Hello!
I will receive my Polaris in a couple of days And I will probably load some new programs into it.
My question is: after a hard reset it will be back to factory settings right?
How do you load the new programs again?
Do you load them one by one, or is there a kind of backupprogram that will load all the programs for you?
Thank you.
And this is a excellent forum
jacob12 said:
Hello!
I will receive my Polaris in a couple of days And I will probably load some new programs into it.
My question is: after a hard reset it will be back to factory settings right?
How do you load the new programs again?
Do you load them one by one, or is there a kind of backupprogram that will load all the programs for you?
Thank you.
And this is a excellent forum
Click to expand...
Click to collapse
Of course you can use a backup program. The best are SPB Backup & Sprite Backup.
There are some backup programs, but they only store the contact/mail/calendar data... I'm not sure if there is any that backups the programs... the best way is to install everything on the memory card, and backup the shortcut files on the memory card. After the HR you only have to copy those back in the StartMenu folder
Som program dont work whithout registry entries or other installed components, so these won't work whith the method above.
The Activesync, and the Device Center has a list of installed/installable apps that will install those on user request (mass install), but that will still intall them 1 by 1....
jacob12 said:
Hello!
I will receive my Polaris in a couple of days And I will probably load some new programs into it.
My question is: after a hard reset it will be back to factory settings right?
How do you load the new programs again?
Do you load them one by one, or is there a kind of backupprogram that will load all the programs for you?
Thank you.
And this is a excellent forum
Click to expand...
Click to collapse
If you're getting a sim free polaris, then, it comes with a free HTC back up software and a complimentary Sprite Back up software. You can use either of them. Install either one of them on the main memory but make sure you put your back up on your storage card.
Side note: Load APPLICATION software one at a time and observed the behaviour of your device for a day or so. If it's working according to your expectations then make a back up and install another one.
Thanks guys
And my Polaris comes sim free so hopefully the software I need is included in the package.
jacob12 said:
Thanks guys
And my Polaris comes sim free so hopefully the software I need is included in the package.
Click to expand...
Click to collapse
There have been complaints about the (old) version of Sprite Backup that is included in the CD of Polaris. I would suggest to install the latest version of Sprite Backup or SPB Backup.
The HTC backup tool is Sprite Backup 5.10 (P3650_BackupTool_5.1.0.b1450_HTC_WWE_20071102.exe)
And the included 'SpriteBackupEnglishPersonalSetup.exe' is the same as the HTC one, but it installs a PC suite aswell.
Related
Hi, I was using the guide here: http://karhoe.net/content/view/21/1/#josc641 to upgrade my phone from WM5 to WM6.1 using Standard ROM from XDA-Developers, made by illi & rickywatt.
before flashing, i transferred a copy of the pim.vol file to my computer. after flashing, I try to transfer it back into the new WM6.1 OS to restore my contact. But after that, when i try to access my contacts, just the title page pops up momentarily for like 1 second and then it's gone.
anyone know how to fix?
thank you
kyniemxotxa98 said:
Hi, I was using the guide here: http://karhoe.net/content/view/21/1/#josc641 to upgrade my phone from WM5 to WM6.1 using Standard ROM from XDA-Developers, made by illi & rickywatt.
before flashing, i transferred a copy of the pim.vol file to my computer. after flashing, I try to transfer it back into the new WM6.1 OS to restore my contact. But after that, when i try to access my contacts, just the title page pops up momentarily for like 1 second and then it's gone.
anyone know how to fix?
thank you
Click to expand...
Click to collapse
why u not use PimBackup before flashing?
i didn't know such a software existed. excuse my ignorance.. what can i do now?
--> http://forum.xda-developers.com/showthread.php?t=269237
Looks like the structur of the pim.vol file changed from WM5 to WM6. I'm afraid you're copy is useless unless you find a way to extract your contacts.
A solution might be to reflash WM5, use your pim.vol-copy to restore the ontatcs & then use another way of backing up your contacts before flashing WM6.
Here is my situation:
I had a HTC Touch Pro T7272. A few days ago I lost this phone but ordered a new one.
