Hi, can someone help ? I've tried a bluetooth headset Jabra 250 and also a Sony HBH-35 with a I-mate.
I can get them to bond and also identify as default headset but I can't transfer a incoming or outgoing call to the headset.
I've also done several soft resets and no improvement.
Any ideas ? do I need a new upgrade or something.
Other than this small problem, I'm very happy. I have also success with the Sandisk wifi SD card.
Thanks for any tips, Dave
how are you bonding the headsets?
on my hbh-60 I have to hold the button in for a few seconds
on first powerup to get it into discoverable mode(red/green LED flash)
Then search for it with the XDA/MDA/iMate
I have had no issues with bonding.
What version iMate are you running?
G
Hi,
I'm not sure what information about versions is needed to help resolve this problem but:
ROM version 1.03.00 USA
ROM date 09/24/03
Radio version 1.05.12
Protocol version 1337.12
ExtROM version 1.03.20
When these are not up-to-date where do I get the current ones from ?
Thanks, Dave
Have you turn on the bluetooth headset mode (one item on the default today screen, not the bottom right icon)
I have been using the Jabra bt200 for a while now. The problem is, everytime you turn bt200 off, you have to rebond again. It also works a bit differently. Once bonded, it automatically transfers to headset on dialout. For received calls, you still have to use the headset button. I am looking for another headset that won't require constant rebonding.
Hi, thanks again for the tips.
NOW the HBH headset works. I put the "profile" option back in the Today display and then checked everything again.
Then I tapped on the headset profile on the today screen - this turned it off. Then, I tapped again to turn it on.
Now the headset works fine !
I'll try again later with the Jabra.
Thanks - Dave
Thanks Much !!!
Just wanted to thank this forum and this thread. I just got a HBH-65 yesterday and could get it to bond ok, but it still wouldn't work. It turned out to be not having the "Profile" shown on my Today screen. I placed it back on the Today screen and enabled it and it works great now.
THANKS MUCH GUYS !!!
My PDA2K had the same problems as everyone else did the bluetooth error kept turning up and asking for a soft rest.
Bluetooth activesync and TomTom worked fine the the headset was crap it did sort of work but not as it should.
I did the upgrade rom from the Imate site, But now the Activesync and TomTom work as befor, but the headset (jabra 250 and 250v) pair ok but fail at the end of the set up proces.
Dose anyone know a way to fix this
Thanks
John
Am i the only one with this problem? or after rom upgrade dose everyones PDA2k work fine with no Bluetooth problems, and the headset working properley
Thanks John
aside from the annoying constant connection, I've got it paired to a sony HB-35 and working with no major problems.
As for annoying, what happens is that the phone establishes a bluetooth connection to my HB-35 but never releases it unless I disconnect or power the HB-35 off. Other than that, when it is connected, it seems to work ok... have not used it all that much since i use the PDA2k to play my mp3's.. so I've been using the corded headset.. Tend to use the bluetooth only when I need it for gps navigation .
Hi all,
Laurentius and I are looking at resolving the current issues with A2DP (Many fixes will be in our latest rom, however issues vary from headset to headset.
Some work fine, others are poor quality and some receive PDA lockups or long pauses between streams.
Please could those with A2DP issues, and the need for this protocol to work properly, post the following information.
The current Rom you are you using
The make and Model of your headset
A list of issues you are currently having with A2DP.
Please also try the following to resolve the issue.......
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
Remove (Delete the following entries)
BitPool
MaxBitpool
and add the following
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway]
"Capability"=dword:0000003C
[HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\A2DP\Settings]
"SampleRate"=dword:0000BB80
"UseJointStereo"=dword:00000001
Please then remove (un-pair) your headset and Soft Reset
After SR please re-pair Headset and test A2DP again.
Please keep this thread clean and only post A2DP issues with the required information listed above.
Thanks,
Cheers,
Beast
Hi Beast,
Isn't:
"UseJointStereo"=dword:00000000
to get proper stereo sounnd?
Regards,
KOR!
