Related
I read in the wiki for WM5_Tweaks_Other that it is possible to tweak the registry to enable "E" icon when in EDGE networks. It goes something like this:
If your network provider supports the Edge network (and your device does as well), you can use the following to show a little 'E' icon instead of 'G' icon when connected to an Edge network:
HKLM\Drivers\BuiltIn\RIL\EnableDifferGprsEdgeIcon = 1 (DWORD decimal)
I tried this on the Treo 750. EnableDifferGprsEdgeIcon did not exist under RIL, so I added it and set the value and it did not work.
Wondering if anyone figured out how to enable the "E" icon?
Doesn't work on my HTC TyTN too. Registry entry wasn't there so probably we are missing something else too, not just that single reg key.
Hmmm
Hi,
I thing that it is relatred with the phone subsystem and each one is different. Palm has one version TyTN has another version.
It is just a guess.
Regards,
Taguapire.
I have I-Mate SP5 Smartphone and HTC TyTN PPC Phone - both are Windows Mobile 5 and registry looks very alike, both have this entry: "dll=ril.dll" or something like that in the same place where is the mentioned "Edge" registry entry, but one device has a lot more reg entries there then the other, so it's probably down to radio version/implementation.
Today I was switching band in UMTS/EDGE area. Each time I was switching band phone was logging out the network then logging in again. When I was going from UMTS to GSM I noticed [E] icon appearing for about 0,2 second (it was when I was logged to UMTS network) and then turning to [G]. I'm sure I was in EDGE area (I was in the ceter of Krakow, one of the biggest cities in Poland).
Conclusion is that Treo DOES HAVE Edge icon, but we need to find the way to use it... Any ideas?
I also looked in registry like schriss said. There is entry about dll file. I have set rilgsm.dll. But in the \Windows directory there's also ril.dll. Maybe something is with those files?
Does the Treo allow you to lock it in EDGE/GSM mode?
juiceppc said:
Does the Treo allow you to lock it in EDGE/GSM mode?
Click to expand...
Click to collapse
You say not UMTS or automatic?
If is it, you may found this in phone settings, 2nd tab, band selection.
bleony said:
You say not UMTS or automatic?
If is it, you may found this in phone settings, 2nd tab, band selection.
Click to expand...
Click to collapse
Thanks. Just got my Treo today! Keeping it at Edge. Seems faster than all my other Edge phones.
I just upgraded to WM6. The icon now shows H when I'm in HSDPA. I've also seen it switch to 3G from time to time. (I'm assuming that's either Edge or UMTS) I'll have to see if it goes to E when I travel far enough away from the city where HDSPA isnt available yet
s4czech said:
I just upgraded to WM6. The icon now shows H when I'm in HSDPA. I've also seen it switch to 3G from time to time. (I'm assuming that's either Edge or UMTS) I'll have to see if it goes to E when I travel far enough away from the city where HDSPA isnt available yet
Click to expand...
Click to collapse
I know that E icon is in WM6, but I'd like to activate it somehow in WM5 (I'm not upgrading now...)
Stupid Question? How do I enable HSDPA on the Fuze? I am only getting UMTS speeds. There is no setting entry in connections for HSDPA like there was for the Kaiser. I enabled HSDPA in Kaisertweak but still am only getting UMTS speeds. The icon on top shows only 3G but not H.
Start>Settings>Phone>Band,first row...
AT&T Fuze Can't Enable HSUPA
I just got my Fuze today. HSDPA is working great (around ~1.2Mbit) however HSUPA is off. I tried installing the advanced configuration tool from touchxperience to set it. I also have tried adding the SupportHSUPA DWORD to the registry manually. But to no avail... seems like my upload is capped around 60kbps. I was getting just over 300kbps upload on my Tilt.
Does anyone else have this issue? Is there anything more that I can try? I will need to tether with this device and no HSUPA would suck!
-e
TomasNM said:
Start>Settings>Phone>Band,first row...
Click to expand...
