Database Info

HTC Touch Pro Annoyances

So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just have to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!

ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- Volume is too low during conversations, it has to be fairly quiet around to be able to hear the other person (even with the volume turned way up)
Click to expand...
Click to collapse
Tweaks enough around
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
Click to expand...
Click to collapse
I don't have that problem?
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
never had that either
- Answers calls in pocket. You go for the phone, but the touch screen is on and you answer or hang up (in my case apparently almost always hangs up) while the phone is still in your pocket. Also VERY annoying.
Click to expand...
Click to collapse
try this solution
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
Click to expand...
Click to collapse
Did you try a different alarm already?
- Then there's the slowdowns.. not really a fault, but like windows 95 it can become very slow or unresponsive for a short period for unknown reasons. A phone has to work when you need it... not delay you for 30 secs while it thinks things over. I've had to reset my phone a couple of times this month. (No I didn't run 10 apps at the same time while trying to use TF3D to look at pictures)
Click to expand...
Click to collapse
Don't have that problem
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Now you mention it, yes, that is annoying... Would love to see a tweak for that as well!!
These problems are the reasons that I'm considering selling my phone to some other unfortunate person. They are BASIC functions that just has to work! I love the HTC touch pro for it's PDA functionality and my Tom Tom maps etc. but I'm really starting to hate it for these basic functionalities that work very poorly!
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
A lot of these problems though, are mentioned throughout this forum, and can be solved. Either by ROM updating, or tweaks... What Rom are you running?

I understand completely. I feel differently though. My TP is the best phone ever. The issues I have were seen on my previous devices (HTC devices for the US). The faster processor, increased storage, and TF3D make me happy. Don't get me wrong, I have cussed at this phone, missed inportant business calls, and missed a flight thanks to the alarm. I soft reset 1 - 5 times a day to proactively minimize these issues. But overall, the TP is a huge improvement over my Wing. So long as my new devices are improvements to the one before, I am happy. I can't live with a standard cell phone, and love my Raphael.

joeltje said:
I don't have that problem?
Click to expand...
Click to collapse
Try calling your phone from a land line phone.. how long does it take before your cell actually start ringing?
joeltje said:
Did you try a different alarm already?
Click to expand...
Click to collapse
Yes, but it happens so rarely I can't say if its the sound. Besides, it's the rooster sound that came with phone. No matter what it should never happen. It happened on my TYTN II too.. So I guess it's probably a windows thing.
joeltje said:
Have you considerd a custom Rom yet? I am currently running the DCS Rom, and don't have the problems you mention above. It made my TP much more responsive!
Click to expand...
Click to collapse
Hmm.. I might try that.. but I often see people start having entirely different problems with their phone then (lock ups and strange behaviour). If there is a stable ROM that fixes these issues and doesn't break down hard once every week. I'm all for it!
I'm running the standard ROM that came with the phone. Ver.: 1.90.403.6 DAN (Danish) ROM date 08/23/08, Radio: 1.02.25.19, Protocol: 52.33.25.17U

If I call my cellnr. from the home phone, it starts ringning as quickly as all my other mobile phones... So no, I really don't have that problem, thoughj I did just see another topic from somebody with exactly you problem: http://forum.xda-developers.com/showthread.php?t=432415
You might want to follow that.
On the alarm, I have 2 kids, so I don't use an electrical alarm Sorry...
The different ROM may be something you can test at least. It fixed a lot of annoyances for me anyway. Look in the Wiki for different Custom Roms, there are a couple out there, and for me, DCS worked best. You can always go back to original, should you not like the ROM. I'm running DCS now for three days, no resets, and it is still fast....

ssndk said:
- Sometimes trying to call a number, the phone will just display the Calling Number screen and you hear no sound at all in the speaker.. then after 10 seconds it will end with 3 beeps.. Like it couldn't get a signal or something, even though there's plenty of signal on the signal gauge. You try again 2-3 times before it works.. REALLY annoying (Never had a phone that did that, other than the TYTN II!)
Click to expand...
Click to collapse
The issue above really annoying. Normally that will cause my TP to go mute and can't hear each other. Have to soft reset. This issue is discuss in another thread here. Since I'm overseas for at the moment, can't go complain to my vendor.

ssndk said:
- It takes 4 seconds to lock the phone (So that it doesn't also MAKE calls in your pocket) .. is there a way to tweak this? Like only pressing the off-hook button for 1-2 seconds instead?
Click to expand...
Click to collapse
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked

Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least

joeltje said:
Nice, 1 Question though; What happens if you make a call? The display goes of as well then, will the keyboard then lock as well? Cause that's not handy, to say the least
Click to expand...
Click to collapse
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..

