Related
yo. a few Qs:
1. can I flash the rom on this to one of the roms here with WM6.1?
2. using the default rom, I am trying to tether via bluetooth. A am able to tether via usb cable fine. I dont believe there is a bluetooth serial port profile for this verizon version of the vox, is there a way to enable it via the registry?
Thanks
doesnt seem like anyone knows the answer to these questions, i have tried posting them elsewhere and no one replys there either. can anyone at least answer the bluetooth question?
If it is a Vox then it should be possible to flash all ROMs here. You just have to do the USPL! Look around in the forum, you should find all information you need. Also consider the wiki!
there is a registry hack somewhere on the forum for the serial port profile. I'll update this post later when i find it.
Isn't SMT5800 a CDMA device?
All ROMS here are for the GSM version i guess.
But the Docs 6.1 ROM does not have the Radio. So in theory you should be able to flash it, but I am not sure.
You should ask this to any ROM cooker.
frauhottelmann?
oh frauhottelmann you posted on this.
It came after i posted the reply.
Hm if it is CDMA then I don't know about flashing. The problem is that it might need other drivers. We need more information if it uses the same chipset, which I doubt!
It has a faster processor MSM7500 (400 Mhz)
It has a different phone controller than S710.
SMT5800 has Qualcomm MSM7500
S710 has TI TMS320C54x
and it does not have Wi-Fi.
prajith said:
It has a faster processor MSM7500 (400 Mhz)
It has a different phone controller than S710.
SMT5800 has Qualcomm MSM7500
S710 has TI TMS320C54x
and it does not have Wi-Fi.
Click to expand...
Click to collapse
I guess Alphafox you should forget about the flashing!
There should be a forum for SMT5800 somewhere..
thanks for the replys guys, I dont think any of the roms here will work as this phone is indeed CDMA.
what I would really like to get to work though is setting up the bluetooth so I can get online from my laptop through the phones data connection. I have the unlimited data and have been able to get it to work via a usb cable. I was reading on here and I guess there is a way to turn that function on but I dont think it works with smartphones? can someone point me in the right direction?
this is the thread I was looking at, it doesnt seem to work though..
http://forum.xda-developers.com/showthread.php?t=333762&highlight=vox+modem+bluetooth
anyone have any ideas?
I have tried a lot to make bluetooth networking work. but with no success
with this phone? is it a lost cause?
you could try and maybe you could make the hack work.
but i could not make the vox work as bluetooth modem.
internet connection sharing is a huge advantage though.
so is wififofum.
Alphafox said:
2. using the default rom, I am trying to tether via bluetooth. A am able to tether via usb cable fine. I dont believe there is a bluetooth serial port profile for this verizon version of the vox, is there a way to enable it via the registry?
Thanks
Click to expand...
Click to collapse
I don't know about your first question but I found this on Verizon's website...
Verizon Website said:
*The VZW SMT5800 supports the Wireless Headset, Handsfree, A2DP, Serial Port Bluetooth Profiles. It does not support all Bluetooth Object Transfer (OBEX) Profiles. See Bluetooth for details.
Click to expand...
Click to collapse
Oh and the SMT5800 is NOT a vox, it is a libra
No, not a ROM flash: I want to completely erase every last piece of data in my Tilt and install the SPL, OS, and radio from scratch.
As far as I can tell, FrankenKaiser will do that, but it (in theory) only works with the radio from hell... which I have, albeit the "_patched" version...
I am trying to work from a clean slate, rather than flash another ROM... trying to clear up a problem that I think can only be fixed by such a drastic move... and of all the posts I've seen, (unless I'm retarded - quite possible) none has addressed such a move. Is FrankenKaiser the solution? If so, do I need to put the radio from hell on first? If it's not the solution, what is? Or is there one at all?
Thank you
drunkbastard said:
No, not a ROM flash: I want to completely erase every last piece of data in my Tilt and install the SPL, OS, and radio from scratch.
