Related
I have several SP5 phones, and i've used them without much trouble for the last coupe of years. We used a Linksys router to connect via wifi and it worked well, but know we bought a Cisco 851w router and the SP5 don't connect to it. They receive the SSID, but if we try to connect to the router, it just doesn't happen.
The SP5 are flashed with the last official i-mate WM5 ROM.
Does anyone has any idea what the problem maybe? I've read that the CCX Cisco extension has caused some problems with others HTC devices, but i don't knonw if this router uses CCX and if it does how to disable it.
Any help is welcomed.
i've the same issue with conceptronic router... i've tried with wep, open, b/g, 54/11, ALLLL!!!! arg :S
why... whyyyy.... whyyyyyyyyyyyyyyyyyyyyyyyyy!!!!
only can connect with adhoc with PC.
Try set PowerMode. Find key:
HKEY_LOCAL_MACHINE\Comm\tiacxwln1\Parms\HTCPowerMode
Set the value to 0 (default should be 4)
That registry value is already set in 4, thanks anyway. I am pretty sure the problem is with the router, the infamous CCX, but i have no clue how to solve this, and in cisco forums i haven't found any answers.
Sorry, I meant to set to 0. (Have updated my first post)
Try it. This trick works for me on my gigafast router.
aaecheve said:
That registry value is already set in 4, thanks anyway. I am pretty sure the problem is with the router, the infamous CCX, but i have no clue how to solve this, and in cisco forums i haven't found any answers.
Click to expand...
Click to collapse
I tried with 0, but also no luck.
Not sure if this will help, but how I got my tornado working with my dlink router was to go into the wireless setup of the router and change the WPA mode to 'WPA Only' and to change the cipher type to 'TKIP'.
For some reason if the WPA mode is set to auto (WPA or WPA2), the tornado will never connect.
Wooow thank you very very very much... I searched since a lot of month (connexion problems with a Zyxel)... and now, all is OK... (with param at 0 in registry)
Thx
My TouchPro can connect normally to unsecured wifi networks, but with WPA encrypted ones, it can only connect for the first time, after that it can not.
At home I have a wireless router/ADSL modem (Zoom X6) that is connected to my PC by cable, all my phones and laptops connect to internet via wifi. While other phones (1G iPhone) and laptops always connect successfully, the TP only connected once and then cannot or unable connect to the WPA security-enabled wireless network (although it's able to scan and detect the availability of the Wifi network). I tried to reset the router settings, even update router firmware, but no luck, it's still unable connect. I also tried with my office secured wifi network and I had the same problem.
Yesterday, I had to hardreset my TP and tried to connect once again, but problem was repeated, connected only once and after that, unable. Note that my previous PPC (TMobile Ameo WM5) didn't have any problem with the same wifi router and the same wifi settings (as follow).
My TP wifi settings:
Network Name: MyNetwork
Connects To: The Internet
Uncheck "This is a hidden network"
Next step:
Authentification: WPA-PSK
Data Encryption: TKIP
Greyed Out: The key is automatically provided
Network Key:************** (my pass)
Greyed Out: Key Index: 1
Next,
Checked "Use IEEE 802.1x network access control" but greyed (I can't change this)
Anybody know the solution for this issue?
Thanks and very appreciated for any help.
i experienced similar problems with my old p4350 but not yet with the TP...
no solution, sorry. but im quite unhappy that this issue still exists...
Any suggestion, pls.
yeah.. quite sucky.. I though the WiFi 'broke'.. but i was able to connect to a WEP site.. I think its something to do with WPA.
I never had this problem with my Diamond. The firmware on Diamond isso much more stable compared to Touch Pro..
I set everything to WEP and my key is open instead of shared, and now it works fine.
I had issues at my dad's, who has no encryption, and also there, when I set the key to open io shared, I got connection. (even though there is no key
anyway, it looks like that is the bug (at least in my device)
I have exactly same settings and same problem... but I want to use this encrypted connection since in future I will have to connect also in other places where I need it for sure.
Any help here?
I have similar promblem with my Hermes before.
My wireless router is running "Turbo-G" mode, my Hermes can't connect it with Turbo-G mode On.
After I change the wirless mode from Turbo-G to "g/b", my Hermes can connect it without any problem.