I ordered the same phone, but it may have a different ROM/Radio version
For the phone I lost, I have a full backup, from 3 weeks ago. I also have the updated synced files from the day before I lost this phone. I had done a lot of tweaks and added many programs, so it would be best to restore the full backup to the new phone.
1. When the new TP arrives, should I load the Sprite backup (an .exe file) onto the new phone and run that?
2. Then sync to my desktop to get the latest file updates?
3. Do I have to load sprite backup onto the Touch Pro first? Or can I just load the backup file and double clip it to execute Restore?
4. I have .net 3.5 loaded on my desktop. Do I need to load this onto the TP BEFORE I do the Restore?
Any advice here would be greatly appreciated.
Joe_PDA said:
Here is my situation:
I had a HTC Touch Pro T7272. A few days ago I lost this phone but ordered a new one.
I ordered the same phone, but it may have a different ROM/Radio version
For the phone I lost, I have a full backup, from 3 weeks ago. I also have the updated synced files from the day before I lost this phone. I had done a lot of tweaks and added many programs, so it would be best to restore the full backup to the new phone.
1. When the new TP arrives, should I load the Sprite backup (an .exe file) onto the new phone and run that?
2. Then sync to my desktop to get the latest file updates?
3. Do I have to load sprite backup onto the Touch Pro first? Or can I just load the backup file and double clip it to execute Restore?
4. I have .net 3.5 loaded on my desktop. Do I need to load this onto the TP BEFORE I do the Restore?
Any advice here would be greatly appreciated.
Click to expand...
Click to collapse
1- You can - although it's not necessary if the backup file you created is self-restoring.
2- Yes after you've run your backup.
3- No, see my #1
4- No, unless the last backup you have doesn't include it.
Thanks for your advise C. My head is still spinning from losing my phone.
If the restore somehow messes with the phone (let's say it's got a new ROM and slightly different registry), you can always then backup your PIM data with PIM backup 2.8, then do a hard reset and restore the PIM data. If you want to get fancier, you can look through your registry and find the settings that you'd like to keep, and export those reg keys to your sd card, then import them back after a hard reset.
Since the backup file is an .exe file, can I run it from the micro sd card in the phone, or does it have to be run from the desktop?
I am sorry to tell you but, after updating to the new ROM, I tried to restore a backup taken with the old ROM and I had major problems, one of them being that the screen would not rotate when sliding out the keyboard, so I ended up hard-resetting and reinstalling all applications one by one....
Wouldn't you be better off restoring using the same ROM (as used in the backup), THEN upgrading ROMs?
This reminds me though, I don't know which ROM I had in my lost phone. Therefore I might have to reload eveerything one by one...ERRRR
Hi,
I recently did that after upgrading the ROM. I can say it works, but I'm not sure, if there are any files from the new ROM that have been replaced by old versions. You'd probably be better off just restoring your PIM data only...
CU,
Cactus World
Now I am all messed up. Please help.
1. I just received my replacement TP phone. I loaded the backup .exe file onto it but it would not execute. Error message says missing a component.
How to I get sprite backup working again? It is on my desktop.
2. I need to load .net 3.5 onto this device. I can't remember where I got it from or how I loaded it. Can someone remind me. It is actuially already loaded on my desktop.
3. I need to reload the latest version of Google Maps. Does anyone have the link?
Thanks for the help. My head is about to explode trying to get this new phone back to the previous state.
Okay, I figured out 1 & 2.
Does anyone have a link to the newest Google maps?
Does anyone know the registry setting to remove an icon on the email tabs? After doing the restore, I have 2 icons that were linked to email accounts, that no longer work. How can I get rid of them?
My last phone had "Programs" in the bottom right hand corner of Today screen. This one has "Contacts" I prefer "Programs" Does anyone know how to fix this?
I apologize if I suck at describing some of these issues. I am still beating myself up for losing the phone.
http://www.google.com/gmm/GoogleMaps.CAB
And try this for fixing those orphaned accounts - worked for me:
http://nicolasmauri.blogspot.com/2007/01/wm5-utility-recover-your-lost-mail.html
hyachts, thanks for the help. this software from Nicolas Mauri might work, but I couldn't tell from his blog. You see I have 1 or 2 extra email icons that were left from a restore. Will this program get rid of those email icons? Also, it is in .rar format so I can't use on my comouters here. I have to try my office. Is there a .cab file in the .rar file?
