PocketShield version 2.0 - Touch Pro, Fuze General

Unfortunately does not work on my device. Always getting error “Failed acquiring of the hook”.
Anyone tested already?
Previous version is great but this one promises some nice features…
Homepage: http://pocketshield.netserver01.com/

I have used PocketShield the past few days without any issue, both eval and retail versions. I have .NetCF 3.5 installed and stock ROM. I have ACT3.3 but haven't changed too much that I think would affect the program.

Solved
…found the issue. New version cannot coexist with PQzII (keyboard helper).

Does anyone have this application working on the Fuze. I was using 1.3 fine and now none of the 2.0 versions work without crashing on the device. Latest version I tried was 2.0.6.2 and it will crash constantly, anyone with a Fuze had any luck with this app.

Gave up on it and had too many issues on my fuze =/ It looked nice and I was going to buy it, but screw that. Until the bugs are fixed, I'll stick to SensorLock or TouchLockPro.

Kraize said:
Gave up on it and had too many issues on my fuze =/ It looked nice and I was going to buy it, but screw that. Until the bugs are fixed, I'll stick to SensorLock or TouchLockPro.
Click to expand...
Click to collapse
I like SensorLock, but it stopped working on my Fuze. Now it installs and runs fine, but doesn't lock anything! I have no idea what changed, I'm still running a stock rom.

hopper13 said:
I like SensorLock, but it stopped working on my Fuze. Now it installs and runs fine, but doesn't lock anything! I have no idea what changed, I'm still running a stock rom.
Click to expand...
Click to collapse
Same here...Now I'm using PocketShield....but not really happy. Wish SensorLock would work right and get an update. Oh well.

SensorLock also died on my fuze. I just reset the locking gesture to default. I now use TouchLockPro and it works much nicer than SensorLock.

I'm using TouchLockPro 1.5 also and really like it. Battery's great since switching from S2U2. Make sure to take a look at the registry tweaks (LockTouchPanelOnly is probably a must).

I tried the new version that was released today? or maybe a couple days ago. It worked fine for a while and I was happy. Until now. My power button has been *magically* mapped to PShield. WTF? whenever i click the power button it opens up Pshield rather than turning the screen off.

rifraf1 said:
Does anyone have this application working on the Fuze. I was using 1.3 fine and now none of the 2.0 versions work without crashing on the device. Latest version I tried was 2.0.6.2 and it will crash constantly, anyone with a Fuze had any luck with this app.
Click to expand...
Click to collapse
I've been using 2.0.6.2 for the past several days with no issues. I only use the finger slide unlock and I use the PocketShield dialer and phone plug-in.

The latest version 2.1 appears to be working well for me on the Fuze now. It has some enhancements over the 2.0.x versions that make up for the wait.

The more stuff they add the less I like it. I just want a simple easy to use screen lock to prevent "auto answering" the phone when taking it out of my pocket or case.The first version did just that. Seems like every new application starts out clean and simple, then turns into bloatware with more bugs and features then a person wants, added in. Taking over the standard dialer, pictures popping up on the screen, 30 option boxes in the menus. Ill pass on it all, I just want to lock my screen, and swipe it to unlock it period

yzf750 said:
I just want to lock my screen, and swipe it to unlock it period
Click to expand...
Click to collapse
altough i like the program, i agree with you.

