Related
I want to flash my current radio rom (1.27.12.11) to 1.27.12.17. but if i open the EXE of the file i get the flash window. and if i click update. it shows me that my current image is version 1.56.404.6 and if i want to update it to 1.00.000.0 ... so whats up? is that normal?
and is this safe to do?
i have an unbranded HTC TyTN 2
Hi
That's normal. The version number relates to the whole ROM, but as you are only flashing the radio that question and version comparison is meaningless.
Just flash and you will see the radio rom version change to the new one and everything else remains the same.
Regards
Phil
its stuck at 0%... my AS connection dissapeared.. what now?
i managed to reboot it correctly, but my AS disconnects at the colour screen... why is that?
On this topic, I want to flash this new radio also, but I don't trust Vista, my Sync connection is always doing crazy things, its my vista that toast.
So can I Flash a Radio just using the SDcard method?
And how?
Thanks
Oh, btw, HI all, my First post, and 1 month with my Kaiser!
And a noob question, whats the difference from a TouchFlo rom to a non-Touchflo?...
Hi
i managed to reboot it correctly, but my AS disconnects at the colour screen... why is that
Click to expand...
Click to collapse
ActiveSync will disconnect at the coloured screen as it isn't ActiveSync in use at that point.
You also likely need HardSPL installed, if you haven't already please see the top threads in this forum for info as to how it all works.
Regards
Phil
Well im trying to install HardSPL. but when it comes to the tricoulour screen i have to unplug and plugin back my USB. AS disconnects as it should. and RUU starts. now it says make connection trough AS.... how? i cant get it to connect anymore and i need to reset my device in order to be connected again..
*edit* nevermind it worked. just ignore and go to update and click update
I had the exact same problem with Windows Vista. Tri-colour screen and Hardspl wouldn't continue.
Everything worked until the Unplug-replug part, and thats where is all stopped.
Had to soft reset device to get it back.
Still haven't figured it out.
Question to Seniors, if my Kaiser is "Free" or "Open", do I need hardSPL?
Or is HardSPL for getting around unsigned roms?
EDIT:
Ok did some reading, and understand HardSPL a bit better now...
One problem was the USB with thought a HUB, and not directly connected. Second problem was Vista not finding some driver, needed a reboot, Strang, ... anyway.
ITs on!!!
I think I got it Flashed on my Kaiser, but how do I KNOW, is there a way to check?
Edit: Figured this out too, My TriColour is now different, the USB was up top, its not lower and it says something about SPL by pof..
Hope you have more luck Imperium, I now have Radio .17 on my Kaiser.
Hi
Tried installing the HTC 6.1 Rom RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
on my TyTn II from Vista and XP but i still get the same Connection Error.
Can somebody help with this
Thanks
Need More Info
We need more info to properly troubleshoot...
Make of phone (TyTn II, Tilt, Vario III, etc)
If you are trying to use this rom on anything other than an unbranded HTC TyTn II, then it will not work unless you have used HardSPL to remove carrier branding first.
Check out http://forum.xda-developers.com/showthread.php?t=369282 for more info.
260 errors are usually related to USB port access. If you are using McCafee or Firewall software, you will have problems unless you disable or gifve full access.
Again, to quote NotATreo, more info will help, but consider temporarily disabling firewall or virus software.
Thanks guys
Its the HTC TyTn II and the rom im trying to flash is the 1 released by HTC so i assume its the other problem, yes iam running mcafee firewall, ill disable that and try flashing.
thanks a lot
pyk said:
Thanks guys
Its the HTC TyTn II and the rom im trying to flash is the 1 released by HTC so i assume its the other problem, yes iam running mcafee firewall, ill disable that and try flashing.
thanks a lot
Click to expand...
Click to collapse
I was able to flash while running the mcafee, but I still can't connect to the internet after flashing the Hard SPL and the radio
Have you try using SD card to flash?
just renamr file "RUU_signed.nbh" to "KAISIMG.nbh" and place the file in your Micro SD card.