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
jarekt said:
I have latest V1 rom from Lt.Cmdr.Ivan - BT headset is Philips SHB7102 (works great with my Wizard and SEk800i). I did exacetely what U have asked for (but i have left jointstereo=0) and nothing happend. It sounds like 2s of music folowed by 15s of silence, then again 2s of music and 15s of silence. I messed with bitpool walues and couldn't find any working set. I'm afraid that's something wrong with max BT speed and not with A2DP implementation. I had BT speed switch app when I used broadcom BT stack and A2DP works great. Unfotunatelly normal mono BT headset doesnt work at all with this BT stack so I'm back to original stack
Click to expand...
Click to collapse
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
gewin said:
I also have Ivan's V1 Rom and have an Itech Radio headset. I completed the changes that you suggested and found that A2DP works well it did before the changes too. I have noticed that the sound quality may be a little better and the pauses are slightly reduced.
The main problem I have found with A2DP with all AKU0.5 ROMS is the pairing of the headset. If you soft reset you phone while the headset is on, A2DP will be auto detected when the phone comes up. If you play music then the music starts and stops and the phone becomes unstable. The work around is to turn your headset off, soft reset the phone. When the phone comes up turn the headset on and activate A2dp by pressing the button on the phone. Music then plays fine.
The registry changes you suggested did not help the above problem. AKU0.5 ROMS all seem to have this A2DP autodetect error on reset at least with my headset. Very frustrating.
Click to expand...
Click to collapse
Sorry I meant to say " When the phone comes up turn the headset on and activate A2DP by pressing the button on the HEADSET."
mamiware said:
I've found that with MS stack and my Jabra BT620s the best bitpool is 33... good quality and good range (no interruptions)... jointstereo must be 1 otherwise the sound uses too bandwidth...
Click to expand...
Click to collapse
Hi Maniware,
Can you please further shed light in detail on the jointstereo?
Why jointstereo to be 1 or 0?
Thanks in advance!
KOR!
It goes well with joint stereo. Seems that it needs much less bandwidth. I've heard that jointstero=1 means that there is mono sound in effect.
"UseJointStereo"=dword:00000001 << mono
"UseJointStereo"=dword:00000002 << joint stereo
"UseJointStereo"=dword:00000000 << stereo
AFAIK
qtek 9000 - Logitech Mobile Bluetooth Headset
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
my feedback:
device:
itech r35
Problems:
sound muted after 2 seconds of music.
audio players used:
audio manager
windows media player
i tried your advices, but not worked for me....
Sometimes it works when i put 70 (binary) on both Maxbitpool and bitpool...but on next device activation or reboot it just stop working...
A2DP and wireless
Just to be clear, my results are when I do not have wlan activated.
I changed UseJointStereo=dword:00000000.
Quality is good and it is definitely stereo.
Still have the auto detect problem. Interesting though, if I walk out of range for a while with the headset on, when I come back into range the A2dp is autodetect and the music starts playing through the headset again, quality is good. If I soft reset with the headset on and A2DP is autodetected, the headset is unusable.
If you do any of this with wlan on the quality is very poor with starts and stops.
Also noticed that audio manager does a better job with bluetooth than gsplayer, I think audio manager may have better caching.
Freezing
I think there's a problem with the latest core os files (AKU 0.7.0)... i havent' tried the MS BT stack, but with the Widcomm, using the bluetooth for anything more than 1 min, completely freezes the phone.
It does when listening music, transferring files, etc... if BT is idle, nothing happens (except than freezing the device when the Comm Manager gets confused and enables BT instead of gsm radio).
So it seems related to the core files.
Switching on and off, transferring data thru BT is a critical task and subject to lockups.
For the record, i used to use the BT A2DP and file transfer without ANY problem whatsoever in my old and horribly-underpowered HTC Tornado (omap850 @195mhz) so IT MUST WORK!
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Hi,
Now that sucks,
I have the same headset HT820 and audio sucks, long pauses etc etc.
Can you post your firmware Revision for me please, it should be printed on the inside of the headband.
Cheers,
Beast
Haha.. can you help my friend Beasty please
He's so happy with his new headset.
rofl......