Related

Tilt keyboard problem

hey. my keyboard buttons sometimes stop responding. i was just wondering if this is a software or hardware problem. it never happened until after i upgraded to the official att 6.1.
zlamma said:
hey. my keyboard buttons sometimes stop responding. i was just wondering if this is a software or hardware problem. it never happened until after i upgraded to the official att 6.1.
Click to expand...
Click to collapse
Ok well if it only hurts when you laugh stop laughing! Or in this case flash back to a 6.0 rom and see if that s your problem. If you problem is with keys not keying in correctly then run Keyboard fix cab found in the software section of the Kaiser WiKi,
Ditto Keyboard Issues after AT&T ROM Update
I also upgraded to the AT&T WM6.1 and have experienced the none responsive keyboard as well as not seeing the characters as I type. Also, the word suggestion box comes up completely empty or the characters for the words are all squished into each other. And..... the menus sometimes show nothing when selected. All works fine with the keyboard slid closed and I can see what I had typed as well.
I did try both of the keyboard fixes but to no avail. I'd rather not backgrade to 6.0 as there are features with 6.1 that I really want to be able to use.
Any thoughts?
Thanks!
You guys have cleartype enabled from what it sounds like. You can open a blank typing area (email, txt, etc.) and start typing away and watch the invisible characters appear; then close your phone and then the characters will probably appear. If that is the case, then you have cleartype enabled and it shouldn't have been.
Jason
zlamma said:
hey. my keyboard buttons sometimes stop responding. i was just wondering if this is a software or hardware problem. it never happened until after i upgraded to the official att 6.1.
Click to expand...
Click to collapse
I just had this problem occur in the past week. I was using a 6.1 ROM for the last several months without problems....
1st - flash back to an original ATT ROM and see if that fixes the problem.
2nd - Make sure your using the correct SPL
3rd - Do what I did, if all else fails and your under a 1 year manufacture warranty... return it and get a new TILT.
Cleartype Fix It
Hey, I turned off Cleartype and sure enough, that work. Thanks!

Fuze Hardware Keyboard Locks Up/Disabled

I occasionally get into a mode where the hardware keyboard is non-responsive. Nothing on it works. I'm not sure if this is a defect on my particular phone, or if I've accidentally enabled some "feature" that causes the keyboard to be locked out. A soft reset will fix the issue, but that can be very annoying...
Has anyone else seen this?
Ken98045 said:
I occasionally get into a mode where the hardware keyboard is non-responsive. Nothing on it works. I'm not sure if this is a defect on my particular phone, or if I've accidentally enabled some "feature" that causes the keyboard to be locked out. A soft reset will fix the issue, but that can be very annoying...
Has anyone else seen this?
Click to expand...
Click to collapse
I have experienced this before, where the backlight wont even activate from pressing a button, and the keyboard certainly isnt typing anything on the screen either. Although usually i can fix this by sliding the keyboard back in, and then out again.... annoying yes, but its only happened twice in the month i have had my ATT Fuze, and i havent had to reboot like you mentioned.
When running my stock AT&T rom, I had this happen almost daily. Now that I flashed a new rom, I have yet to experience it again. I had to turn off/on my device in order for it to go away before.
Same problem here.
Sliding in and out does not work any more.
Resetting doesn't work anymore either...
Time to flash to original Roms?
Keyboard lock up
This happens to me too. I noticed that it happens more frequently when I set my wifi to best performance, and then try to type something. Keyboard becomes completely unresponsive. I usually have to soft reset.
I had the problem with stock ATT rom, NATF rom, and now with RRE 4.5SE Rom. I have tried the T9 dissabler, but it also did not work. My Fuze is only a few days old...
I notice this seems to be a common problem... No one seems to have answered this in any of the posts I've read. Is there a cab or patch or reg tweak that some one has come up with to deal with this? Can some one look into this???
Thanks so much in advance!
Mitch
*Edit*
Forgot to mention that this my second Fuze, sent the other one back because it was doing the same thing...
same unsolved issue here (wants me to crack my fuze)
Ive noticed this too... but what I do to correct the problem is hit the window key. It then activates the start menu. Then press it again to exit the start menu and the keyboard magiclly works again. At least for me anyway.
I have this problem occasionally, maybe twice with the ATT stock ROM, an once with the RRE 4.5SE ROM, mine rights itself after the application is closed and re-opened after a minute or so, so Im not that bothered, it is annoying though.
Nice, I'll try that..
Try the NATF ROM
Since I've switched over to the NATF ROM I haven't had a single problem with the keyboard.
tried NAFT v4 already with the same hq keyboard lock/die/shut down issue
Ken98045 said:
Since I've switched over to the NATF ROM I haven't had a single problem with the keyboard.
Click to expand...
Click to collapse
Same issue here, happened with both stock rom and NATF 4.1
It goes away after doing some random things like others have mentioned, but still annoying.

Data problems related to S2U2??

