless your phone is somehow sending itself a message, the kaiser probably isn't the culprit.

did you have express mail setup? if so you have to reinstall it on the phone then log onto the express mail server and delete the connection that you made for push e-mail or turn off push, then uninstall express mail on the phone and reset. you should be OK

^^I stand corrected!

I think that is for the IM+ program that ATT provides on their roms for im. The company is called wireless village i believe. I was bugged by it for a while, well the full hour I had my device before I flashed schaps!
I use Palringo until trillian gets a clue about wireless devices. It can sync with AIM, Yahoo, MSN, Gtalk, and others.
BTW, It uses data instead of sms to send messages like the IM+ does.

i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.

gimini said:
i had the same question but alltheway awnsered it for me already... its kind of a side effect of flashing sometimes. it will go away on its own. i think i got it like 8 times and havent had it since.
Click to expand...
Click to collapse
its not necessarily a side affect of flashing, it can go away if you reinstall the app that was on the old rom that is causing it... its something that was installed on your previous rom that used silent sms to alert the program to perform a specific function. LIke PTT, expressmail, or the cing/att IM client (to tired to remember the name)... When these programs are running your phone will recieve a ghost message that is only read by the app to wake it up. Alot of these problems were seen in the hermes thread and PTT.

Nope....That is what you get when someone tries to PTT you. Without PTT you get an SMS message. The way PTT works is basically Voice MMS messaging with a trigger to open & close the voice connection (PTT Button) Those digits you see are altered SMS addresses, they are altered so that PTT can recognize them & shift it from SMS to PTT.
Agin, whenever you kill PTT, you lose the ability to decipher the modified address & hence, it's received as a MMS instead. The reason you keep getting it is because the request that was sent retries a certain number of times before failing.

why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE

Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Well, that would make Dutty's never ending post even longer. We should save that post for other problems directly regarding the rom, and comments on new updates.
Beside, I believe the problem has nothing to do with Dutty's V3, it work flawlessly for me.

I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..

Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
Martinhdk said:
why dont you ask that question in the correct thread....the one that deals with your rom??
TRY TO THINK BEFORE EVERY FILLING THE FORUM WITH THREADS THAT COULD BE ASKED ELSEWHERE
Click to expand...
Click to collapse
Wow man take a breath! Your gonna get an ulcer.

to his defense i havn't seen this question in dutty's thread at all. and i've only seen it once but not onthe kairser forums. so cut him a lil slack. plus we all learn something from it...ptt or express mail can cause this. thats sure something i didnt know. hope all is well now...enjoy your device sir.

This question was answered on the hermes forum. That is how I solved my issue. I still believe it deals with the IM app from att that uses wireless village. Ill try to find some links to help get it solved.

I couldnt find the thread in the hermes section that described the issue. It might be from OZ messanger and not IM+. It is the version that comes preinstalled from the ATT rom. It is designed to use sms to im therefore making ATT more money.
I had the same text messages when I first got the Kaiser and ran the im software. I believe my test message had a different set of numbers at the end.
Here is a link to Wireless Village. They are a group that is promoting interoperability between handsets for a variety of functions (IM included).
http://www.openmobilealliance.org/tech/affiliates/wv/wvindex.html
EDIT:
I found this article from the cingular...er...ATT forums. This is the issue I originally had and the same text from the same number. The issue below is because OZ messenger was closed and not properly exited.
http://forums.cingular.com/cng/board/message?board.id=samsung&message.id=16362
I spent all day yesterday figuring this out. I downloaded and install the .cab file to my storage card and then logged into the IM program (OZ). After signing out, it kept me logged into all 3 services (Yahoo, AIM, and MSN) and then I proceeded to receive 40+ text (SMS) messages b/c it was trying to "reach me". After sitting on the phone for about an hour and half with a great Data Service Tech Rep, we figured it out and now the IM program works just fine.
~
I'm getting the message from 1111470400 and all it says is WVCI 1.1 333.
~
LISTEN IT KEEPS TEXTING ME AND IT WONT STOP.
HERE IS THE NUMBER ITS FROM AND WHAT IT SAYS
1111470600
WVCI 1.1 333
Click to expand...
Click to collapse
From the 8525 forum
http://forums.cingular.com/cng/board/message?board.id=samsung&thread.id=33273&view=by_date_ascending&page=1

Martinhdk said:
I am just so tired of more or less stupid questions that constantly are repeated because newies does not take their time and READ before starting threads and asking questions. This has to stay in the DUTTY thread - my opinion.
We shouldnt end up in a new HERMES forum with all the noise and bad mouth it had last year
I do not have anything against stupid questions in general - just do some searching and reading first..
So welcome all - lets use SEARCH some more..
Click to expand...
Click to collapse
You know - Generally I don't get into these types of little spit / spat arguments - but today you have caught me at the perfect time.
Martinhdk - you are the type of person that makes dealing with the public so hard. You complain about things that aren't even worth complaining about. Sure - it was Dutty's ROM, but in essence had absolutely nothing to do with the ROM, it's probably the push to talk causing the issue. (Because I have the same issue) You had to try and prove yourself by spouting off and telling someone how to run things, when really, you were in the wrong.
Sometimes people get anxious and maybe don't do as much searching as they possibly should. Big DEAL - you are in a forum and since forums began it has been a problem. Does this require that you lay into the guy and tell him how stupid his question is? NO, it doesn't. You must be one very unhappy individual who probably lives a very lonely life - do us all a favor, in the future; keep your comments to yourself and let the moderators do their job.
I apologize to XDA - I know this thread / forum is not used for this. I just feel that sometimes these guys who insult someone younger / or maybe just not as experienced have a tendency to scare these guys away and I don't feel that is right.