As far as I can tell, FrankenKaiser will do that, but it (in theory) only works with the radio from hell... which I have, albeit the "_patched" version...
I am trying to work from a clean slate, rather than flash another ROM... trying to clear up a problem that I think can only be fixed by such a drastic move... and of all the posts I've seen, (unless I'm retarded - quite possible) none has addressed such a move. Is FrankenKaiser the solution? If so, do I need to put the radio from hell on first? If it's not the solution, what is? Or is there one at all?
Thank you
Click to expand...
Click to collapse
This is possible, but why?
After you wipe your phone you will be re-flashing the ROM / Radio and SPL anyway.
If you do do this, make sure you read and understand the process (and what the pre-requisites are first).
Ta
Dave
Install Sleuth's V_3.0 WM6.1. I have moddified a version with Jocky to work with that OEMSBL version.
I will PM you with a link for the moddified FrankenKaiser, hey that sounds familiar, ohh yeah, Jocky let me name it!
HOWEVER, I think I'd try a few other things first. Like check the Radio Protocol. On boot does the red protocol version end in H or W? W is not for US & can create issues with 3G. Also, you can try using MTTY with my G3SPL MFG_SPL to fomat a few thing & to flush out Nand blocks. Many things to try before venturing to FK. I know you PM'd me, but I've been a wee bit busy, I'll make a little time if I can help though. Try me on MSN/Live Messenger [email protected] (Even if it says "Offline" give it a try, I may just be lurking)
Protocol ends in H, currently using the Neon 1.58.25.17 radio, I have tried virtually every other 6.1 radio in existence, and about a dozen different ROMs, including the stock AT&T and letting the bloatware install just for poops and giggles. But not the one that you suggested GS, what the hell, one more ROM flash ain't gonna hurt...
I am reticent to think it's a hardware issue because the G and H icons do appear, I just can't get a connection, and it all happened while using the GPS (LiveSearch and HTC GPS Tool specifically). If it was hardware related I would imagine that I wouldn't get the icons, it would just show no service.
Also, the reason I wanted to do a complete whitewash is because, even when installing a new ROM, I have noticed that certain traces and settings remain from days gone by (certain registry settings, POP3 accounts, etc), which I find odd.
I would be interested in the MTTY approach, a link would be appreciated... running out the door now to go play bar manager...
Sorry GS, didn't wanna seem impatient, just trying to get a wider input as to a solution, so I can (a) fix mine and (b) maybe suggest to others (a bunch from what I've seen, here and elsewhere) with the same problem, rather than everyone sending them to AT&T / HTC for replacements.
Personally, I think that the 3G issue is some corruption somewhere in the phone's firmware that a ROM/radio/SPL change doesn't affect, and - as much as I hate to invoke such people - the guys at AT&T that looked at it believed the same, didn't think it was an antenna issue (although the widespread belief is that it IS, and furthermore that anyone working at AT&T is a dolt - which IS usually the case). Far be it from me to be naive, but one would think that if this was as widespread a problem as it is and was hardware related that there would be a recall, which there hasn't been.
Again, thanks to everyone for their assistance.
So, I guess the next question is... how do I use MTTY to, as GSLEON suggested, flush out the bad blocks?
Again, thanks in advance to anyone who can help me.
go ahead and read up on this post. It will explain everything for you...
http://forum.xda-developers.com/showthread.php?t=371154&highlight=MTTY
drunkbastard said:
No, not a ROM flash: I want to completely erase every last piece of data in my Tilt and install the SPL, OS, and radio from scratch.
...
Thank you
Click to expand...
Click to collapse
You could try this: http://en.wikipedia.org/wiki/Neutron_bomb
No seriously, which way do you flash a rom ?
Just flash and basta? Flash and HR after that ? Have tryed with a different computer /os ? From SD card ? I had some reminiscent traces of previous roms if I didn't hard resetted after the flash.
Dredd67 said:
You could try this: http://en.wikipedia.org/wiki/Neutron_bomb
No seriously, which way do you flash a rom ?