Power on the phone and enter bootloader mode by press "power botton" + "camera botton" and using stylus to reset the device. It will auto start reflashing the ROM. It only takes 1min to 2min.
Tried the mcafee thing but then it gave me the Vendor ID Error
Basically there is no way around except for flashing the Hard SPL and removing the vendor thingy.
Not sure if i want to do that cause that will void the warrenty.
Tanks so much guys
Well, technically you are but they don't know it untill you make it noticable and there are ways to make it back to OEM.
pyk said:
Hi
Tried installing the HTC 6.1 Rom RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
on my TyTn II from Vista and XP but i still get the same Connection Error.
Can somebody help with this
Thanks
Click to expand...
Click to collapse
Just flash while you are in bootloader screen (tri-color)
Tried putting in bootloader mode and flashing but the same Vendor ID Error, dont have a choice but to Flash the Bootloader. Dont want to do that cause had a Problem with my previous Imate phone, the service center guys checked that 1st.
thanks
well... When I purchase a new phone, I never think about returning it unless DOA. When I flash my Tilt and iPhone, there is no turning point. Oh well, I change a new phone almost every year......Currently wait on my new N96
pyk said:
Tried putting in bootloader mode and flashing but the same Vendor ID Error, dont have a choice but to Flash the Bootloader. Dont want to do that cause had a Problem with my previous Imate phone, the service center guys checked that 1st.
thanks
Click to expand...
Click to collapse
well i had to do the same thing but i just used jump.spl. it worked great and now im runnin wwe 6.1.
ERROR 260
Guys,
I'm stuck with the same issue of ERROR 260 on my TYTN Phone. Not sure what went wrong, I tried HardSPL using Micro Sd but after going to loading screen it just got stuck & nothing happend. I had to reset again to bootloader screen.
Any suggestion guys? Please help
Regards
Sean
sean_kore said:
Guys,
I'm stuck with the same issue of ERROR 260 on my TYTN Phone. Not sure what went wrong, I tried HardSPL using Micro Sd but after going to loading screen it just got stuck & nothing happend. I had to reset again to bootloader screen.
Any suggestion guys? Please help
Regards
Sean
Click to expand...
Click to collapse
I would try plugging your cable into a different usb port and giving it another try- this has worked for me so far. Good luck
Dear All,
Please kindly help me out of this.
Yesterday, My phone started to develop the "NO GSM: symptoms. At first, the phone ioccasionally turned off after it couldn't connect to the 3G network. Today, after reading nearly all the post concerning this "No GSM" symptoms, I applied the Mtty tools to desparately try to bring my beloved Uni back to life.
I applied that mtty.. I tried to upgrade it by using the shipped rom.. yet it said country ID error.. I reverted to use the MaUpgradeUt_noID.exe but the radio rom upgrade failed....
Are there any other solutions I can rescue my uni? I read it here http://forum.xda-developers.com/showthread.php?t=350349 that Radio Rom upgrade may be done through a SD card but the ftp link is dead and I can't get any files from there.
I miss my Uni so so much that I think I would buy another one if there's no way to save it... Please kindly help. all my gratitude.
Hi,
Please consider a new battery.
As strange as it may sound, one of my MDA Pro's had similar symptoms with battery at 70%. Replacing the battery with a new one fixed it right away.
The symptoms were:
- less network signal
- random turning off of radio
- could not access phone settings
- radio crash when trying GPRS connection
Also, on my other MDA Pro, I had problems like this, but they were caused by radio ROM 1.18. I changed to 1.15 and everything is fine since.
It seems that aging batteries are a major problem for weird issues. Just buy a new one at ebay and dont start flashing as a fool, cause you can risk a brick.
Cheers,
vma
My battery is actually new... just bought it 2 weeks ago.. and I tried the phone with both my new and old batt. still no luck -_-
I can't flash any radio rom now... is my Uni certified dead?
