Related
This is for those of you that may need warranty work, exchanges whatever. It may or may not be an issue but im sure many of you have noticed that clockwork will pop up whenever the phone is powered off with a usb connection present. Which in most cases would be an immediate red flag for those of you needing work done. This will completely restore your phone and remove the clockwork recovery flash.
Update: I no long have an Aria to try this with but if you guys are running into issues try this as well.
winsettr said:
I'd like to suggest that you update the first post to include a link with the last 2.1 RUU, seeing as the 2.2 RUU breaks the ability of future rooting (for now). I have uploaded what I believe is the updated RUU 09142010 to MegaUpload, linked below. Just thought this might help
http://www.megaupload.com/?d=XXYBORR6
Click to expand...
Click to collapse
1.) Download ATT Original Shipped ROM file from here:
http://www.htc.com/us/support/aria-att/downloads/
2.) Disconnect USB connection to phone.
3.) Power down phone
4.) Boot into Fastboot Menu (hold trackpad on start)
5.) Insert USB
6.) confirm that the phone shows "FASTBOOT USB"
7.) Run downloaded exe file
8.) Process will take a few min at the end you should have a 100% restored and unrooted phone.
It may seem self explanatory now but I was running into issues getting the HTC tool to communicate with the phone and it would fail whenever trying to send the phone into the bootloader. Thought I would just save you guys the headache.
thanks for your solution. was thinking about unrooting my phone and exchanging my aria for a samsung captative...
thanks man. doubt i'll do this, but i might need this just incase ATT and HTC actually come through with a stable update to froyo 2.2 within the next couple months.
I think it will be safe to assume that said 2.2 ROM will begin floating around in a rooted form not before too long, and will be flashable via recovery.
this is great info to have. great work.
???
has anyone actually tried this? because my pc dosent recognize phone when i try
bred904= said:
has anyone actually tried this? because my pc dosent recognize phone when i try
Click to expand...
Click to collapse
install Android SDK USB drivers first
??
i think i did... i installed something from google called android-sdk. and when i connect my phone in bootloader i can see fastboot change to fastboot usb and my pc says driver successfully installed. but when i run the .exe file it never sees my phone. also htc sync wont connect and neither will droid explorer. thanks
i agree with bred, can't seem to restore the original rom. it doesn't recognize it during the process
I have tried this method on 2 computers and the exe can NEVER find my phone.
I have installed the SDK USB drivers, my computer sees the Android 1.0 device and sees it as the HTC booloader. And I see FASTBOOT and FASTBOOT USB when unplugged/plugged.
----UPDATE 2010-07-23----
After further research I was able to determine that even with the device NOT in FASTBOOT mode, that adb couldn't see it, so I thought it might be a driver issue.
I've gotten my computer to recognize the device when it's booted normally. But when put the device in FASTBOOT or the BOOTLOADER, adb can't recognize it and I can't get the recover exe to recognize the device, regardless of mode.
I have the latest clockwork recovery installed and I would like to get everything back to factory to exchange for a captivate.
theres no way to do a nandroid backup or anything like that? curious because i was going to take mine back tomorrow to exchange for the captivate as well. i bought mine from radioshack so i might try my luck and just return it rooted . i did the trade in program with them with my iphone and it was jailbroken and they still accepted it. i dont think i would try that with at&t though... worse comes to worse just return it and say it was like that when you got it! maybe an at&t employee messed around with it before you bought it. they cant prove it was you.
Can anyone confirm this works? Just in case. This might be something I will need to do quick fast and in a hurry in the morning. And I'm hoping that if it comes down to this I won't have any issues.
Sent from my HTC Liberty using XDA App
I have been thoroughly unsuccessful in getting this method to work.
I have tried it on 3 different computers and I can never get the HTC OriginalShipRom.exe to find my phone.
I have tried following the instructions to the letter, I have also tried plugging in while booting the phone into various menus (HBOOT, FASTBOOT, and regular booting), which was advice given to me in the IRC room.
I'm plugging the phone in right after I click "Next" on the "Plug your phone into the usb port" right as it shows the "Verifying data on your PDA" window. I have tried with the phone in HBOOT, FASTBOOT, and while booting the phone, none of these seem to work.
I've also tried it with just plugging the phone in and running the exe. Nothing seems to work. People in the IRC channel are claiming successful factory restores, but I can't seem to get it to work.
So can someone please update the first post with more thorough instructions? Because those instructions don't seem to work.
The following instructions came directly from the HTC webiste for restoring the original state of the phone.
1. Download and save the HTC Aria™ Original Software to your PC.
2. Power your device off.
3. Connect your device to your PC via the data USB cable.
4. On the device, press and hold the Volume Down and Power Button until you get the bootloader screen (a white screen with 3 Androids on the bottom).