Just flash and basta? Flash and HR after that ? Have tryed with a different computer /os ? From SD card ? I had some reminiscent traces of previous roms if I didn't hard resetted after the flash.
Click to expand...
Click to collapse
Thought about it, but motherf*%$# Al-Qaida has made getting my hands on one so difficult.
I flash from a WinXP PC, have not tried another one because this is the only one I can get my grubby little hands on, flash / HR. Have not tried from SD card. I have had traces of old ROMs as well - I tired using PDAUltimate v6 and still had the splash screen from Garmin 4.4c... odd... that and other incidents of remnants of ROMs gone by.
You may want to check here and see if there is anything that may apply. (This is coming from someone that had a 3G failure.)
http://forum.xda-developers.com/showthread.php?t=400610&highlight=JohnJonsten
drunkbastard said:
I am reticent to think it's a hardware issue because the G and H icons do appear, I just can't get a connection
Click to expand...
Click to collapse
Well, that IS the usual behavior when the radio hardware goes poof, many people including myself experienced it. In the end GPS failed too on mine, as well as the GSM radio, and the phone was always running hot and draining batteries extremely quickly.
See the link posted by John.
The quick and dirty of it is....
1. The Icon lighting up means the radio and protocol is correct to talk on the correct 3G bands in your area
2. From what I have been able to gleen on how the 3G signaling works (not an expert here) it is basically GSM signaling for the UMTS/HSDPA Voice/data path buildup.
3. It is most interesting to go to an area that has non PCS band 3g, use field test to verify this if you want, you can lock your phone on edge and use voice and data 850, but will not be able to build up a UMTS/HSDPA connection on 3G. You need to go to a non PCS area as I have seen for the most part in Seattle they run the edge net on 850 and 3G on PCS frequencies.
kilrah said:
Well, that IS the usual behavior when the radio hardware goes poof, many people including myself experienced it. In the end GPS failed too on mine, as well as the GSM radio, and the phone was always running hot and draining batteries extremely quickly.
See the link posted by John.
Click to expand...
Click to collapse
Hi,
I am on a mission today, to upgrade my phone. Currently I have Windows Mobile 5.2.21812 and its very unstable.
I know nothing about flashing these, as I bought the phone from EBAY not knowing it had Windows Mobile 6.5 on it.
I notice reading in the forums, I need to know if its CDMA, or GSM etc ? How would I tell that please? Phone is HTC Touch Pro.
Many thanks.
Stevey G
steveyg said:
Hi,
I am on a mission today, to upgrade my phone. Currently I have Windows Mobile 5.2.21812 and its very unstable.
I know nothing about flashing these, as I bought the phone from EBAY not knowing it had Windows Mobile 6.5 on it.
I notice reading in the forums, I need to know if its CDMA, or GSM etc ? How would I tell that please? Phone is HTC Touch Pro.
Many thanks.
Stevey G
Click to expand...
Click to collapse
If your phone has a SIM Card Slot then its a GSM Model. If it has no SIM Card then its CDMA.
Ohhhh I see Thank you ever so much.
Would this be the right ROM to use - just making sure, before I start to read all the instructions ..............
http://forum.xda-developers.com/showthread.php?t=536751
You didnt say what phone you have - so we cant tell!
If you have a GSM phone (sim card) then you want to start reading here If however you have a CDMA phone (no sim card) then here would be a good place to look
Beeble said:
You didnt say what phone you have - so we cant tell!
If you have a GSM phone (sim card) then you want to start reading here If however you have a CDMA phone (no sim card) then here would be a good place to look
Click to expand...
Click to collapse
I did, if you read my first comment above, look at the end you will see HTC TOuch Pro
Anyway.........
I notice several things I don't understand - RADIO, UC Capable & SPL Version as found here....
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_Cooked_WM6.5_ROMs
Could someone explain please?
Anyone able to assist ?
steveyg said:
Anyone able to assist ?
Click to expand...
