Carmount for diamond with solid rubber case - Touch Diamond, MDA Compact IV Accessories

If bought a solid rubber case from ebay. And i like it. It has a nice grip and covers the ugly backside, but are there any carmounts that does fit a diamond + case that are not the huge and ugly universal mounts? So i do not have to take out the phone out of case everytime i drive car

i have a leather case and a in car holder, just slide it out the case when i put it in the car... not too difficult. think u will be hard pushed to find a holder that accommodates a case, without being a ugly lump.

Related

xda 2 cases

which is the best case to buy for compact size , protection , style and useability in regards to the capability for the belt clip. i have seen the aluminium and plastic one . how does the belt cilp work with that also can you get them in funnky anodised colours.
cheers
Don't know about funky colours but the leather Krussel case is excellent.
O2 standard Xda II case
On the subject of cases, anyone know if it's possible to get a spare belt clip for the standard O2 Xda II case? A tiny bit broke off mine after 1 month and it is now useless as the PDA falls off it.
Neither my local O2 shop nor the UK Xda II Service Centre can supply a replacement belt clip on its own - they want to hit me for £20 for a new case. If I do have to buy one, it won't be from them, that's for sure...
Gadget 8)
Why bother? Just get the Krussel, it's a much better case and way cheaper.
The Alu cases have a screw-in peg on the rear of the case which the belt clip locks onto. Others using the Alu cases have suggested glueing the post in place to prevent it unscrewing during normal wear.
The Alu cases also reduce the signal strength in weaker areas. I purchased the ProPorta model and only used it for two weeks before going back to the standard O2 case.
I am now the very happy owner of a ProPorta Crystal Case. It is very lightweight, adds almost no bulk and looks great.
Unfortunately it does not support a belt clip although I see no reason why you couldn't fabricate something yourself if you were so inclined.
I just got the clear case, its very sexy, wish it had a belt clip but you cant have everyting, there is a thread about the clear case with pics, it's like the alu case but that looses signal strength apparently, although does have sd card holders if i remember correctly and this doesn't...
http://forum.xda-developers.com/viewtopic.php?t=10480
its nice cos u can make and receive calls without the threat of the xda2's slippery surface sliding thru your hands... which is why i used to keep it in my standard case so much... i just got mine from pdamods.com for £15
the standard case offers little protection to the lower sides of the xda2 (not that i have scratches on mine as a result but some people moan of it) but there is a reason, basically it's so you can sit it in the docking cradle without taking it out the case...
moving on, I'm getting this silicon job that pdamods want £20 for, from ebay at only a £10 :lol: this seller has them for sale all the time - here is an example auction with picture http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=5115014427&ssPageName=STRK:MEWA:IT
it doesnt have a belt clip but has a loop by the looks for carry strap / neck strap type effort
Clips
I use cases utilziing the Ulti-Clip from http://www.theclip.com/.
My leather case from HandheldPlanet.com has one.
They are very solid clips. I used a stick-on post on my aluminum case -I took off the screw-in post. Now all my phones/gadgets have the same clip.
Is anybody making a leather case that does NOT have a snap closure, similar to the EB Case for the original XDA? The Krussel is nice, but that strap/snap closure is annoying and slow to use.

Plastic Belt Clip Holster?

Hi All,
Anyone know if there is a plastic belt-clip holster for the P3600. You know, the type where it kind of 'clicks' into place at the top?
Thanks!
Rael
Nope!
I've tried the Seidio one for the Jam thinking they're very close in size, but due to the attachment point on the clip, it does not work.
So until I find a better alternative, I'm using a leather vertical case for a Samsung blackjack - nice snug fit...
how can there be no plastic clip holster for this phone? even my old ppc 6700 with slide keyboard and more complicated design has a plastic holder!
Belt clip
As an alternative, you can probably try a leather case with a 360degree rotating clip?
I got a quite nice one, branded "PDAir". I bought it for $39 AUD.
i use a plastic holster for the Treo 650 in my car and a Treo leather holster designed for the 700w. i prefer the leather holster because it's less obtrusive...

