Database Info

some one plz help

i have strange problem as soon as i connect my HTC p3300 with pc my pc internet stop working and my htc is not connecting plz adivice

you should probably post this in the Artemis (P3300) section.
mods?

i love to post there but my problem is not in any category
there are 4 sub zone Artemis
Artemis upgrading etc
Artemis accessories
Artemis mobile 6
in which i should post this problem let me know

actually, on second thought, you should post this in the "general" forum.
This doesn't actually have anything to do with the Artemis, but seems to be a general problem

so u have any solution or just want mod to delete this thread?

thank you just want to ask something is there anyway TO connect PPC to internet via PC with Bluetooth

Ultimate 9502 upgrade ??

is there any hope that we can upgrade the ultimate 9502 to wm6.1 soon ????????

There is another thread on this a little further down, but so far i-Mate support is telling some people yes, and some people no - so I'm not sure.

so y cant some1 cook wm6.1 for imate 9502?

6.1 soon?
Signs of activity, or just wishful thinking?
http://preview.tinyurl.com/57sshv

Well we are trying to develop rom for imate 9502 but we are not getting enough support from the community. Check out the link in my signature and help the community in whatever way possible, so that we can build a working rom for the device.

This turned up in the Imate forums today. If anyone can translate from Polish it'd be great.
UniCom (Polish i-mate distributor) informed that i-mate confirmed OS update to WM 6.1 for 9502 and 8502.
The exact date will be announced soon.
Source:
http://www.gsmonline.pl/portal/news...M,Professional,6.1,w,smartfonach,marki,i-mate
Edit: Same link as above. Sorry.

samy.3660 said:
Well we are trying to develop rom for imate 9502 but we are not getting enough support from the community. Check out the link in my signature and help the community in whatever way possible, so that we can build a working rom for the device.
Click to expand...
Click to collapse
Hmmm. Perhaps that's because you've set up shop outside of the community? 9502 users are thin on the ground as it is, so why fragment that user base further by trying to divert them off to a lightly used forum? There's a wide audience of ROM experts here at xda-dev, so wouldn't it be more productive to share your ideas here? I have enough forums to check everyday as it is, so I don't really need another one with limited content and only a handful of users.
OK, the 9502 hasn't got its own section on xda-dev (and isn't likely to). But neither has the i780, and that hasn't stopped very successful collaboration and development for that device right here at the home of ROM cooking.

Ineedtoys said:
Signs of activity, or just wishful thinking?
http://preview.tinyurl.com/57sshv
Click to expand...
Click to collapse
Are we there yet?
Answer -NO STILL
So I personally doubt Imate will do it, I think its more likely they won't be around for long given the reports I read.
eg.
HTML:
http://msmobiles.com/news.php/7733.html
I think this is interesting!
"Sales for the six-month ended of September are estimated at $20.6 Million compared to $46.2 Million for the same time last year. This resulted in an estimated operating loss of $10.8 Million loss compared to $29.4 Million loss for the same time last year. Our cash position is at $11.2 Million and stock at $9.1 Million with debtors of $3.9 Million and creditors of $2.6 Million."
If I am reading this right it sounds like a good thing sales are about half because now the losses are only about 1/3. To me it's obvious why they are delisting and the customer support is legendary for all the wrong reasons.
Looks like we need to make our own ROM if my 9502 will work like its supposed to.

calibration code !
Originally Posted by corollatercel View Post
So i've been having problems with the screen alignment on mine since i had one spot on my MDA screen that was dead and my screen was cracked so the alignment wizard basically got stuck in limbo when I tried to calibrate it. SO basically what I had to do was download PHM Registry Editor and change the registry key touch referenced in here.
Afterwards I used the remote alignment tool (attached) to retrieve the correct settings from the correctly aligned mda(after changing the registry key then rebooting the device) then made sure the file was saved on my pc....normally it's saved by default in the C:\Program Files\Code Factory\Remote Screen Alignment directory. The file was called WIZA200.dat. I did a soft reset then when the alignment screen came up I did the skip function in the remote screen alignment application and it automatically read the proper calibration from the wiza200.dat file and then properly calibrated my mda now my screen is properly calibrated even though i never ran the alignment wizard.
So here are the Instructions folks:
1. Download the latest activesync and connect your mda to your computer and verify your device is connected(not as guest)
2. Perform a soft/hard reset on your MDA then tap your screen to start the screen alignment wizard
3. Download the remote screen alignment tool attached and install it on your machine.
4. Download the wiza200.txt file attached and rename it to WIZA200.dat then put it in the C:\Program Files\Code Factory\Remote Screen Alignment directory on your computer
5. Ensure your MDA is connected to your pc(A green activesync Icon usually indicates a connection )
6. Open the remote screen alignment tool on your pc meanwhile your phone be displaying the alignment screen wizard.
7. Click SKIP in the screen alignment tool.
Assuming everything went fine a message box displaying "The operation has been completed successfully. Your device will be restarted." should pop up on your computer and your device should restart. Afterwards your phone will run the files it always does when you do a soft/hard reset then you touch screen should be properly calibrated and work fine.
​thanks in adv !

