Here is the problem: i can connect my sensation to the wifi network and the system shows that the connection is successful. But i can't access to any internet services, such as web pages. One thing is for sure: the wife network is OK and i used to surf online with anther phone by the same wifi network. I would appreciate it if anyone respond to this thread.
this has just happened to me.
pmbldc said:
Here is the problem: i can connect my sensation to the wifi network and the system shows that the connection is successful. But i can't access to any internet services, such as web pages. One thing is for sure: the wife network is OK and i used to surf online with anther phone by the same wifi network. I would appreciate it if anyone respond to this thread.
Click to expand...
Click to collapse
Did you add the mac-address of your Sensation to the MAC -table of the router as "allowed'?
mayen said:
Did you add the mac-address of your Sensation to the MAC -table of the router as "allowed'?
Click to expand...
Click to collapse
No,because the routers is beyond my control. I'm sure that wifi is ok and i can access the webpage by another device without doing anything. Certainly i need to input the password.
And thank you for your reply.
pmbldc said:
Here is the problem: i can connect my sensation to the wifi network and the system shows that the connection is successful. But i can't access to any internet services, such as web pages. One thing is for sure: the wife network is OK and i used to surf online with anther phone by the same wifi network. I would appreciate it if anyone respond to this thread.
Click to expand...
Click to collapse
its a router issue....plz disable DHCP on router ... then use NAT and put a seprate static ip for sensation... this happens if u use automatic ip config by ur ISP....nothing wrong with the fone...my frnd had same issue and i configured his router from here via team viewer and now it rocks.... get router configured...
lalitsehgal21 said:
its a router issue....plz disable DHCP on router ... then use NAT and put a seprate static ip for sensation... this happens if u use automatic ip config by ur ISP....nothing wrong with the fone...my frnd had same issue and i configured his router from here via team viewer and now it rocks.... get router configured...
Click to expand...
Click to collapse
I'm amazed at your knowledge of wireless technologies but please explain me why is it a router issue if 2 of my laptops, 2 towers and 2 of my phones (along with multiple guests' phones) have no problem accessing content on my wireless network but my Sensation throws a fit every time it's I try to connect?
Thank you in advance.
borodin1 said:
I'm amazed at your knowledge of wireless technologies but please explain me why is it a router issue if 2 of my laptops, 2 towers and 2 of my phones (along with multiple guests' phones) have no problem accessing content on my wireless network but my Sensation throws a fit every time it's I try to connect?
Thank you in advance.
Click to expand...
Click to collapse
well all the routers have config options..... they transmit wireless in a particular ip range depending upon the configuration... ur devices have enrolled themselves on all possible empty slots in ip range and sensation is not able to coz it must b out of the ip range now...possibly u must have used many wireless devices but even after u disable them the temp ip auto assigned stays... so except for new devices old ones will never have problem.... jst disable dhcp in config page of router and enable nat.....if it does nt work add me on gtalk [email protected] and i'll configure ur router via team viewer....
Related
hi greetings to all. I am new in this foum. I have bought a new smartphone and it brought me to this forum for support.
I have htc s710 with wm 6. Is is possible to access internet on the phone by connecting it to the laptop through wi-fi in adhoc mode? I tried connecting it, and connection was established, I was as well able to ping the phone from my laptop but i was unable to use internet. I want to use laptop as a wireless router.
in the laptop i have ethernet connection which brings internet to my home, and i have enabled ics in that. the wi-fi card has been assignd ip address 192.168.0.1, and mobile has ip assigned 192.168.0.2.
is it possible in this way?
If your notebook has a bluetooth module built in, establish a BT ActiveSync connection and your S710 will then use the computer's internet access automatically.
i dont hava BT in my laptop. I just have a external orinoco gold wi-fi card.
is it possible through that.
I've never tested it cause I use a WAP router. ICS worked crappy when I tried it.
Did you try using DHCP instead of setting a fixed IP on your S710? ICS offers DHCP services and IIRC depends on it. Also remember that you normally can't set a DNS server on WinMo. Does ICS offer its services on all network cards or don't you have to activate the card you want ICS to serve on in its settings?
Thanks for the response. I have not tried DHCP, let me see today if it works that way.
Hi, I searched this concern before cause I wanted to use wifi too in the office. I'm not sure where the thread that I read had been sucessfull but it did gave me the idea to set mine and get it working.
Basically I have LAN connection in the office, connected to my Dell Latitdue d600 and created ad hoc connection to my HTC Touch.