So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?

joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
you can extract the stylus but the you have to juggle around with it OR you can press the standby button on top to unlock it. It's a pain I know but the problem is that it is a touch screen so pressing a button to unlock is less worse than without it.

So functionality actually remains as it is now... That's good, I'll give it a try!

joeltje said:
So if I'm listning to my voicemail, and need to press "3" for deletion, I can't? Or will it disable after I extract my stylo?
Click to expand...
Click to collapse
It unlocks when the stylus is extracted..

ssndk said:
So it's been a month since I got my HTC Touch pro and all the problems I have with it, I've had with the HTC TYTN II. To list them:
- There's a 2-3 ring delay on incoming calls.. which means people hang up before you get a chance to answer.
I know other people have experience the same problems.. couldn't we make a sticky with problems and possible solutions for it? I also really hate that fact that I have to hack my phone in able to make it function properly!
Click to expand...
Click to collapse
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J

ssndk said:
The touch screen locks, but the keyboard (Off-hook etc.) button doesn't..
Click to expand...
Click to collapse
Try SensorLock. It's a great little utility that unfortunately has stopped working for me. Must be something I poked somewhere. lol
As for the alarm, mine works fine... but I do notice the ringing a couple of times on the sending end before the phone starts to ring. I'd sort of passed that off to a network thing, not a phone thing.

The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...

Quote:
- Alarm or snooze malfunctions. This happens rarely for me, but since I use it everyday as my alarm for waking up, I notice! It's not because I sleep past the alarm. I've been lying awake listening for it to ring... the vibrator works, but no sound is played. This means that I can't trust my phone to wake me up if I'm going to catch a plane or other important stuff. It's very rare, but it happens.. it also did on my TYTN II, except that didn't even vibrate! My guess is windows is busy doing something else .. then doesn't play the sound properly.
TRY G-Alarm. It works well for me.
Klaxon (sp?) alarm looked cool and would have also been practical, but it would crash - totally unreliable.

[email protected] said:
Sounds like you are using a ringtone from your microSD card. This will cause a delay. Your ringtones need to be copies to your device and activated by holding the stylus over your selection & hit set as ringtone.
Hope this helps,
Rgs,
J
Click to expand...
Click to collapse
No, in my TPro the delay is exactly the same (oviously using the same mp3 file in memory card or in the device)..i've reduced delay sound installing Diamond tweaks and setting "without delay" in ring tone..then i've erased diamong tweaks because use too much battery now i have only 1 ring with light (and identified call incoming on the screen) and without sound, and BEFORE the second ring my device correctly sound

bugsykoosh said:
The 3 second ringtone delay is a WM issue. Look at the postings for VAlert in the general hacking section. The only known fix is http://www.tweaks2k2.com/portal/staticpages/index.php?page=20050224182009983
but no one seems to have figured out their registry setting change...
Click to expand...
Click to collapse
If your referring to this one,
108-Allow users to disable the 3 seconds delay between rings in devices with Windows Mobile Phone Edition
Click to expand...
Click to collapse
see the following thread at PPCGeeks.
If your talking about the fact that the NAV wheel starts flashing 5 seconds before the audio starts playing, then it's not the same scenario.

ssndk said:
Using the registry hack for the touch diamond I'm now using the "lock on backlight turned off" fix.. it works, and my phone locks when I press the screen off button. Way less annoying than waiting 4 seconds for it to lock.
HKEY_CURRENT_USER\ControlPanel\BackLight\AutoDevic eLockEnable from 0 to 1 and everytime your backlight goes off the device is locked
Click to expand...
Click to collapse
I have a HTC TouchPro and had the same issue of not wanting to press the long press end key for 5 seconds to lock the phone. I tried the code you gave and unfortunately the phone still does not lock when I push short press the power button to turn off the back light and put th phone in sleep mode. I really want this to work since when I am driving, I think when I go through good and bad coverage areas, the phone will automaticallly wake up about 3 times each way, so if it is not locked, I can accidentally call people while driving.

Stop returning to Home tab on wake up

Hi all. Slowly battling through these annoyances.
I can't find anything about this on a search, but I'm sure I remember reading about it. Does anyone know how to stop the device returning to the Touchflo 3D home tab every time I wake the device up? It's annoying when it goes off when I'm writing a text message or in a call or listening to music and I have to navigate all the way back.
Also, is there a definate answer to the "screen off during call" thing? I guess I could live with it for now if I can fix the other problem.