i had the same exprience , its not the problem with your carrier , its the ATT IM+ app , if you exit the app w/o logging out of messenger app you keep getting this wierd msg , i tried unintsallng the app but no luck , finally i relashed a new rom and the error went away.

SOLUTION
What you do is you sign in to AIM at a desktop computer, the screenname you signed in on your phone. than a message will pop up saying you are signed in at two places and if you reply to that window with "1" it will sign you out at the other location, your phone. that should stop the messages.
the AIM service on your phone used txt msgs and when you close the program without first signing out. it usually causes that problem.

Stealth message?
I've heard of this so called "stealth" text message used by the carriers to send commands to the phone. My next question is - is it possible to send one of these so called "Stealth" messages from a phone to anther phone - with the proper instructions encoded in the text msg to automatically appear either on the users screen or in their inbox? I have heard this is possible but am very interested if someone could provide me a little more insight on it....

It's possible, it's been done. Would you like to know how? How do you want to send the malicious code? BT? WIFI? MMS? Maybe I can get you my bank account number & ssn while I'm at it?
There are other forums for that type of stuff, some proggies to do this are actually security auditing tools. Most all means though require the user to acknowledge receipt of whatever you send & then require them to execute it. However, I sincerely doubt that anyone here is going to give you any means to do something that may harm someone's device. Sure, you just want to play a prank, but how about the guy you then teach it to?

Receive MMS, shows phone number, not name?

I know this may have been briefly covered before in Dutty's thread, but 300 pages are a bit more than I want to re-read. Also this issue is present in the official HTC 6.1 rom.
When I receive an MMS from someone, it will either start a conversation with their phone number (even though they are a contact), or it will take an existing conversation and convert the name back to the contact's phone number.
I thought I read there was a way to fix this by formatting the phone numbers a certain way in your contact list.
If someone could tell me how to fix this, it would be great. Also a program that changes the format of phone numbers in bulk would be great to, if that's really what I need to do.
Apologies if there is a thread like this somewhere.
I assume everyone going to the 6.1 update will have this issue. I would imagine a sticky would be quite useful for this, unless there isn't some other kind of 6.1 sticky on issues already.
-James

The ones in my addy book in this format +15555555555 show up with the name most of the time. Any other format they just show the number. It seems if i have no other messages from the sender, even formatted like above, they will just show the number. As of yet, I have found no easy way to fix it other than changing all my contacts.

As you have stated that there is a discussion about this in an existing thread you need to do into that thread and use the search function found next to "thread tools".
If you want to extract that info from the thread and either update the wiki or create a new "[SOLVED]" thread with it in the first post the whole community would be grateful.
Please don't create a new thread asking someone else to get the answer when you already know where it is.

Problem with ATPlugininstaller....

I have an interesting problem with ATPlugininstaller.
I installed chome editor v1.6 on my wm6.5 device.
At first it was working fine, and I created 2 plugins using it.
THEN, I decided to add the "day of the week" to the clock panel, by placing code directly in the titanium.cpr files.
Well, the weekday was added successfully, BUT now, I CAN'T use chome editor to create new panels, and I CAN'T install any plugin that uses the ATinstaller.
Whenever I try to do either, I get:
"An unexpected error occurred in ATplugininstaller
ATplugininstaller.exe unauthorized access exception
At System.IO._Error.WinIO error()
At System.IO.FileStream..ctor
At System.IO.FileStream..ctor
At System.Xml.XmlTextWriter..ctor
At System.Xml.XmlDOMTextWriter..ctor
At System.Xml.Xmldocument.save
At ATPlugininstaller.Main.AddLayout to cpr()
At ATPlugininstaller.Main.Main ()
As I said
, I get this same message when I try to create a new panel or add any cabs that require the plugin.
However, the panels I already created and the plugins I already installed still work fine.
My question is, why? My manually adding the code into the cpr files to show "day of the week" on the cclock panel is no different than the entries the installer makes when I install a plugin, or create one using Chome editor.
I know, I've looked thru the cpr file content. So, why does the installer crash AFTER I add the code for "day of the week" to the cpr files?
Can someone please help? Thanks.

Moved, nothing to do with development.

