Hi ppl, this is my problem i updated my prophet with the g3 update rom, it worked ok, the problem was that after it made the update and the device rebooted it became with the 3 colours on screen, my microsoft active sync could not syncronize with it and right know i cannot work in any way with it please help me... I made the update with the g3 rom of mobiz, i didin´t get to the second step.
Now i Know how
1. Install original Rom
2. Do an update to the rom to wm6
3. Do an hardspl g3 or g4
4. Install a new Rom with RUU update utility.
just where to find original rom ?? ? i have the same problem
Related
hello,
I recently upgraded to the lastet ROM (2.15.13.27 wwe).however a certain application won't work properly after the upgrade.Since this app is important to me,I am thinking of reverting back to the old ROM.I tried searching at dopodasia but couln't find any.Could someone please tell me where I can find an archive of old ROM for the Dopod 818pro.
go register here & u can dload the roms
http://www.dopodasia.com/Dopod_en/member/login.aspx
Hi everyone,
I have a big problem and I need urgent help please. I have ATT 750 unlocked and I'm outside the States now. My Treo was 6.0 then I upgrade it to 6.1 so far so good.
Then I saw a custom rom that I thought it was interesting. the custom rom was for HTC Dimond I think. without paying too much attention. I started the upgrade. It went 70% before the upgrade crashed.
Now my Treo is not responding to anything. I have the original ATT 6.0 SD upgrade and I have the 6.1 lite upgrade. I'm using CheetahUnlocker to flash the SPL (that is working) but when I try to install the 6.0 or 6.1 using Kaiser Custom RUU v1 it crash.
I saw the post above that suggest to place the original 6.0 on a freshly formated SD and install from there. that is not working either. when I try to install the software it goes into these steps before it crashes: btw, I have the tri-color bar and it has the following info:
CHEE100
IPL-0.20
SPL-1.40.01iNex
while update in progress i see the following:
CHEEIMG.nbh
SPLASH1 - OK
BOOTLOADER - OK
GSM - OK
MicroP - OK
EXTROM - Fail
OS -
After the crash I get this msg: "Update Terminate Update Failed"
Any suggestion please? need more info? then let me know
You may have corrupted your DOC, you may need to use mtty to reformat it. Do some searching on how to do it.
Or try to use T750URT.exe to restore it, it comes with the Treo desktop updater.
similar problem
Hey guys,
After I flashed a WM6.5 costum ROM in my treo750 it works fine...until 4 hour after...the display just stay black. It´s on, but black!!
I´ve tryed reset, hard reset and force to reflashed to an original WM5.0 without success.
Does anyone know what is happening with my phone??
Thanks
i need help to flash wm 6.5 rom i've downloaded from here
can anyone one tell me how to do it in simple steps?
i don't know anything about roms
i didn't do any upgrade to my htc s710 device before
last thing my device has sim protection (sim unlocked)
thanks
first:
follow steps here:
USPL
second: download the rom you wish to use and install it same way as you installed hardspl!
3. finish!
thank you hashtowent i did as u said
and i finally got wm6.5 in my vox
and thanks to everyone here on this forum
i learned alot here about my vox
thank you
Hi Hashtowent,
Any idea why I am still stuck with ERROR 270 only with the WM6.5 in my E650? (I also followed your links and suggestions)
THX
Ant
Hi,
I tried today to update my VOX in rom WM 6.5 but I have the same problem as Antanico...
Someone can help me ppllleeeaaasseeeeee ???
Many thanks
No ?? Pleasseeee
I tried to follow all steps in USPL guide but still the same....
I have for now the ROM WM 6.1 from LeFab47 alias Fireburned
Guys... I had the same problem in my new VOX...(didnt have this issue in the older one)....
Jockey was considerate enough to point the following to me...... Used it and everything was absolutely fine....No error 270 etc...
There is one alternative to application unlock your phone. To properly application unlock the phone perform the steps as suggested to me by another friendly customer:
1. go to
http://www.modaco.com/index.php?s=&s...dpost&p=825304
2.Run MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB on the device
3. Run MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device and
reboot.
This will solve your problem...if it doesnt....lemme know ..
thanxxx
Hi,
Many thanks for your answer but but but after run the 2.cab I still have the same result ;(
Whhhyyyyy mmeeeeeeeee !!!!
Just te be sure, i must follow steps in this order right ?
