While loading (plugged USB cable to USB port or charger) the screen goes black.
Can I prevent the G710 from switching off the screen while it's loading?
Related
Anytime I connect the power supply to the VDA GPS/Toshiba G710, the screen gets dark. I found that it is only dimmed.
Is there a way to quickly light up the screen to normal again in order to continue work with AC adaptor?
This is really annoying, so I need to stop surfing the web or so when I am charging the device
Maybe there is a keyboard shortcut in order to light the screen again...?
Is it possible to remove that big black screen with 1 button in the middle that appears as soon as i connect the usb cable ?
it would help to know what phone you have...
When tablet is connected to the keyboard dock it will not allow the screen to be turned on via the power button on the tablet (top left.)
Also it seems that some times when tablet is connected to the keyboard it sends it into the reboot.
There is no damage the ports, charging works fine in the tablet, and when connected to the tablet the keyboards charges the tablet and shows the battery level of both devices. Checked for dust or anything else in the ports, but all are clean, blew them out with AirDuster just to be sure.
Hi all
I Have a GT-N8000 today i worked with it some
and locked the screen.
after ye while when in press the power button the screen does not turn on
i Plugged-In the charger but no battery icon or Plug-In sound
i connected the tablet to a pc but no statement from pc for a usb device
i am very sad pls help me((((
Could be a dead battery or power button stuck .
No!
When i locked the screen it was 50%
and i plugged-in the charger from night to morning i don't think it is for battery
(No Download Mode-No Recovery)
Well if you say no then it could be the USB port fried or the mainboard .
PC - usb i presume you have swapped the usb cable and have installed Samsung drivers .
But when i plug in the charger after a while the device will be hot:|
Is the problem still form USB cable?:S
hello i need some help
is possible to startup system when connected to charger or usb cable (when device is off) ?
default runs battery charging logo.