Ok let me set up the scenario for you all.... As you know I have previously cooked roms so this is very confusing for me...
First of all, I am using the newest ATT 214 ROM just recently released... I extract the .nbh file and start cooking.... I do my thing I always do and cook away...
I have completely stripped the OEMOperators Package and have my own...but it is following all the proper steps through the config.txt ect....
WHats happening is the ROM loads, go through the calibrating the screen, click skip a few times and the Green Windows screen loads. THe box for Customizing will begin in 3 seconds pops up and it starts.
After starting it changes my .tsk file and starts to run the NetCF3.5 cab file like instructed. It then quits. The screen that shows the progress disappears.. and it shows the homes screen. Problem is the phone is not usable at this point and I need to soft reset...
Once I soft reset it goes through the same thing over and over!
Any insight what is causing this would be most helpful????
Hey all, I was using SPB MS3 and went into the file explorer to find that the bottom bar of the lifestyle panel was stuck on the screen. This was annoying so I soft-resetted the device, but it didn't go away. I did a hard reset, and now it is really faint but it is still annoying, and I just flashed an entirely different ROM and it is even fainter, but still a problem.
Any way to fix this? I'll post screenies to make it easier to understand.
i think your refering to what is called "burn-in". When an image is left on an lcd screen for a long time, you can still see that image very faintly even after the image is removed from the screen. This is common for people who leave their lcd tv on one station for a long time and that stations logo gets "burnt-in" to the screen.
A solution to this is to make your entire screen white for about 10-15min. So get a .jpg or any picture thats just plain white, open it in album and view it in fullscreen for 10-15min and it should clear up your screen.
Thanks for the advice, but it has gone now after a bit of use.
adeltaY said:
Thanks for the advice, but it has gone now after a bit of use.
Click to expand...
Click to collapse
Incredible I didn't think you could do that too easily with an lcd.
Did you leave the screen on when you went to sleep or something? You must have had it on one image for a pretty long time
Okay, heres the problem im having, after the install of Manila 2.1 for my Fuze my phone's completely messed up. When I click anything on my screen it clicks something about 2 spaces down. For example on my WM 6.5 Unlock Screen, if I click a 3 it clicks the 9. I don't know what to do. I can't use my phone and its the same problem for everything: Games, Apps, Home Screen, etc.
Broman400 said:
Okay, heres the problem im having, after the install of Manila 2.1 for my Fuze my phone's completely messed up. When I click anything on my screen it clicks something about 2 spaces down. For example on my WM 6.5 Unlock Screen, if I click a 3 it clicks the 9. I don't know what to do. I can't use my phone and its the same problem for everything: Games, Apps, Home Screen, etc.
Click to expand...
Click to collapse
So uninstall it. Did you flash manila for a different device?
No, I didn't flash the Manilla, it was a cab file.
http://forum.xda-developers.com/showthread.php?t=542113
Have you tried re-aligning your screen?
Go to Settings/System/Screen and click align screen and follow the directions.
dwizzy130
I tried re-aligning but I do it, it moves to the next target thing, I finish and it re-starts the process.
EDIT: When I tap the target nothing happens, if I make a circle around it it goes to the next target but still restarts the process.
Broman400 said:
I tried re-aligning but I do it, it moves to the next target thing, I finish and it re-starts the process.
Click to expand...
Click to collapse
Hmm.... I say backup and hard reset. I know no one likes to hear that but I think it's the only (and best way) to fix a problem like this.
dwizzy130
How do I backup my games and program? i got like 100+ games and apps. And save files for the games, and how could I remove Manilla 2.1, I tried and it said it wasn't successful.
i recommend sprite backup if u have it, and if u got a micro card with some extra space backup on there as well or transfer to ur computer via activesync and as far as uninstalling manila, have u disabled it from today screen and tried uninstalling again? might be the case....
Now I can't even unlock my phone, i click everywhere on my screen but the WM 6.5 Unlock Slide Bar doesn't click or slide.
I had the exact same problem a couple of weeks ago, screen was not aligned and the calibrate screen program just went round and round. The problem seemed to start when the phone ran flat, it wouldn't charge properly either (it intermittently showed the charging icon and took forever to get any kind of charge). In the end I turned the phone off and charged it over night and the next day the screen was fixed and the battery fully charged. I have not had a problem since.
How do I turn the phone off, I tried last night but I cant get passed the unlock screen and holding the power button doesn't work?
Broman400 said:
How do I turn the phone off, I tried last night but I cant get passed the unlock screen and holding the power button doesn't work?
Click to expand...
Click to collapse
If I were you, I would hard reset then flash back to stock ROM, then see if your issue is resolved (which I am 99% certain it will be).
If you can get it to sync, your all set, if not you'll have to flash via SD card.
Also, obviously removing the battery will turn it off.
Id hard-reset but I got too much apps and games, and what'll happen to my saved game files?
Broman400 said:
Id hard-reset but I got too much apps and games, and what'll happen to my saved game files?
