Hi,
I have a little problem with my Raphael and my in-car handsfree.
They auto-pair, i.e. when I enter the car and try to call someone on my Raphael, I already see the headphones symbol.
The strange thing is: I can call (actively) at any time and it works.
But when I just enter the car and start to drive and someone calls me, the hands-free doesn't signal the call. Only when I set it to "auto answer incoming calls" incoming calls were answered (but then I couldn't choose whether I want to answer or not).
The strange thing: When I start the car, call someone (actively) and get a call after that, the call *is* signaled in the handsfree, so it seems that the mobile and the handsfree have a "deeper connection" after a single call.
I wrote an email to the manufacturer and they told me it was mobile/model/firmware specific.
Is there anyone who can enlighten me, how this is possible and if there is something I can try on the Raphael?
Related
I have bluetooth headset NOKIA BH-101. it works with my htc tornado like handsfree. but i can not get it play all sounds. it only works with calls but when ii play sounds or video files it sounds out of my phone.
This gadget supports Hands-Free and Headset but does not work with voice dial function. Can anybody help?
makler1981 said:
I have bluetooth headset NOKIA BH-101. it works with my htc tornado like handsfree. but i can not get it play all sounds. it only works with calls but when ii play sounds or video files it sounds out of my phone.
This gadget supports Hands-Free and Headset but does not work with voice dial function. Can anybody help?
Click to expand...
Click to collapse
try to chek the settings
bestever said:
try to chek the settings
Click to expand...
Click to collapse
what exact setting do you mean?
try this cab i found on http://mobile.surrealnetworks.com/
Check this thread too:
http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp
This will install newest bt stack.
I should also ask which ROM you're using. The newer ROMs seem to be a lot better.
I'd also like anyone who could to tell me which BT stack is included on the newer ROMs, like Nitro or vjgrace.
Exitao said:
Check this thread too:
http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp
This will install newest bt stack.
I should also ask which ROM you're using. The newer ROMs seem to be a lot better.
I'd also like anyone who could to tell me which BT stack is included on the newer ROMs, like Nitro or vjgrace.
Click to expand...
Click to collapse
my ROM is WM6 by vjgrace v3.4
Again I could describe my Nokia BH-101 BT headset with handsfree functionality on WM6 by vjgrace v3.5. It works nice as headset i can hera incoming calls, answer them, call last dialed number. But I CAN NOT make it start voice calling, due to device itself - it does sounds special tone that means that voice dial is started, but my phone does not recognise it. by the way useing celetask - there is special feature - that alows you to redirect all sound to headset and it work. As for me i don't need it (you are to have special BT Headset for listening to music. This headset generates rather bad sound(but not voice).
So again
I can do:
makle calls,
answer calls,
dial last dialed call.
swap and hold calls.
I can not do:
make voice dial
any voice commands
What are the problems:
Everytime I answer the call not by the headset but via the phone it looses the connection with headset, so i need to restart BT service (or headset).
It happens even if I answer by headset but during the call i need to speak via phone then i press right softkey and choose "turn handsfree off" and aain phone looses the headset
In this case I I make new call but in right soft key menu "turn handsfree on" is not active
If it's possible to make phone speak contact's name litterally during incoming call so i could know who is calling me.
IRC, voice dialling with WM phones is a bit of a problem. I seem to recall reading about this somewhere in the XDA-Dev forums.
On my headset, the function that calls for redial is the same for voice dial (wtf? I know.) It always redials.
As for the speaking of the contacts' names, it should be possible... if your phone can speak the contacts' recorded voice names w/o BT.
I use Tomtom frequently and use a bluetooth headset to handle my phonecalls. However when I use Tomtom, I want to hear the navigation instructions from the phone speaker and not from the headset. When I recieve or make a phonecall: vice versa.
I have come up whit a workaround solution. I use BTtoggle to turn bluetooth on while navigating if I receive a phonecall, takes some time and then anwser the phonecall through the bt headset. And then with alttab back to tomtom, so that I can see the route and calling at the same time. It's not perfect, but it does the job.
I want to have this done automatically by the phone. If I am navigating and a phonecall comes in, then the phone automatically turns on the BT, I answer the phone and tomtom remains on the screen. If i am done with the conversation, bluetooth turns off and i hear the voice from tomtom again through the phone speaker....
Does anybody know how this can be done? I have seen a Palm application which could do the trick...(by the way, it has got the same name as the bt toggle app: BTtoggle)...
I'm sure you've heard of this issue before but I was unable to find a fix!
I have been using VC1.6 through strictly the device mic / speaker and it has worked great except for some reason it does not announce incoming calls.
Currently using ATT TILT with WM6
Using 520 Plantronics BT Headset
I downloaded "Bluetooth Voice Command Configuration" from XCSdM but it doesn't seem to do anything to help!