Any help would be great.. thanks
Try charging the battery first in another universal if possible, if battery is ok, put it in and try again, read Wiki and check if you can go to boot loader mode, check whether pc recognising the Uni once on etc.,
Read everything and the computer recognised my Uni ... tried MTTY tools to reset all the DOC partition in my Uni yet no way to reflash my radio rom again
I think as long as PC is recognising, dont consider it as DEAD. Its very much alive and keep hopes.
as I read through this forum, Radio ROM flashing is the most risky thing and often takes longer.
If you are not already considering, try only flashing radio rom and do not club with extrom etc, try redownloading the ROM or try a different version from a different link, unless you are particular about the one you are trying.
Always use the original USB cable supplied with the Uni.
Enter BootLoader mode by pressing and holding the power button and backlight button whilst performing a reset with the stylus. Connect Unit to PC to the USB port directly and not through a USB HUB.
Start flash again..
All the best
ronaldphl said:
Dear All,
Please kindly help me out of this.
Yesterday, My phone started to develop the "NO GSM: symptoms. At first, the phone ioccasionally turned off after it couldn't connect to the 3G network. Today, after reading nearly all the post concerning this "No GSM" symptoms, I applied the Mtty tools to desparately try to bring my beloved Uni back to life.
I applied that mtty.. I tried to upgrade it by using the shipped rom.. yet it said country ID error.. I reverted to use the MaUpgradeUt_noID.exe but the radio rom upgrade failed....
Are there any other solutions I can rescue my uni? I read it here http://forum.xda-developers.com/showthread.php?t=350349 that Radio Rom upgrade may be done through a SD card but the ftp link is dead and I can't get any files from there.
I miss my Uni so so much that I think I would buy another one if there's no way to save it... Please kindly help. all my gratitude.
Click to expand...
Click to collapse
From the problem behavior it seems your device got GSM locked, I'm afraid it's permanent. But at least try ...
1. Remove the SIM card
2. Must upgrade the bootloaded to 1.01 if it's a G3 (and not upgraded already).
3. Run the Buzz's CID unlocker tool and flash the radio (version 0.00) provided with the tool.
4. Do the HR and check the status
Hi All,
I have been searching and not able to find a solution that works with the problem i am having upgrading my rom.
I was trying to upgrade to either or L26_KaiserTouch_V1M2D.rar or L26KDV12_Full.rar
roms, and after unpacking, running the utilities i keep hitting the same wall.
I have two pcs i have tried on, a laptop and a desktop both running xp.
Uninstalled active sync reinstalled etc etc
even tried the hard spl after using MTTY to try and solve the problem.
I still get error 262, even with hard spl which runs a different rom update.
tried different usb ports, unplugged most devices to the basics, restarts etc make no change to it.
Then i tried a fat32 micro sd card with the rom named as KAISIMG.nbh
and after using MTTY as listed by Laurentius26, it will show loading but not just sits there for more than 10 mins!
Hopefully someone can come up with a solution or has had the same probs.
As you could probably imagine i have a moderate grasp of this kinda stuff but i think its now beggining to drive me crazy!
Cheers,
Nathan
Narf_911
narf said:
Hi All,
I have been searching and not able to find a solution that works with the problem i am having upgrading my rom.
I was trying to upgrade to either or L26_KaiserTouch_V1M2D.rar or L26KDV12_Full.rar
roms, and after unpacking, running the utilities i keep hitting the same wall.
I have two pcs i have tried on, a laptop and a desktop both running xp.
Uninstalled active sync reinstalled etc etc
even tried the hard spl after using MTTY to try and solve the problem.
I still get error 262, even with hard spl which runs a different rom update.
tried different usb ports, unplugged most devices to the basics, restarts etc make no change to it.
Then i tried a fat32 micro sd card with the rom named as KAISIMG.nbh
and after using MTTY as listed by Laurentius26, it will show loading but not just sits there for more than 10 mins!