I tryed that and does not work...
strange is that is was working in the past and on router I did no changes but on TP I installed just some apps which should not affect this...
Only what could affect is Advanced config which I installed...
So where else can be problem?
How can I troubleshoot this?
Signal kvality is good but still keeps dropping and does not obtain IP from router.
mine works fine...not that that helps you in any way
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
hung_ng said:
I found the solution: set router to unsecured and use MAC filter. But that is only a tip, because my TP still can not connect with any other secured wifi.
Click to expand...
Click to collapse
You are merely restricting people from connecting to your router.. without encryption, you are sending unsecure packets all over..
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
I tried the PT using unsecured routers, WEP and WPA and all of them worked fine with stable connectivity.
The routers I have tried (without any problems) so far are:
1. Linksys WRT-54G running Tomato firmware
2. Linksys WRT-54G running DD-WRT firmware
3. D-Link DIR-655 running latest firmware
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues...
I am not using a custom ROM.
I hope this helps in some miniscule way.
Good luck.
Minus-1 said:
Have you tried using AES encryption on your device instead of TKIP? I only mention this because TKIP is the only one I haven't tried. All other methods of connectivity work fine for me with the TP.
....
I tired open, WEP and WPA1+2 on all of the above routers and the TP responded with zero issues....
Click to expand...
Click to collapse
I was about to say the same thing...
Not having any issues with my girlfriends WPA secured router. It's on WPA2-PSK and AES encryption. Enter key first time (case sensitive!!), and of you go... Connecting without trouble ever since
hmm..Funny mine still can't connect to my home WPA2, AES or TKIP.. I'm on the Buffalo Tomato firmware..
WIFI not connecting
This solution worked for me!! Excellent. This was a right pain!
thedino said:
I had same problem and looks like I found the bug in Advanced Config 3.2
There is in Network -> WPA auth... was enabled and I put Disabled (now I can use WPA auth anyway... before it just could not connect)
And next Wi-Fi delay after boot: 0 (when I changed to other number than I got problem that I could not even see any AP as I could see before and only network card settings was shown)
Try to play with other settings and you will see... I had also errors with device.exe after reboot... but now it all works as it should.
Just post here if it helps you also so we can notify creator of Advanced Config...
Click to expand...
Click to collapse
I've got the sollution, everybody on this forum probably has advance config installed, the program sets some default value's of it's own, set the WPA authentication under network in the advance config program to disabled and it will work again. Anyways, that worked for me
I've removed WiFi settings and then I edited settings again. It works now
Raphael Wifi problems
I bought this Fuze to replace my trusty Dash since I broke the antenna on my Dash. I'm running NRG Magic, but have tried other NATF and other ROMs as well, I cannot get this phone to connect to my wifi network I'm using WPA2-PSK but have disabled security for testing. My Dash and my laptop connect immediately with no problems. If I cannot get wifi going on this Fuze I'm afraid I'll have to put it on Ebay and try the Iphone, which people seem to love.
The Fuze did connect once, and it was WPA2-PSK at the time, I don't remember what ROM I was using at the time probably an NRG flavor, but Ihave had _no_ luck since.
Should I flash to 'official' ROM? Honestly I'm getting tired of playing with this thing I don't have the time.
Any help would be appreciated.
Thanks,
Marc
I may have found something
Check your time zone/daylight savings settings on your router. Phone and router time must be in sync.
Dear, All
I Flashed all roms in the forum, to have internet working i have to use static ip settings, only one rom works fine with Dynamic which is :
Cognition HD :
http://forum.xda-developers.com/showthread.php?t=1028115
But it's not Gingerbrea............ i don't wanna use it......
My Access Point in the home is : US Robotics
Could any body tell me what to do.
HELP
It is probably in your router configuration.
Sounds like you have dhcp turned off on your router.
Try also resetting the router to stock default settings and go from there.
Sent from my HTC Inspire™ 4G using XDA App
I did every thing
I did every thing you can imagine regarding the access point
rest to factory
change radio channel
with / without security
the DHCP working fine
seems that Dynamic setting could not get the Default gateway & DNS , WiFi can get it only with custom rom based on stock rom......
Is it WiFi driver problem , if it is.. how can i fix it?
I am useing now Honeysense 5.0 rom
Help
Any Body??