When I press the talk/end button on the Headset it enables the bluetooth static but it does not give the VC prompt.
I'd also like it to be able to announce incoming calls through the bluetooth!
Anyone?!
Well, I got the incoming calls to announce!!! Now all I need to do is find out how to get the VC1.6 and my bluetooth synced so that when I press my bluetooth headset button it activates the VC...
Please? LOL
Does your bluetooth headset support the handsfree profile? Not all headsets support the handsfree profile (even if you can use it to pick up and answer calls). I've got VC 1.6 and voice command working just fine with my Tilt and Jabra 8010.
edit: seems your plantronics does support the HFP. Did you ensure you "checked" the box for Hands Free Service when you paired it?
Yes, it's completely paired and the handsfree is checked :-\
I'm stumped. I get incoming call notifications, I get announcement reminders, etc.... but when I push the button on the headset it tries to initiate (or answer) a call.... If I hold it down, it powers off the headset. If I double click it, it calls the last person I talked to.
Maybe I just don't know how to function my headset to get it to prompt for VC?
I followed the "RandyRants" Tip to get everything working and it did activate the announcement of incoming calls, etc... just can't make commands yet.
I'm also using the BT VC Config enabled @ 30 duration.
I'm 1/2 way there!! Now I just need to cross the finish line...
Here's the link yo RandyRants that I followed: http://www.randyrants.com/2007/05/wm6_tip_voice_c.html
Any advice?
didn't really see a thread....mod's if this needs to be moved, please do so.
I've noticed a quark in the way the Bt audio gateway works on my fuze.
Does NOT matter which headset I use, but, 99% of the time, if someone
calls me, I hear the phone ring, activate the BT, they can hear me, but I
cannot hear them. If I shut the headset off, turn it back on and let it
connect, I can hear them & they can hear me. This ONLY happens on incoming
phone calls. On outgoing, everything works.
When connected, if you look at the BT icon, it shows the BT icon, with what
looks like a STEREO headset. If you click on it, it says connected to a STEREO
headset, which my JB2 or any other BT is not.
Is it possible that the fuse is using the mic, but the sound is being directed to
a non existent "stereo" headset, which would be the other ear?
Happy Thanksgiving! Everyone have a nice Triptophan (sp) nap?
Do you have MSVC set to announce incoming calls? If you do and you answer via the headset, you can't hear the caller. Disable announce incoming and it'll work just fine.
It's a known bug and we need to complain about it (and the rest, like the left/right dpad) to AT&T and HTC.
MSVC set to handle BT, announce incoming.
When I hit the button on the headset, the incoming ring/announcement stops,
the phone says it is connected, and the caller can hear me, but I cannot hear them.
I was wondering if anyone using a NON stereo BT headset, when you are connected, it says if you click on the BT icon, "stereo headset".
Just in case you missed it - you can't have MSVC announce incoming calls OR IT WILL MUTE THE CALLER.
Turn the announce off and it'll be fine until MS/HTC/ATT fix their stinking problem...
oh and don't forget to complain...
Oh, I have complained....never had that problem with the tilt.
I guess I'll go back to just having unique ringtones for everyone, so I can tell
who's calling...until MS fixing the #%@#^ problem. Thanks for the
clarification. This was driving me nuts! They could hear me, but I couldn't
hear anyone.
pkley said:
Just in case you missed it - you can't have MSVC announce incoming calls OR IT WILL MUTE THE CALLER.
Turn the announce off and it'll be fine until MS/HTC/ATT fix their stinking problem...
oh and don't forget to complain...
Click to expand...
Click to collapse
My apologies if this has been asked and answered....I can't image it hasn't but I did search and didn't see anything exactly like this.
I have a bluetooth headset connected to my watch. when I get a call, the watch shows an incoming call, my bluetooth headset announces the call, when I answer the call, on the watch, the call goes to the watch speaker, not the headset. After I answer the call I have to tap on the watch to move the call to the headset.
Anyone know why? and how to make it go directly to the headset on answer?
Thanks,
Matt
Have you tried answering with the headset instead? Maybe check the Bluetooth settings as well to make sure the headset is set as the default (if possible)
sudermatt said:
My apologies if this has been asked and answered....I can't image it hasn't but I did search and didn't see anything exactly like this.
I have a bluetooth headset connected to my watch. when I get a call, the watch shows an incoming call, my bluetooth headset announces the call, when I answer the call, on the watch, the call goes to the watch speaker, not the headset. After I answer the call I have to tap on the watch to move the call to the headset.
Anyone know why? and how to make it go directly to the headset on answer?
Thanks,
Matt
Click to expand...
Click to collapse
Do you have phone audio option in Bluetooth settings on the watch? Or only media audio?