5. Press the Power Button once to enter FastBoot mode.
6. Locate the HTC Aria™ Original Software that you downloaded and double-click on the file to launch the RUU Wizard.
7. Follow all of the RUU Wizard instructions shown on your PC.
8. Once the update is complete, click Finish in the RUU Wizard and the device will reboot.
9. Once the device reboots it will run through the Customization Process; this must be allowed to complete.
10. Once the Customization process is complete, the device is then ready for use.
I hope this helps. I haven't tried it yet, but would like to know if this works in case I need to do this as well.
OutsiderWV said:
The following instructions came directly from the HTC webiste for restoring the original state of the phone.
1. Download and save the HTC Aria™ Original Software to your PC.
2. Power your device off.
3. Connect your device to your PC via the data USB cable.
4. On the device, press and hold the Volume Down and Power Button until you get the bootloader screen (a white screen with 3 Androids on the bottom).
5. Press the Power Button once to enter FastBoot mode.
6. Locate the HTC Aria™ Original Software that you downloaded and double-click on the file to launch the RUU Wizard.
7. Follow all of the RUU Wizard instructions shown on your PC.
8. Once the update is complete, click Finish in the RUU Wizard and the device will reboot.
9. Once the device reboots it will run through the Customization Process; this must be allowed to complete.
10. Once the Customization process is complete, the device is then ready for use.
I hope this helps. I haven't tried it yet, but would like to know if this works in case I need to do this as well.
Click to expand...
Click to collapse
My problem is with step 3. The second I plug my powered down Aria into the computer via USB, it powers on and goes directly into Clockwork.
If I boot the device into FASTBOOT, then plug it in, and then run the exe, it says it can't locate the device.
If you had flashed the unrevoked clock work you will not be able to plug your phone into the computer while its turned off. Your best bet is to boot into fastboot then plug in your phone. And try to do this under linux since there is no need for drivers.
Sent from my HTC Liberty using XDA App
farquep said:
If you had flashed the unrevoked clock work you will not be able to plug your phone into the computer while its turned off. Your best bet is to boot into fastboot then plug in your phone. And try to do this under linux since there is no need for drivers.
Sent from my HTC Liberty using XDA App
Click to expand...
Click to collapse
Hi farquep, can you give me instruction on how to use linux what's the command line?? thanx
If you do it under linux, just download the file and run it like any other program in any other operating system. Although you will have to let the file run as an executable under permissions. I don't know if you need to install WINE which will emulate windows programs. There should be no need for terminal scripts.
Sent from my HTC Liberty using XDA App
Doesnt recognize my device at all. If I'm returning to insurance company, should I even bother taking off clockwork? I already have the replacement.
EDIT:
Update:
Just worked for me. I had to install aria_shipped_rooted_signed.zip first then HTCAriaOriginalShipROM.exe recognized the phone.
SysAdmNj wrote:
> I had to install aria_shipped_rooted_signed.zip first
perhaps that can be added to the original instructions.
the archive can be downloaded from here
I first want to thank everyone at UnrEVOked for what they've done. I'm posting this because there aren't any really detailed instructions. Its an easy enough root, but I know I've been there before and even the simplest things can be tough if things aren't laid out. So here's a step by step tutorial.
Due to some bugs, Unrevoked 3.2 was taken down shortly after being released, but the updated version is now LIVE! So obviously we're going to bring you a video tutorial on how to do it! Thanks to the guys at Unrevoked for giving us this simple solution to rooting the HTC Aria.
LINK TO VIDEO WALKTHROUGH FOR HOW TO ROOT THE ARIA
◄●REQUIRED DOWNLOADS●►
EVERYONE: Unrevoked3. Download the version for your OS.
WINDOWS USERS: unrEVOked modified USB driver
◄●How to Install HBOOT Drivers (Windows Users ONLY)●►
If you're using Windows, you're going to have to install the HBOOT drivers first. You can follow this video tutorial:
How to Install HBOOT Drivers
and follow along with these written instructions provided by the Unrevoked team:
Download the unrEVOked modified USB driver and expand it somewhere you will remember.
Turn off your phone, then boot it into the HBOOT menu by holding power and volume down.
On your phone, you will have to select HBOOT USB at that menu by pressing volume down four times, then power. Wait until the screen flashes through an “SD Checking” message before pressing buttons; otherwise, the phone will ignore keypresses.
Connect the phone to your Windows machine with a USB cable and wait for the phone to say HBOOT USB PLUG on screen.
Open Device Manager.
Click Start, then right click on Computer, then click Properties, then click Device Manager.
Under Other devices, you should now see the Android 1.0 device.