Diamond to PC Software (SMS and Call)

Hey People,
I am looking for a Software to install on my PC so that I can write SMSes an can do phonecalls on my PC over the Diamond.
So is there perhaps a Software for PCs wich works over ActivSync with nearly almost every Pocket PC / Smartphone?
THX for reply
P.S.: Sorry for my bad, really bad English, I hope you understand it

I found what i wanted,
jeyo mobile extender is it called, really nice! works for every pocket pc / smartphone.
Now I still look for calling possibility

I looked for jey o mobile extender and found this :
Jeyo Mobile Companion 2.1
on http://www.jeyo.com/
It says it does calling too

Jeyo is a great app but it can only dial the numbers from the application, not let a call go through the pc.

MODS this thread should really be under the general Diamond section, as this is not an accessory it is a software

timn2087 said:
MODS this thread should really be under the general Diamond section, as this is not an accessory it is a software
Click to expand...
Click to collapse
Sure about that !
+1
(but where are Mods ???)
______
@blackfear : you could also try this one : Mobile Data Viewer

....or check out a programm called "My Mobiler"
Works great !

Help needed with HTC Touch Plus

Hi Guys
I recently sent my HTC touch plus (MDA Touch Plus) for some structural repair to t-mobile and before returning they updated my software from WM6.0 to 6.1. Since then I am having some problem with my phone book. Whenever I am recieving a text message or phone call, it comes with sender's phone number with addition of country code (0044) as a result my phone can't recognise the caller even if its stored in my phone. I tried to download Window Mobile 6.0 but its not happening. Any expert comments about it......thanks

any ideas how can i change it to WM6

Search in Touch Dual ROOM.
D'rath

anshu_80 said:
any ideas how can i change it to WM6
Click to expand...
Click to collapse
Welcome to the forum
Have a look here, locate your device and enter to the proper section, there you´ll find the process to reflash to another ROM
http://wiki.xda-developers.com/
Good luck,

[Q] WinCE 6 SIP problem

Hi guys,
I am at my wit's end...
I have a Navigon 40 GPS device with WinCE 6.0.
Unfortunately, there is no SIP keyboard in Windows itself (but i desperately need one)
As the SIP is known to be in coredll.dll, I tried to hexedit different keyboards as JotKBD etc. to use coredl2.dll and put latter in \Windows directory.
It is not working at all, keyboards are not starting up.
I registered different SIP dlls with gbregsvr.exe, such as the SkySip.dll for SkyDeamon keyboard, nothing is working (I can register dll, but keyboard is not starting up).
Not even ExecutabilityCheck, nor RomExtractor is working. It is even getting to a point where there is no window for e.g. opening / saving files in notepad - if i press File -> Open, nothing happens.
The only thing partly working is 'Freefloat Key One' keyboard (shareware), where only symbols and numbers are working, no letters at all.
Even tried to edit SIP in registry (e.g. HKEY_CURRENT_USER\ControlPanel\SIP )
Can somebody help? I know this WinCE is cut alot, but IMO it is not only due to coredll.dll.
What else can I try?
Thanks for your help, maybe my problem can be seen more as a challenge
Regards,
Martin
BTW: 5" Navigon 70 has exactly the same issues

*push*
nobody can help me?
How do i get keyboard in windows?...maybe I did sth wrong?

hopeless
After several attempts to get the SIP to work, I give up.
I think Navigon built the WinCe Rom w/o SIP support...
So my chances are near to impossible, right?
Damn Navigon.... I'll send them a nice and friendly mail
I believe only the "Bastard operator from Hell" can be this mean and take out the SIP support...

stupid gneral discussion forum
I need 10 posts not only to post in General Q&A, but in the forum I need to.

so here the last pointless 6 posts of me to be able to post somewhere useful....
this is just sad...

once again...

at least I am spamming my own thread...not that someone is replying anyway (at least in General Q&A when you have specific topics)

2 to go

1 to go
yes, i am freee
free of stupid vBulletin message
sorry for spamming, but it is kinda your own fault.... too bad

Each WinCE comes with a SIP: Look in folder \Windows for msim.dll (default small software keyborad) or largekb.dll (choiceable large software keyboard),

But to configure that in WinCE? There are no Apps for that
Sent from my A8 using xda app-developers app

That is definitely one way to get by the 10 post mark.
Sent from my SGH-I777 using xda app-developers app

bmkhizar said:
But to configure that in WinCE? There are no Apps for that
Sent from my A8 using xda app-developers app
Click to expand...
Click to collapse
Wrong.
Since CE 5.0 the SipSelect tool is part of the shell, its icon is in CE taskbar.
If you want it to be run from within an application (ex. MortScript) you can use the attached executable(s).

bmkhizar said:
But to configure that in WinCE? There are no Apps for that
Click to expand...
Click to collapse
Use SipChange