Click to expand...
Click to collapse
They'll be all gone. That's why backing up regularly is a really good practice.
dwizzy130
Broman400 said:
Id hard-reset but I got too much apps and games, and what'll happen to my saved game files?
Click to expand...
Click to collapse
Either that or you figure out how to uninstall the manila that hosed you up.
Do you install your aps to your SD card or device, if SD card, you're fine, if device, you will lose your data.
You could either have a brick full of games or a phone that is able to have games work again.
Use SKTools for uninstall. If that doesn't work, hard reset.
I got the games and apps and everything on my SD Card, but if I hard-reset itll remove them from my Games and Apps folders and they won't be in my Add/Remove Programs List. Any program back that up? I got SPB Backup but never used it.
SKTools is the only effective way I've found to uninstall Manila.
But, I can't even unlock my phone anymore, I click the Unlock Thing and it doesn't click and my computer doesn't find my phone.
Sync your phone and explore it with your computer... Grab whatever saved data you need... Then hard reset or flash another rom...
Hello, I have a XDA Orbit 2 (screen res 240x320). I wanted to install Android on it. I did a quick search and found a few things....
My Tutorial:
http://forum.xda-developers.com/showthread.php?t=625200
I had a read though that. Got a rough idea on what I was doing.
(1º CHOOSE YOUR ANDROID BUILD) I decided to use:
Warm Donut (Donut): http://forum.xda-developers.com/showthread.php?t=619980
(2º INSTALL THE OS LOADER TO NAND) Now this was my problem, I visited the website "http://it029000.massey.ac.nz/vogue/files/?C=M;O=D" to choose my .NBH file. I choose the latest ones. And the selection was:
polaimg-panel1-320-08-04-10.nbh
polaimg-panel2-320-08-04-10.nbh
polaimg-panel3-320-08-04-10.nbh
I tested ALL 3 and non worked (unless I was doing something wrong) all i got was when it restarted it went to a fizzy kind of screen then came straight to a white one.
But I did try another .NBH file what was near the bottom called "polaimg-240x320-03-02-10.nbh " that didn't work but it was close.... when it restarted it vibrated once then went to a black screen then vibrated twice then came to another screen with a animal in the top left and under niethe they was loads of white numbers letters scrolling down the screen then it just got stuck on that and nothing happened from there.
EDIT:
I have got a bit closer now. I decided to try run it through haret, Well... I click Run. see black screen with letters scrolling, I get to the bit where it says "Hold down Volume Up or DPad center to launch installer. And before I have chance to do that this appears under:
Code:
sh:2: unknown operand
losetup: /dev/block/loop 1: No such file or directory
Failed
Failed to reach system.img on SD card.
Can anyone help me? or point me in the right direction to get android installed on my xda orbit 2?
Thanks, James
Just try a earlier nbh i use polaimg-panel3-320-29-03-10.nbh most of the later ones have either problems with sound or wifi.
If you get a white screen it's prob wrong panel depends on you phone pola100 or 200.
Thanks, But I have tried that.
I have a new problem now. Might be easier to solve.
can't anyone help? kinda in a rush for it.
Hi,
i had the same problem with another build.
You should try to get into the installation menu and install Android.
This helped for me.
I found the solution here on xda-developer.
Since I am too new or too stupid to post a link the post seems to be this one:
showpost.php?p=5602064
Have fun,
René
I have a T-Mobile HTC HD2. I do NOT want to update it or do anything that requires a factory reset. Whenever my Sense application freezes (quite often, and usually when I open a new text), I am unable to access the Settings menu to turn off or restart Sense in the Today Screen settings, because I cannot GET to the Today settings. It simply does nothing when I tap "Settings" in the start menu. If I have to restart the phone, it takes approximately 2 minutes and 30 seconds to turn back on, which is unacceptable. I want to know how to restart a frozen Sense without restarting the Device (in a minute or less). I have tried ReSense and it does not work. I have also tried looking for the Today settings application in the File Explorer, with no success there either.
Try to use CleanRAM, and select level 3. Hope this helps, Google will be your friend.
Thanks! That worked to restart Sense and speed up my phone as well.
Hi guys,
I will let my experience here...
I had a very specific kind of freeze tha happened about 3 months since the last hard reset.
This freeze occurs this way:
- Someday (i don't know how and neither why...) when my phone restarts after about 2 to 5 minutes it freeze if still on any sense screen... and nothing works, except for push windows button that make it goes to start screen... On windows screen if I wait more than a minute to do something it freezes again and I need to push windows button again, then I can go to my folders and run any program...
- sometimes it just freezes if I push lock\end button and when I try to slide the unlocker it freezes and the only thing that works again is the start button.
- If I restart my HD2 without the memory card inside I never get any freezing at all...
- The solution: I deleted (on storage card) the "HTC" folder (in the "application data" folder and every file called "device" or "album" or "thumbnail" on storage card. On restart the phone create new files and foders like that, but the freezes disapears !!!