Right click on Android 1.0 and click Update Driver Software:
Click on Browse my computer for driver software.
Click on Browse and select the Android USB Driver folder on on your computer, click ok, then click next.
You should get a status bar indicating that the driver is installing. If you get any warnings, just click Ok.
Your driver should install.
Click Close and make sure Android Bootloader Interface is listed under Android Phone.
◄●Instructions●►
Make sure you downloaded Unrevoked3 for your OS.
If you're on Windows, make sure you "uninstall HTC Sync or any other program that might talk to the phone over USB (doubletwist, etc). They will cause problems" (Unrevoked.com).
Plug your phone into your computer with USB.
Drag down from the notification bar on your phone and select "Charge Only" and "Remember this"
Make sure your phone has USB Debugging turned on by going to Menu>>Settings>>Applications>>Development and checking USB debugging.
Run the Reflash application that you downloaded.
Unrevoked will run its processes. Follow the few instructions it gives and thats it!
You're now rooted!
kopimi said:
If you're stuck on "Waiting for Device", INSTALL HTC Sync, but do NOT run it.
HTC Sync will load the necessary ADB drivers onto your computer, but so long as you do not let the process run while you are trying to run unrEVOked3, it will NOT interfere. Knowing this would have saved me quite a lot of time, so hopefully someone else reads this and they can salvage their sanity
Also, if you're stuck on "Waiting for Root", go ahead and restart your Android while its connected to the USB. It took me one reboot for the root to go into effect, and right after that, unrEVOked3 finished.
Click to expand...
Click to collapse
Great guide, would have really helped me last night while I was pulling my hair out haha. One thing you may want to add to the OP:
If you're stuck on "Waiting for Device", INSTALL HTC Sync, but do NOT run it.
HTC Sync will load the necessary ADB drivers onto your computer, but so long as you do not let the process run while you are trying to run unrEVOked3, it will NOT interfere. Knowing this would have saved me quite a lot of time, so hopefully someone else reads this and they can salvage their sanity
Also, if you're stuck on "Waiting for Root", go ahead and restart your Android while its connected to the USB. It took me one reboot for the root to go into effect, and right after that, unrEVOked3 finished.
kopimi said:
Great guide, would have really helped me last night while I was pulling my hair out haha. One thing you may want to add to the OP:
If you're stuck on "Waiting for Device", INSTALL HTC Sync, but do NOT run it.
HTC Sync will load the necessary ADB drivers onto your computer, but so long as you do not let the process run while you are trying to run unrEVOked3, it will NOT interfere. Knowing this would have saved me quite a lot of time, so hopefully someone else reads this and they can salvage their sanity
Also, if you're stuck on "Waiting for Root", go ahead and restart your Android while its connected to the USB. It took me one reboot for the root to go into effect, and right after that, unrEVOked3 finished.
Click to expand...
Click to collapse
Thanks man Added to the OP
PS - Others have asked elsewhere if it flashes a custom recovery. Yes, it flashes Clockwork
I rooted my girlfriend's Aria with this and I see SuperUser Permissions (as you would with a root) but when I go to Android SDK and type "adb shell" I get a $ back instead of a 2. I also typed su and got back a permissions denied. I am also unable to do "adb remount" due to permissions. Is there any way around this?
Thanks
-Mike
LTD36 said:
I rooted my girlfriend's Aria with this and I see SuperUser Permissions (as you would with a root) but when I go to Android SDK and type "adb shell" I get a $ back instead of a 2. I also typed su and got back a permissions denied. I am also unable to do "adb remount" due to permissions. Is there any way around this?
Thanks
-Mike
Click to expand...
Click to collapse
You need to give the adb shell SuperUser permission, too. Load the SuperUser app and then make a adb shell connection while the SuperUser screen is up. Then when you type su at the $ prompt, the SuperUser app will give you the Allow/Deny prompt.
Regards,
Tom
tpbklake said:
You need to give the adb shell SuperUser permission, too. Load the SuperUser app and then make a adb shell connection while the SuperUser screen is up. Then when you type su at the $ prompt, the SuperUser app will give you the Allow/Deny prompt.
Regards,
Tom
Click to expand...
Click to collapse
Thanks for helping out and replying to that. I've been swamped with other stuff lately.
I just tried this and can't seem to get it to work. Can anybody help me out? I'm sure that I've done something wrong. I finally got unrEVOked to recognize my Aria, however when I clicked "Ok" (to root it when the message popped up) it said "Failed to push recovery. Terminating." What did I forget to do??
Nevermind... I got it to work finally.
Still shows S-ON
Freak said:
Still shows S-ON
Click to expand...