One more request. Does anyone know how to add the "programs" choice instead of "contacts" on the home screen (lower right hand corner)
I've always used SKtools (only) to remove installed apps with the previous windows phones. Is it adviced to use SKtools with HD2 too?
follettoverde said:
I've always used SKtools (only) to remove installed apps with the previous windows phones. Is it adviced to use SKtools with HD2 too?
Click to expand...
Click to collapse
Yes SKtools works perfectly with our device
follettoverde said:
I've always used SKtools (only) to remove installed apps with the previous windows phones. Is it adviced to use SKtools with HD2 too?
Click to expand...
Click to collapse
exelent , clean everything, just add opera cokies and opera cache to clean too , and put clean everything and thats it.....perfect
Steve0007 said:
Yes SKtools works perfectly with our device
Click to expand...
Click to collapse
Hello,
what experience do you have with SKTools-backup after a
HardReset or ROM-Update?
I updated my O2-ROM from 1.48 to 1.72. Then I tried a backup
with SKTools, but my HD2 stopped working.
I could not switch it off, so I had problems to do a new HardReset.
After I managed this, I tried to backup the pim data.
But no success. Now I'm unconfused about the backup tool.
I understand that a ROM-update is a complex thing
(also 1.48 is not much different from 1.72).
But I expect as a minimum that I can backup the pim data.
My final question is, can I expect from SKTools a (more or less)
full backup after a HardReset.
Thanks
eshd
eshd said:
Hello,
My final question is, can I expect from SKTools a (more or less)
full backup after a HardReset.
Click to expand...
Click to collapse
You are doing backup, right? Why should there be any problem?
OK, I never do any backup after a hard reset. I have done uncountably many SKTool backups, and have done a handful of SKTools restore after hard resets (fortunately not on HD2).
Why do you need to do a backup after a hard reset? If you want to go back to that status, you just hard reset again.
Move installed software.. not all possible??
Can anybody of you tell me, how I could move progs from internal storage to storage card, that do not have this option in SKTools?
Mostly this is regarding games that do not have the option to chose where to install to. They only have the option to deeply check intallation.
Is there another way to move istalled software/games than with SKTools??
Thanks for any Hint.
No help for me..?
FWIW, eshd's scenario happens to my Imagio. I recently got a refurbished unit from Verizon to replace my old Imagio (broken send key), and I used the complete backup and restore process with SKTools. Both the backup file and SKTools were on my storage card, so I just swapped the card into the new unit.
After programming the new unit over the air, I started SKTools and pointed it to the 160MB full backup. The unit automatically soft reset itself, and SKTools appeared to begin the restore process (progress screen with countdown of files transferred).
Once all the files transferred, however, the unit soft reset again and hung on the HTC logo screen. I tried this twice, and both times got the same result (I waited 20 minutes on the second time). I plan to try Sprite Backup next, as I just do not relish the idea of manually restoring all my settings to the new phone!
eshd said:
Hello,
My final question is, can I expect from SKTools a (more or less)
full backup after a HardReset.
Thanks
eshd
Click to expand...
Click to collapse
No, or (perhaps) not always!
After a HardReset I had no success with a backup with SKTools.
eshd
Hi, I just found this link download for Sprite backup. Not sure if it is a trial version or not, but it is working fine with no restictions with my HD2. Definately isn't Warez
Link is
http://handheld.softpedia.com/progDownload/Sprite-Backup-Download-58811.html
I have backed up and restored no problems, but I am wondering if anyone else has used this to restore after changing to a new ROM?
I dont want to test it in case anything goes wrong
Thanks
Edit************
Definately a trial verison for 10 days, but still good if you want to check out the software.
The link you posted is a trial version - it clearly says so on the site linked to.
I haven't used Sprite on my HD2 but used it on my TyTN II and used it to restore having upgraded the ROM from WM6 to 6.1 without a problem. However, don't take that as a guarantee that it will work on an HD2!
May you be warned.
http://forum.xda-developers.com/showthread.php?p=6239303
I am trying out SPB Backup. Hopefully, it will rescue my hardwork the next time my HD2 becomes uncontrollable.