Hopefully someone can come up with a solution or has had the same probs.
As you could probably imagine i have a moderate grasp of this kinda stuff but i think its now beggining to drive me crazy!
Cheers,
Nathan
Narf_911
Click to expand...
Click to collapse
you have already Hspl 3.29 from here:
http://forum.xda-developers.com/showthread.php?t=396922
also if you don't have WWE phone.. (English language)
you must unlock your phone with this steps:
http://forum.xda-developers.com/showthread.php?t=361236
and on activesync settings you must check usb connecting..
try the usb from your mouse to see if working...
good luck
also try AthineOS Manila Edition Rom hehehehe
http://forum.xda-developers.com/showthread.php?t=435345
Had a go at putting on Hardspl 3.56 also 3.29. even the forced Usb versions.
I can update to any standard Kaiser/Tytn2 Rom but any of these other cooked roms seem to give me grief.
I even thought perhaps i could run the other original rom update, so i did that and copied the different Nbh files in and renamed to what the original rom was but it still wouldn't allow me to get to where i wanted to get.
Is there any special way i can get Hardspl onto my device?
Can i copy it to the sd card and load it thru a bootloader?
This error 262 is driving me nuts!
I spent well over 4 hours of constant messing about and testing any possible solutions.
plus a further 2 today!
This is my last resort!
I'll be more than happy to donate to these rom developers once i get one working.
Even attempted the manilla AthineOS without luck.
I keep reading about the JumpSPL and SSPL, is anyone able to explain or link to where i can get it for the Kaiser ?
OR is it the same thru the whole series ?
Any assistance is greatly appreciated.
There is SOOO much to learn!
The more you know the more you realise you dont know!!
Use jump spl first, I reccomend 1.56, then install your spl of choice, I personally use 3.56
Place jump spl on your phone and run it from the phone, keeping your usb cord attached, you will get a tri colored screen. Now in active sync comm settings uncheck allow usb commections. unplug the usb cord wait 30 seconds and plug it back in. then from your pc open the folder hard spl and run kaiserRUU and after its done go back to active sync allow usb connections and flash your ass off.
Woo Hoo!!
Finally i got it working, I was beggining to think perhaps there was something stupidly wrong with my pc or the Tytn!
Thank you very much for your reply KD8DNS, Also thanks to b16b After so many hours of mucking round i've finally got it sorted!
Now running Kaiser Diamond V12, it works very well.
Will be looking to change to many other roms in the near future!
Cheers,
Nathan
"Narf!"
I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
darkreborn said:
I am in deep trouble here and could really use some help please. My ATT Fuze is not being detected by any PC and i have tried everything from different wires to changing everything on the fuze it self. Now my only option is to exchange it but i don't have the original OS because i am using NRGs Rom and hard SPL it about 4 months ago. Now to my question, is there anyway i can revert it to stock ROM and SPL with micro sdhc card? I need some steps please because i cant find a way to do it. Would i have to change the OS and the SPL to return if there is anyway please let me know.
Click to expand...
Click to collapse
First, what OS are you running on your PC.
Second, have you disabled/Enabled "enable faster data" in Settings/Connections/USB to PC?
Third, Have you deleted the partnership and tried to reestablish it?
Doesn't seem to be a warranty issue.
Fuze Reply
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
darkreborn said:
First of all thanks for your reply.
I have tried it on 4 different computer but unfortunately same result on vista and XP, on my phone i am using NRG july version rom.
I have disabled and enabled faster data in but doesn't seem to matter.
I tried everything, i reinstalled windows mobile device but doesn't seem to matter. When i ended the partnership it wasnt being detected after it or before it.
Cant i exchange it because its a faulty phone? Also can u please tell me if i can revert it to att stock rom and spl with a micro sdcard because i am going to buy a card reader. I really don't want to toss this phone and waste all that money please help!
Click to expand...
Click to collapse
Yes, you can revert via SD card.
Do Radio and ROM first, then do stock SPL last.