Click to collapse
Unrevoked 3.21 does not turn S-OFF on the Aria; that is only for a few CDMA phones like the EVO, Incredible, Hero and CDMA Desire.
Regards,
Tom
tpbklake said:
Unrevoked 3.21 does not turn S-OFF on the Aria; that is only for a few CDMA phones like the EVO, Incredible, Hero and CDMA Desire.
Regards,
Tom
Click to expand...
Click to collapse
Yeah don't worry about not having S-OFF, its not something necessary for a rooted phone. As long as you've got Superuser, you're set and rooted.
Sorry for my noobiness on the Aria, but what does using unrevoked to root it do for the Aria?
Sent from my HTC Liberty using XDA App
Still unable to install applications with the phone rooted
Hi, I followed the instructions, after I got the "done" message, i went to nandroid option made a backup, when it was finished i restarted the phone.
I´m trying to use Astro to install Sygic on the phone but I always get the same message.... you phone is blocked.
I see the little ninja in apps... what else is missing? what is wrong?
Thanks for your help...
I´m about to give up and sell this phone
The day i got the phone I upgraded it to the latest firmware available in HTC web page, is that the ugly part of the story?
-------------------------------------------------------
I solved this issue by istalling a custom image.
Last night I istalled the liberated_aria_ddx_R012_signed, I have to say that everythign is going perfect, no problems so far.
But everytime I plug the cable and the phone is off, it starts in recovery mode, so i have to select reboot.
Before flashing the image, I formated the SD card, wiped data, cache and dalvik cache.
If I turn on the phone it starts normally, It´s just happening when I plug the usb cable or the charger.
I also made other test, I plugged the phone when it was on, then I turned it off (with the cable plugged), when it finished the turning off process it automatically started again in the clockwork recovery mode.
Could you please tell me how to solve this?... this is my first Android phone, I donñt want it to start in recovery mode when I just want to charge it.
Thanks in advance
Phone needs to be on while charging. You no longer have to turn equipment off to get a full charge. If you charge while it's off it will go into recovery mode.
echodun said:
Phone needs to be on while charging. You no longer have to turn equipment off to get a full charge. If you charge while it's off it will go into recovery mode.
Click to expand...
Click to collapse
Thanks for your prompt answer.
Is there any way to change it?, i´d like it to work as usual, you plug it you get the green battery charging... that way it is impossible to make misstakes, for the next time i need to get in to recovery mode i would push pwer + volume-.
maybe by applying a mod.zip using clockwork?
0ptimus82 said:
Thanks for your prompt answer.
Is there any way to change it?, i´d like it to work as usual, you plug it you get the green battery charging... that way it is impossible to make misstakes, for the next time i need to get in to recovery mode i would push pwer + volume-.
maybe by applying a mod.zip using clockwork?
Click to expand...
Click to collapse
No way that I know of. It's on my Cyangenmod ROM too. Maybe a product of using the Unrevoked method of rooting. When I plug mine in to the computer charging cable I get a red light for charging and then screen goes off in about 10 secs. Not a big deal to me although it through me for a loop at first too.
echodun said:
No way that I know of. It's on my Cyangenmod ROM too. Maybe a product of using the Unrevoked method of rooting. When I plug mine in to the computer charging cable I get a red light for charging and then screen goes off in about 10 secs. Not a big deal to me although it through me for a loop at first too.
Click to expand...
Click to collapse
I know... it´s not a problem, it´s just that it´s not the way it happened for some years ago since i´ve had a cell phone .
So, the only way to avoid it is to uninstall clockwork recovery?
Cracked my screen on my rooted aria after my camera stopped working and I had filed for a warranty replacement. Was so happy with the original phone that I took the $300 hit they would apply if I sent the bad phone back with physical damage...I decided to keep the new phone and ATT will allow me to pay them in several installments with my monthly bill..
I promptly used your instructions to root this new phone. Took me all of 5 minutes.
Great job.
You can replace the glass on an Aria for a lot less than $300.
I bought a HTC One S for T-Mobile USA. Has been working flawlessly. Today I got an OTA and my world is now upside down. I have spent 5 hours trying countless things to get my phone back up to no avail.
my phone stats:
hboot 1.09.0000
radio 0.16.31501s.16_2
open dsp-v28.1.0.32.0504
emmc-boot apr 2 2012,21:08:24
UNLOCKED
TAMPERED
How do I get back to square one and turn this phone back into something usable?
It has something called TWRP 2.1.7 installed on it and I have tried fastboot and a host of other things to remove it. I have even tried the thread on sending your phone back to stock but I can't access RUU because it won't load the driver. I have never rooted this phone nor do I believe USB Debugging was turned on before I accepted the OTA. I can communicate via fastboot in the command shell via a usb cable. The PC wont mound the SD card so I can't copy a new image and reboot this thing on a different rom and then send it back to stock.
