I use salling clicker on my bluetooth enabled Nokia phone. It works fine, using the physical keyboard.
What are the options available for elf/elfin, given that these phones do not have a hardware keyboard/directional buttons?
Is there a:
1. a virtual keyboard/directional buttons that can be used in elf/elfin?
2. an add-on to salling clicker that will emulate keystrokes using touch controls?
3. an equivalent app, similar to salling clicker, that can be used on touch phones like the elf/elfin?
Apparently, I am not posting at the right board for this, but this certainly is not TRASH. I would appreciate it if this post can be moved to a more appropriate thread.
I am now using Bluetooth Remote Control from http://jaylee.org/RemoteControl/ , and recently discovered that this can be configured using a hardware keyboard, but a virtual keyboard would work as well, too.
what i am actually looking for now is a virtual keypad that looks like a remote control.
Below is a sample of the interface. I took the original interface from Vectir and edited it a little bit.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To further explain, pressing the UP volume control in the remote control interface above could be configured to send the keystroke for the letter "A", which could then be assigned in the bluetooth app to increase the volume. Not all the letters or numbers would be assigned to a button since the interface contains only 21 buttons, total.
I hope someone out there is interested to develop this interface or virtual keyboard.
Related
The OS is WM2003SE. At present when scrolling through Programs Folder or Games Folder using the D-pad the cursor moves left to right & will not go down or up until you reach the last program icon on each horizontal line.
Does anyone know a reg hack or program that will change the cursor to move up & down freely.
Hope you can understand what I mean ! quite simple issue really but not so simple to put into words.
Many thanks.
I don't this is really possible normally because of the way the listview is implemented in Programs. However, if you use VJSmallIcons II it will let you change the way the icons are displayed, and it might work then.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
V
Yes your app will allow me to scroll through my programs using the "list view".
Thank you.
I'm sure I saw a reg hack to adjust the D-pad movement, have searched on here & with google.
Thank god for forums like this & trusty google, WM would be junk without 3rd party experts correcting annoying bugs/problems.
Well another problem I solved with MortScript.
Wrote a script that allows me to use button 1 & 2 to scroll through my program list just when Programs is active.
Not as good as the cursor movement in WM5 but damn close.
With a few tweaks 2003SE is as good as WM5 for stylus free use & has some other advantage too.
BlueMusic is the software that will allow you to listen to music played on your WM2005 PocketPC or Smartphone with your Bluetooth headsets.
It's now easy to listen to your MP3s and many other audio formats, wherever you are with your Wireless Bluetooth Headset.
It's even easier to use BlueMusic together with Skype, or other VoIP software.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Music is wireless! The new 1.0.510 version comes with lots of new features:
The Smartphone version and the PocketPC version are now combined in one single version to make everything easier for the users
No need to press the Headset main button anymore, just pair the headset with your device, and press the Start button in the BlueMusic interface. The audio gets instantly redirected to the Bluetooth headset
For PocketPC users: 2 versions of the today plugin are available. Also, you can now disable the plugin and use the shortcut in Programs
For Smartphone users: improved graphics and functionality. BlueMusic looks even better now.
Trial version allows 40 seconds of audio instead of the 30seconds in previous versions
Supports both landscape and portrait, both QVGA and VGA, and also Smartphones with Landscape screen resolution
The new version can be downloaded here
But it is still NON-Stereo right???
Yes that's correct. The "stereo" feature would mean a bigger project and different releases for different devices. But it can be an idea for a different project. Thanks for your input
Cheers,
Raul
Hello,
I'm looking for software that would allow me to lock my HTC Touch under Windows Mobile Pro v6.1 as
TealLock under Palm OS
or
OmegaOne 1-Pass under Pocket PC 2003 (not compatible with WM5 and WM6):
Fast Password Entry
Using innovative technology, 1-Pass uses the physical buttons on your Pocket PC to allow you to enter your password.
In tests, entering a 4 digit password using the standard password program took 7 seconds.
With 1-Pass, entering a 6 button password took just 2 seconds.
If you don't like using the physical buttons to enter the password, 1-Pass offers an alternate password entry using the numeric buttons on the Pocket PC screen, like the standard password product.
The feature I was looking for is that I be able to unlock a combination of hardware button!
I also know that Throttle Lock exist, but with my aluminium hardcase, I do not have access to my touch screen rapidly like my hardware buttons.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you for your help!
Have you found a solution to this?
No
I'm still looking for a solution...
Someone have a magical trick?
Found a solution!
I was looking for something like this like crazy!
This application allows you to set up a combination of hardware buttons to unlock your device very quickly:
http://lockmymobile.com/warden.aspx
Have fun!
I was looking for a way to play Worms World Party, and I found this
http://www.samsung-omnia.org/software-development-b47/worms-world-party-keypad-emulator/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Worms World Party keypad emulator - a little program allows you to play Worms World Party on devices without a keyboard such as the Omnia II.
Install notes:
1. We move on keypad.exe device.
2. Run keypad.exe
3. Run Worms World Party from the folder / Program Files / Jamdat /
4. We go into the settings and configures the knopkina fire (fire), jump (jump) and flip (flip) (X button is used to exit).
5. Play and enjoy!
Display Resolution: WVGA (480x800)
http://www.4shared.com/file/136214398/c541444/Worms-20World-20Party-20keypad-20emulator.html
Click to expand...
Click to collapse
apparently this works on the Omnia 2, but when I try it with my HD2, the keypad application does not seem to work
did any of you guys try this before??
the whole keypad doesn't work for me either, we seriously need a working virtual keypad for the HD2
I reposted the thread in "Windows Mobile Software Development".. I this will get more attention for developers
lots of older games need a keypad, and the multi-touch will definitely will improve the control..
Playing SNES for instance would be really awesome on the huge screen
I just found this
http://forum.xda-developers.com/showthread.php?t=658673
it's definitely a great start, it works with kvetris, but does not work with Worms
Hi.
I am looking for someone knows something about programming for Android apps / Bluetooth familiar.
Who wants with me together make an app (or give me Tips how to do ...).
more precisely -> it's about creating an app that a Pokemon go + bracelet simulated.
Thus, an app that of the pokemongo app feigns with the bracelet via Bluetooth connected to be and just also its functions (u.u. also expanded ...) assumes / simulated.
layout: 1. floatingapp.
2. should the go + modeled after his.
3. vibration and optical alert at various events.
functions: 1. identical to go +
2. automatic trigger. quasi should the app detect whether a stop to turn or a
Pokemon to catch is.
3. settings to pokeball-selection - the app is based on the wp recognize which
the 3 pokeball varieties to catch used to be. (if feasible)
the great difficulty is probably to grab the Bluetooth signal - the app should just like go + via Bluetooth with pokemongo connect.
I have decompiled the Bluetooth-DriveeBluetooth-Driver from the Game and the most of the Bluetooth-Protocol...
I have some good ideal for grafics too.
if here someone will take place of interest in has with me together to realize would I about contact pleased.
greetings
First Part of Apk finished
Hi. The first Part of this app is finished - but now i need someone who can migrate the Bluetooth functions and the floatingbutton.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now write the last text files and then missing only the Bluetooth functions
I hope someone can help me with it... I never can do this without some help...
Greetz....