I've been using dferreiras WM5SE but would like to try WM6.1 like J.VD.Spanks and others.
1) What is the recommendation procedure on upgrading a upgrade?
2) Since I'm already unlocked, can I just flash on top or should I start from scratch with the love button and T-mobile rom then flash?.
3) Is there a way to back-up my existing set-up just in case I want to go back?
Sorry for the noob questions and thanks up front.
1. Some say it's better to re-flash an official rom before another custom.
2. You can just flash on top, no need to repeat the procedure.
3. SPB backup
3) Is there a way to back-up my existing set-up just in case I want to go back?
Click to expand...
Click to collapse
what kind of data, do you mean PIM (contacts, SMS, Appointments, etc..) then use Dotfred's PIM Backup
Thanks for the replies.
I was going to sync with my laptop but I've made many changes with my contact information on the phone and I wasn't sure if it would revert to my older contact list.
I've also decided to start from scratch just so its a clean install.
Related
just read the new flashing FAQ (and rather good it is too )
so having been prompted to back up my text messages i downloaded the pimbackup software (dotfred) to find that it wont work with vista
can anyone suggest another app to do a backup of my device.
many thanks
PIMBackup is for use on PPC, not on your desktop-computer....
arse, talking about looking like an idiot
i assumed that you ran the exe and then it installed on your phone.
RTFM for me
Hello!
I will receive my Polaris in a couple of days And I will probably load some new programs into it.
My question is: after a hard reset it will be back to factory settings right?
How do you load the new programs again?
Do you load them one by one, or is there a kind of backupprogram that will load all the programs for you?
Thank you.
And this is a excellent forum
jacob12 said:
Hello!
I will receive my Polaris in a couple of days And I will probably load some new programs into it.
My question is: after a hard reset it will be back to factory settings right?
How do you load the new programs again?
Do you load them one by one, or is there a kind of backupprogram that will load all the programs for you?
Thank you.
And this is a excellent forum
Click to expand...
Click to collapse
Of course you can use a backup program. The best are SPB Backup & Sprite Backup.
There are some backup programs, but they only store the contact/mail/calendar data... I'm not sure if there is any that backups the programs... the best way is to install everything on the memory card, and backup the shortcut files on the memory card. After the HR you only have to copy those back in the StartMenu folder
Som program dont work whithout registry entries or other installed components, so these won't work whith the method above.
The Activesync, and the Device Center has a list of installed/installable apps that will install those on user request (mass install), but that will still intall them 1 by 1....
jacob12 said:
Hello!
I will receive my Polaris in a couple of days And I will probably load some new programs into it.
My question is: after a hard reset it will be back to factory settings right?
How do you load the new programs again?
Do you load them one by one, or is there a kind of backupprogram that will load all the programs for you?
Thank you.
And this is a excellent forum
Click to expand...
Click to collapse
If you're getting a sim free polaris, then, it comes with a free HTC back up software and a complimentary Sprite Back up software. You can use either of them. Install either one of them on the main memory but make sure you put your back up on your storage card.
Side note: Load APPLICATION software one at a time and observed the behaviour of your device for a day or so. If it's working according to your expectations then make a back up and install another one.
Thanks guys
And my Polaris comes sim free so hopefully the software I need is included in the package.
jacob12 said:
Thanks guys
And my Polaris comes sim free so hopefully the software I need is included in the package.
Click to expand...
Click to collapse
There have been complaints about the (old) version of Sprite Backup that is included in the CD of Polaris. I would suggest to install the latest version of Sprite Backup or SPB Backup.
The HTC backup tool is Sprite Backup 5.10 (P3650_BackupTool_5.1.0.b1450_HTC_WWE_20071102.exe)
And the included 'SpriteBackupEnglishPersonalSetup.exe' is the same as the HTC one, but it installs a PC suite aswell.