I am about ready to throw it away because i can't seem to get a .zip file to it so it will run again (for putting a working build on it). There are no images to boot to. Somehow that got wiped and no backup was done. I don't give a poop if the data is whiped. Its all backed up via dropbox and exchange. I just want it up and running so i can use RUU and send it back to stock.
Any help would be appreciated.
Scuba_Luv said:
I bought a HTC One S for T-Mobile USA. Has been working flawlessly. Today I got an OTA and my world is now upside down. I have spent 5 hours trying countless things to get my phone back up to no avail.
my phone stats:
hboot 1.09.0000
radio 0.16.31501s.16_2
open dsp-v28.1.0.32.0504
emmc-boot apr 2 2012,21:08:24
UNLOCKED
TAMPERED
How do I get back to square one and turn this phone back into something usable?
It has something called TWRP 2.1.7 installed on it and I have tried fastboot and a host of other things to remove it. I have even tried the thread on sending your phone back to stock but I can't access RUU because it won't load the driver. I have never rooted this phone nor do I believe USB Debugging was turned on before I accepted the OTA. I can communicate via fastboot in the command shell via a usb cable. The PC wont mound the SD card so I can't copy a new image and reboot this thing on a different rom and then send it back to stock.
I am about ready to throw it away because i can't seem to get a .zip file to it so it will run again (for putting a working build on it). There are no images to boot to. Somehow that got wiped and no backup was done. I don't give a poop if the data is whiped. Its all backed up via dropbox and exchange. I just want it up and running so i can use RUU and send it back to stock.
Any help would be appreciated.
Click to expand...
Click to collapse
I hate to tell you this but if you never unlocked or rooted your phone, somebody did. Your device is unlocked and running a custom recovery therefore you cannot accept over the air updates and that is your problem. You did not buy your phone that way from T-Mobile so what did you really do to get to this point?
Behold_this said:
I hate to tell you this but if you never unlocked and rooted your phone, somebody did. Your device is unlocked and running a custom recovery therefore you cannot accept over the air updates and that is your problem. You did not buy your phone that way from T-Mobile so what did you really do to get to this point?
Click to expand...
Click to collapse
I never said I bought it as OEM. I also never thought to ask the guy I got it from if he rooted it or unlocked it.
Relocking the boot loader then running an RUU should fix the issue. Once you do that enter the recovery and wipe everything/factory reset.
Then if you are trying to run a custom ROM you should be able to mount your SD card and push one to the phone.
Sent from my HTC One S using xda premium
beats4x said:
Relocking the boot loader then running an RUU should fix the issue. Once you do that enter the recovery and wipe everything/factory reset.
Then if you are trying to run a custom ROM you should be able to mount your SD card and push one to the phone.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Great reply however I am short on knowledge on how to do what you have recommended. I don't know how to relock the boot loader nor can I run RUU because I can't get the driver installed. Any help would be awesome. Thank in advance. Sorry I'm a noob at this.
In the dev section there is an all in one toolkit that will execute the correct scripts for you. Download it, then run it. You may also need the HTC sync drivers installed on your computer.
Once you see that the bootloader is locked run the ruu.
And don't apologize for being a noob, I am too lol. We all need help to get started.
Sent from my HTC One S using xda premium
If you install HTC sync to your pc it should install the driver's you need. Then install the one s tool kit in developers section to relock. Then run ruu.
Also, anything you see in blue text is what you'll need to type, or copy/paste, to avoid any quote confusion.
Files You Need:
T-Mobile USA RUU file (mirror) - it's about 563 mb, and worth saving once you download it.
Extremely Important: If you're on another carrier you'll need a different RUU file - DO NOT try and run this RUU file, it could really screw you up. Go to this link to find the right RUU file.
HTC Drivers (mirror) - You probably already have the drivers installed if you're needing this thread, but just in case...
ADB / Fastboot (mirror) - same as the drivers, but again, just in case...
Initial Setup:
Again, some of this might be redundant as you might already have this setup if you rooted/unlocked.
Install the HTC drivers if you haven't already
Unzip the adbfastboot.zip file to your desktop (anywhere, but I find it easiest to get to it on the desktop for my habits)
Getting into the bootloader (hboot):
If you're stuck in a boot loop, pull the batt... oh wait, we can't do that here. To perform a hard reset, hold down the power button for 10 seconds - in the process you'll see the softkeys start blinking, then it should reset. As soon as it starts to reset, release power, and hold down the volume-down button - hold it until hboot pops up (white screen, colored text).
