1. Pressing the Volume Up/Down button once will have the Volume Slider appear. Pressing it twice will have it appear, but muted. Is this built-in?
2. Sometimes when I soft key something, especially in messages, the resulting menu will auto-scroll down to the bottom. Why?
Ad.1 In my Vario it changes gradually, even if I press very quickly two times down it just moves 2 times down on a scale.
Ad.2 I've noticed that it happens when I press the soft-key quite long, probably the device already swiches to next menu and then 'thinks' it's a second press - because on the 2nd menu usually in the same place is an arrow that allows you to scroll down.
My question is - in portrait mode i have problems pressing left/right on the phone, the same in landscape mode - up/down. rotating the touchpad works great and moving up/down in portrait / left/right in landscape.
Is this a common problem? Or maybe it's not possible at all?
Normally I use the keyboard's left and right, but if I use the pad's it works fine as well... what exactly is the issue?
thehyecircus said:
1. Pressing the Volume Up/Down button once will have the Volume Slider appear. Pressing it twice will have it appear, but muted. Is this built-in?
Click to expand...
Click to collapse
I can see something similar:
pressing the Volume Up/Down brings up the volume screen (system/ring in normal mode or the in-call one during calls), and a second press hides it!
No chance to change the volume without touching the screen
seems to be fixes with S2U2 1.36 and these settings
Related
Right now when I press Volume up/down it brings me to volume control. However, another press brings me back to Today screen. Soft reset doesn't help.
I am using SPB Pocket Plus, AE Buttons and P.D.A.C Hebrew support (the last one is more recent).
AE Button doesn't touch the volume and I *guess* that the Hebrew Support is to blame but I don't see why it would happen.
Anyone saw such behavior? Any suggestions?
Hi all
I've had my Omnia for a few weeks now and love just about everything about it now that I've tweaked it to suit me. I've set up the M2D system and think it handles great.
There's just one thing that I'd like to change and I wondered if anyone may have found a solution for me. When you lock the keys/screen by pressing and holding the 'end' button, the volume buttons can still be used - I thought I'd switched my phone to vibrate mode and gone into a meeting but must have caught the volume button a few times because halfway through the meeting my phone started screaming out Paradise City by Guns N Roses at almost full volume when a call came in, which was very embarrasing!
Anyhow - if anyone knows of a way to also lock the volume buttons along with the rest of the hardware buttons and the screen upon pressing and holding the 'end' button, I'd really appreciate the details.
Thanks in advance.
just hold the NO button to lock all the buttons instead of using power button to lock the phone.
i found the way to stop that i had the same problem and all you need to do is go to "settings" then "buttons" then scroll right until you see "wake up" then check the last box!!!!!!
Using Froyo, the volume hard buttons on my Nook color are hardcoded to Back and Menu functions. I have looking for a way to add full-time volume softkeys OR find a way to make long presses on the volume buttons change the volume. Another option would be to have volume controls in the notification bar and keep the bar open all the time.
Button Savior has the ability to have full-time softkeys, but nothing for volume (that I know of).
Any ideas?
You could use ClutchPad for this. There's just one item on the screen, but you could set swipe up to be volume up and swipe down to be volume down.
Thank you. I got it to work, but it's a little slow and the up/down swipes are a little difficult to perform correctly. I don't know why it's slow to access the volume controls, but I think the swipe difficulty may be due to the Nook's screen edge sensitivity. Overall, though, I'm very happy to finally have a solution. Thanks again.
I make CyanogenMod 10 for my device. Official firmware - android 4.1.1. I have serious problems with the processing of pressing the power button and volume buttons.
When I press the power button, the phone starts to behave inappropriately. It appears when i try to unlock: not always the first time gets unlocked, you need a short press that the attempt was successful. And if you say I want to call the power menu, long clamp the power button and the phone will vibrate like crazy and there is a bunch of copies of windows power menu, you press back - phone go to the bootanimation ...
By the way with the volume button a similar situation! As is well known in the CyanogenMod is feature - volume buttons scroll through tracks. So if I clamp rocker to scroll through the forward / backward, flipping loops and skipped about 5-6 tracks!
In what could be the problem?
Surely someone had anything like that.
Sorry for my bad english)
As the title says. Does anyone know where I can set the volume slider timeout delay that comes up when you press the volume buttons? I assume it's in the build prop? Thanks in advance.
The issue I have is when holding the volume button in either direction. A single press of the volume button brings up the slider almost immediately [timed at 0:0039 seconds] (but doesn't change the volume). Once the slider appears, pressing or holding the volume button again changes the volume immediately. Once the slider disappears, it takes a moment to wait for it to re-appear after holding the volume button (+ or - makes no difference). In the last 2 times I've timed this, it takes 0:0106 seconds for the slider to appear.
I only started noticing this issue after upgrading to 190123. I can't confirm if it for sure occurred because of this update.
P.S.: I just noticed that when holding the volume button up or down with the screen off, the volume does not adjust. I have to tap press the volume button to turn it up or down each step. Is this normal as I haven't noticed this "issue" before?