Rebuild font pack in G1? - G1 Android Development

Can anyone know how to rebuiid fonts in G1 so that we can read Unicode perfectly. In fact, I'm using Vietnamese and my language has some letters like à, á, â, ừ, ă, đ,... Now that when I browse web which use Vietnamese, I just only can see the rectangle characters instead of those above.
I found out that in the system directory there has font. And I don't know how to replace those fonts with the Unicode one.
Any ideas for this problem?

You can use my modified update :
http://www.4shared.com/file/78879606/a6450d7b/update.html
I modified it to support multi-language

Can this pack fully support Unicode? Do you base on JF1.3 firmware?

bountyhunter said:
Can this pack fully support Unicode? Do you base on JF1.3 firmware?
Click to expand...
Click to collapse
Yes, It fully support Unicode and you can upgrade it to see Vietnamese websites. I have upgraded on my G1 and it's okay.

i've done it for hebrew - you can do it too
it's quite simple, all you have to do is replace the fonts in the fonts directory (only droid sans and droid sans bold) with fonts that you know have your language, after you replace these fonts (and rename them of course) you have to re-sign the update.zip file and update with it as you would with jfv1.3
so to recap:
open the jfv zip
navigate to fonts directory
delete droid sans and droid sans bold
copy your own (and rename them accordingly)
re-pack the file
sign it with apk sign and the recovery image's key
update it
really simple
--
peace to israel\gaza

Thanks for your Firmware Funbacon and thanks for the guide to cook firmware with my language fonts by eladkatz

Hebrew Support
Elad,
Thanks so much for your post. I'm a bit at a loss, though---
Where did you get the fonts for hebrew? From the SDK? And if you get them, and have root, why can't you just replace the ones already on the phone?
Also, is there any guides that you know of that would help me compile and sign my own modified rc30?
Thanks
Shalom, here and there...
yochai

Ah I found this sticky on repacking boot images... so that's good. But I would really like to replace my fonts directory... although i have a feeling it needs to be compiled.
Also, do you still have your modified hebrew rc30? thanks

I repacked update.zip with my own fonts but when it goes to verify the package, I get an error,
EDIT: Never mind I had signed the update incorrectly. Thanks for the initial instructions though.

yochaigal said:
Ah I found this sticky on repacking boot images... so that's good. But I would really like to replace my fonts directory... although i have a feeling it needs to be compiled.
Also, do you still have your modified hebrew rc30? thanks
Click to expand...
Click to collapse
I thought I answered you on Android Community forums. The instructions and Hebrew RC30 update can be found on iandroid.co.il forums.

I looked through them, and was unsuccessful. The posted rc30 mod there is no longer available, for one thing. Also I really wanted to know if uploading JF's rc30 would reverse their changes.

yochaigal said:
I looked through them, and was unsuccessful. The posted rc30 mod there is no longer available, for one thing. Also I really wanted to know if uploading JF's rc30 would reverse their changes.
Click to expand...
Click to collapse
Here you go. Scroll down the thread and you will see a link to the attachment. http://iandroid.co.il/phpBB3/viewtopic.php?f=5&t=32

Do you mean the rapidshare post? because that is no longer avaiable.

yochaigal said:
Do you mean the rapidshare post? because that is no longer avaiable.
Click to expand...
Click to collapse
I just tried it. It's available. Please review the entire thread. It's there.

JF v1.4 MultiTouch with Unicode fonts.
Hi Thanks to Funbacon and JF for R30 v1.41, I just modified it to include the unicode fonts originaly was in v1.3 (Funbacon post). Please download it and rename to update.zip and following instruction from JF v1.41 update.
http://www.hoadam.net/jf141_unicode.zip
This version will let you use Multi Touch with unicode, not sure other languages but Vietnamese language looks fine. This also give you auto rotate for the browser as well.
Thanks all!

zip file is not valid...
can someone explain to me what the unicode fonts do for us? thanks...

repack Unicode font for jk 1.41
yochaigal said:
zip file is not valid...
can someone explain to me what the unicode fonts do for us? thanks...
Click to expand...
Click to collapse
It will let you read/view websites with foreign characters. If you don't need then just use the original jk v1.41.

Well I have been having issues with hebrew fonts... is it necessary to use a unicode rc30 mod in order to get the fonts to work correctly? perhaps that explains why my formatting is all weird with the new fonts... either way the above mentioned update does not work...

huyle39 said:
Hi Thanks to Funbacon and JF for R30 v1.41, I just modified it to include the unicode fonts originaly was in v1.3 (Funbacon post). Please download it and rename to update.zip and following instruction from JF v1.41 update.
http://www.hoadam.net/jf141_unicode.zip
Thanks all!
Click to expand...
Click to collapse
will this support the arabic language ?!

ahmad.yousry said:
will this support the arabic language ?!
Click to expand...
Click to collapse
I doubt it. I've read here that even if you install a font that supports arabic, letters are shown as not connected in a word. From what I understand, cupcake update 1.5 should support arabic, however this was not mentioned in the roadmap but was mentioned in articles discussing the leaked cupcake images.