I opened network connections, and right click my lan connection, advance tab, and enable internet sharing using wireless connection, thats the only thing i did, after establishing the adhoc connection, IP address in Pc is the same, 192.168.0.1 and subnet mask is 255.255.255.0 hope you get it working. I dont have a smartphone to test it myself
Hi piper. my problem is fixed now. i connected the phone to the laptop at adhoc mode, applied static ip. then ran network setup wizard. after the setup was complete i changed the ip setings of the phone. i set the phone to acquire ip form dhcp server.
neesad said:
Hi piper. my problem is fixed now. i connected the phone to the laptop at adhoc mode, applied static ip. then ran network setup wizard. after the setup was complete i changed the ip setings of the phone. i set the phone to acquire ip form dhcp server.
Click to expand...
Click to collapse
Oh nice to hear, I'll keep that in mind when my friend ask me how to do it with his Smartphone
neesad said:
i set the phone to acquire ip form dhcp server.
Click to expand...
Click to collapse
Can you explain how?Does it works on vista?Tanks for replying
ueghio said:
Can you explain how?Does it works on vista?Tanks for replying
Click to expand...
Click to collapse
Well I have tried that on my windows xp machine. However, when you enable ICS then I think it will provide ip to connected devices via DHCP. I just enabled phone to acquire ip via DCHP by going to the phones, Connection manager -- > Settings --> WLAN Settings --> Connection status ---> Menu --> IP Address --> And select Use server - assigned IP address.
Step, first enable ICS in your laptop -- > apply ip address to your phone like 192.168.0.2 255.255.255.0 and then connect your phone to your laptop in adhoc mode. Once the connection is established go to phone and change the ip address settings as given above ie. select server assigned ip address. i USED THIS MODE AS THERE WAS NO OPTION TO APPLY DNS IN THE PHONE.
how to connect ma phone to a wireless laptop
i have an htc HD2 running android ice cream os but de wireless is weak.how do i connect de phone to a wireless lenova laptop runnin windows 7.thank
habboc said:
i have an htc HD2 running android ice cream os but de wireless is weak.how do i connect de phone to a wireless lenova laptop runnin windows 7.thank
Click to expand...
Click to collapse
You would get a better answer asking this in the HD2 forums, mate
habboc said:
i have an htc HD2 running android ice cream os but de wireless is weak.how do i connect de phone to a wireless lenova laptop runnin windows 7.thank
Click to expand...
Click to collapse
you can use Wondershare MobileGo for Android
I'm having a technical problem with my home Wi-Fi router, and my Fuze. I just recently set up a wireless network at home, and have my PC connected to the router through Wi-Fi. Whenever I attempt to connect my Fuze to the router, the Fuze hijacks the connection, and disconnects my PC from the network. I have tried to contact the tech support for the router, but nothing they suggest seems to work. Has anyone else experienced this? Is there something I am missing in the router configuration? Any help would be greatly appreciated.
htcfan78 said:
I'm having a technical problem with my home Wi-Fi router, and my Fuze. I just recently set up a wireless network at home, and have my PC connected to the router through Wi-Fi. Whenever I attempt to connect my Fuze to the router, the Fuze hijacks the connection, and disconnects my PC from the network. I have tried to contact the tech support for the router, but nothing they suggest seems to work. Has anyone else experienced this? Is there something I am missing in the router configuration? Any help would be greatly appreciated.
Click to expand...
Click to collapse
i've used my fuze on multiple routers and it doesnt do this. Get a new router
If you give static ip on both pc and ppc check if you gave the same ip. If not, check the dhcp range on your router.
nhshah7 said:
i've used my fuze on multiple routers and it doesnt do this. Get a new router
Click to expand...
Click to collapse
Maybe I should not have said "any help would be greatly appreciated". It is a new router.
htcfan78 said:
Maybe I should not have said "any help would be greatly appreciated". It is a new router.
Click to expand...
Click to collapse
And who makes this new router?
NotATreoFan said:
And who makes this new router?
Click to expand...
Click to collapse
It is a Linksys RangePlus WRT110 router.
htcfan78 said:
It is a Linksys RangePlus WRT110 router.
Click to expand...
Click to collapse
First thing I would try is updating the firmware, and doing a factory restore.
If that doesn't work, try changing the router to force 54g connections only. It's possible, but unlikely, that the Draft-N spec used by the router doesn't play nicely with the WLAN chipset in the Touch Pro.
jigero said:
If you give static ip on both pc and ppc check if you gave the same ip. If not, check the dhcp range on your router.
Click to expand...
Click to collapse
agreed, i would try this first. makes sense that if they both have the same ip that that is the cause of your problem. if you're set to assign dynamic ip's on connecting to the router, then i'd try upgrading the firmware. good thing to check first
Still having problems with this issue. Tried everything suggested so far.
Make sure the IP's are not conflicting and the dhcp range is at least 10 addresses.
It could also be a neighbor screwing around, make sure you encrypt your wifi with wpa or wpa2 or anyone in range can use your wifi.
