I got a XV6700 off of ebay,
worked pretty well for a few months. Eventually the keyboard went bad. The presses felt weird and some of the keys stopped working. Took it apart and I can tell there is no way to remove the keyboard without destroying it. UTStarcomm's support is pretty crappy. Sounds like a hand full of people in a small office in NY city. I called a few times and got the same two ladies. Was hoping they'd forward me to a real tech that could sell me the part for the keyboard.
Is there even a snowball chance in h e double hockey sticks that I can get a replacement keyboard? Going to just ebay it for parts if I can't.
Really your best bet is to look for a 6700 with a cracked screen and salvage it for your keyboard. Or just get use to using the on-screen keyboard. There is some s/w out there that the makes on-screen keyboard look better and easer to use.
I recently took apart my AT&T Tilt, actually, I took it apart about six times! (So, if anyone wants help and advice I can surely tell you how to do it).
The keyboard, certain keys have stopped working. The problem is some keys require firm presses started before I pulled the phone apart, but finally in the last pull apart, some keys stopped working altogether. I guess I just exacerbated or accelerated the deterioration of the keyboard.
I ripped out the keyboard (the qwerty keyboard, not the keypad on the front of the phone). The housing remains attached. After I did this, I read on xda that this is not what should have been done, because the keyboard itself is not the issue. I can verify this, because I now have the circuitry, for want of an apt description, lying underneath the keyboard exposed. When I depress those circuitry corresponding to the faulty letters on the keyboard that don't work, surprise, it doesn't work either, even though those circuits, respond in feedback as if I was depressing the keyboard. (I am wondering if ripping out the keyboard was a wise choice....................).
Prior to ripping out the keyboard, I pulled the phone apart and re-attached the keyboard membrane to the motherboard, so yes, I at least followed that procedure.
My conclusion is that I need a new keyboard with housing.
First question, would anyone concur with this conclusion? If not what could it be?
I am not having any luck finding just a keyboard with housing without having to pay astronomical amounts, i.e. prices allowing me to justify buying an iPhone! I have seen parts for sale in the xda marketplace. I have found a replacement keyboard and housing for a TyTnII/ Kaiser (from here https://www.gsm4world.us/htc-tytn-ii-p4550-oem-keyboard-w-flex-d-01433_297.html) , which I know has a different keyboard layout than the Tilt. However, this unit is for sale at a very competitive price and I am tempted to buy it.
Here's the challenge. I have a standard AT&T ROM. If I buy this keyboard, how do I get the keys to map correctly? I know that when I depress certain keys on this keyboard, it will respond as if it were an AT&T keyboard. If there is a keyboard driver I can load onto my Tilt that would be ideal. (I don't want to flash an entire ROM for the phone).
If anyone is aware of alternatives, such as a cheaper supply of AT&T Tilt keyboard with housing, or how to stick on a new keyboard and fix the non responding keys, I would be all ears. I have spent too many hours on this already, enough to justify buying a new phone outright!
Thanks all.
I changed my keyboard and I have orginal one I can trade my old one for reasonable price
Zombie.raised,
Can you confirm the keyboard is from an AT&T Tilt. If so, does it work? Do all the keys work?
Are there better onscreen keyboards for the vzw tp2? The keys are too small and I have a lot of typos since they're too close together. I have a perfect time on my ipod touch and would like to somehow change the onscreen keyboard on the tp2 so the keys are bigger or something.
Also it doesn't auto correct spelling either when typing messages, emails etc. If anything all it does is capitalize the first letter of the first word in aqnew sentence and that's it. Is there a way to make it work like on the ipod? That is perfect.
Thanks.
1: rotate phone 90 degrees counter-clockwise
2ush upward with thumbs
3. Tada! Best mobile keyboard.
buggs1a said:
Is there a way to make it work like on the ipod? That is perfect.
Thanks.
Click to expand...
Click to collapse
Buy an iPhone?
Or as football0552 pointed it out, just slide the keyboard out. On-screen keyboard is meant for only replying "OK" to a friend =D
hardware keyboard too small.
iphone sucks. apple sucks.
onscreen keyboard is not meant for only ok. it is meant for all typing. hardware keyboard for me is even worse then the onscreen one.
buggs1a said:
hardware keyboard too small.
iphone sucks. apple sucks.
onscreen keyboard is not meant for only ok. it is meant for all typing. hardware keyboard for me is even worse then the onscreen one.
Click to expand...
Click to collapse
Too Small??? Oo
Well, try some other keyboards, there are some lying around here somewhere, search for resco keyboard and finger keyboard
buggs1a said:
hardware keyboard too small.
iphone sucks. apple sucks.
onscreen keyboard is not meant for only ok. it is meant for all typing. hardware keyboard for me is even worse then the onscreen one.
Click to expand...