Hi, this will not help you but just for your info: my TF3D doesn't return to the home tab after wake up... You have a branded phone?

mine does'nt either so the answer is to switch over to ROMeOS rom

mike freegan said:
Hi all. Slowly battling through these annoyances.
I can't find anything about this on a search, but I'm sure I remember reading about it. Does anyone know how to stop the device returning to the Touchflo 3D home tab every time I wake the device up? It's annoying when it goes off when I'm writing a text message or in a call or listening to music and I have to navigate all the way back.
Also, is there a definate answer to the "screen off during call" thing? I guess I could live with it for now if I can fix the other problem.
Click to expand...
Click to collapse
Mine does it sometimes but usually a soft reset stops the return to home screen.

Perhaps I wasn't clear enough. I'm not bothered which tab it returns to, but say I have messaging open and the device falls asleep, when I wake it up it returns to the home screen so I have to navigate back to where I was. It's very annoying.
My unbranded 405 ROM TP does it and my gf's Orange branded Diamond does it.

mike freegan said:
Perhaps I wasn't clear enough. I'm not bothered which tab it returns to, but say I have messaging open and the device falls asleep, when I wake it up it returns to the home screen so I have to navigate back to where I was. It's very annoying.
My unbranded 405 ROM TP does it and my gf's Orange branded Diamond does it.
Click to expand...
Click to collapse
Like i said, soft reset. Sometimes is could be a new bit of software you've installed, not much you can do about it unless you unistall it!

I've softresetted my device dozens of time's, I'm on ROMeOS but I have the same problem it doesn't stay in the app or folder where I left it, I have wondered about this. Others do to apparently, no help from me though

johnk1973 said:
Like i said, soft reset. Sometimes is could be a new bit of software you've installed, not much you can do about it unless you unistall it!
Click to expand...
Click to collapse
It's always done it, and my gf's diamond has always done it. It's definately a feature of the ROM and is highly annoying.

What about the option for returning to the today screen in the Today options? Try setting it to never and see if that fixes it for you.

TaurenSnake said:
What about the option for returning to the today screen in the Today options? Try setting it to never and see if that fixes it for you.
Click to expand...
Click to collapse
That sounds just the trick, but where is this option?
Can't see it in in Start > settings > today
EDIT: found this on the Diamond forum: http://forum.xda-developers.com/showthread.php?t=409374
They have the same problem. the thing you suggested is for today timeout. It won't affect how locking takes me back to the today screen.

Come on guys, this is super annoying. Surely someone must have a solution?
I leant my phone to the singer in my band today as he was reading some lyrics from the internet for a cover song we're doing. He was going mad about it because the damned thing kept returning to the home screen mid-song.
I like the lock/autolock feature but I don't want it to go back to the home screen every time.

For your "screen off during call" problem, try http://forum.xda-developers.com/showpost.php?p=2767033&postcount=23
Read the thread for more information.

phone auto answering calls ????

So i got my new phone and it's driving me nuts! Every time i get a phone call it picks up literally after 5 seconds even without touching it. I already checked the phone options and the automatic pickup is not checked. Is there another option that i'm missing?

go to start> settings> personal tab> phone >(scroll over to) more tab> and there u should see a automatic answering check box uncheck it.

i already did that. it's unchecked. it seems to only do it when the phone is locked and the screen is off.

hmm i am not really sure i remember seeing another place where it had auto answer option but idk where. Hopefully some one else can help?

i really hope someone can. i've tried sensor lock but it doesnt seem to work

Does this happen if the phone is just sitting there out of your pocket?
I know mine has answered a few phone calls on it's own because the screen turns on and unlocks when a call comes is, so it's possible for the answer button to be pressed while it's still in your pocket.

Try PocketShield and let me know if this works for you.

latest Gyrator has autoanswer if coming from standy on Portrait mode... do you have gyrator installed?

how do i turn this off i dont want calls answered unless i click on yes

Problems in my pocket!

Apologies if this question has been asked and answered before, but if so, could someone please redirect me. This is my first time on this forum. I've had my HTC Touch Pro (Raphael) for a couple of months now, and cannot get round the problem that whenever I receive a call, I somehow manage to cut it off before I can get the phone out of my pocket. I have tried several different cases (the current one opens like a book, so doesn't press any of the buttons), but something happens in the process of removing the phone from my pocket, however gently and swiftly I try to do it, which means that all I get is a "missed call" message, even after only one ring. If the phone is on a flat surface, it will ring for a long time, so it's not that setting. This is SO frustrating, especially when you try to see who called you, and it just comes up with "unknown caller".... it's also costing me a lot of money having to phone people back when I do know who they are. Please help somebody. I really like my little phone, but it may well end up being thrown out of a window at this rate! Thank you!