When I first read your problem I thought it was an IP conflict with both devices like some others have said....but if you've checked everything and tried all possible solutions posted in this thread I think it might be pretty safe to assume that you need a new router. If its new, just bring it back and exchange it for a different one.
I'm using a D-Link DIR-655P and have connection types (B, G, N) on auto, dynamic IP address assignment set, and I have the latest firmware installed and I have no issues whatsoever...I have a quick lock and fast speeds.
I've got a few questions, because to me this sounds like a possible issue with your network adapter on your PC, rather than a DHCP "hijack" issue.
What is the ip on your PC after it gets "hijacked"?
Do you use sleep/hibernate modes on your PC?
Have you turned off Windows Firewall or any other security/virus/malware software on the PC?
This router is new, did this setup work with a previous router?
What security protocol are you using for wireless connections, WEP, WPA, WPA2, or none?
-----------------
Hope you can figure it out, that's gotta be a real PITA.
Got it fixed. Did some more research, and found that the firmware updates do not work with Firefox, so I used IE to do the update, and it works fine. For anyone else that uses or is planning to use this router, check the firmware. The firmware version that mine came with (1.0.4 build 10) does not work with multiple versions of Windows (ie: cannot have a computer with Win XP and another with Win Vista connected at the same time). Thanks for the help.
Ahhh...well there you go. Glad its fixed.
Dear, All
I Flashed all roms in the forum, to have internet working i have to use static ip settings, only one rom works fine with Dynamic which is :
Cognition HD :
http://forum.xda-developers.com/showthread.php?t=1028115
But it's not Gingerbrea............ i don't wanna use it......
My Access Point in the home is : US Robotics
Could any body tell me what to do.
HELP
It is probably in your router configuration.
Sounds like you have dhcp turned off on your router.
Try also resetting the router to stock default settings and go from there.
Sent from my HTC Inspire™ 4G using XDA App
I did every thing
I did every thing you can imagine regarding the access point
rest to factory
change radio channel
with / without security
the DHCP working fine
seems that Dynamic setting could not get the Default gateway & DNS , WiFi can get it only with custom rom based on stock rom......
Is it WiFi driver problem , if it is.. how can i fix it?
I am useing now Honeysense 5.0 rom
Help
Any Body??
Possibly an IP conflict too... most likely its the router.. use channel 11 and set security to WEP..
Does ur router let u designate an IP based on connected MAC addresses?
Sent from my Desire HD using XDA Premium App
born_fisherman said:
... set security to WEP..
Click to expand...
Click to collapse
Why would you ever tell anybody to do that?! Either use WPA2 w/ AES encryption (AES only, don't use TKIP) or just don't use security.
On another note, have you tried connecting to any other wifi networks with these other ROMs (i.e. public hotspots or at a friend's house)? Sometimes routers just are overly picky about how IP requests are handled and some devices don't play nicely. We have a client who's Macbook _WILL NOT_ get and IP from their Linksys regardless of the fact that every other device we've ever tried (everything from multiple Windows laptops to a Linux laptop to iPhones, iPods and android phones) works fine with it.
|OP|, try connecting to another Wireless Access Point and get back with us, please.
Try the APN trick listed in the forum. Your router might be set to IPV6 and you need it set to IPV4
ST3ALTHPSYCH0 said:
Why would you ever tell anybody to do that?! Either use WPA2 w/ AES encryption (AES only, don't use TKIP) or just don't use security.
On another note, have you tried connecting to any other wifi networks with these other ROMs (i.e. public hotspots or at a friend's house)? Sometimes routers just are overly picky about how IP requests are handled and some devices don't play nicely. We have a client who's Macbook _WILL NOT_ get and IP from their Linksys regardless of the fact that every other device we've ever tried (everything from multiple Windows laptops to a Linux laptop to iPhones, iPods and android phones) works fine with it.
|OP|, try connecting to another Wireless Access Point and get back with us, please.
Click to expand...
Click to collapse
It's _ Working Perfect_ with Motorola Router/Wireless.
I have speed touch router(internet & DHCP) & US Robotics AP
you need any info just ask ... i am very curious to know the reason of this strange problem......
ST3ALTHPSYCH0 said:
Why would you ever tell anybody to do that?! Either use WPA2 w/ AES encryption (AES only, don't use TKIP) or just don't use security.
.
Click to expand...
Click to collapse
Why? Because I had a problem with obtaining an IP on this phone UNTIL I changed WEP. I understand its the lowest security level, but I am not overly concerned with my WiFi getting hacked since 1. My ssid isn't broadcast and 2. If it was you would have to be within 10 ft of my house to even get a signal.
Since changing to WEP on this phone I haven't had a single problem with obtaining an IP
Sent from my Desire HD using XDA Premium App
I bought huawei router , working like charm,,
Speedtouch is the worst router in the universe .....
Speedtouch : Thomson GO TO HELL for ever ..........