Click to collapse
Apple sux??? and you have a Ipod Touch? And Hardware Keyboard is too small?? Are you serious, this keyboard is gigantic compared to any other slideout KB out there. Just search for other KB out there, I havent found a WVGA one yet. I use the Compact Qwerty KB that is on Mightey Mikes new rom. I think its the best for texting if you dont feel like whipping out the KB bro.
buggs1a said:
hardware keyboard too small.
Click to expand...
Click to collapse
Really?? I thought it is the best. Definitely the best hardware keyboard for a phone...but anyway I have used SBP Keyboard. It works pretty good and you can download different skins that have different layouts and bigger and smaller keys so you can kind of customize it to your liking.
Here is the cab for the keyboard: http://www.megaupload.com/?d=ODHE7PK9
I just hate it when someone asks for help and then people go suggesting other stuff. eg iphone.
Thanks for the suggestion for the sbp. I still think its keys are way too small. Look how skinny they are. Way smaller then my thumbs.
The hardware keyboard on the tp2 is yes, the best I have seen, but still too close together by far. You look at yer thumb and how wide it is and I need a bigger onscreen keyboard.
The sbp I tried and I think it is slightly better then the default onscreen keyboard. Only thing is it doesn't stick to that when I reboot the phone etc. At least mine went back to the default.
That may be. I mostly used it on my touch pro and it stayed as the default on that one. I haven't used it a lot on my TP2
I assume you've had your device for a while now. They all take getting used to, so my only suggestion would be to practice a bit more with both keyboards. I came from using Treos (no problem using a keyboard that size for me when I had them). I am by no means small of hand: the top joint of my thumb covers 15 of the physical keys at a time, and I have zero problems selecting individual keys. The virtual keyboard, while not the easiest to use, is one I still can use with very few mistakes, actually better than I expected.
Sorry to not have a solution to your exact question, merely a suggestion, but I hope you stick with it. This is too good a device to give up on IMO.
Afterthought question: what were you using previously that had bigger keys than this?
i have ipod touch 2g and love the onscreen keyboard. maybe its better not only from size but it is capacitive on glass solid screen? could the screen be the difference? i just have to type very slow with tp2 hardware kbrd and onscreen. im not giving up on my tp2. what makes this such a wonderful phone anyway? i just wish the onscreen kbrd keys were wider. but my thumbs maybe dont slip to next key on ipod cus its capacitive. i dunno.
are you typing with the ends of your thumbs or the actual pads? I have noticed that Cap screens are pretty lenient in allowing you to use big blunt things like the pads of your thumbs whereas resistive screens are somewhat more picky so using the ends of your thumbs, fingers, nails are better off used in this case. Same would go for physical keyboards of smaller size.
I would strongly suggest using the fingernail to type on the screen. A solid tap right over top of the intended key then moving on to the next letter lets me type very fast on the screen. Possibly faster than the physical keyboard (but only for shorter messages/search phrases). Just tap with your index fingernail and trust that the screen picked it up. that's what i do
I don't use the very tip of my thumbs or fingers but just below that with fingers or the middle/fatter part on the thumb because of how you hold the phone. But even if I use closer to the tip that doesn't help much on tp2.
I really have towonder if a big thing here is capacitive iPod touch (glass?) vs tp2 resistive. My fingers thumbs don't seem to slip as much on iPod but maybe that's cus iPod keys are a bit wider which of course they are I think.
The hardware keyboard on the tp2 I use the tip of fingers/thumbs a bit more for sure. They're way to clse and flat otherwise when using the fatter middle part of my thumbs.
buggs1a said:
I just hate it when someone asks for help and then people go suggesting other stuff. eg iphone.
Thanks for the suggestion for the sbp. I still think its keys are way too small. Look how skinny they are. Way smaller then my thumbs.
The hardware keyboard on the tp2 is yes, the best I have seen, but still too close together by far. You look at yer thumb and how wide it is and I need a bigger onscreen keyboard.
The sbp I tried and I think it is slightly better then the default onscreen keyboard. Only thing is it doesn't stick to that when I reboot the phone etc. At least mine went back to the default.
Click to expand...
Click to collapse
buggs1a said:
I don't use the very tip of my thumbs or fingers but just below that with fingers or the middle/fatter part on the thumb because of how you hold the phone. But even if I use closer to the tip that doesn't help much on tp2.
I really have towonder if a big thing here is capacitive iPod touch (glass?) vs tp2 resistive. My fingers thumbs don't seem to slip as much on iPod but maybe that's cus iPod keys are a bit wider which of course they are I think.
The hardware keyboard on the tp2 I use the tip of fingers/thumbs a bit more for sure. They're way to clse and flat otherwise when using the fatter middle part of my thumbs.
Click to expand...
Click to collapse
I've got pretty big hands and an iPod Touch 32GB (1G) and I have a harder time with the iPod's keyboard vs. the TP2.
I use the TP2's 'full qwerty' on-screen keyboard for texting and the hardware keyboard for emails.. I find it easier to format emails with the hardware keyboard.