Related

TF3D + System Fonts

Here's my current ( and favourite ) fonts. Will do more if have time. Meantime, go here for more fonts by GODZSON.
http://forum.xda-developers.com/showthread.php?t=471604&page=11
enjoy
Latest Update: New fonts: 22th OCT 09
ARGOS. Follow link.
http://forum.xda-developers.com/showthread.php?t=535869&page=7
Mmmm, that looks nice
'Scuse ignorance - are you using WM6.1 or .5 ?
Cheeeers
Chris
Nice to have you around in the Topaz forum kangmas
I also have a suggestion for your work: Bare in mind that many of the fonts are not suitable for representing international characters. I had some problems with Godzon's Hall Feica since it displayed the greek letter "Σ" somehow strange. That is why I asked you for Calibri font, which definitely supports greek.
Maybe you could denote which font supports international characters and which it doesn't
Thanx again for your will to share your fonts
chris5s said:
Mmmm, that looks nice
'Scuse ignorance - are you using WM6.1 or .5 ?
Cheeeers
Chris
Click to expand...
Click to collapse
Using tom_codon WM6.5, from this post.
http://forum.xda-developers.com/showpost.php?p=3969718&postcount=1
harisg said:
Nice to have you around in the Topaz forum kangmas
I also have a suggestion for your work: Bare in mind that many of the fonts are not suitable for representing international characters. I had some problems with Godzon's Hall Feica since it displayed the greek letter "Σ" somehow strange. That is why I asked you for Calibri font, which definitely supports greek.
Maybe you could denote which font supports international characters and which it doesn't
Thanx again for your will to share your fonts
Click to expand...
Click to collapse
Hehe, not sure which font support Int. Char. , as I am using WWE. Any fonts suggestion is welcome, will try to do it.
kangmas said:
Using tom_codon WM6.5, from this post.
http://forum.xda-developers.com/showpost.php?p=3969718&postcount=1
Hehe, not sure which font support Int. Char. , as I am using WWE. Any fonts suggestion is welcome, will try to do it.
Click to expand...
Click to collapse
Out of curiosity... how does Tom Codon's ROM have my icons on the start menu ? Did you install them... or did he ?
SF Ironsides
New font I made for TD2. ( font from DaFont ). Take note that this is not for those who like large font. See screenshot:
And not sure if it support Intl. Char.
Attachment below.
NRGZ28 said:
Out of curiosity... how does Tom Codon's ROM have my icons on the start menu ? Did you install them... or did he ?
Click to expand...
Click to collapse
To answer you bro, I have done few mod. Taskbar form m6silver from here:
http://forum.xda-developers.com/showpost.php?p=3854087&postcount=1
neon icons from nicelad_uk from here:
http://forum.xda-developers.com/showthread.php?t=524273
clock from whiskeybro which I mod here:
http://forum.xda-developers.com/showthread.php?t=420887&page=218
The rest is from tom's rom.
Cambria Italic
Improved version to the century schoolbook font. This Cambria Italic font will change all your TF3D and system fonts, including the setting tab.
See screenshot below:
Again, not sure if it support Intl. Char.
Cant upload here. Server giving problem. Upload to mediafire. link below
( link deleted. direct download below )
edit: O.K. have manage to attached the file here. Unzip, copy cab file to ppc and install.
KFC fonts
latest tf3d fonts by me. KFC fonts was download at 1001 free fonts and was created by J. F. Y. Daniel Gauthier. Adapted to suit the tf3d and system fonts of your topaz. Copy cab file to ppc and install. see screenshot below.
Can anyone make a guide step by step. Easier for understand.
Wat is ppc.?
TQ in advance..
byby79 said:
Wat is ppc.?
TQ in advance..
Click to expand...
Click to collapse
Pocket PC (er, personal computer?)
Doesn't work on my phone. Do I maybe need an english ROM or do I have to install the fonts?
How to
byby79 said:
Can anyone make a guide step by step. Easier for understand.
Wat is ppc.?
TQ in advance..
Click to expand...
Click to collapse
pacmansh said:
Doesn't work on my phone. Do I maybe need an english ROM or do I have to install the fonts?
Click to expand...
Click to collapse
Hey bro. there's no rocket science involved.
1] Just download the fonts that you want.
2] If it is in .cab file, DO NOT unzip. If it is in .zip file, unzip it to get the .cab inside.
3] Copy the .cab file to any folder of your Topaz storage card.
4] Use file explorer of your phone and go to the folder that your copy the fonts.
5] Tap on it to install.
6] Reboot your phone.
You will see the new fonts after that.
(Replying from my Topaz)
I feel like that's what I did.
1. Copyed the fonts from the Windows folder from my PC to the fonts fonts folder on my PPC
2. Installed the cab file
3. Tried to soft reset of course
Finally I got one change, but only in the taskmenu as seen on the screenshot. No change at all anywhere else.
ermmm, i have copied the file to my storage and i saw the set up files but once i click on it it bring me to Opera browser.. How come this happen.?
???
pacmansh said:
I feel like that's what I did.
1. Copyed the fonts from the Windows folder from my PC to the fonts fonts folder on my PPC
2. Installed the cab file
3. Tried to soft reset of course
Finally I got one change, but only in the taskmenu as seen on the screenshot. No change at all anywhere else.
Click to expand...
Click to collapse
Out of curiosity, why are you copying fonts from your pc window fonts folder to Topaz. I can see from your screenshot that is not the fonts that I create. If you want to use any fonts from your pc, upload it here and I will convert it to suit Topaz. You cannot just copy it directly.
byby79 said:
ermmm, i have copied the file to my storage and i saw the set up files but once i click on it it bring me to Opera browser.. How come this happen.?
Click to expand...
Click to collapse
Can tell me the fonts name, bro? Should not happen as I have personally install it before upload it here.
Hall Feica
As requested from another post. Hall Feica font. Tested on my Topaz. As usual, copy cab file to storage and install.
Hello Kangmas!
I've a question: Where can i get those icons (battery, sound, 3G, etc.) from your status bar, or it is a WM6.5 feature? Can i install it on WM6.1? Is there Any cab file?
Thanks
Ok, problem solved. I installed the cab Files on my storage card and not on the device. My bad!
Thx, for the offer anyway and thx for providing those nice fonts!
Hello Mr Kangmas
(sorry for my English)
i like your Cambria Italic too much but have some problem that
make my Thai Font change to ?????
please advise me what shall i do ?
(i would like to use your font very much but cannot display Thai)
Thank you.
nickfranky said:
Hello Kangmas!
I've a question: Where can i get those icons (battery, sound, 3G, etc.) from your status bar, or it is a WM6.5 feature? Can i install it on WM6.1? Is there Any cab file?
Thanks
Click to expand...
Click to collapse
All those icons are made by m6silver. Just follow the link below:
http://forum.xda-developers.com/showthread.php?t=520132
pacmansh said:
Ok, problem solved. I installed the cab Files on my storage card and not on the device. My bad!
Thx, for the offer anyway and thx for providing those nice fonts!
Click to expand...
Click to collapse
Hehe, o.k. bro.
belt001 said:
Hello Mr Kangmas
(sorry for my English)
i like your Cambria Italic too much but have some problem that
make my Thai Font change to ?????
please advise me what shall i do ?
(i would like to use your font very much but cannot display Thai)
Thank you.
Click to expand...
Click to collapse
Sorry, as I am using WWE Topaz, most of these fonts only support WWE. (World Wide English). It may not be suitable for other language. So for those wanting fonts for e.g. Greek, Chinese, Thai ... etc, please upload your fonts here (pm me if possible) and I will convert it for Topaz if time permit.

