Hi all
I've had my Omnia for a few weeks now and love just about everything about it now that I've tweaked it to suit me. I've set up the M2D system and think it handles great.
There's just one thing that I'd like to change and I wondered if anyone may have found a solution for me. When you lock the keys/screen by pressing and holding the 'end' button, the volume buttons can still be used - I thought I'd switched my phone to vibrate mode and gone into a meeting but must have caught the volume button a few times because halfway through the meeting my phone started screaming out Paradise City by Guns N Roses at almost full volume when a call came in, which was very embarrasing!
Anyhow - if anyone knows of a way to also lock the volume buttons along with the rest of the hardware buttons and the screen upon pressing and holding the 'end' button, I'd really appreciate the details.
Thanks in advance.
just hold the NO button to lock all the buttons instead of using power button to lock the phone.
i found the way to stop that i had the same problem and all you need to do is go to "settings" then "buttons" then scroll right until you see "wake up" then check the last box!!!!!!
Related
When my HTC pro is locked the both volume buttons still work.
Is there a way to disable these 2 buttons when my phone is locked, the should only work if the HTC pro is not locked!
How can I change this?
good question. I would like to know as well...
a friend of mine told me, htat the diamond has got the buttons locked in locked mode, too.
2 of my working partners have both a touch diamond and they both confirmed that the button keys are turned off when the phone is locked.
you guys should check out the sensor lock app, it's free and by a peep on here, it's pretty good
this app is quite cool (sensorlock), but we just want a simple lock of the volume buttons when the device is locked by the default procedure.
sensorlock does not what i want.
I just want the default lock in wm to lock the volume keys.
So if I press the "end call" and hold it down the phone locks, it should also lock the volume keys, the on/off button should NOT be locked!
More function I do not need for locking.
It would be OK if a app does the same with a software/sensor lock function, but important is that it is enabled by long press of end call button.
Sorry no answer to your question but I agree: the fact that the volume buttons are not locked is really annoying!
volume buttons not locked
They are locked on my original Dutch T-Mobile Rom.
(and yes, I've checked that)
On my vodafone rom not, I am now runnin romeos and on this rom there are also not locked.
Note: we are speaking here about the default lock of the OS, NOT the sensorlock! So holding down the "end all button" for approx 2 seconds. The phone now locks itself and display is dimped, now all keys execpt the on/off and volume keys are locked. What I want is that volume keys are also locked.
It is possible to lock the volume keys using apps such as sensorlock, but this lock does not work with the end call button, you must rotate the phone of use the stylus to (un)lock it.
tis true. when locked, volume buttons work. when display is off, they do not
3 Australia Rom also comes with this problem. It would be interesting to know how they fixed it in the T Mobile Dutch rom.
install this: http://forum.xda-developers.com/showthread.php?t=412418
works great!
I use this programm :
AnswerkeyDisabler
Before i tried S2U2.
ppa.peter said:
install this: http://forum.xda-developers.com/showthread.php?t=412418
works great!
Click to expand...
Click to collapse
Not really, it does not what I ask
I just want: lock using hold own end key, all keys (including volume) are OFF.
This tool does not do this, if I set is using wm in lock modus the volume keys still work, all other options are not for me...
It is great that people suggest which tools to use for locking but please only suggest a tool which locks does exactly as I ask.
If anyone Finds an answer to this I would love to know as well!
yeah kinda of a big problem. I lock the phone. Put it on vibrate or silent and put it in my pocket. because of the location of the keys, it sometimes increases the volume. Quite annoying since use an mp3player where i go, i don't hear my phone (thats why i prefer to use only vibrate).
Turning the display off is a workaround that helps a bit.. but that button also works when locked (not weird ofcourse)
Nevermind, I've found the best way to get past this is after locking the phone (by holding the end call key) if you press the power key and release it puts it into "Sleep Mode" and turns off the screen. After this the volume keys cannot be used unless you press and release the power button to wake it up.
Seems to cure my problem.
any person can help me how enable volume buttons when device is locked ?
rom: ROMeOS ver.1.70.3
I have an HTC FUZE and I dropped it in a puddle of water and now the power button is constantly activated even though I am not touching the button. The button still clicks fine but again, the power button is always active. I cannot manually put my phone to sleep, nor can I turn it off using the power button.
My question is, could I remap the power button (long and short) to another button say the PPT button?
thanks
help anyone?
I had a similar problem with my first Fuze and had to get a refurbished replacement from AT&T. In my case the sticking power button caused constant rebooting of the phone. Probably not what you wanted to hear, but I was unable to do anything to unstick the button.
if the power button is just nt working, you can still put your phone to sleep with third paty softwares like psShutXp. But I don't think it is possible to remap it to a different hardware key afaik.
Regards,
Carty..
Ok, the story is, my phone goes to sleep every 30 secs to save battery. And since I'm still very excited about it, I turn it on quite often, just to check . And the only way to turn on from sleep (as far as I know) is pressing the power button. Well, that means that button will be pressed a lot! I'm just worrying that it will soon have problems. It would be much cooler if we can touch some Android button down there, Home button for example, to turn on the phone. Do you know anyway to do that?
PS: I tried to google as well as search through out this forum, but the keywords are pretty common, so it's really hard though.
I wouldn't want the capacitive buttons activating my phone, think of all the butt-dialing
I think Widget Locker allows for any hardware button to wake up the device, so then you'd be able to distribute the fun between your volume rocker and the power button.
Widget locker does allow the use of the volume rocker to wake up the phone.
a short term fix or you might be to got o settings-->Applications-->Development-->Stay awake....
so as long as you are charging the screen will not sleep. dont forget to change the setting back if you walk away for a bit... or go to bed
Thanks guy. I think the volume button is good enough
Rumur said:
Widget locker does allow the use of the volume rocker to wake up the phone.
Click to expand...
Click to collapse
thanks rumur, i going to give widget locker a try.
i hate it must reach for power button to wakeup!
i like "Simply Lockscreen", it also turns on cappy with volume buttons.
give it a try
On a similar note, do you all have any app tips that will allow me to do something special with the volume button while the screen is off (maybe long press or double click, or press both volume buttons at once) that will in turn toggle silent/vibrate on and off?
One of the down sides of having such a large screen is the amount of travel your finger has to do to get to the power switch to turn the display on.
is there a hack or an app that can allow me to customize the capacitative buttons (home, menu, back, search) to turn on the phone? (not from a power off state, but from a suspend state)?
Other potential solutions could be remapping either of the volume keys, or maybe using the accelerometer to determine the orientation of the phone and then wake up the screen.
Yes, I am looking for the same thing. The power button on Inspire is not that well designed. I can't really tell if i am pressing it or now. I am afraid the button will broke since it doesn't have the press down feeling. I think everyone has the same problem on this button.
I think only midgets and girls have this problem. Are you a midget or a girl?
lol jk
try widgetlocker
you can wake up phone with volumes button !
I make CyanogenMod 10 for my device. Official firmware - android 4.1.1. I have serious problems with the processing of pressing the power button and volume buttons.
When I press the power button, the phone starts to behave inappropriately. It appears when i try to unlock: not always the first time gets unlocked, you need a short press that the attempt was successful. And if you say I want to call the power menu, long clamp the power button and the phone will vibrate like crazy and there is a bunch of copies of windows power menu, you press back - phone go to the bootanimation ...
By the way with the volume button a similar situation! As is well known in the CyanogenMod is feature - volume buttons scroll through tracks. So if I clamp rocker to scroll through the forward / backward, flipping loops and skipped about 5-6 tracks!
In what could be the problem?
Surely someone had anything like that.
Sorry for my bad english)