Ok then where do I put it? The ATplugininstaller thread IS in this developmen section, so I beg to differ with you.
I put it out here after getting no response to my inquiry in that thread.
This is one responsive board, out of 10 or so inquiries I've posted, I've only received 2 responses, all from from the author of one sw.
This is a real HELPFUL board,, I've got to say.
And, my inquiry, to remind you, HAS to do with development because I'm creating panels in Titanium using xml.
If the particular sw in question is in this section, then my inquiry as to why it crashes deserves to be here.
I guess it doesn't matter, the members on this board are of no help whatsoever. It's a waste of time to even post.
If I sound frustrated, it's because I am. I have no desire to get flamed, but I need help, and no one even answers.

No need to get frustrated .
Your thread does not belong to the development and hacking forum, that foum is please read the rules of D&H here.
Someone can only help you if they know the solution to your problem, no need to blame the users or the forum itself. Posting in the wrong section will not be helpful to you and will add to our work.
And if you really think posting here is a waste of time, why bother posting ?.
I have moved your thread to Q&A forum, which is regularly visited by developers and people with great knowledge in this field, patience is the key; not blaming the users of the board or being sarcastic.
As far as development goes, you are welcome to post your work ( pannels for titanium ) when they are ready, but not questions.
Hope you calm down, and not repeat such bursts of frustration. You could consider this a warnning.
Please read this carefully:
2.3 Flaming: XDA was founded as a group of people sharing information about certain mobile phones. Sharing does not involve virtual yelling (flaming) it does involve working together to solve problems in an environment of mutual respect and understanding. Losing your temper and flaming another member, or group of members, is not acceptable behavior.
Click to expand...
Click to collapse
I do understand your need for help, but calm down and have patience, try searching or contacting XML writers/developers.
Hope you co-operate.

Understood. I had to do some venting because of all the nonresponses. Can you at least tell me where you moved my post, or did you just delete it? Thank you.

Thank you for your co-operation.
It has been moved to question and answers senction under the general section.
Many people come by here, surely someone will answer; if they have a solution.
madnish30.

just try it with TICS instead of ATPluginInstaller
(link in my signature)
there you don't need a hardcoded .plg and you have the possibility for pre-/postinstall scripts.
Also more definite error message, if you get in trouble.

[Q] Unread text not showing

Alright, hopefully someone can help. I am running a WVGA HTC Imagio with WM6.5 and a NRG custom rom with sense 2.5. I just recently installed and then removed the newest HTC Messaging Client. Couldn't send or recieve MMS messages. Thats all fixed now, but, whenever I get a text or MMS message, the notification bubble shows in my top bar, but nowhere else, not even my unread notification on Sense. It does show up in the standard lock screen (HTC's) however.
No, it doesn't show up in Titanium either, just shows 'no new texts'.
It also doesn't show up when I use ThrottleLauncher, iPhoneToday, Infinity, Androkkid, or Home2.
So, it shows up in the lock screen, but no where else. Any ideas?
also, why is my tag or whatever showing that 'OP' thing?

anyone got anything?

Theres got to be someone that can help out there!

Alright, got a little more information. I checked HKCU/System/State/Mesages/SMS/Unread and the 'count' register. When I send a test text, it doesn't change, it stays at 0. BUT when I change it manually to '1', then it registers in all my systems (TL, iPT, Sense 2.5, etc).
But when I remove the '1', its back to where no notifications other than in the top bar and lock screen are given. I do get the usual message notifications via sound and vibrate as well.
So, does anyone have any idea on why it works for the lock screen and top bar, but not in sense or any other UI?

Mister, you are in a habit of posting multiple threads about the same thing at different places.
If you are not getting any answers maybe there is no solution.
PM'ing me won't help you.
D&H forum is meant for posting Development and hacks not for asking for solution.
Please read the posting rules.
And you had already posted the above question here and then re-posted it in D&H which is breaking the XDA Rules.
As i said that your problem may be related to the ROM or the messeging client, try and post in the ROM thread ( that is the the Thread from where you got the ROM which is currently installed on your device ) or the messeging client thread.
I did not move your thread i closed it ( the thread which you posted in D&H this one )and so will i close this one.
Please post in the correct places Only.
And also your thread ( the one i shut ) did not get "lost" if you would have just gone to your profile and seen the threads created by you you would have found it.
Please read the rules carefully and follow them.
Do not break them.
You have broken a rule, consider this a warning; you may earn yourself a vacation from XDA on breaking a rule again.
madnish30.

[Q] Forum Question, Subscribed Forum not showing.

Hi There
I has subscribed to a few forums (like HTC Tytn2 Android Dev) and they show in my control panel fine, but one doesn't, its the "HTC Vogue Andriod Dev), this refuses to show up, even when there are new posts.
I noticed its tucked away in the 'Legacy' section of this website, I don't know if this has an affect on its behaviour.
So how can I get this forum to display in my User CP, like the rest. BTW threads in that forum show up fine, just not the forum itself.
I would like this to work, because this forum is so hard to find, now that its tucked away, it doesn't appear in the 'jump to' list at all, so I need a short cut to it, so I thought subscribing to it would help.
Please can you help me here? As I am keen to keep up to date with the Kiaser and Vouge Android developments.
Thank you
Leona.