Android Localization?

Hello people,
I just saw on YouTube that some guy had localized their Android in Ukrainian. Is it possible to do this in other languages and what would I need for this?
Thanks a lot!
zkvvoob said:
Hello people,
I just saw on YouTube that some guy had localized their Android in Ukrainian. Is it possible to do this in other languages and what would I need for this?
Thanks a lot!
Click to expand...
Click to collapse
You could:
Download system sources (original AOSP or maybe sources of some ROM, if they are available), modify them and build. Very long way - I don't recommend it to you.
Talk to some ROM cooker - you will send him localized strings and he will integrate them into his ROM.
You could also use apktool to decode framework-res.apk file, add new locale, build it and install, but it isn't that good: first - it might add some issues, second - you will have to do it after each ROM update.
Second option is the best, I think.
try this app, for me it works with the latest king MT3G-Slide2G1 ROM
http://www.androlib.com/android.application.jp-co-c_lis-ccl-morelocale-qnpC.aspx
bluedragon1982 said:
try this app, for me it works with the latest king MT3G-Slide2G1 ROM
http://www.androlib.com/android.application.jp-co-c_lis-ccl-morelocale-qnpC.aspx
Click to expand...
Click to collapse
Err... I think you didn't understand first post ;-)
Brut.all said:
You could also use apktool to decode framework-res.apk file, add new locale, build it and install, but it isn't that good: first - it might add some issues, second - you will have to do it after each ROM update.
Click to expand...
Click to collapse
Will try it,but where I have to add new locale?
Framework-res.apk now decoded,but at which file are the languages?
Ganii said:
Will try it,but where I have to add new locale?
Framework-res.apk now decoded,but at which file are the languages?
Click to expand...
Click to collapse
You must create e.g res/values-fr (for French language) directory and place strings.xml file in it - similar to strings.xml in the res/values dir.
You should read about Android apps development.
After decoding the apk I add this to the "res" folder,maybe you can
check if it`s right?
Original framework.apk also attached!
Then,after decoding,I have to build new apk and sign it,right?
Hi
did anyone succed with this? In my case all the languages are existing in framework-res.apk but unfortunately only a few of them are available in the language settings menu. Does anyone have an idea on how the menu is set up?
Android localization tool
You can localize Android apps in up to 200 languages using this localization tool: poeditor.com. Translators will have a great time with it, as it offers various features such as translation memory and automatic translation via Google or Bing. :good:

URDU Reading/Writing Patch for HTC Sensation (Paki users)