Click to collapse
Steveyg, Touch Pro's are CDMA too. No one wants to help you if you're going to brick your device. Are you GSM or CDMA? We will assist as much as possible, but help us by answering that simple question.
Ohhh I understand now
Mine is a phone with a SIM, thus GSM is that correct?
steveyg said:
Ohhh I understand now
Mine is a phone with a SIM, thus GSM is that correct?
Click to expand...
Click to collapse
Yep, you should be good to go. Now,
steveyg said:
I notice several things I don't understand - RADIO, UC Capable & SPL Version as found here....
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index...ked_WM6.5_ROMs
Could someone explain please?
Radio is comparable to something like your WiFi card in your laptop. Depending on your location, etc, some radios are better than others. They control your signal, GPS, WiFi, etc. The most used one that I've seen is 1.14.25.35
UC Capable is something you need when you start cooking. If you're new to the Raph, you probably don't need this info yet.
SPL is the most important. Since you bought your device pre-flashed with 6.5, is should be hardSPL. This helps prevent your device from becoming an expensive paperweight. Now, it helps, but doesn't guarantee. If you put your device into bootloader (hold vol-, hold power, and reset with stylus) your device at the top of your screen should say something like SPL-1.90.Olinex. This means it's hardSPL and you are able to flash custom ROMS, like the NRGZ28 ROM you linked to. As long as they are GSM you should be able to flash any ROM for the GSM Touch Pro.
These are the basics so just keep reading the wiki. I will answer any questions I can, so just shoot me a PM if needed
Hey, if you want to flash your Raphael, I'd recommend you read this
I did my first, regardint this thread, and actually worked, really simple if you ask me!
Some suggestions: Leave the radio, for first, just do a simple ROM flash, and after that if you find it nessescery you can do it later.
The only ROM I tried for my Raphael is TAEL's ROM, it's amazing compared to the stock ROMs!!! If you're intrested click on it in my signature!
I have the following ROM;-
r:- 1.11.25.01
g:-52.58.25.30u
d 5. phoenix
Do I have to revert to a OEM ROM? If so, where do I find those please?
Good news, I've been sucessfull Phoned imaged to TAEL Roms - very good.
Could of questions;-
1. Don't have the sat nav the other image had. Can't remember the name of it. but I used to use that quite alot. Does anyone know where I can download it from?
2. Used to have an application called FLASHLIGHT - great little app. Its a TOURCH application that used the FLASH Light. Really handy. Where can I download it please.
Many thanks.
Stevey G
1) are you talking about the garmin or tomtom gps software? or the one where you use the GPS to lock down a location (kinda like "dude where's my car?" app for the iphone)
search on the forums under software development subforum. it's called Torch.. that or NueLight.
Thanks I managed to find the torch light thing, but still can't find the sat nav. Not sure what the name was. It was really good though. Wasn't the tom tom navigator. Wish I made a note of it, as it was fully working version :-(
are you talking about the GPS navigation software? if so then it's either garmin (mobile XT) or tomtom
Hi,
Looking on my storage card Managed to find the name - AUTO MAPA. Tried to load it from the storage card, and it works. So I have copied the exe to the start menu, multimedia folder and it works great
Whats this GARMIN Mobile XT like then?
Since updating to TAEL Rom, my signal is very low and keeps disconnecting from the network.
Do I need to upgrade my RADIO then?
My version is;-
1.11.25.01
I found this one, would this work ?
http://www.4shared.com/file/133094257/1e1ce983/BlackStone_Radio_1172509.html
try testing other radio. I changed my radio to the new ATT official rom (not so new anymore but it was the latest updated ATT rom). Test it out for a few days each and map out what you think works best and keep to that.
One thing I noticed is that some radios will crash your phone after a call.. they may give you better signals, but it will crash your phone, so be aware of that.
Hi,
Thanks for the message. Does it matter that I am on TMOBILE and not ATT ?
whenever I run android on my phone I get no service. obviously I have an HTC touch pro 2 that is completely stock and my sd card has nothing else on it besides the android program I installed.