GO TO HELL
What a waste of money......
ibm2t6m said:
I bought huawei router , working like charm,,
Speedtouch is the worst router in the universe .....
Speedtouch : Thomson GO TO HELL for ever ..........
GO TO HELL
What a waste of money......
Click to expand...
Click to collapse
So buying a new router worked?
Hi
I have already asked this before but may have asked it in a mad way, maybe in wrong place who knows this site is freaking massive
I have a HTC Sensation on 3 mobile One Plan and use this phone to give me and my partner internet using the WIFI Hotspot
As I am coming from broadband from good ole Richard I have 4 WIFI routers in several room in my house all have connection to my main PC which is my media server
Only problem is when we are on the internet we dont have access to this server we have to disconnect and connect to one of the WIFI routers
So what I would like to do is connect the phone to a PC using USB and use the PC as a proxy server, this would then be connected to one of the WIFI routers, this would then have all my WIFI routers giving out the internet
Is this possible??
Any info would be awesome
Thanks
Bump!! Bump!! Bump!!
well to make this work you would need use the wifi hotspot to connect to your server, from there bridge your wifi connection of the server to the hardwire connection of your pc. itll take some reconfiguring of your ip scheme to make it all work but if you know what your doing its not too bad. Also turn on all upnp. (universal plug and play) it will allow you to see all devices on the network without having to have the ip addresses.
wranglerray said:
well to make this work you would need use the wifi hotspot to connect to your server, from there bridge your wifi connection of the server to the hardwire connection of your pc. itll take some reconfiguring of your ip scheme to make it all work but if you know what your doing its not too bad. Also turn on all upnp. (universal plug and play) it will allow you to see all devices on the network without having to have the ip addresses.
Click to expand...
Click to collapse
Thats the only way. But upnp MUST be enabled.
Good luck!
Sent from my GT-P1000 using XDA Premium App
This is a strange one, because it used to do it and nothing has changed.
The WiFi can obtain an IP from the router, it can connect to my PC via the router.... but it just cant connect to the internet via the router?
If I disconnect the WiFi and just use data, everything that has been waiting comes flying through!
Any ideas what is going wrong, the phone says it's connected, but I could swear my WiFi symbol used to go green, but it is just staying white.
Running 21E OS.
TIA.
Couldn't really understand (no offence) but if this happens to me I usually just restart my router and it would work again.
Sent from my LG-P920 using xda premium
kriptikchicken said:
This is a strange one, because it used to do it and nothing has changed.
The WiFi can obtain an IP from the router, it can connect to my PC via the router.... but it just cant connect to the internet via the router?
If I disconnect the WiFi and just use data, everything that has been waiting comes flying through!
Any ideas what is going wrong, the phone says it's connected, but I could swear my WiFi symbol used to go green, but it is just staying white.
Running 21E OS.
TIA.
Click to expand...
Click to collapse
Do perhaps have a Netgear router ?
If yes reboot the router
Change wifi Channel from Auto to 6 or 7
if not try the above also try setting up a static ip
Do you have Droidwall installed?
defcomg said:
Do perhaps have a Netgear router ?
If yes reboot the router
Change wifi Channel from Auto to 6 or 7
if not try the above also try setting up a static ip
Do you have Droidwall installed?
Click to expand...
Click to collapse
Yeah I do have a Netgear wireless, I left everything off all night but no joy... I will try your channel change thing and see if that works. It's strange because it used to work and i haven't changed anything that I am aware of and the PC has no problem. But obviously nothing is being sent to the Cisco CM. Hmmm....
Thanks for the input guys. :good:
Sorry OptimusTM, it probably was a bit garbled in my original post.... basically the PC gets to the internet (probably like most folks here) by contacting the wireless, then the wireless contacts the cable modem then it goes to the internet.
However my O3D can contact the wireless, but the wireless doesn't seem to contact the cable modem for some reason, however it will contact the PC.
The phone says it's connected to the wireless. It has been given it's IP address.
Check your DNS server address.
Put manually 8.8.8.8 and tell us if it works.
Sent from my LG-P920 using xda app-developers app
Thanks again for all your help guys...
I ended up fixing it buy changing the IP address that the wireless router was giving it (set it to static) and also the default gateway to the same as my PC's and it worked straight away.
Still no idea why it had such a dizzy turn in the first place though!?!? :silly:
same problem please can you explain steps
kriptikchicken said:
Thanks again for all your help guys...
I ended up fixing it buy changing the IP address that the wireless router was giving it (set it to static) and also the default gateway to the same as my PC's and it worked straight away.
Still no idea why it had such a dizzy turn in the first place though!?!? :silly:
Click to expand...
Click to collapse
I have the same problem too unexpectedly happened...please can you explain in steps how you managed to fix it. thank you