1°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack.PREP.CAB
2°) Launch MoDaCo_SPV_E650_de_Brand___Fix_Pack_0.5.CAB on the device
3°) Restart
4°) Launch uspl_116_jockyw.bat
5°) Update ROM with "vox-USPL"
6°) Update ROM with custom ROM
???
after step 3...
try running the application unlock sda...
maybe will solve your problem
if it doesnt.....i will let you know another solution
thanx
.....same.....
Is it normal that at the end of step 4 I have the sceen with the tux after screen green, red,... and after nothing happend I must reboot the phone myself ??
All is OK nowwwwwww.
Like a newbie after step 4 I shut the phone instead of launch directly step 5.....
Thank you Indtram for your help
hi, i can't upgrade to windows mobile 6.5 because "error 270".
And when i launch the uspl, my vox shutdown and i restart it but nothing.
What have i to do?
thx
please read the complete thread and you will have the answer to ERROR 270....
hello
i have bougth a htc s710 which i wont to have a new windows on... wat most i do?. it is a risk?
It's no risk, do USPL as described in the sticky (or the Wiki) and then flash any ROM you want (for the S710 of course)
thank you very much
this was a good solution to this damn error
thank you very moch
Dr. Ahmed Zaher
Hi Mathitalia,
It is over 1 year from the issues we had.
Can you please tell me if your phone is working with Italian SIM cards?
Did you manage to SIM unlock it?
All the best,
Antanico
Hi,
Noob here.
I have just discovered this site and have spent the last couple of hours wiki-ing my way through the flashing process. However I have several questions that I couldn't find answers for.
1) I wish to upgrade my WM5 G4 prophet to WM6.5_23635 by Babak00000.
Can I upgrade from WM5 to 6.5 or do I need to go to 6.1 and then up to 6.5?
2) Do I need to CID unlock if my phone isn't locked to a carrier?
If someone could outline the programs (in order) and maybe the process to go from WM5 to 6.5 that would be great.
Thanks in advance.
Hello There!
I'm also quite new to this, but i have managed to install wm6.5 so i think i can help you!
1. No! I am pretty shure you can upgrade from the original rom to any other ROM you want without any steps in between!
2. I have not done any CID unlock and everythin worked fine!
... The Process is actually very easy! I took a ROM from bikertibi but I also downloaded one of babak00000 and it has the same filestructure... just execute the "prophet_upgrade.exe", then select G3 or G4 (DONT mess this up) and if you have Vista or W7 just check the Vista Checkbox, and please check the HardSPL!
Now press start and you don't have to do anymore than clicking "next" all the time
It's that easy
... I hope I didn't tell any bull****, but this is how it worked for me!! Good Luck!!!
Yeah, that's exactly how it worked on my S200, too
Problem with WM6.5_23113_WWE_Premium_Prophet_Babak
Hello everybody,
I just download this file, yesterdayWM6.5_23113_WWE_Premium_Prophet_Babak, to my PC and began upgrading work to my Qtek S200. I try several time, not sucessfully. Finally, the screen appear in 3 colors with text " IPL 2.20.0001"and "SPL 2.20.0001". I tried hard-reset and it said sucessful format, but it does not work. I copy my friend downgrade file but it said no connection with PC.
Does anyone have the same problem and could anyone kindly help me for this?
Thank you in advance
you need to hard spl 1st.if your pc is vista or win 7,upgrade your driver before flashing.read from here
http://forum.xda-developers.com/showthread.php?t=485293
hi
i had the same problem do this step by step
charge your battery through external charger to full (ur phone is in usb mode so itwont be charged)
DONT MESS THIS PART
download aku 2.2 g3 if your device is g3(aku 2.24 if it is g4)
uncheck the usb connection in active sync
then run the aku in your pc
it should work
if you want to flash any rom check the usb connection in active sync and flash it (read the steps on flashing screen)
hope it should work
Hello!
I had Genisys MM on my G4 and today i was downloaded adnroid N to instal on my rooted G4. In one of tutorials i saw that i must instal latest TWRP on my phone so I have done it like that. Now, when I want to enter into twrp after choosing twice "yes" my phone just restarts and starts to boot the system wich I messed up btw with textoder_dpi app, i changed dpi on 520 and now i cant use my phone at all. if someone know how to solve this i would be so much gratefull. Thanks!