Check out this utility here on XDA. Works great. Unlock the phone by rolling it over. It uses the gravity sensor.
http://forum.xda-developers.com/showthread.php?t=422871

Many thanks for that. We've installed this thread, although I'm not really clear about what it does. It seems I can now lock and unlock the phone by turning it clockwise and counterclockwise respectively along its axis (in addition to the long press, which is what I usually use to lock the phone).
I tried answering one call whilst it was locked, but couldn't free it up to press the "answer" key until I had turned it several times. Fortunately, the caller was quite patient! Is this just a technique I have to get used to, and will it mean that I get a chance to answer calls before the connection is severed? Sorry to sound so thick, but this is all very new to me.

Sarahah said:
Many thanks for that. We've installed this thread, although I'm not really clear about what it does. It seems I can now lock and unlock the phone by turning it clockwise and counterclockwise respectively along its axis (in addition to the long press, which is what I usually use to lock the phone).
I tried answering one call whilst it was locked, but couldn't free it up to press the "answer" key until I had turned it several times. Fortunately, the caller was quite patient! Is this just a technique I have to get used to, and will it mean that I get a chance to answer calls before the connection is severed? Sorry to sound so thick, but this is all very new to me.
Click to expand...
Click to collapse
Go to the settings menu and edit your SensorLock preferences to lock the screen only on an incoming call thus leaving the buttons unlocked.

Maybe the "face down mute" is happening to your calls? Try disabling it.

Um..... how?

answer keys disabler
You the thread below, it disables the onscreen answer buttons while ringing. Helps me getting the phone outta my pocket when ringing
http://forum.xda-developers.com/showthread.php?t=425650

Ooooh. Thank you. Sounds like just what I need ... watch this space!

if u want to thrown your htc trough windows, how about if u thrown it to my window bro.

HHumbert said:
Check out this utility here on XDA. Works great. Unlock the phone by rolling it over. It uses the gravity sensor.
http://forum.xda-developers.com/showthread.php?t=422871
Click to expand...
Click to collapse
Gravity sensor... I ever seen this technology on nokia phone. but until now I'm still amazed by this technology. how this sensor works..
sorry 4 my english cause I'm from asia

Ah Dedy - if I win the lottery I shall come and throw a brand new Touch Pro through your window, I promise! I'm afraid that I'm having far too much fun with this one (despite the problems in my pocket) to part with it just yet though. Hope you have a great Christmas, and maybe Santa will bring you one, you never know!

Automatically activate speaker when placing phone face down

On my old Rhodium TP2 there was a feature to automatically activate speaker when placing phone face down. Is that possible with HD2?

Err... yeah. You just place it face down

johncmolyneux said:
Err... yeah. You just place it face down
Click to expand...
Click to collapse
LOLLLL
didn't know that

It never worked for me for some reason. It could be disabled but I can't find the setting to turn it on. Anyway, I am planing to do a hard reset this weekend and see if that feature is back.

ma6inista said:
It never worked for me for some reason. It could be disabled but I can't find the setting to turn it on. Anyway, I am planing to do a hard reset this weekend and see if that feature is back.
Click to expand...
Click to collapse
I can only assume it will be there after a hard reset, as it's something I've used countless times and have never had to enable it. (I seem to remember reading it in the manual too!)

Confirmed working with Dutty's ML series ROMs.

It does not work for me. WWE ROM. I just did a hard reset.

Always worked for me on Stock 1.66 ROM.

Working on Axlor.
Weird this, ive always wanted it!
and just never tried it

joshzzz2001 said:
It does not work for me. WWE ROM. I just did a hard reset.
Click to expand...
Click to collapse
that's strange. the feature is documented in the HD2 manual, so it at least works on all stock ROMs. If not, approach HTC support.

i'd say if it doesn't work, its something related to a flashed rom and a setting more than anything else

Turing On Speaker While Facing Up More Useful
I would rather somehow have the proximity sensor turn the spearkers on while the phone is facing up because it would be nice to multi-task and take notes or update my contacts while I am talking to that person/business. For example, a business gives me an RMA so I would have to edit my notes for that contact and enter the RMA number. I can't do this while the phone is faced down.

yea the speaker function works the same on mine as on the TP2

Is there a setting or reg key that I can change to enable this? (doesn't work on Artemis 6.0)

ma6inista said:
On my old Rhodium TP2 there was a feature to automatically activate speaker when placing phone face down. Is that possible with HD2?
Click to expand...
Click to collapse
Maybe it's too late and you already found the solution but here it goes for other people:
To turn the HD2's speaker on do one of these:
1 - Long press phone button (furtherest left)
2 - Turn it upside down
3 - On the call screen slide down & press the speaker's button