Click to collapse
Unfortunately, that just changes auto setting to preselect. Did not make a difference.
though I do not have a Fuze but you could try Schaps Advanced Configuration 3.3 Tool. It has an option to turn it on
Did not do the trick. Weird, in the Windows directory, there are 2 htm files - HSDPA and HSUPA. Clicking the files displays instructions on how to enable HSDPA and HSUPA - go to settings/connections/advanced network. But there is no such option under "advanced network" on the Fuze
Ok. I disabled HSDPA in Kaisertweaks - reset. Then i enabled HSDPA and powered down to make the registry change stick - reset. Now, I have the H icon and HSDPA speed - 1200 kbit/sec. However, after the next reset i am back to UMTS - speed 360 kbit/sec. I checked under HKLM-Software-OEM-RIL - and the setting to enable HSDPA is still there. I don't get it.
kiasertweak works on the Fuze??
TurboX2 said:
kiasertweak works on the Fuze??
Click to expand...
Click to collapse
Most of the registry entries should work since they are not specific to the Kaiser.
I'm interested in this as well.... There should be some file to enable HSDPA on this device.
OK here it is... seems to work well! Remember, use something like Total commander and when done making the changes, POWER OFF and then POWER ON. Soft-Reset won't work:
HKLM\Software\OEM\RIL\DisH
0 - enabled
1 - disabled
This is a registry setting to disable HSDPA, not enable it. So if it's not present in your registry, then HSDPA is on by default. On my FUZE, it was set to 1 (disabled)
The hack for the icon is:
HKLM\Software\OEM\RIL\EnableHSDPAIcon
0 - disabled icon
1 - enabled icon
set value to 1. On my FUZE, it was set to 0.
But that won't actually change the speed.
iboj007 said:
OK here it is... seems to work well! Remember, use something like Total commander and when done making the changes, POWER OFF and then POWER ON. Soft-Reset won't work:
HKLM\Software\OEM\RIL\DisH
0 - enabled
1 - disabled
This is a registry setting to disable HSDPA, not enable it. So if it's not present in your registry, then HSDPA is on by default. On my FUZE, it was set to 1 (disabled)
The hack for the icon is:
HKLM\Software\OEM\RIL\EnableHSDPAIcon
0 - disabled icon
1 - enabled icon
set value to 1. On my FUZE, it was set to 0.
But that won't actually change the speed.
Click to expand...
Click to collapse
This works once (after powering off and then on). After the next softreset, icon goes back to 3G and you have no HSDPA.
This device is starting to frustrate me. Only on AT&T can you be sitting in an area with FULL 3G service and be getting speeds of 20Kbps.
This is ridiculous. So ATT obviously does not want us to use HSDPA, probably because the stupid iPhone is eating up all the bandwidth. Out of the box HSDPA is disabled and there is no tab in settings to enable it. For us that are knowledgable, we are able to hack the registry but the changes do not stick. I guess i have to go with a non-ATT cooked ROM to hopefully solve this issue unless some of the smart guys here on the forum are able to fix it.
GermanGuy said:
This is ridiculous. So ATT obviously does not want us to use HSDPA, probably because the stupid iPhone is eating up all the bandwidth. Out of the box HSDPA is disabled and there is no tab in settings to enable it. For us that are knowledgable, we are able to hack the registry but the changes do not stick. I guess i have to go with a non-ATT cooked ROM to hopefully solve this issue unless some of the smart guys here on the forum are able to fix it.
Click to expand...
Click to collapse
hmmm....This seems very interesting. I wonder why it is not enabled out of the box. I guess I will have to do this registry trick after I set everything up and never do a soft reset until someone cracks the code.
slow speeds
Hey gang,
I can confirm that the registry hack seems to stay on my Fuze even after a soft reset, but the speeds I am getting are not 3G speeds. Is DSL reports reliable for the Fuze. I just went there and did the 100k test and only was getting 106 on that! Not good! What are other folks getting and what did you do to increase speeds?
thanks,
d
ArmyDoc said:
Hey gang,
I can confirm that the registry hack seems to stay on my Fuze even after a soft reset, but the speeds I am getting are not 3G speeds. Is DSL reports reliable for the Fuze. I just went there and did the 100k test and only was getting 106 on that! Not good! What are other folks getting and what did you do to increase speeds?
thanks,
d
Click to expand...
Click to collapse
I can also confirm that the registry hack stays in place. You think that 106 is bad, I'm getting a steady 25 Kbps. I tested this on DSL reports and by using my slingplayer.
I've called and complained to ATT 3 times already today and all they tell me is that "you may experience slow connections speeds blah blah blah".