If you're phone is fully powered off (make sure "fastboot" is disabled - settings > power), hold the volume-down key and while holding it, press and hold power for a few seconds. You can probably release the power button, just make sure you keep holding volume-down - after probably 3-5 seconds (maybe a bit more), hboot should come up.
If the phone is on and you're plugged in to your computer, make sure "usb debugging is enabled" (settings > developer options), shift+right-click the adbfastboot directory on your desktop (or wherever you put it), choose "open command window here", and in the prompt that comes up, input adb reboot bootloader.
Restoring:
Once you're in hboot, make sure you select Fastboot (if you don't see it, you're in Fastboot already). In the command prompt referenced above, input fastboot oem lock. This will relock your bootloader in order to allow the RUU to run. Historically this has been necessary for an RUU to run, but I haven't actually tested it without relocking on the One S, and assumed based on previous HTC devices that this would continue to be the case. Edit: thanks rbrookstx for confirming that re-locking is necessary
Your phone will reboot when it relocks - follow the steps above to get back into hboot.
Once you're back in hboot, make sure you're in Fastboot, and open / run the RUU file. It'll go through some initial prompts, then it should start. It takes about 10-15 minutes, maybe less, depending on your computer.
Once it's done, it'll simply go back into hboot - reboot, and you're good to go.
A couple of notes:
When you unlocked and flashed a custom recovery (if you did that), hboot probably said "tampered with" and when it booted up, it probably had a red message under the "HTC" logo about being a developer only device. That should be gone now. It should boot up clean, and hboot should simply say "relocked", with no tampered message.
Until a better solution comes out, once you unlock the bootloader with HTC's official method, it can never be locked the way it was from the factory. "Relocked" is the best you can do.
Click to expand...
Click to collapse
This is what worked. I had to search the internet for this stuff but the HTC driver, the fast boot and the RUU with a matching or higher radio number all made it work out.
Hi there,
i have a huge problem. As there was no warrenty left for my One S I thought about to change the firmware to CM11.
I have to admit that i don't have any experience in doing such things, but i thought, it couldnt go wrong if i follow a tutorial.
So at first i unlocked the bootloader via HTC website and istalled TWRP 2.7.1 (latest version). Everything went well, I placed the ROM into the phones root directory, started the recovery and then whiped it before choosing install and selected the file. After about 30 seconds the phone reported the step was successful and i pressed reboot. Then there was the HTC starting screen and then a black screen.
After that i had no reaction but the blinking buttons when i press the power button for a longer time. But it changes nothing. No normal boot. No access to fastboot. Only if i connect it to my PC there is an aditional device to see, but whitout any access.
I know I did wrong but i have no idea what or how to fix it. I hope you can help me.
ElDorado1993
Now i found a way to get access to fastboot again, but i dont really know what to do now.
Can you give me an detailed tutorial, for jelly bean or kitkat (dont matter) that is surely working now?
My main problem is that i can't copy my files into the root directory as i cant boot the phone.
Does it show up in computer connected devices?
If it does, download stock kernel and ROM and upload to phone and go into recovery[power +volume up while off] and flash them both kernel first.
Sent from my ZTE_N9511 using XDA Free mobile app
The problem is the phone wasnt ever shown as device on the pc (like a flash drive) since version 4.1 so I allways needed some tricks like airdroid. So i suppose i need adb commands to copy files and i dont have so much experience in doing this.
Do you know how to use adb?You don't need adb I just wanted to know to see if it shows up there and not on computer you simply need to install the drivers.Try holding down all 3 buttons to see if it powers down. Do what it says http://www.technewscentral.co.uk/enter-fastbootbootloader-mode-htc-one/id_7930 if works go into fast boot. Does it say locked or unlocked. If unlocked go herehttps://github.com/koush/UniversalAdbDriver and get the windows installer if your on windows.
Sent from my ZTE_N9511
I now found out how adb and fastboot are working, but the main problem now is, that it says the sdcard cant be mounted. I tried this tutorial http://forum.xda-developers.com/showthread.php?p=25557817#post25850720 but i dont know how to do the first step. Du i need an extra file and where do i get it from and how to use it. As long as i dont get back this access, i couldnt install any OS. I tried also sideload. It was able to copy but cant install because of the missing sdcard access.
I hope you can help me to become my phone running again.
Go here http://m.youtube.com/watch?v=xWmnHwkDrKk but first type adb devices in cmd. If it shows ur HTC type adb shell and and type mount sdcard next to the "#" once it appears although you should be using the fastboot shell not adb commands.adb should only work on a powered on device or you can use fast boot in cmd while phone is in fastboot not recovery(you did say the phone can go into fast boot right?). Just make sure you got the right drivers and both fast boot and adb. You should get Koush's Universal drivers from my previous post since some phones have multiple drivers and MAY cause problems with cmd. Also HTC one S doesn't have expandable storage correct?