Hi, I was using the guide here: http://karhoe.net/content/view/21/1/#josc641 to upgrade my phone from WM5 to WM6.1 using Standard ROM from XDA-Developers, made by illi & rickywatt.
before flashing, i transferred a copy of the pim.vol file to my computer. after flashing, I try to transfer it back into the new WM6.1 OS to restore my contact. But after that, when i try to access my contacts, just the title page pops up momentarily for like 1 second and then it's gone.
anyone know how to fix?
thank you
kyniemxotxa98 said:
Hi, I was using the guide here: http://karhoe.net/content/view/21/1/#josc641 to upgrade my phone from WM5 to WM6.1 using Standard ROM from XDA-Developers, made by illi & rickywatt.
before flashing, i transferred a copy of the pim.vol file to my computer. after flashing, I try to transfer it back into the new WM6.1 OS to restore my contact. But after that, when i try to access my contacts, just the title page pops up momentarily for like 1 second and then it's gone.
anyone know how to fix?
thank you
Click to expand...
Click to collapse
why u not use PimBackup before flashing?
i didn't know such a software existed. excuse my ignorance.. what can i do now?
--> http://forum.xda-developers.com/showthread.php?t=269237
Looks like the structur of the pim.vol file changed from WM5 to WM6. I'm afraid you're copy is useless unless you find a way to extract your contacts.
A solution might be to reflash WM5, use your pim.vol-copy to restore the ontatcs & then use another way of backing up your contacts before flashing WM6.
Is there a way to turn a backup file into an OEM package that is automatically set up as part of the ROM?
For example, say I cook my own ROM that has nothing at all. I then install all my apps, enter all my serials and registration info into all the apps, get my WiFi set up with all my WEP keys, all my favorites, all that kind of stuff. Then I make a backup using some backup program.
Can I then take that backup file and cook it into the naked ROM so that all of my serials, settings, etc are all set up after every hard reset?
I know I could just put it on the storage card and restore after every hard reset, but I would rather have it cooked right into the ROM if this is possible.
If this is possible, what would be a good backup program to make the backup file with?
i was thinking that when the device is doing the customization or whatever you call it after the hard reset, it could be restoring from the backup file.
Has anyone done anything like this yet?
Even I am wishing that there is such a way.... You put in words what many of us noobs wish for.
I'm sure there is a way to do it. Hopefully someone will help us out.
I am by no means an expert, but I would guess you need to somehow cook the backup file into the ROM, and then edit the autoexec.bat file to run that backup file.
So what we really need to know is, which backup program makes the best backups, that restore without any user input. Something that all you do is tap it and it does the rest from there. And it would need to restore all installed apps, all settings, all internet favorites, all registration info for all the apps, all calendar, contacts, and tasks, and any registry tweaks.
If we can locate the backup program that does this with minimal user input we have passed step one. Step 2 would be to cook the self executing backup file into the ROM, and step 3 would be making the ROM run the self executing backup after hard reboot, during the automated customizations. And if you soft reset the device before it runs customizations, I would want it to start running the customizations immediately after the reboot (like the newer stock ROMs do).
That way if my phone gets stolen I can use Sprite Terminator to locate it, and whoever steals it will have to flash a new ROM to get rid of Sprite Terminator.
I would not want this backup file listed anywhere on the device either. For example, if you look in "Programs" (or anywhere else) you don't see it. That may or may not be the hardest part- I don't have any idea if it's even possible. But it's not an issue until we get the other steps done.
life would be much easier...I hope someone can make this real
Any UC compliant ROM can do that for you. They are meant to autorun any file which you users want to run after ROM upgrade. Good luck, check sleuths thread for more info.
Here is my situation:
I had a HTC Touch Pro T7272. A few days ago I lost this phone but ordered a new one.
I ordered the same phone, but it may have a different ROM/Radio version
For the phone I lost, I have a full backup, from 3 weeks ago. I also have the updated synced files from the day before I lost this phone. I had done a lot of tweaks and added many programs, so it would be best to restore the full backup to the new phone.
1. When the new TP arrives, should I load the Sprite backup (an .exe file) onto the new phone and run that?
2. Then sync to my desktop to get the latest file updates?
3. Do I have to load sprite backup onto the Touch Pro first? Or can I just load the backup file and double clip it to execute Restore?