Long time I searched to find a Solution to Writing and Reading Urdu Messages for HTC Sensation.. HTC mobiles dont include Urdu although Samsung does..
I almost made it possible with Thanks from baadnewz Arabic patch. Thus this Patch includes Arabic Fonts too.
I know most of you will say we can Write URDU but when u r actually writing it, its infact Arabic form.. Many letters dont work correctly..
(Tested on Sense 3.5; Not yet on 3.0.. If Someone with 3.0 can test and let me know if it works for him)
Here is a Simple Guide on how to do it:
A) Download URDU_Patch_HTC_Pyramid.zip and flash via Recovery and Reboot. (First Boot may take Long)
B) Download MultiLing from Market
C) Then Download Urdu Plugin Pakistani
D) Open MultiLing . Follow Steps in Main screen
1. Enable Multiling > Check Mark Multiling
4. Enable Languages > Leave Tick on Only English and Urdu. remove ticks from All others
When writing message, Long press Editing Area to Select Input method. Choose MultiLing. Swipe Spacebar in Keyboard to change Language..
Now you can Type Urdu in Correct fonts...
Will Hopefully Port for Other HTC Devices...
Hit THANKS if it Helped...
Screen Shots BEFORE and AFTER the Patch
(Mods Please Move to correct Section. Dont know where it should Belong...)
i will check this on my bro's phone can i test it safely on DHD too?
shieraz said:
i will check this on my bro's phone can i test it safely on DHD too?
Click to expand...
Click to collapse
I am sure it will work with DHD if its on Sense 3.5
Need to change the script as it wont flash on any other mobile except Sensation...
will ask baadnewz if he can help in changing the script and make it universally for all HTC sets with sense 3.5...
i will try this
when the link will work
Shery4life said:
i will try this
when the link will work
Click to expand...
Click to collapse
Sorry didnt know that Link was not working...
Now Fixed...
Nobody else LOL hard when they saw (Paki users) ?
Arthur Hucksake said:
Nobody else LOL hard when they saw (Paki users) ?
Click to expand...
Click to collapse
lets keep this thread clean of any Trolls...
If it was a personal hit, I could tolerate.. but when it comes to targeting my country's name, I wont... This is not ur racist forum..
I m happy u didnt mention ur Country in ur Profile, u literally saved her from spoiling her image...
Jjdoctor: i just saw asian version of app swype, it has urdu support as well, if you want it, then pm me, i'll send you a link.
Alipk52 said:
Jjdoctor: i just saw asian version of app swype, it has urdu support as well, if you want it, then pm me, i'll send you a link.
Click to expand...
Click to collapse
yes please PM me...
Can u type correct URDU with it? I mean whenever I used to type or when I got messages, it would read only Arabic words and where URDU words come, it just shows Blocks..
jjdoctor said:
yes please PM me...
Can u type correct URDU with it? I mean whenever I used to type or when I got messages, it would read only Arabic words and where URDU words come, it just shows Blocks..
Click to expand...
Click to collapse
Well you may know swype is a keyboard, a well known, as far as reading is concerned, you have posted proper patch for it, and yeah this arabic swype has pure urdu alphabets, you have to disable word suggesstions, auto-correct etc...and thats it, check your pm...good luck.
Alipk52 said:
Well you may know swype is a keyboard, a well known, as far as reading is concerned, you have posted proper patch for it, and yeah this arabic swype has pure urdu alphabets, you have to disable word suggesstions, auto-correct etc...and thats it, check your pm...good luck.
Click to expand...
Click to collapse
I got what u mean now.. Maybe RCMIX has include URDU Fonts by default otherwise you won't see exactly how URDU is written.. it will be in Arabic Form..
Below is a ScreenShot of InsertCoin WITH RTL Arabic Patch Installed and Asian Swype Keyboard.. I think ASAIN Swype keyboard is not meant for qHD Screen of Sensation ... We want bigger one.. In screenshot u can see "Kaf" is typed as "Gaf" and fonts are also not very good in joining... its more Arabic Like
"Yar Pakistan main tamatar kay kya rate hain"
Now See Below after you install my URDU Patch in OP, the Fonts make Sense and is more URDU like.. and the "Kaf" is correctly written..
Now Check Below, the MultiLing Keyboard which I like for its size and comfortability... It supports Urdu Dictionary too...
Hope that clears some part of it...
jjdoctor said:
I got what u mean now.. Maybe RCMIX has include URDU Fonts by default otherwise you won't see exactly how URDU is written.. it will be in Arabic Form..