Sent from my ZTE_N9511
Wow. Now I incidentally soft bricked my phone again if you would believe it and nothing works this time.
Have you been able to fix?
Sent from my ZTE_N9511
Okay, i forgot to write but adb and fastboot are working on my Mac. I use the Mac because Win 8.1 has the known driver problems.
I tried a lot now, but i recognized maybe the main problem. My phone is still S-ON in bootloader. For sure thats the problem. Do I need to get rid of it and how do I do. The tutorial i used hasn't mentioned this step, maybe the person was still S-OFF.
The first thing i try now is to flash the original recovery, lock the bootloader and execute the original signed RUU to get back the original software first. Im going on holiday on tuesday and it would be a pitty without the phone. When I get it working i will leave it, and thy it again, when I'm back. Otherwise.......****
Use this tutorialhttp://htc-one.wonderhowto.com/how-to/fix-soft-bricked-htc-one-by-flashing-new-rom-via-adb-0154361/unless its the one you used already. From boot loader you were supposed to have gone to fastboot.boot loader has to be unlocked.From fast boot you flash TWRP.IMG which happens to have a special adb side load feature under advanced options. There you upload another ROM and kernel.here is the full list of supported devices as I don't know what variant or carrier you havehttp://teamw.in/twrp_view_all_devicesAlso, a stock kernel is optional but it always seems to fix my problems.
Sent from my ZTE_N9511
Thank you. But I already did it like this. The issue is, than after using sideload successfully the installation fails because of the known "unable to mount storage" text. And i don't know what to do wrong.
Like I already said, my phone is still S-ON, but can this make a difference?
Now i got it to bring the stock ROM running again, and as I'm on holiday for a few days I'm happy it is working again.
But one thing is left. It seems like there is no 3G/HSDPA connection now, only EDGE. I dont know what went wrong. Did you hear about this problem.
By the way, my phone is the standalone version whithout any provider.
Search the forums about edge only. There is a huge thread on this.
Has anyone looked into the at&T variant yet? I'm having troubles getting into the bootloader and into stock recovery. I want to unlock so I can test whether anything for the h901 works with the h900 ( and eventually get on stock 6.0. This DPI is driving me nuts). I've tried all the button combos I've read and could think of, and adb reboot bootloader just reboots back into Android. I don't think AT&T is pulling what Verizon is, since I have the 'OEM unlock' option in dev options. So, there's gotta be some way to do it... Hopefully we can get this guy figured out
T get to stock recovery I used a trick we had to use for the OUYA. I send an "Alt+Sysrq+i" command with a keyboard via OTG, on boot at the LG logo. Holding "alt+sysrq" then tap "i" 5 or 6 times and it will load into recovery. I was hoping once there I could do something like "adb/fastboot reboot booloader". But couldnt get adb to see the device. I think there is some auto repair script that's running, hard to tell since there is no feedback on the screen other then the recovery icon. But after 3-4 minutes it reboots goes through the "app upgrade dialog".
For the EOM unlock option, I noticed that it never does actually check in the box after you select "enable". Maybe look at the log cat and see if we can find some app/process messing with it?
Haven't opened the thing up yet, but maybe see if we can throw some commands at it while its in recovery via UART pins with serial to usb (bus pirate)?
I have successfully booted into download mode but unfortunately ADB and Fastboot dont work. I did also manage to get into the factory reset screen with the hard buttons. I am backing up my phone right now and gonna see if maybe it'll take me to recovery instead of actually wiping the whole device. Maybe even check if ADB works on the screen I will share my findings once I've made sure it won't harm anyones device doing this.
I just realised I have a fresh install on laptop and my ADB might be the older version cause it was downloaded from synaptics manager. I'll be home later this evening and ill mess around with it. I am downloading android SDK tools for Linux right now so lets hope thats what it was.
sharky481232 said:
I have successfully booted into download mode but unfortunately ADB and Fastboot dont work. I did also manage to get into the factory reset screen with the hard buttons. I am backing up my phone right now and gonna see if maybe it'll take me to recovery instead of actually wiping the whole device. Maybe even check if ADB works on the screen I will share my findings once I've made sure it won't harm anyones device doing this.
I just realised I have a fresh install on laptop and my ADB might be the older version cause it was downloaded from synaptics manager. I'll be home later this evening and ill mess around with it. I am downloading android SDK tools for Linux right now so lets hope thats what it was.
Click to expand...
Click to collapse
How'd you manage to do that? I've tried a combination of buttons, but nothing.
RobertVanHagar said:
How'd you manage to do that? I've tried a combination of buttons, but nothing.
Click to expand...
