A friend has just purchased a phone from ebay and it also has the UTStarcom on the front of the phone but when I tried to flash it it gave me a error about the country code was wrong and would not flash it. He is with alltel in the U.S. The phone works great and is activated with no problem. Was just wondering if anyone has run across this ERROR 120 country ID Error and how to fix.
He is running WM 5 and would like to go to WM6.1 and the bootloader VER is 2.04
Rom 2.11.20.WWE
Radio 1.15.00
Related
Hi,
I have a M2000 which started to up the Orange NL ExtRom version 1.40.230. When I ran the app it went into bootloader mode (USB/v2.07)but BaUpgradeUT reports Error 101 and Exits.
Sooo, I downloaded the original shipping ROM and tried with that - same result, then tried using MaUpgradeUt_noID in the same folder as the original ROM - as it ignores the information that is reported back (apparently none in my case). It tells me on the next screen that it is upgrading from <blank> to <blank> - worrying. Click Upgrade and I get Error 150: ROM Upgrade Utility Error. Try to do the same with the 1.40 ROM by locating the temporary files for the .exe and running MaUpgradeUt_noID from there - same error.
It's now stuck in bootloader mode...I didn't put anything on to this before, so I can't see how the operator code would be overwritten.
Much as the M2000 works as a desk paperweight, I'd rather find a way of pushing a viable image onto it and getting it back working. Any suggestions as I am running a C500 as a replacement and going nuts with it's lack of, well, anything...
TIA
P.S. Even another ROM that will load onto it would be useful, so that I can get it back into a state where I can mess around with it again...
do you have a firewall and antivirus installed?
if i would disable them then try flashing again, I got my c500 stuck in bootloader mode after trying to sim unlock it with firewall and antivirus running
disabled them and re-ran the sim unlock and it worked, so hopfully it is the same problem as you are getting with the rom
Brother in law got a m500 with the original uk ornage rom on it. He downloaded an ornage upgrade from oranch.ch and started the upgrade process IN VISTA.
It went into bootloader mode and then came up with an error message.
When it resets now it goes through all the setup and installs all the software and customisations and then crashes back into bootloader mode.
we have tried all sorts of combinations now using my xp computer:
Using no_id with orange.ch rom, qtek, imate, tmobile rom, with USB on and off and also the tmobile radio upgrade too.
THe closest we can get is country id error when upgrading a rom.
On the radio upgrade it hangs at 0% giving error 114
Anybody got any ideas?
Help!!!
I have a sprint 6700 and have tried to flash to VZW with zero success. I have tried everything I could think of...
Found the sprint msl with getspc no problem.
Downloaded the vzw latest aku3.3 rom, won't install.
Tried to install in bootloader and not in bootloader mode.
Tried different roms and none work (official sprint ROM loads fine)
Tried BuildOS with noid and get the same error.
I have ver 102 bootloader and have tried with activesync on and tried with activesync disabled.
I never get past the first screen. I get "Error 120 Country ID Error" window and only option is exit. I looked here, ppcgeeks, pdaphonehome, and google and have not come up with any solutions....
This seems to be an impossible thing, to change from sprint to verizon....
Any thoughts or ideas????
Thanks
T
Same Here ! Help !!
I have the same problem with you all,, but it seems no one relpies to this thread. So what i should then using rom for sprint or what?
ive got a t-mobile wizard 200 dutch edition
i had a win 6.5 rom loaded and it worked fine
but for some wierd reason i wanted to downgrade it to the original win5 rom
when i was at 55% my 1 year old sun pulled the usb cable
now i can't get any new rom in the phone that works
is there anyone that could help me
everytime i get the bootloader screen and that's al
Don't give up hope. As long as you can get the bootloader screen, you should be able to burn a rom. Try the CR96 WM6.5 ROM, in my signature, which if I remember right comes with a Vista RUU. If it doesn't, search this forum for Vista RUU, which I have found to work well for installing ROMs from the bootloader, in XP or Vista. I don't know about Windows 7, since I have never had it.
i've tried the link you sugested
after running the update the startup screen of the phone changed from t-mobile to a HTC logo and after that it shows the bootloader and nothing more
ipl 2.18.001
spl 2.26.001
is there anyone with an original rom for this phone becouse the one i thought was original is damaged and maybe an original rom can repair this phone
or is there anyone with different idea to solve this problem ?
edit: i found an original german ship rom but when i try to laod that on the phone he gives a error
something with wrong phone id
edit: i found a file with t-mobile g4 ipl/spl after i loaded that one
ipl changed to 2.26.001 spl stayed 2.26.001 but stil no respnce to loading roms
i found a threat where they where talking about the love rom
i downloaded it and uploaded it to the phone and everything was back online and i could do anything again with the phone
Guys, I have a huge problem with my HTC HD2, bought via t-mobile in 12-2010. The mobile is (of course) T-mobile branded, SPL 3.03.0000. I wanted to put Andreoid on it. All I tried did not work to flash the memory. I cannot install MAGLDR112, not Radio Leo 2.15.50.14. When I tried: RUU_Leo_S_HTC_GER_3.14.407.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship the flashing shows 1% AND THEN i get the message: wrong seller ID.
If anybody has any idea what i can do with this thing - great to get good help here. Thanks, Andy