Below is a ScreenShot of InsertCoin WITH RTL Arabic Patch Installed and Asian Swype Keyboard.. I think ASAIN Swype keyboard is not meant for qHD Screen of Sensation ... We want bigger one.. In screenshot u can see "Kaf" is typed as "Gaf" and fonts are also not very good in joining... its more Arabic Like
"Yar Pakistan main tamatar kay kya rate hain"
Now See Below after you install my URDU Patch in OP, the Fonts make Sense and is more URDU like.. and the "Kaf" is correctly written..
Now Check Below, the MultiLing Keyboard which I like for its size and comfortability... It supports Urdu Dictionary too...
Hope that clears some part of it...
Click to expand...
Click to collapse
It means with your patch it makes no difference between the accuracy of Swype with rcmix, and using multiling with insertcoin, but in my opinion the conclusion is for great urdu writing experience we need insertcoin+your patch+arabic swype...i hope you'll agree wiyh me, in your rom with multiling, the wordd "hay" and "bari yay" are seperated and same happening with swype in rcmix, but you can see the difference on your screenshot where youare using your patch + swype, it'll look more accurate...hope i have clearify.you properly
I ported those fonts and library files from Samsung mobile... luckily worked here.. Didn't know RCMix has it already... But most Roms here don't have Urdu fonts even after applying RTL patch...
jjdoctor said:
I ported those fonts and library files from Samsung mobile... luckily worked here.. Didn't know RCMix has it already... But most Roms here don't have Urdu fonts even after applying RTL patch...
Click to expand...
Click to collapse
Dost, can u share the files u took from Samsung? i tried few fonts still some characters dont seem to join..
I took fonts from here..
http://forum.xda-developers.com/showthread.php?t=1086632
And merged with RTL Arabic patch from here
www.mediafire.com/?le00tcvd7mabaob
And Simply copied all fonts from Samsung patch and overwrite the one in Arabic patch...
Main font file was DroidSansArabic.ttf...
I suggest you overwrite this font file only if you already have RTL and Arabic patch installed in your ROM...
If that doesn't help then download my patch and delete the phone Model ID detection line from updater script and flash in your mobile with same GB version...
jjdoctor said:
lets keep this thread clean of any Trolls...
If it was a personal hit, I could tolerate.. but when it comes to targeting my country's name, I wont... This is not ur racist forum..
I m happy u didnt mention ur Country in ur Profile, u literally saved her from spoiling her image...
Click to expand...
Click to collapse
JJ, don't think he meant it in a bad way. I loled tbh, i find it funny how pakistani people see it as a short word (which i completely agree with), when the rest of the world goes :"oooooooh, you can't say that"
jjdoctor said:
I took fonts from here..
http://forum.xda-developers.com/showthread.php?t=1086632
And merged with RTL Arabic patch from here
www.mediafire.com/?le00tcvd7mabaob
And Simply copied all fonts from Samsung patch and overwrite the one in Arabic patch...
Main font file was DroidSansArabic.ttf...
I suggest you overwrite this font file only if you already have RTL and Arabic patch installed in your ROM...
If that doesn't help then download my patch and delete the phone Model ID detection line from updater script and flash in your mobile with same GB version...
Click to expand...
Click to collapse
Please share the fonts as multiupload & such sites are dead now
For your information. All RTL patches are based on Madmack's Android Arabic shaping patch. You can apply it to any device (deodexed).
omar302 said:
For your information. All RTL patches are based on Madmack's Android Arabic shaping patch. You can apply it to any device (deodexed).
Click to expand...
Click to collapse
That's some nice info... But problem is not getting Arabic patch... It's actually getting Urdu fonts to work on it ..
Arabic is not Urdu although it matches 80% characters with Urdu... The remaining 20% are spelled wrong as it's missing Urdu fonts...
My patch just fixes those fonts making it compatible for both Urdu and Arabic at the same time...
fshami said:
Please share the fonts as multiupload & such sites are dead now
Click to expand...
Click to collapse
Multiupload is working... You can download my patch and extract the DroidSansArabic.ttf font from it and overwrite on your file of you already have Arabic RTL patch installed...