Click to collapse
Download mode - power off device completely, hold down volume up and plug usb in to PC.
Factory Reset - power off device, hold down volume down, hold down power and let go of power button once LG logo comes on but hold volume down, it'll reboot twice I think and then take you to factory reset screen.
sharky481232 said:
Download mode - power off device completely, hold down volume up and plug usb in to PC.
Factory Reset - power off device, hold down volume down, hold down power and let go of power button once LG logo comes on but hold volume down, it'll reboot twice I think and then take you to factory reset screen.
Click to expand...
Click to collapse
Really hope you find the work around. Alot of people say at&t isnt going to allow rooting of new devices.......if theres a will theres a way!good luck
no updates?
I have this h900 but when looking for the 10f update, in the update center,it shows that im in the latest version, im in 10d and afaik there are some people with the 10f version that fixed the finger print scanner.. How to get this update?
betovanbuuren said:
I have this h900 but when looking for the 10f update, in the update center,it shows that im in the latest version, im in 10d and afaik there are some people with the 10f version that fixed the finger print scanner.. How to get this update?
Click to expand...
Click to collapse
I have the same problem with my AT&T H900. I'm on 90009e and wanted 90010f. AT&T Tech support couldn't get it to upgrade either which I find very odd. We really need some phone mastermind to unlock the secrets of the AT&T LG V10 H900. I'm unable to get it into download mode or unlock the boot loader either.
Thanks,
Silver
professorpoptart said:
T get to stock recovery I used a trick we had to use for the OUYA. I send an "Alt+Sysrq+i" command with a keyboard via OTG, on boot at the LG logo. Holding "alt+sysrq" then tap "i" 5 or 6 times and it will load into recovery. I was hoping once there I could do something like "adb/fastboot reboot booloader". But couldnt get adb to see the device. I think there is some auto repair script that's running, hard to tell since there is no feedback on the screen other then the recovery icon. But after 3-4 minutes it reboots goes through the "app upgrade dialog".
For the EOM unlock option, I noticed that it never does actually check in the box after you select "enable". Maybe look at the log cat and see if we can find some app/process messing with it?
Haven't opened the thing up yet, but maybe see if we can throw some commands at it while its in recovery via UART pins with serial to usb (bus pirate)?
Click to expand...
Click to collapse
Hmmm that's wiered because mine has stayed checked since I got the phone,although I don't t think it matters since it isn't unlocked. What's funny is i don't know why you can check it if bootloader is locked, I'm still lost on that one .
kotafoxx said:
Has anyone looked into the at&T variant yet? I'm having troubles getting into the bootloader and into stock recovery. I want to unlock so I can test whether anything for the h901 works with the h900 ( and eventually get on stock 6.0. This DPI is driving me nuts). I've tried all the button combos I've read and could think of, and adb reboot bootloader just reboots back into Android. I don't think AT&T is pulling what Verizon is, since I have the 'OEM unlock' option in dev options. So, there's gotta be some way to do it... Hopefully we can get this guy figured out
Click to expand...
Click to collapse
This has been asked and answered here
How to get into stock recovery
1) Enable USB dubugging
2) Plug phone into computer
3) Set USB connection type to MTP
-Now the "USB debugging connected" notification should appear.
4) Entering "sudo adb reboot recovery" into the terminal will reboot you into the stock recovery.
Note: Entering "sudo adb reboot bootloader" will only reboot your phone...
Using: at&t LG V10
Model Number: LG-H900
Android Version: 5.1.1
Build Number: LMY47V
Computer OS: Ubuntu 15.10
I was able to root an LG escape2 with this method. You can communicate and push files to your phone through the download mode without technically using adb. Any chance a method like this would work?
http://androidforums.com/threads/gui...2-2015.937446/
in case you are subscribed to this thread go here..... http://forum.xda-developers.com/att-lg-v10/general/root-lg-h900-real-tot-make-tungkick-t3336317/post65864734#post65864734
Yup, rooted on my Att V10 with xposed, adaway, flux, removed bloatware and titanium backup.
Worked pretty smooth as well.
Link to the thread on XDA
http://forum.xda-developers.com/att...e-tungkick-t3336317/post65870954#post65870954
jiggajatt said:
Yup, rooted on my Att V10 with xposed, adaway, flux, removed bloatware and titanium backup.
Worked pretty smooth as well.
Link to the thread on XDA
http://forum.xda-developers.com/att...e-tungkick-t3336317/post65870954#post65870954
Click to expand...
Click to collapse
Excuse me, what's flux?
manny18pr said:
Excuse me, what's flux?
Click to expand...
Click to collapse
http://techcrunch.com/2016/03/15/popular-blue-light-reducing-app-f-lux-arrives-on-android/