What makes me want to jump off a bridge now is that I just tested my net in my Tilt and I just got 466 Kbps with HSDPA. I have a feeling that AT&T has limited the FUZE on purpose. This just sucks.
iboj007 said:
I have a feeling that AT&T has limited the FUZE on purpose. This just sucks.
Click to expand...
Click to collapse
That is exactly what I think is going on.
In an even odder twist, disabling the HSDPA hacks bumped my speed waaaaaay up. I am able to watch Slingbox @ 350 Kbps steady and DSL reports now shows 617 kbps.
Can anyone else confirm this behavior?
I've done Advanced config, Kaisertweak and the registry edits and the 1mb dslreport was 816... then redid immediately and got 126... I will attest to the softreset/HSDPA vanishing act too
I've been trying to find a way to disable 3G on my new HP iPAQ 910c I got through Rogers Wireless a few weeks ago. I find the battery drains pretty quickly on the phone, and from what I've read forcing it down to GSM when I don't need the 3G speed will help that alot.
My problem is that when I go to the Phone Settings, there's no "Band" tab in which to designate that I want to limit to GSM. From everything I've read the tab *should* be there, but it's not. What tabs are there are the following:
Phone
Security
Services
Network
TTY
PIN2
AOC
More
Doing some searching, I came across this post from last year that addressed a similar issue with an HTC Diamond on the Rogers network.
raidendb wrote:
Just want to share this. But I'm pretty sure this has been tackled in the forums already.
Rogers branded HTC Diamond doesn't have the option to turn of 3G through band selection. I found this registry hack to enable band selection and now I can turn 3G off.
Rogers default registry - OFF
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:0
Registry tweak to enable band changes
[\HKLM\Software\OEM\PhoneSetting\]
"ShowUMTSBandPage"=dword:1
Now you can go to >start>settings>phone>band tab and change band settings to your choice. I switched mine to just use GSM instead of auto which always connects on 3G.
Click to expand...
Click to collapse
The issue with that suggested fix is that I don't have a "PhoneSetting" key under \HKLM\Software\OEM (or anywhere for that matter) on my iPAQ. I tried adding it, and then adding the "ShowUMTSBandPage" dword, but that didn't seem to have any effect (even after a soft-reset).
If anyone has any ideas on how I can enable the Band phone settings tab, or otherwise turn off 3G on occasion on my phone, it'd be greatly appreciated.
This one time, at band tab...
try DHR Bandswitch
Thanks. I installed it and it seems to kindof work. I've posted my questions about it in the Bandswitch thread.
Congrats.
hi guys i recently upgraded from the at&t tilt to the fuze. on the tilt i had the hsdpa network unlocked via the app "kaiser tweaks", i tried it on my fuze with no luck. without using a cooked rom is there any app i can get to unlock hsdpa?
hsdpa isnt locked out, its just hidden under the umts (3g) icon. theres a registry tweak to disable this to get the h icon back. theres 1 registy entry that disables hsdpa (already enabled) and 1 registry entry that disables the icon. im not sure what they are, ill look around for it. hsupa is disabled by default how ever on some roms. setting HKLM\Software\HTC\AdvancedNetwork\SupportHSUPA to 1 should enable it. dunno which roms have it enabled and which dont.
Does anyone know why the registry hack for enabling the Mode of Operations in Sprint's 1st generation Touch Pro (wm6.1 stock ROM) does not work for Sprint's Touch Pro2 (wm6.5 stock ROM)?
For Sprint's 1st generation Touch Pro, Mode of Operations menu can be enabled by going to registry\HKLM\SOFTWARE\OEM\PhoneSetting and changing the value of 'HiddenModeOperationPage' from 1 to 0. Then, in Comm Manager, you could click Menu, Phone Settings, Services Tab, and scroll down for "Mode of Operations". And you will see "Hybrid", "EVDO only", and "1X Only" as options that you can select. Others even made a mortscript-based toggle switch to toggle quickly between Hybrid and 1X Only modes.
I find the same registry key in Touch pro2 (wm6.5 stock ROM), but changing the value of 'HiddenModeOperationPage' from 1 to 0 still does not bring the mode of operations menu in the Phone settings/CDMA services tab. I checked the registery key to make sure the value was still 0, and it was. But I still cannot get mode of operations menu.