Wifi NOT Turning on...
I have a Qualcom 7600,
I have a Installed an Energy Rom cooked Nov. 10, 2010
I have installed Android using the Sep. 6, 2010 cab, then added the updated rootfs and startup.txt, initrd.gz & system.ext2
as explained at:
RhodiumAndroid#For_CDMA_Version
Can't place the entire link 5.4 from the wiki for Android for CDMA
Android Boots, but Wifi is stuck trying to turn on
I live in the Cayman Islands In windows mobile I can make calls with my sim card but not in Android what am I doing Wrong.
Help! Anyone anyone... Assistance Anyone.. anyone
where are the android roms?
hi...
my sis is sending me her Touch Pro 2 on sprint.
i was looking to put android on it...
where are the android roms at???
did a search.. found nothing.
fwi... i have hero.. rooted and cm6 froyo
Hey Dan, You have to look in the Touch Pro 2 Section under Android Management. Here's the link to save time.
forum.xda-developers.com/showthread.php?t=627997
Not everything works yet, the big things are Bluetooth, camera, and the keyboard lights. Otherwise most works and it's great!
Please make sure to read the FAQ's and search before you ask questions because a lot can be solved with the search option. If nothing else, send me a PM. I have the Sprint TP2 activated on Boost Mobile and running XDAndroid so hopefully I can help. Good Luck!
aoastill, check out these FAQ's and see if any of that will work. If not, we'll take it from there.
I'll just assume you're running XDAndroid?
http://sites.google.com/site/androidport/faq
tundemcdonald, I have had problems when my SIM card was in. I had to take it out for everything to work. it shouldn't affect your WIFI though. Check out the FAQ's I posted before and you should be able to get it working. You also need to get an update because they have updated since when you got yours. Hope this helps!
minikirchner said:
Hey Dan, You have to look in the Touch Pro 2 Section under Android Management. Here's the link to save time.
forum.xda-developers.com/showthread.php?t=627997
Not everything works yet, the big things are Bluetooth, camera, and the keyboard lights. Otherwise most works and it's great!
Please make sure to read the FAQ's and search before you ask questions because a lot can be solved with the search option. If nothing else, send me a PM. I have the Sprint TP2 activated on Boost Mobile and running XDAndroid so hopefully I can help. Good Luck!
Click to expand...
Click to collapse
thanks man.. could not find it.
now... i have the HTC Hero which has android....
the TP2 looks like it has the same hardware specs...cpu and memory.
difference..
Hero has bigger camera
THP2 has bigger screen and keyboard.
I had thought the TP2 had better cpu and memory.. I was wrong. I am having issues.. with the Hero lag and performance.
will there be any benefits with android on TP2??
Dan330 said:
thanks man.. could not find it.
now... i have the HTC Hero which has android....
the TP2 looks like it has the same hardware specs...cpu and memory.
difference..
Hero has bigger camera
THP2 has bigger screen and keyboard.
I had thought the TP2 had better cpu and memory.. I was wrong. I am having issues.. with the Hero lag and performance.
will there be any benefits with android on TP2??
Click to expand...
Click to collapse
To be honest, what the developers are doing is incredible, but I'd prefer to have the stock android phone. Idk if it's the sense of comfort that it's "official" or what.
The only benefits I can think of is the customizations. Such as overclocking, and all that stuff. The problem with it is it's obviously a work in progress, so you won't have the camera, bluetooth, etc. I know that's been a problem for me lately. I need the camera quick and when I get my phone out, I remember it doesn't have a camera But I think you'd be happier with the stock one compared to XDANDROID. But for the phones that don't have Android, it is wonderful.
And to comment on your statement about the RAM and processor. They both have the same processor and amount of RAM. The Hero has a better camera, but otherwise, everything is bigger and better on the TP2. And I like the TP2's slide out keyboard
minikirchner said:
tundemcdonald, I have had problems when my SIM card was in. I had to take it out for everything to work. it shouldn't affect your WIFI though. Check out the FAQ's I posted before and you should be able to get it working. You also need to get an update because they have updated since when you got yours. Hope this helps!