Nexus silicone case/skin

I was just wondering if anyone knows where I can get one that's nice and thin. Got the one they had a T-Mobile and it adds so much thickness! !!! Leme know! Thanks
Sent from my Nexus One using XDA App
I've got the Incipio case on my Nexus One - it's a *really* thin silicone gel + a harder plastic-ish snap-on. It's similar to the Otterbox Commuter case, but much thinner.
Thanks man. Exactly the kind I want.
Sent from my Nexus One using XDA App
Yeah thanks for that, I've been wanting something exactly like this too.
I have the otterbox commuter, and it is too bulky, coupled with the smooth hard plastic shell it makes the phone hard to hold on to. Trouble is, I believe you need the extra hard plastic shell, so that the silicone protection at the edges of the screen don't easily pull away, like it does with just a bare silicon case.
Hopefully this one is better, will see when it arrives, I'm so sick of trying to find the perfect case for me.
how about boxwave or casemate? anyone use there stuff? i like the boxwave silicone gel cover. fixing to order that one. I have the bse on it now but i like a little bit more protection, if you know what i mean. i like the ultra feather plastic case though. i don't know how much protection it will give but it looks simple and clean.
I've got the Case-Mate Gelli Case Grey. I like the CM better then the Otterbox Commuter Case.
Pic 1
Pic 2
Ok well I got this Incipio silicylic hybrid case today, and I'm not that impressed.
It looks nice, and does give the extra support for the silicone down each side of the screen I was looking for. But they've totally cocked up the bottom of the case...
There is no real protection between the trackball and the USB port. The hard plastic is totally cut away there to the back of the phone, leaving a flimsy flap of silicone horizontally between the ball and port. Also the plastic and silicon is cut away right out past the dock port pins, leaving the phone body exposed to a straight down drop on its arse end due to this gaping cutout.
The plastic shell also has very sharp edges at that massive gaping cutout at the bottom too, so it needs dremmeling right out of the box.
If only they'r run a strip of plastic along that edge between trackball and usb port and not just silicone, none of this would be an issue, and it would have been my perfect case. Grrrr.
Do any of these cases allow the use of the desktop or car dock or do they block the pins/are too bulky?
MaximReapage said:
Do any of these cases allow the use of the desktop or car dock or do they block the pins/are too bulky?
Click to expand...
Click to collapse
Too bulky, the nexus dock only just fits the bare phone. In saying that, its not that the cases are that bulky (except maybe the otterbox ones), just that that the dock is a bit fussy about who it takes for a ride.
stumo5 said:
Ok well I got this Incipio silicylic hybrid case today, and I'm not that impressed.
It looks nice, and does give the extra support for the silicone down each side of the screen I was looking for. But they've totally cocked up the bottom of the case...
There is no real protection between the trackball and the USB port. The hard plastic is totally cut away there to the back of the phone, leaving a flimsy flap of silicone horizontally between the ball and port. Also the plastic and silicon is cut away right out past the dock port pins, leaving the phone body exposed to a straight down drop on its arse end due to this gaping cutout.
The plastic shell also has very sharp edges at that massive gaping cutout at the bottom too, so it needs dremmeling right out of the box.
If only they'r run a strip of plastic along that edge between trackball and usb port and not just silicone, none of this would be an issue, and it would have been my perfect case. Grrrr.
Click to expand...
Click to collapse
True, but I don't find it that bad, personally. I agree that plastic would have been nice, but since it snaps at the bottom, they would have had to entirely redesign the hard plastic shell.
I *did* have to dremel the headphone port just a bit to fit some of my speakers and headphones - the silicone flap still fits nicely, though, and if you have slender headphones, it probably won't be a problem.

Case mate vs ballistic sg case?

I got my htc sensation and I just want the perfect case for protection. I've read the other threads but there weren't for this two. It cause mostly everybody likes the case mate but is the ballistic more protective since the corners bigger and the back better. And don't say the otterbox cause I don't like that one.
I've got the CaseMate Tough and it's perfect.....
Tough outer plastic cover, with a secondary rubber cover that sits nicely over the phone.
Only criticism is that it is awkward to take on and off and I had to trim around the headphone hole to get my headphones to fit...but that is minor.....
Just wish I had it on my phone before I dropped it.........

Belt "Holster" recommendation:

If anyone is looking for a belt holster style carrying case, this is one that I got a few weeks back:
https://www.amazon.com/gp/product/B01H2K0M58/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
So far it's worked very well for me. I keep the Incipio Battery Pack on all the time on my phone and it fits just beautifully in this case. Just about the perfect size to easy in, easy out with the battery pack on it. Not very expensive either. The material is appears to be good quality.
I was even able to fit the phone with the JBL speaker mod on it in the case, though that was a tight fit.
There are two negatives worth noting:
1. It's big! Well, obviously it has to be cause it's a big (ie, tall) phone so it looks a little large on your hip. If having something big and heavyish on your hip is going to bug you, then don't get it.
2. I'm not thrilled with the clip... It's strong enough, but it doesn't hold as tightly as I'd like. This makes it easy to get the case on and off your belt... but a little too easy. A couple of times I've pulled the whole case off when just trying to get my phone out. And at least once when I was sitting in a deep couch for a while my normal movement while seated moved the case enough up the belt that when I stood up the case fell off my belt. (It's possible I just one a case with a belt clip that isn't as tight as it normally should be.)
Thanks for the review! Couple questions...
Is it long enough, that without a mod attached, the phone will fit with a case on it? In particular I was thinking of the bumper.
I work on trucks for a living. Having it slide off my belt would be annoying. Do the clips have enough space, that were I to glue them down, I'd be able to slide a belt through them?
Never mind, I see it has loops.
How well has it held up, since you've purchased it?
Just to let you know...the Incipio Performance Level 4 cases come with a holster as well. And they're not bulky like the OtterBox Defender series.
As a follow up, the AGOZ holster is great! At first I thought the clip was overkill, and contemplated removing it, but in unison with the loops, it firmly holds the holster where I want it. I use it all week long at work, since I work on trucks, and want the most protection possible, without the Otterbox bulk in hand.
I did look at the Incipio holster, but it looked awkward used in the horizontal position. I did purchase their bumper, which I love. On weekends, I use the Seidio Dilex Pro holster for the Galaxy Note 5, recommended on another forum. It's a perfect holster in combination with the bumper, and allows for any mod to be used.
I just want a simple clip holster that works with the back panel that came with the phone. No bumper, no case... Just a belt clip.
No where to be found.
I use this sometimes. Works fine with the style shell or Incipio battery pack. It has a nice sturdy metal clip that allows the case to rotate.
Turtleback Vertical Ballistic Nylon Holster Pouch Extended - Fits Samsung Galaxy S5 with Otterbox - Metal Belt Clip - Magnetic Flap Closure - Made in https://www.amazon.com/dp/B00KO8LFPM/ref=cm_sw_r_cp_apap_oCoqdZ6G7QI1N
Sent from my XT1650 using Tapatalk
I bought this 3 years ago. It will fit any phone, phone/mod out there. I got tired of snapping off the otterbox holster clips getting in and out of the car.
https://www.amazon.com/gp/product/B001DZPBXM/ref=oh_aui_detailpage_o04_s01?ie=UTF8&psc=1

Categories

Resources