You mean your HD2 didn't come with Sprite backup? HK versions is bundled with a full version.
Sprite Backup
Yes, I have a Malaysian device that also comes with it. Write now, after a hard reset I can't find it anymore to reinstall it. Can you help me?
thanks for the link
I tried Sprite, then bought the retail version. It does exactly what it says on the tin.
What it CAN'T do is a restore if a new rom is put on the HD2 - just won't work!
Having said that, I like it, and perform a backup frequently.
I never could get it to restore properly either
after flashing even a new ROM update. It says you can do it. They also stopped their forum and said they were just going to handle questions through support. Two emails to support never answered.
If you restore from SD card it is quick. You need to re-set your restore options each and every time. If you restore from PC you have to re-enter all your software registration data. Kind of a pain.
Restore options should be delete all files and replace not merge.
If I had it to do over again I think would try SPB Backup. Only heard good things about it.
Trial link:
http://www.spbsoftwarehouse.com/products/backup/download.html
Hi,
I have searched in the forums but i couldnt find any solution to my problem.
My phone is a LG Optimus 7 unbranded on mango.
I want to backup my phone, update it to the latest rom with tethering enabled and after that i want to restore from backup.
How can i do that?
Thanks in advance!
There is no tool that can do that right now. The backup only happens when a new updates come in and Zune does that. It cannot be done manually.
Thanks for the fast answer!
So do i have to wait for the tethering update to appear in Zune or do i have to flash another firmware?
xtrcentral said:
Thanks for the fast answer!
So do i have to wait for the tethering update to appear in Zune or do i have to flash another firmware?
Click to expand...
Click to collapse
Only Zune will be able to do it. So I guess unless they do you have no choice. And No Firmware can enable it.
wpxbox is actually incorrect, there is a tool to create an image-based backup (like Zune does when updating) on demand. Search the Development and Hacking sub-forum, and you can find it. Note that it requires a program, updatewp.exe, that was once distributed by Microsoft and no longer is, so you'll need to find a copy of it (and the version for that copy must exactly match your Zune version).
However, what you're asking for isn't actually useful anyhow, unless you want to install the update and then immediately remove it. A WP7 backup is really more properly called a restore point - it's a full image of the phone's entire storage, including the parts that are normally read-only (the ROM). Restoring that image overwrites everything, including the ROM. Updates are modifications to the ROM, and restoring a backup will therefore remove the update.
That cleared the things... Thanks.
Thanks for correcting me. Apprciate that.
Yes there is a tool which you can find here but to make it work you need to use Old version of Zune and replace couple of DLL.
I personally have tried it but for some reason it did not work for and hence I was not recommending it. But thats me.
Go ahead and give it a shot to see if it works for you. If yes let me know how you did.
--wpxbox
GoodDayToDie said:
wpxbox is actually incorrect, there is a tool to create an image-based backup (like Zune does when updating) on demand. Search the Development and Hacking sub-forum, and you can find it. Note that it requires a program, updatewp.exe, that was once distributed by Microsoft and no longer is, so you'll need to find a copy of it (and the version for that copy must exactly match your Zune version).
However, what you're asking for isn't actually useful anyhow, unless you want to install the update and then immediately remove it. A WP7 backup is really more properly called a restore point - it's a full image of the phone's entire storage, including the parts that are normally read-only (the ROM). Restoring that image overwrites everything, including the ROM. Updates are modifications to the ROM, and restoring a backup will therefore remove the update.
Click to expand...
Click to collapse
Thanks for providing the direct link. I was able to get it working, although it took a lot of work to find matching versions of the tool installer (v1, not v2) and Zune software. It's possible, though. Take a look at the Backup header in this thread: http://forum.xda-developers.com/showthread.php?t=1271963. It has instructions and links that you may be able to use to make the tool work.
Hi,
I finally poured in one complete day figuring out what was in that thread and made it work. I have written my version of making it work here
And Have also created a Video Demo as a Proof that How I made it work. Any feedback is appreciated.
The video is like 11:28 Minutes long. Where I have :
First showed what is my phone
Then created a Backup
Showed where the backup is actually stored i.e. Zune Default restore point
Reset my Phone
Used the Backup to bring it normal state.