Rename each RAPHIMG.NBH (one at a time) on a FAT32 formated card 2gb or smaller.
Go into bootloader mode and it should flash from there.
I would test your USB connection after you flash back to stock ROM before you flash the stock SPL to see if it may have fixed your issue.
Huh
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
darkreborn said:
Thanks a lot man!
Now the hard part , why do u say a card 2gb or smaller?
So i can revort the SPL with a micro sdhc card also? can u tell me where i can find this stuff, i am really sorry for the trouble and would really appreciate it if you can tell me step by step because i am a noob
Hopefully ATT exchange it for the usb issues , gotta check with them after this. Thanks
Click to expand...
Click to collapse
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Start here for issues encountered.
Basically once you find your ROM Radio and SPL, extract the files so you can see the .NBH files for each.
1. Take the ROM file and rename it "RAPHIMG.nbh " without quotes.
2. Place it in the root of your storage card and enter bootloader mode (Volume Down + Reset), the phone will read the image file and begin to load it.
Do this for each file but wait until the first file has loaded.
Radio.nbh will be renamed to RAPHIMG.nbh
SPL.nbh will be renamed RAPHIMG.nbh
As one is done loading, remove it from starage card and put the next one on and repeat step 2.
Another thread regarding SPL.
I hope this helps you and sorry I don't have the time to walk you through it.
Just read first then you'll know what to expect.
Bruce Inman said:
I've heard that anything over 2 gb will cause an issue but I have done it from an 8gb card.
Click to expand...
Click to collapse
my best guess is just in case the bootloader doesn't have drivers for SDHC cards... my x51v has drivers for SDHC in WM, but flashing requires SD cards because the bootloader doesn't read SDHC
revert SPL or no?
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
darkreborn said:
Hey thanks bruce!
One more question, should i revert the SPL even tho i changed the radio and os. When i go to ROM version it says 1.95 but is that the SPL? Also you think ATT will take the phone back with the phone not syncing reason or do i have to make up some other stuff up? O btw the 8gb kingston card worked fine for reverting it and it still doesnt detect the phone
Click to expand...
Click to collapse
To be safe I would revert the SPL as well.
The 1.95 is the ROM build base.
You want to revert back to stock SPL 1.90.
I can't second guess what AT&T will cover or not but you may want to "further your cause"....
Best of luck!!!
in my experience (my UK t-mob vario is back at repair right now) - DONT revert the SPL if you cant do it from the USB.
Obvisously you have a different setup to me, but when i tried to revert my phone to stock for exactly the same fault (no usb sync, regardless of pc or cable / phone rom, state etc etc) i managed to get the phone to refuse to boot due to a spl / rom difference. As i couldnt load from usb - i couldnt flash anything new, and as i had managed to overwrite hard spl - i couldnt flash what i wanted from the SD card! (if i could get the usb to work, i could fix it all - but as that was the problem i had to send it off fubar)
For some reason (god knows why!) it appears that t-mob are repairing my phone under warrenty despite the spl error but i wouldnt advise getting yourself in the same situation, as i was 100% expecting it to come straight back to me!
My personal advice is send it off with the correct rom, radio & splash screens (and remove security unlock if required) so the phone looks stock - the only difference will be the spl version. They probably wont notice!
1.90 or 1.95
Thx for the info guys, my new phone is coming and it took me about 2 to finally on its way. About the SPL, mine says 1.90 and that was when i first did the hard spl to change roms. What is the stock SPL 1.90 or 1.95? at loading it hows me 1.90 olinex i think...also i can change it if needed with my 8gb sdhc card or no?
I had a problem with my PC not detecting my fuze a few weeks ago. I found out it was my new firewall blocking the connection. I disabled the firewall and it worked like normal.
If it were me i would try to connect again after you flash the stock rom. If there was something wrong with the usb it still wont work. If it connects to activesync the maybe it was your ROM, or something else.
Just a suggestion