[CWM][MOD] Missing Indian languages fonts for KitKat / JellyBean / ICS

New File uploaded for KitKat
Instructions
-Download the zip of your desired font
-Boot into recovery
-Make a nandroid backup (Optional)
-Flash the zip
-Reboot
As Nexus 5 and Nexus 7 owner, you may have noticed the curious case of missing fonts for Indian languages in the OS. The truth is that this is like gingerbread and I don't see it being addressed soon. Luckily, Google has started to use Harfbuzz for rendering of complex scripts.
Here is a flashable zip that installs the fonts in the /system/fonts and updates fallback_fonts.xml in /system/etc. Its better than overwriting DroidSansFallback.ttf as it does not break any other glyphs.
This will enable you to read the languages even though rendering is broke for Yuktakshars, Halants etc.
If you want to see Android supporting Indian languages as soon as possible, I request all to star and comment on this issue in Android issue tracker - http://code.google.com/p/android/issues/detail?id=4153
https://code.google.com/p/android/issues/detail?id=16315
I have only tested this on my own Google Nexus S i9023 and Nexus 5 running on KitKat[Android 4.4].
[/SIZE]Google has included full rendering support(and fonts) for -
Tamil
Malayalam
Kannada
Bengali
Devnagari / Hindi
Telugu
This zip file has additional fonts for
Punjabi (being my native language)
Nepali
Assamese
Marathi
Gujarati
Oriya
Sindhi
Kashmiri
If you want a language in the pack, provide me font file and I will update the zip. Also if you need to type in your language,I'e found this keyboard to be the best https://play.google.com/store/apps/details?id=kl.ime.oh
BTW Thanks to The Fedora Project for providing Open Source Lohit fonts. Three cheers for them.
Liked the name of the attachment xD
From my fingers to your eyez
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Click to expand...
Click to collapse
This is neither a question or a problem but a solution however incomplete it is. Anyways glad to be able to post here on XDA
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Click to expand...
Click to collapse
This is not a question, he provided a solution. IMO this should be in the apps n themes sectn.
siffar said:
This is neither a question or a problem but a solution however incomplete it is. Anyways glad to be able to post here on XDA
Click to expand...
Click to collapse
thanks a lot 4 these..!
Tried Flashing on SGS... on luck
Tried Flashing on SGS through CWM Recovery.. on luck, got below error.
Error in Desi_Fonts.zip
Please help. Should it needs to be renamed to update.zip and then flash, Please guide.
What is error code and what version is your CWM
Sent from my Nexus S using XDA App
nagabushan.c said:
Tried Flashing on SGS through CWM Recovery.. on luck, got below error.
Error in Desi_Fonts.zip
Please help. Should it needs to be renamed to update.zip and then flash, Please guide.
Click to expand...
Click to collapse
Unzip and replace the copied fonts to fonts folder.
sekhargreen said:
Unzip and replace the copied fonts to fonts folder.
Click to expand...
Click to collapse
and not to forget to copy fallback_fonts.xml to /system/etc
lufc said:
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Click to expand...
Click to collapse
Dude - read the thread - n move it back to general
cdesai said:
Dude - read the thread - n move it back to general
Click to expand...
Click to collapse
General it is
cheers
it is working on motorola xoom runing on ics(teamos build rom). bangla fonts are rendering perfectly.
many many thanks to op. love you bro.
it is not working on cm7.1
it was installed successfully but not working...same problem...well i noticed that you zip cant replace the font correctly...am i wrong ?
by the way thank you so much for care this problem on android world
Let me look up on this problem.
Tried on CM7.1 on my Motorola Milestone - not working
Tried on my Motorola Milestone running on 2.3.7 CM7.1
No luck.
This is what i did:
Successfully flashed zip files from Open recovery,
All fonts got installed in /system/fonts directory.
Manually copied extracted fallback_fonts.xml files to /system/etc folder.
let me know if i need to do anything else.
Thanks for your efforts.
Not working on CM7
Flashed it with CWM.
Manually checked if installation went fine.
All fonts are available with same permission and config file is also proper.
But still rendering is not proper.
Let me know if any further details required.
Thx a lot for your efforts!!!
It didn't work on cm7 because there is no fallback.xml file in my system/etc.so after flashing zip the fallback.xml copy in system/etc but it didn't work.
vikasb32 said:
It didn't work on cm7 because there is no fallback.xml file in my system/etc.so after flashing zip the fallback.xml copy in system/etc but it didn't work.
Click to expand...
Click to collapse
Thanks for pointing this out guys. I suppose old method of flashing DroidSansFallback.ttf would work.
@siffar:
Please guide how to revert the flashed zip file.
I tried replacing Droidsansfallback.ttf with ROJanakannada.ttf, but still it displays your font only (lohith-kannada.ttf).I dont like lohith-kannada.ttf, all alphabets are separate.
suggestion: use ROJanakannada.ttf for kannada. It looks nice and does'nt splits.
thhhhhhnxxxxx