This is needed to save substantial amount of battery if you live or work in an area where EVDO signal is weak and your phone is constantly jumping between weak EVDO and better-signal 1X.
Also use of Sprint's Airave, which only provides 1X, can be enhanced by forcing 1X only mode because you don't want your phone to try to switch to a far away EVDO tower momentarily because of the weak EVDO signal in your place. That would result in dropped calls all the time because sometimes calls come through when you are momentarily connected to the far-away tower.
There are mortscript-based toggle switches that people have made for custom ROMs with wm6.5 (see post#2 here), but I need to get the mode of operations menu to show up in Touch Pro2 first.
I really need this, so if anyone knows how to get it working for Sprint's Touch Pro2, please let me know.
Yeah, i wanna know how to force 1x over EVDO. The battery when in EVDO mode is very quickly drained. I see my touch pro 2 have this "force" function in GSM mode, but not CDMA. TIA
bmw2320 said:
Yeah, i wanna know how to force 1x over EVDO. The battery when in EVDO mode is very quickly drained. I see my touch pro 2 have this "force" function in GSM mode, but not CDMA. TIA
Click to expand...
Click to collapse
yo want 1x over evdo put a non-evdo prl.
But the phone like to switch back & forth 1x and EVDO. In my country, Indonesia, the EVDO signal is not as good as 1x so I just wanna stick to 1x (for battery reason) unless i wanna use unlimited internet with EVDO. It could be done with GSM (GPRS/EDGE vs 3G/HSDPA) so why couldn't with CDMA? TIA
explisiv said:
yo want 1x over evdo put a non-evdo prl.
Click to expand...
Click to collapse
i have evdo working.......hmmm.....do you all have the 10.key in the dmu folder on there?
explisiv said:
yo want 1x over evdo put a non-evdo prl.
Click to expand...
Click to collapse
I need an easy, convenient way to turn off EVDO just like you can turn off 3G in iPhone 3Gs phones with just a button in its settings menu. Read my original post, a convenient menu, for turning off EVDO in Sprint's Touch Pro exists and can be easily turned on by a simple edit of the registry. The menu is called Mode of Operations in Touch Pro.
But that menu has been replaced in new Sprint's Touch Pro2 (wm6.5 stock ROM) by a different Mode of Operations menu that lets you choose between CDMA or GSM networks for when you want to use the phone outside U.S. So I want to know how to get a menu in Sprint's Touch Pro2 to TURN OFF EVDO MANUALLY AND CONVENIENTLY just like it was possible to do in Touch Pro 1 and is possible to do on iPhone 3Gs. The purpose is to save battery for operating your phone in areas with low EVDO signal.
wolfordtw said:
i have evdo working.......hmmm.....do you all have the 10.key in the dmu folder on there?
Click to expand...
Click to collapse
You are missing the point. I have EVDO working fine too, but I want a way to TURN IT OFF. The purpose of wanting to turn off EVDO manually is to save battery for operating your phone in areas with low EVDO signal. It also prevents your phone from switching to an EVDO tower when you are using Airave, so you don't get dropped calls.
shahriar5252 said:
Does anyone know why the registry hack for enabling the Mode of Operations in Sprint's 1st generation Touch Pro (wm6.1 stock ROM) does not work for Sprint's Touch Pro2 (wm6.5 stock ROM)?
For Sprint's 1st generation Touch Pro, Mode of Operations menu can be enabled by going to registry\HKLM\SOFTWARE\OEM\PhoneSetting and changing the value of 'HiddenModeOperationPage' from 1 to 0. Then, in Comm Manager, you could click Menu, Phone Settings, Services Tab, and scroll down for "Mode of Operations". And you will see "Hybrid", "EVDO only", and "1X Only" as options that you can select. Others even made a mortscript-based toggle switch to toggle quickly between Hybrid and 1X Only modes.
I find the same registry key in Touch pro2 (wm6.5 stock ROM), but changing the value of 'HiddenModeOperationPage' from 1 to 0 still does not bring the mode of operations menu in the Phone settings/CDMA services tab. I checked the registery key to make sure the value was still 0, and it was. But I still cannot get mode of operations menu.
This is needed to save substantial amount of battery if you live or work in an area where EVDO signal is weak and your phone is constantly jumping between weak EVDO and better-signal 1X.