Cheers,
Leo
@Beast J.K.
rnzk8 said:
im using your latest rom and Motorola HT820 does not have a problem with it... even in the earlier roms you cooked... even tried it in indra's xoj version and darkforce's rom..
just wanted to clear it out just so you can rule something out...
Click to expand...
Click to collapse
Plantronics Pulsar 260
Sound stops coming fter about 1 second of playback (used TCPM,
Audio Manager)
The same result after applying those reg mods....
Please try and install the stack found here: http://forum.xda-developers.com/showthread.php?t=291639
A2DP problems should go away, but then will come the freeze-after-1-min problems, like with my HP Stereo bluetooth headset
I've flash to your latest WM6 AKU 0.7 (WIFI Fix update 3) ROM just now. But sadly to say, the freezing thing still occurs after playing music with Audio Manager. It even freezes when watching videos using WMP. Usually around 1 minute it shall start freezing. FYI:
Bluetooth model: i-tech Clip
AnnaD said:
I'm not quite sure if my problem is right here - because i still have the original (last build) WM5 ROM (130.96 GER, Radio 1.09.00, ExtROM 1.30.185 GER).
I encounter statics while using the Logitech bluetooth headset, which is a mono one, making phone calls impossible due to stressed phone partners ... Only the person on the other end of the line encounters interruptions, me, as calling, not.
This is the main issue for me to update the ROM, and I'm trying to find out if any of your nice new ROMs will be of help.
Anyway, I haven't tried yet I'm afraid to destroy my device ...
thanx
Anna
Click to expand...
Click to collapse
I had the Qtek 9000 with italian version WM5 and i flashed WM6 with no problems. if you dont wanna have any problems unzip the attached file and add in the folder the 3 files (ms_.nbf ; nk.nbf ; radio_.nbf) from your prefered WM6 ROM (I personally use the latest Laurentius & Beast ROM http://forum.xda-developers.com/showthread.php?t=325466) start into bootloader (Power+backlite+softreset) and ROMUpgradeUt.exe
VERY IMPORTANT: you have to charge your batery before any flashing
Hi @all
I've got a problem with my Topaz. I use the hands-free of my car (VW Touch Adapter BT). Everytime it keeps turning back on immediately after the power management turns the screen off.
To handle that all my contacts come to my hands-free, I use Jetware Handsfree extension. There is a patch, which solves the problem, but link is down. Does anyone have this patch or any idea how to solve this problem? I've the same problem without the software and other Roms....
My Rom is a german Rom --> crazyhifirom v1.2 WM6.5 Manila 2.1
Hope this is the right location for this question.
Using Tasker 4.8, LG G3 D851, 5.0.1 OS
I want to turn on the Bluetooth when I get in my car and turn if off when I exit my car. I only use Bluetooth for phone communication in the car. I have searched and found many way to turn off BT but not to turn it on. So I figured I needed a trigger to activate BT.
Looking around for a trigger I realized that I always plug in my USB charging cable while in the car. So I wrote a small profile to turn on BT when power is available and turn off BT when power is lost. Using my PC as a test bed it worked.
Off to the car to test and it did not work. Back into the house for the wall charger and it did not work. Back to the PC and it worked.
I changed the profile from Power USB to Power Any and it worked on all three sources. However, in the car and the wall charger it sometimes fails to activate the BT. But I know it works because I have seen it work.
Question... Is there something I am missing in the profile that will allow consistent results?
Here is my profile
Name: Power Any
Source: Power Any
1st Task: BT On
a: Bluetooth Set On
2nd Task: BT Off
a: Bluetooth Set Off
That's it. Like I said it works. Turns on my BT when I plug in and turns if off when I unplug. However, it is not consistent except when using the PC USB port.
Thanks for any help and Mods, if this is in the wrong place, my apologies.
Brian D
Well, I believe I solved the problem. It was Tasker that was causing the resets. Could have been the profile as well. Either way, the solution was to reboot my phone after making changes to Tasker Profile. Seems as though Tasker does not clear out its buffers as I thought it would.
Ended up making a new profile that now works 100% to initiate Bluetooth when external power is applied to the phone. It will also turn off Bluetooth 1 min. after I remove external power.
Hi Brian, I have a similar situation and was wondering if your profile is still working.