[HOWTO] Add Languages To Samsung Keyboard / Port Swype

this is my first tutorial, i hope i can explain everything good enough
today i will tell you, how you can add more languages to samsung keyboard.
and how you can port swype to every rom.
needed files:
in folder /system/app from the latest official firmware
AxT9IME.apk (& AxT9IME.odex*)
in folder /system/etc/permissions from the latest official firmware
touchwiz.xml
in folder /system/lib from the latest official firmware
libdhwr.so
libXt9core.so
only if you want to port swype, these files:
in folder /system/app from the latest official firmware
Swype.apk (& Swype.odex*)
in folder /system/lib from the latest official firmware
libSwypeCore.so
----------
now let's start:
1. replace/add all needed files in your rom
2. you can find the languages you want to add to samsung keyboard in the folder /system/t9db
you will need 3 different files for one language.
for example:
to add german language in your rom, you need these 3 files:
phonepad_de.kdb
qwerty_de.kdb
Samsung_400_DEusUN_xt9.ldb
add the language you want to use to /system/t9db in your rom
3. there is a need to add all languages (acronyms) you can find in your new /system/t9db
to others.xml ( /system/csc )
for example:
the code in others.xml for english (en), german (de), french (fr), italian (it)
Code:
<?xml version="1.0" encoding="UTF-8" ?>
<CustomerData>
<SettingsData>
<AudibleTouchTones>off</AudibleTouchTones>
<AudibleSelection>off</AudibleSelection>
<HapticFeedback>0</HapticFeedback>
</SettingsData>
<SamsungKeypad>
<inputlist>[COLOR="DarkBlue"][B]en(UK);en(US);de;fr;it;[/B][/COLOR]</inputlist>
</SamsungKeypad>
</CustomerData>
open /system/CSCFiles.txt
remove all lines with /system/T9DB/*
your cscfiles.txt should look similar like this:
Code:
/system/lib/libSwypeCore.so
/system/csc/contents.db
/system/csc/others.xml
/system/csc/feature.xml
/system/csc/sales_code.dat
/system/csc/customer.xml
/system/SW_Configuration.xml
/system/app/Swype.apk
/system/CSCFiles.txt
---------
thats all.
don't forget to set permissions.. clear dalvik and cache, reboot and write in your favorite language ​
nice work will try .
john9 said:
nice work will try .
Click to expand...
Click to collapse
i saw, that there are no csc files in aosp, cm9 and cm7...
so i have to add some more instructions to post#1
edit: done. correct me, if i have something forgotten.
if it is not working to port, i will try to fix it. if we can't port it, i will change the how-to to the simple "add languages"
maybe i will add a how to for adding languages to swype, but everybody can download the latest beta of swype on the website with much more included languages.
Dear texten.
I really did a deep study on this and i already done the things you mentiond.
However I have 2 problems.
1- the slide to change input langueges doesnt work.
2- arabic letters are not configured properly. It may due to font
Sent from my GT-I9001 using xda premium
CodeXpert said:
Dear texten.
I really did a deep study on this and i already done the things you mentiond.
However I have 2 problems.
1- the slide to change input langueges doesnt work.
2- arabic letters are not configured properly. It may due to font
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
hello mate.
to 1: do you mean the space bar in samsung keyboard to change language?
to 2: i think there is no arabic language pack
maybe you have add wrong language packs or wrong acronyms
i have successfully added language packs from kqg to kqb in my rom
texten said:
hello mate.
to 1: do you mean the space bar in samsung keyboard to change language?
to 2: i think there is no arabic language pack
maybe you have add wrong language packs or wrong acronyms
i have successfully added language packs from kqg to kqb in my rom
Click to expand...
Click to collapse
1 - Yes I mean the space bar,,
2- Roms that support Arabic languages are very rare we have only 2.3 and old 2.5 gingerbread from Samsung. havent received any updates since nov 2011
I really tried to port arabic languages from 2.5 to European Rom such us KQB. Took those files you mentioned + the whole csc folder + t9db + patched framework with araboc patch, but I failed
CodeXpert said:
1 - Yes I mean the space bar,,
2- Roms that support Arabic languages are very rare we have only 2.3 and old 2.5 gingerbread from Samsung. havent received any updates since nov 2011