Also use of Sprint's Airave, which only provides 1X, can be enhanced by forcing 1X only mode because you don't want your phone to try to switch to a far away EVDO tower momentarily because of the weak EVDO signal in your place. That would result in dropped calls all the time because sometimes calls come through when you are momentarily connected to the far-away tower.
There are mortscript-based toggle switches that people have made for custom ROMs with wm6.5 (see post#2 here), but I need to get the mode of operations menu to show up in Touch Pro2 first.
I really need this, so if anyone knows how to get it working for Sprint's Touch Pro2, please let me know.
Click to expand...
Click to collapse
Same problem here but on a Verizon HTC Touch Pro2. Using the stock Verizon WM6.5.
In my case EVDO has excellent coverage but my university has old buildings (all brick, concrete, and steel) so as soon as I walk in the signal drops from 4-5 bars to 0-1 bars. This can kill 10% of my battery during a 1 hour class!
options
okay the idea i proposed doesnt need anything but a non evdo prl but since you wanna switch back and forth of a prl which uses epst and you have to reset the phone everytime you switch a prl file it is not the way to go for on the fly functions. but if you wanna try and keep the two different prls in a folder on the sd card goto corolada.com/prl and download a evdo prl and a non-evdo prl and give it a shot it wont damage any settings.
I remember on my touch pro we used to force evdo by hitting ##evdo# or something like that, and it would disable or renable.
explisiv said:
okay the idea i proposed doesnt need anything but a non evdo prl but since you wanna switch back and forth of a prl which uses epst and you have to reset the phone everytime you switch a prl file it is not the way to go for on the fly functions. but if you wanna try and keep the two different prls in a folder on the sd card goto corolada.com/prl and download a evdo prl and a non-evdo prl and give it a shot it wont damage any settings.
I remember on my touch pro we used to force evdo by hitting ##evdo# or something like that, and it would disable or renable.
Click to expand...
Click to collapse
So u r saying if I wanna stick to 1x, I just EPST my phone and load 1x prl (without changing other settings)? And vice versa with EVDO prl (without changing other settings)?
I have tested a beta program called WMLongLife made by chainfire on my CDMA Touch Pro2 (wm6.5 stock ROM for Sprint). It does have the capability of switching between EVDO and 1X for programs that you want to use EVDO. This app also has a menu for switch between EVDO and 1X manually and it does work, but not toggle switch that you can assign to a physical key.
However, the maker of the program has intends to make it a commercial product so after sometime this summer the program will disable itself. The program does take some RAM, and does have bugs on some devices although I found none so far on my device.
The point is that it is possible to use the registry or some dll file to switch between EVDO and 1X in Touch Pro2. Can anyone look at WMLongLife and find out how it is managing to switch between EVDO and 1X?
My work around for forcing EVDO will work for forcing any mode. It may not be a one button toggle but at least its not rebooting.
With value 4 being automatic and 10 being HDR only all options and numbers in between are easily applied. just plug in the value you need.
http://forum.xda-developers.com/showthread.php?p=6661529#post6661529
Try this. Have done it on my phone and it works. I got it from XDA or PPCGeeks. Who knows anymore.
tested it, and works great. Use a registry editor, and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\InitProv\PhoneSett ing
Change the ItemCount to 3
Add a String Value called "ItemName3" with the string being "Roaming Only"
Add a DWORD called "ItemValue3" with the DWORD Data being "5" (in Decimal)
Do not enter the quotation marks in the directions above. After exiting the program, wait a minute or 2 and then shut the phone off, wait a few seconds for good measure, and turn it on again. Or soft-reset by taking the back cover off (big hassle), or use the soft-reset program floating around.
You can get a free registry editor here:
sysmai said:
My work around for forcing EVDO will work for forcing any mode. It may not be a one button toggle but at least its not rebooting.
With value 4 being automatic and 10 being HDR only all options and numbers in between are easily applied. just plug in the value you need.
http://forum.xda-developers.com/showthread.php?p=6661529#post6661529
Click to expand...
Click to collapse
This is a great work around, but I am waiting for a kind savvy programmer to make an app that can toggle these registry values on my CDMA TP2. Thanks.
rush.perry said:
Try this. Have done it on my phone and it works. I got it from XDA or PPCGeeks. Who knows anymore.
tested it, and works great. Use a registry editor, and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\InitProv\PhoneSett ing
Change the ItemCount to 3
Add a String Value called "ItemName3" with the string being "Roaming Only"
Add a DWORD called "ItemValue3" with the DWORD Data being "5" (in Decimal)
Click to expand...