Possibly an IP conflict too... most likely its the router.. use channel 11 and set security to WEP..
Does ur router let u designate an IP based on connected MAC addresses?
Sent from my Desire HD using XDA Premium App
born_fisherman said:
... set security to WEP..
Click to expand...
Click to collapse
Why would you ever tell anybody to do that?! Either use WPA2 w/ AES encryption (AES only, don't use TKIP) or just don't use security.
On another note, have you tried connecting to any other wifi networks with these other ROMs (i.e. public hotspots or at a friend's house)? Sometimes routers just are overly picky about how IP requests are handled and some devices don't play nicely. We have a client who's Macbook _WILL NOT_ get and IP from their Linksys regardless of the fact that every other device we've ever tried (everything from multiple Windows laptops to a Linux laptop to iPhones, iPods and android phones) works fine with it.
|OP|, try connecting to another Wireless Access Point and get back with us, please.
Try the APN trick listed in the forum. Your router might be set to IPV6 and you need it set to IPV4
ST3ALTHPSYCH0 said:
Why would you ever tell anybody to do that?! Either use WPA2 w/ AES encryption (AES only, don't use TKIP) or just don't use security.
On another note, have you tried connecting to any other wifi networks with these other ROMs (i.e. public hotspots or at a friend's house)? Sometimes routers just are overly picky about how IP requests are handled and some devices don't play nicely. We have a client who's Macbook _WILL NOT_ get and IP from their Linksys regardless of the fact that every other device we've ever tried (everything from multiple Windows laptops to a Linux laptop to iPhones, iPods and android phones) works fine with it.
|OP|, try connecting to another Wireless Access Point and get back with us, please.
Click to expand...
Click to collapse
It's _ Working Perfect_ with Motorola Router/Wireless.
I have speed touch router(internet & DHCP) & US Robotics AP
you need any info just ask ... i am very curious to know the reason of this strange problem......
ST3ALTHPSYCH0 said:
Why would you ever tell anybody to do that?! Either use WPA2 w/ AES encryption (AES only, don't use TKIP) or just don't use security.
.
Click to expand...
Click to collapse
Why? Because I had a problem with obtaining an IP on this phone UNTIL I changed WEP. I understand its the lowest security level, but I am not overly concerned with my WiFi getting hacked since 1. My ssid isn't broadcast and 2. If it was you would have to be within 10 ft of my house to even get a signal.
Since changing to WEP on this phone I haven't had a single problem with obtaining an IP
Sent from my Desire HD using XDA Premium App
I bought huawei router , working like charm,,
Speedtouch is the worst router in the universe .....
Speedtouch : Thomson GO TO HELL for ever ..........
GO TO HELL
What a waste of money......
ibm2t6m said:
I bought huawei router , working like charm,,
Speedtouch is the worst router in the universe .....
Speedtouch : Thomson GO TO HELL for ever ..........
GO TO HELL
What a waste of money......
Click to expand...
Click to collapse
So buying a new router worked?
Here is the problem: i can connect my sensation to the wifi network and the system shows that the connection is successful. But i can't access to any internet services, such as web pages. One thing is for sure: the wife network is OK and i used to surf online with anther phone by the same wifi network. I would appreciate it if anyone respond to this thread.
this has just happened to me.
pmbldc said:
Here is the problem: i can connect my sensation to the wifi network and the system shows that the connection is successful. But i can't access to any internet services, such as web pages. One thing is for sure: the wife network is OK and i used to surf online with anther phone by the same wifi network. I would appreciate it if anyone respond to this thread.
Click to expand...
Click to collapse
Did you add the mac-address of your Sensation to the MAC -table of the router as "allowed'?
mayen said:
Did you add the mac-address of your Sensation to the MAC -table of the router as "allowed'?
Click to expand...
Click to collapse
No，because the routers is beyond my control. I'm sure that wifi is ok and i can access the webpage by another device without doing anything. Certainly i need to input the password.
And thank you for your reply.
pmbldc said:
Here is the problem: i can connect my sensation to the wifi network and the system shows that the connection is successful. But i can't access to any internet services, such as web pages. One thing is for sure: the wife network is OK and i used to surf online with anther phone by the same wifi network. I would appreciate it if anyone respond to this thread.
Click to expand...