4. I have .net 3.5 loaded on my desktop. Do I need to load this onto the TP BEFORE I do the Restore?
Any advice here would be greatly appreciated.
Joe_PDA said:
Here is my situation:
I had a HTC Touch Pro T7272. A few days ago I lost this phone but ordered a new one.
I ordered the same phone, but it may have a different ROM/Radio version
For the phone I lost, I have a full backup, from 3 weeks ago. I also have the updated synced files from the day before I lost this phone. I had done a lot of tweaks and added many programs, so it would be best to restore the full backup to the new phone.
1. When the new TP arrives, should I load the Sprite backup (an .exe file) onto the new phone and run that?
2. Then sync to my desktop to get the latest file updates?
3. Do I have to load sprite backup onto the Touch Pro first? Or can I just load the backup file and double clip it to execute Restore?
4. I have .net 3.5 loaded on my desktop. Do I need to load this onto the TP BEFORE I do the Restore?
Any advice here would be greatly appreciated.
Click to expand...
Click to collapse
1- You can - although it's not necessary if the backup file you created is self-restoring.
2- Yes after you've run your backup.
3- No, see my #1
4- No, unless the last backup you have doesn't include it.
Thanks for your advise C. My head is still spinning from losing my phone.
If the restore somehow messes with the phone (let's say it's got a new ROM and slightly different registry), you can always then backup your PIM data with PIM backup 2.8, then do a hard reset and restore the PIM data. If you want to get fancier, you can look through your registry and find the settings that you'd like to keep, and export those reg keys to your sd card, then import them back after a hard reset.
Since the backup file is an .exe file, can I run it from the micro sd card in the phone, or does it have to be run from the desktop?
I am sorry to tell you but, after updating to the new ROM, I tried to restore a backup taken with the old ROM and I had major problems, one of them being that the screen would not rotate when sliding out the keyboard, so I ended up hard-resetting and reinstalling all applications one by one....
Wouldn't you be better off restoring using the same ROM (as used in the backup), THEN upgrading ROMs?
This reminds me though, I don't know which ROM I had in my lost phone. Therefore I might have to reload eveerything one by one...ERRRR
Hi,
I recently did that after upgrading the ROM. I can say it works, but I'm not sure, if there are any files from the new ROM that have been replaced by old versions. You'd probably be better off just restoring your PIM data only...
CU,
Cactus World
Now I am all messed up. Please help.
1. I just received my replacement TP phone. I loaded the backup .exe file onto it but it would not execute. Error message says missing a component.
How to I get sprite backup working again? It is on my desktop.
2. I need to load .net 3.5 onto this device. I can't remember where I got it from or how I loaded it. Can someone remind me. It is actuially already loaded on my desktop.
3. I need to reload the latest version of Google Maps. Does anyone have the link?
Thanks for the help. My head is about to explode trying to get this new phone back to the previous state.
Okay, I figured out 1 & 2.
Does anyone have a link to the newest Google maps?
Does anyone know the registry setting to remove an icon on the email tabs? After doing the restore, I have 2 icons that were linked to email accounts, that no longer work. How can I get rid of them?
My last phone had "Programs" in the bottom right hand corner of Today screen. This one has "Contacts" I prefer "Programs" Does anyone know how to fix this?
I apologize if I suck at describing some of these issues. I am still beating myself up for losing the phone.
http://www.google.com/gmm/GoogleMaps.CAB
And try this for fixing those orphaned accounts - worked for me:
http://nicolasmauri.blogspot.com/2007/01/wm5-utility-recover-your-lost-mail.html
hyachts, thanks for the help. this software from Nicolas Mauri might work, but I couldn't tell from his blog. You see I have 1 or 2 extra email icons that were left from a restore. Will this program get rid of those email icons? Also, it is in .rar format so I can't use on my comouters here. I have to try my office. Is there a .cab file in the .rar file?
One more request. Does anyone know how to add the "programs" choice instead of "contacts" on the home screen (lower right hand corner)