I really tried to port arabic languages from 2.5 to European Rom such us KQB. Took those files you mentioned + the whole csc folder + t9db + patched framework with araboc patch, but I failed
Click to expand...
Click to collapse
it seems you made some mistakes in cscfiles.txt and/or others.xml
try with this files ,without the changes i made, from the firmware you grep the language pack.. just for testing
texten said:
it seems you made some mistakes in cscfiles.txt and/or others.xml
try with this files ,without the changes i made, from the firmware you grep the language pack.. just for testing
Click to expand...
Click to collapse
I will upload those files I managed to port and a flashable zip. You may find the solution though them
CodeXpert said:
I will upload those files I managed to port and a flashable zip. You may find the solution though them
Click to expand...
Click to collapse
ok i need all files , i have mentioned in post#1 - with the correct folder structure
edit: when i have more time, i will try this with cm9
well, i tried to port samsung keyboard to cm7.
there are much more changes needed as i thought.
so, i decided to change this tutorial.
maybe i will make a new thread only for "how to port samsung keyboard".
I've tried to port Samsung keyboard from 2.3 to CM9, it worked, but without xt9. Only QWERTY. On 3x4 layout I was able to type only numbers and symbols. When I've entered users' dictionary, it gave me FC. Logcat said language error. Don't have txt file at the moment.
przemcio510 said:
I've tried to port Samsung keyboard from 2.3 to CM9, it worked, but without xt9. Only QWERTY. On 3x4 layout I was able to type only numbers and symbols. When I've entered users' dictionary, it gave me FC. Logcat said language error. Don't have txt file at the moment.
Click to expand...
Click to collapse
for my port to cm7
samsung keyboard needs changes in the smali-files..
with the kernel of cm7. it is not able to vibrate.
many error output for vibrator.
texten said:
i saw, that there are no csc files in aosp, cm9 and cm7...
so i have to add some more instructions to post#1
edit: done. correct me, if i have something forgotten.
if it is not working to port, i will try to fix it. if we can't port it, i will change the how-to to the simple "add languages"
maybe i will add a how to for adding languages to swype, but everybody can download the latest beta of swype on the website with much more included languages.
Click to expand...
Click to collapse
Hate the keyboards which need full internet access, be aware that they may steal your passwords.
So to port swype is to just take those two files mentioned above and put it in any rom right? and will it work on cm9/cm10?
Juhan Jufri said:
So to port swype is to just take those two files mentioned above and put it in any rom right? and will it work on cm9/cm10?
Click to expand...
Click to collapse
Here you are pal: http://forum.xda-developers.com/showthread.php?t=2054414
[APP][ICS/JB] SWYPE BETA 1.3 for ALL devices and roms!
send from my card board box using ProjectStock 4.0
Can't find the files
I am trying to install arabic language support on galaxy note SweetROM v5 LSF but I can't find CSCfiles.txt at all
Is it OK to do the tutorial without having to edit CSCfiles.txt ??
Though I have found /System/csc/contents.db which contains similar links to system files with file size value, Should I try & edit that ??
Also others.xml doesn't have those lines mentioned in the tutorial, but there's language.xml file which have <languageSet> <Display> and <Input> <SupportList> tags .. Is that the file meant for editing?
Mohammed Atef said:
I am trying to install arabic language support on galaxy note SweetROM v5 LSF but I can't find CSCfiles.txt at all
Is it OK to do the tutorial without having to edit CSCfiles.txt ??
Though I have found /System/csc/contents.db which contains similar links to system files with file size value, Should I try & edit that ??
Also others.xml doesn't have those lines mentioned in the tutorial, but there's language.xml file which have <languageSet> <Display> and <Input> <SupportList> tags .. Is that the file meant for editing?
Click to expand...
Click to collapse
if you dont have these lines, just copy and paste. and edit the parts which are needed to add the new language. the tutorial works if you doing it step by step.
good luck
Hi guy, I think this instructions is only work with old version of Android and newer version maybe different. Any instructions of how to this on Android MM?

Categories

Resources