Click to expand...
Click to collapse
So what you are saying is that there's no way to use a cdma tp2 (sprint version) in gsm mode (as my carrier is orange dominicana so it is gsm only ) on android? I tried android once and I could not get signal, but I thought it had something to do with the fact that I didn't look too much into the configuration I just wanted to see how it performed. if that's so then I think I won't be using android on my tp2 as it is my main phone now and without gsm support (as of now, ) it serves for testing purpose only, anyways the devs are doing a greeeeat job, I'm sure it'll improve over time.
elander said:
So what you are saying is that there's no way to use a cdma tp2 (sprint version) in gsm mode (as my carrier is orange dominicana so it is gsm only ) on android? I tried android once and I could not get signal, but I thought it had something to do with the fact that I didn't look too much into the configuration I just wanted to see how it performed. if that's so then I think I won't be using android on my tp2 as it is my main phone now and without gsm support (as of now, ) it serves for testing purpose only, anyways the devs are doing a greeeeat job, I'm sure it'll improve over time.
Click to expand...
Click to collapse
No, that is not what I mean at all. We just have to figure out why yours isn't working. So I can understand what setup you have, do you have the startup utility in windows to boot into Android? Or are you going and opening haret.exe? If you are using the startup utility, go into the settings and make sure CDMA, and N. Am. Dial are checked off.
Also make sure you have the latest rootfs. Go to this site, http://files.xdandroid.com/rootfs/ and download the latest one. Rename it as rootfs.img and copy it to the andboot folder on your SD card. It'll replace the old one and that has the latest stuff in it. Give all that a try and see if it doesn't work then.
minikirchner said:
No, that is not what I mean at all. We just have to figure out why yours isn't working. So I can understand what setup you have, do you have the startup utility in windows to boot into Android? Or are you going and opening haret.exe? If you are using the startup utility, go into the settings and make sure CDMA, and N. Am. Dial are checked off.
Also make sure you have the latest rootfs. Go to this site, http://files.xdandroid.com/rootfs/ and download the latest one. Rename it as rootfs.img and copy it to the andboot folder on your SD card. It'll replace the old one and that has the latest stuff in it. Give all that a try and see if it doesn't work then.
Click to expand...
Click to collapse
Thanks, i'll try that, (although I have a version that is about 2 weeks old, so maybe outdate issues can be ruled out, lol) I think that I checked the cdma thing when I tried it mainly because I have heard that in WM if you go gsm on a cdma phone you'll brick it so I didn't want to take any chances, next time I try I'll make sure to check off the cdma box, I'll give it a try later and will come back to report, I'm such a noob...
Hey you're doing fine. I have the CDMA version of the TP2 and I had a lot of bugs to work out. I guess it's tougher to get it working on that than a GSM phone. I still feel like I have no idea what I'm doing lol.
Sent from my MSM using XDA App
Anybody know any patch who really make work the wifi d hoc connections on any of the roms available until now???
When i try connect nothing happen, in the wireless ad hoc networks marked with a * on the network list.
Sorry by poor English, and thank you community.
Which ICS ROM are you using? Is it stock?
I have tried ALL ICS roms available on the Development area, but until now, anyone developer have take a look at this, only in the Bluetooth tethering, who dont work for me cause i use a Nokia 5800 to provide Internet to my Xoom.
dupaar said:
I have tried ALL ICS roms available on the Development area, but until now, anyone developer have take a look at this, only in the Bluetooth tethering, who dont work for me cause i use a Nokia 5800 to provide Internet to my Xoom.
Click to expand...
Click to collapse
my friend there are a couple of threads already opened prior to yours asking the same question. Lets do a little better searching and maybe you should ask your question in one of their threads so we can centralize this issue. Believe me you are not the only one inquiring about this....
Thx