Anyway, my suggestion is to use that little nub in the middle of your thumb and teach yourself to type over a few day period.. that's what I did and it only took me a few days to follow the learning curve from my Storm 1 (now THAT'S a HUGE difference)
-mak
Maybe what I'm seeing is iPod is glass and the tp2 is plastic. Much easier to use the iPod onscreen then tp2 for me. With tp2 I think what happens is I slip to the next letter and i have to manually correct it. I get auto correction on iPod but my fingers/thumbs don't slip to the next letters. The hardness of my iPod screen feels so much better then the tp2 screen.
Is what I'm talking about capacitive vs resistive? Is it the iPod glass screen/hardness vs the tp2 softer screen?
And does anyone know how to get the tp2 to auto correct like iPod does?
Perhaps what we really need to know is what all the typing is for? Are these just little SMS messages or are you doing a lot of work on your phone?
The only way you're going to get physically bigger is by going to a full size (more r less) Bluetooth keyboard. Actually quite nice if you are doing a considerable amount of work on your phone. Maybe not so hot if you are only looking for a solution to tap out some SMS messages once in a while.
You can only make each key so big and still fit them all on a certain size screen. Does your iPud have a larger screen? You can look for other software keyboards, but the keys can only get so big & keep them all on screen.
A resistive screen needs to receive pressure. A capacitive screen only needs to register the electrostatic ground you provide. And yes, a capacitive screen is more like glass if not actually made of glass. Perhaps the capacitive screen of your iPud works better for you and the properties of the resistive screen just don't get along with your fingers. There are just now WM phones coming out with capacitive screens, HTC HD2 for instance.
These two are simply things that can't be changed with this phone. They are physical properties. If these are the problems, you need to look at other phones.
If you want the software to do others things like auto-correction, you need to look at other software keyboards.
Wikipedia & internet searching are your friends.
p.s. Please look up the proper usage of the words "then" and "than".
... How is this CMDA specific again?
Hello,
I recently bough a keyboard from ebay with full housing because my keyboard was failing (3 keys) and sincerely the housing was terrible.
Well the problem is that just few keys are working! i though that the keyboard was the problem and i asked for a different one. And is failing too!!! several keys fails with both "new" keyboards.
I'm using android.
Any help here?
I have been waiting for a super phone with a physical keyboard , but it doesn't look like anyone is going to make one. Next best thing would be a thin slider keyboard case for the S4. A low power NFC based, 5 row keyboard that slides behind and/or folds over to protect the display would be great. All searches I have done seem to bring up a thick 4 row S3 case.Has anyone found any promising keyboards to be released for the S4?
levi47 said:
I have been waiting for a super phone with a physical keyboard , but it doesn't look like anyone is going to make one. Next best thing would be a thin slider keyboard case for the S4. A low power NFC based, 5 row keyboard that slides behind and/or folds over to protect the display would be great. All searches I have done seem to bring up a thick 4 row S3 case.Has anyone found any promising keyboards to be released for the S4?
Click to expand...
Click to collapse
This is what I am after too. Nothing yet. I have heard that ele-boat.com is making two versions - one that is magnetic and another that is the more traditional case we're used to. I have seen pictures, but I have not been able to try it. They say the magnetic version is thinner, as you'd expect, but it would not be my preferred type, I think. Oh, and it's not NFC. It's bluetooth.
levi47 said:
I have been waiting for a super phone with a physical keyboard , but it doesn't look like anyone is going to make one. Next best thing would be a thin slider keyboard case for the S4. A low power NFC based, 5 row keyboard that slides behind and/or folds over to protect the display would be great. All searches I have done seem to bring up a thick 4 row S3 case.Has anyone found any promising keyboards to be released for the S4?
Click to expand...
Click to collapse
I'm looking for the same thing. All I can find are Bluetooth 4-row slide-out keyboards on newegg's website. Did you have any luck with this?
levi47 said:
I have been waiting for a super phone with a physical keyboard , but it doesn't look like anyone is going to make one. Next best thing would be a thin slider keyboard case for the S4. A low power NFC based, 5 row keyboard that slides behind and/or folds over to protect the display would be great. All searches I have done seem to bring up a thick 4 row S3 case.Has anyone found any promising keyboards to be released for the S4?
Click to expand...
Click to collapse
How about ANYTHING with a 5 row keyboard? Thick, Bluetooth, high power usage? My Droid 3 screen cracked and I just couldn't bring myself to replace it with the Droid 4. Costco had a deal on the S4, I went for it, but I know I will miss the physical keyboard.....
Thanks,
Chad
5 row qwerty
Help me campaign on twitter and get the word out to all manufacturers and providers that we want an up to date top of the line phone with a physical 5 row qwerty phone. #fullqwerty and also Please join this campaign: htt p://chn. ge/1jQ4VM. spread the word
There is one 5 row bluetooth qwerty keyboard case for iPhone 5/5s. Maybe you can mod it to Galaxy S4 like I modded iPhone 6 keyboard case to Xiaomi Mi4C: Qwerty Keyboard Slider [DIY]