Click to collapse
its a router issue....plz disable DHCP on router ... then use NAT and put a seprate static ip for sensation... this happens if u use automatic ip config by ur ISP....nothing wrong with the fone...my frnd had same issue and i configured his router from here via team viewer and now it rocks.... get router configured...
lalitsehgal21 said:
its a router issue....plz disable DHCP on router ... then use NAT and put a seprate static ip for sensation... this happens if u use automatic ip config by ur ISP....nothing wrong with the fone...my frnd had same issue and i configured his router from here via team viewer and now it rocks.... get router configured...
Click to expand...
Click to collapse
I'm amazed at your knowledge of wireless technologies but please explain me why is it a router issue if 2 of my laptops, 2 towers and 2 of my phones (along with multiple guests' phones) have no problem accessing content on my wireless network but my Sensation throws a fit every time it's I try to connect?
Thank you in advance.
borodin1 said:
I'm amazed at your knowledge of wireless technologies but please explain me why is it a router issue if 2 of my laptops, 2 towers and 2 of my phones (along with multiple guests' phones) have no problem accessing content on my wireless network but my Sensation throws a fit every time it's I try to connect?
Thank you in advance.
Click to expand...
Click to collapse
well all the routers have config options..... they transmit wireless in a particular ip range depending upon the configuration... ur devices have enrolled themselves on all possible empty slots in ip range and sensation is not able to coz it must b out of the ip range now...possibly u must have used many wireless devices but even after u disable them the temp ip auto assigned stays... so except for new devices old ones will never have problem.... jst disable dhcp in config page of router and enable nat.....if it does nt work add me on gtalk [email protected] and i'll configure ur router via team viewer....
Hi,
I have a problem with the wifi on my Samsung Galaxy S2 after I changed some settings on my home router. The wifi works anywhere else, just not at home.
What I changed was the router ip and wireless channel. Since then I have cleared all the wireless and browser settings in the phone and reverted back to the old settings on the router. Still doesn't work.
I've also tried having static IP. It doesn't work as well. It's only the internet. It connects to the router fine and I haven't had any problems with other gadgets and computers connecting.
Your tried turning on airplane mode for a few then reboot?
Your router doesn't have a sync button does it?
*signed
One thing you can do is delete the connection to your router on your phone, and connect again with new password from router. Do you have any other device beside your phone connecting to this router? If no, you need to test it. If yes and not connecting check the connection security, like wpa or wpa2. If all fail, reset router. This mean you will need to reconfigure your router. Check manual for more on your router.
Sent from my SGH-T989 using xda premium
Yes. View available wireless connections. Click your router. Then click "forget".
Then view again, click your router, and type the passphrase.
mrrick said:
Your tried turning on airplane mode for a few then reboot?
Your router doesn't have a sync button does it?
*signed
Click to expand...
Click to collapse
Just tried this and it didn't work.
My router is a cheap basic router that came from my internet provider. No such thing on it.
85gallon said:
Yes. View available wireless connections. Click your router. Then click "forget".
Then view again, click your router, and type the passphrase.
Click to expand...
Click to collapse
I've already reset anything wifi related on my phone. It hasn't worked.
Do you have something else that you can connect to wifi to see if the problem is your router?
85gallon said:
Do you have something else that you can connect to wifi to see if the problem is your router?
Click to expand...
Click to collapse
Not in my home no. But like I said in the OP, the wifi on my phone works fine in other houses and hotspots. It's most definitely some kind of communication problem between my router and phone only but I'm not familiar enough with routers to know the problem and I haven't stumbled on anyone else on google having the same problem.
Two laptops, one Win7 and one OsX, are connected. Unfortunately I'm new in the area I live in and my girlfriend doesn't have a smartphone so I haven't been able to test if it's just my phone or just android or iPhones in general.
I can't think of a logical reason why it's like this
Maybe router is configured with wifi 802.11n and the galaxy only runs on b/g ?
If you're using WPA/WPA2 security, check that the
router is set to use AES encryption.
If you think you did your best. Its better to buy a new router then. )
maybe you could try unplugging your router?
Freestate said:
Maybe router is configured with wifi 802.11n and the galaxy only runs on b/g ?
Click to expand...
Click to collapse
I didn't change any of that. It's got a WEP encryption only as well.