Click to collapse
This will enable the roam-only mode option in the phone settings menu. There are CAB that can do this for you or even apps that can give you easy menu to do it. Although roam only mode is over 1x only, it does not give you 1x only mode over your own carrier's network. And if you roam too much, your carrier can drop you. I need an easy way to toggle between 1X only and Hybrid modes.
shahriar5252 said:
I have tested a beta program called WMLongLife made by chainfire on my CDMA Touch Pro2 (wm6.5 stock ROM for Sprint). It does have the capability of switching between EVDO and 1X for programs that you want to use EVDO. This app also has a menu for switch between EVDO and 1X manually and it does work, but not toggle switch that you can assign to a physical key.
However, the maker of the program has intends to make it a commercial product so after sometime this summer the program will disable itself. The program does take some RAM, and does have bugs on some devices although I found none so far on my device.
The point is that it is possible to use the registry or some dll file to switch between EVDO and 1X in Touch Pro2. Can anyone look at WMLongLife and find out how it is managing to switch between EVDO and 1X?
Click to expand...
Click to collapse
shahriar5252 said:
This is a great work around, but I am waiting for a kind savvy programmer to make an app that can toggle these registry values on my CDMA TP2. Thanks
Click to expand...
Click to collapse
I posted a couple simple scripts more like batch files that toggle great once u get it in place
Good news everyone!
sysmai has created mortscript-based toggle switches that can do for TP2 what the mode of operations menu does in the original TP. Install his two CAB files to enable mortscript capability in your phone and to create a toggle switch for toggling on/off the airline mode.
Put all the toggle switches in your Start menu folder for conveniece, and if you want to give them distinct icons, use JWMDIconChanger_V2.7c program to do it. This program only works for wm6.5, and I am providing you with some .png icons I found online to use with this program. For some reason, my TP2 is not able to open these .png files but the JWMDIconChanger_v2.7c can open them and successfully make them icons in your start menu.
Instructions to change the mode of operation using sysmai's mortscripts:
1) First use the airline mode toggle switch to turn on airline mode.
2) Next, use the toggle switches to switch to your desired mode of operation (EVDO only, EVDO hybrid, and 1X only).
3) And finally, use the airline toggle switch to turn off the airline mode.
Note 1:
The Airline toggle that sysmai has created is not the same as your phone's own airline mode feature. sysmai's airline toggle just turns your phone on and off. It does not turn off other things like bluetooth, so if you go for airline trips, please use your own phone's airline mode feature.
Note 2:
sysmai has named the EVDO hybrid mode as "Automatic" and the 1X only mode as "CDMA only" because these are the terms used in the EPST menu for which you need your MSL code to access. For those that don't know what EPST menu is, ignore it. Just use sysmai's mortscripts on your CDMA TP2's and you should be fine.
Note 3:
As usual, use at your own risk. I used my icons, sysmai's apps, and JWMDIconChanger app on my Sprint TP2 running on the latest stock ROM (wm6.5 with HTC Sense 2.5.2012) without any problems, and all his programs were fully removable on my TP2.
What's the automatic do ?
is that the same as phone set originally ?
chao0105 said:
is that the same as phone set originally ?
Click to expand...
Click to collapse
No, the Automatic option in phone setting/CDMA Sevices tab/Roaming is to make the phone automatically switch between 1X/EVDO of a home network and 1X of a roaming partner. The automatic toggle switch in sysmai's zip automatically switches between the home network's 1X and EVDO signals, but it is has nothing to do with any roaming signal.
shahriar5252 said:
No, the Automatic option in phone setting/CDMA Sevices tab/Roaming is to make the phone automatically switch between 1X/EVDO of a home network and 1X of a roaming partner. The automatic toggle switch in sysmai's zip automatically switches between the home network's 1X and EVDO signals, but it is has nothing to do with any roaming signal.
Click to expand...
Click to collapse
I see, thanks a lot!
BTW, if I want to go back to phone's orignal setting, what should I do ?
chao0105 said:
BTW, if I want to go back to phone's orignal setting, what should I do ?
Click to expand...
Click to collapse
Just select Automatic (Hybrid mode) as described above.