This may be nonsense but I'm beginning to get a suspicion about S2U2 potentially being the cause of data connectivity issues for me.
I'm hoping I'm wrong because it's such a great program and I've used it on my last couple of phones.
Basically when I had my Touch HD, I had to reboot it pretty much daily if I wanted my data connection to work, otherwise I would get connectivity problems, but they would always be solved by a reboot.
I never figured out why this was, even though it was mega annoying. In the end I installed a cab to do a scheduled reset each night and it helped quite a bit.
Since I got my HD2 it has behaved perfectly as far as data is concerned and has not had a single connection fail with use every day for emails & browsing, UNTIL I installed S2U2 yesterday late afternoon, then last night it failed to connect. Yes you've guessed it, a reboot solved it.
I know that's hardly conclusive and I'm hoping it's not the case as I love using this program as an unlock screen, but I was wondering if anyone else has had any problems like this?
I was wondering if it was somehow also linked to my carrier too. The reason for this is that my friend also had a Touch HD and used S2U2 and never had this problem but he uses a different phone company. He now also has the HD2, and has installed S2U2 again and is fine, but mine is acting up, so it seems weird that it happens to both my phones but neither of his....
I know I could remove it to see if the problem goes away but programs sometimes leave bits behind when you uninstall.
Cheers
Jim
I get problems either daily or bi-daily where I have to reboot my HD2 to get my data connection to work again, (its connected but doesn't work). Every time its solved by a reboot.
I dont have S2U2 installed. If you find the reason behind the issue let me know as I am about to start doing a search into it.
Hmmm, maybe it's just coincidence then. But why would it have worked perfectly up to that point though, that's the thing that makes me wonder.
Mine also appears to be fine in terms of still displaying the GPRS signal/sign, but trying to retrieve emails or open the browser etc gives an error. It's maddening, whatever causes it!
Same thing again this morning when I told the phone to get my emails - connection failed. Worked fine after a reboot.
I'll see what happens tomorrow. If it does it again then I'm going to uninstall S2U2 and see what happens from then onwards. If it doesn't fix it then I guess it'll be a hard reset on the cards....
Back to original HD2 screen lock from 2SUS
Dear all,
Can tell how to change back to original lock after installed disable the screen lock? I don't like 2SUS needed so long to slide...
Just uninstall it, then press your windows button and hit the lock softkey.
I've removed it myself tonight even though I'm a long term S2U2 fan.
Since installing it a few days ago I've had even worse problems with ghost unlocks than before.
Previously the only issue was accidentally cutting calls off, but with S2U2 in use (standard lock disabled) I had a text from a friend on Friday asking if I was drunk. Somehow, whilst locked in my pocket it unlocked and sent a gibberish sms!
Then today, it also somehow unlocked in my pocket and dialled my mum!
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
But seriously - I love S2U2 from previous winmo phones but it's made my HD2 worse so I've uninstalled it tonight sadly.
Isn't there a working fix for these bastard hard buttons yet? I LOVE this phone but the bloody hard keys are ruining it.
Hi Cret,
Thank you so much for your response. I did remove 2SUS and selected the Screen Lock from pressing the Power buttom but it doesn't auto lock each time...
Can you tell what to do such change Registry or I need to restore the original setting?
Thank you, dude.
jakoo said:
Hi Cret,
Thank you so much for your response. I did remove 2SUS and selected the Screen Lock from pressing the Power buttom but it doesn't auto lock each time...
Can you tell what to do such change Registry or I need to restore the original setting?
Thank you, dude.
Click to expand...
Click to collapse
here we go use this cab or go to:
http://forum.xda-developers.com/showthread.php?t=583638 hack nbr 27
gdayhtc said:
here we go use this cab or go to:
http://forum.xda-developers.com/showthread.php?t=583638 hack nbr 27
Click to expand...
Click to collapse
he wanted it back... not disable...
Go to HKCU\ControlPanel\Keybd and change DeviceLockWhenSuspend to 1
This should re-enable the lock...
Thank you very much!
I will try to see it works on my HD2.
Mine was the same ie the lock would not return.
I already had BSB tweaks installed which had a toggle for the lock though, so I just activated that.
Cret said:
Same thing again this morning when I told the phone to get my emails - connection failed. Worked fine after a reboot.
I'll see what happens tomorrow. If it does it again then I'm going to uninstall S2U2 and see what happens from then onwards. If it doesn't fix it then I guess it'll be a hard reset on the cards....
Click to expand...
Click to collapse
Hi, did uninstalling S2U2 help on the connection failures?
Well, I only removed it last night but so far yes. I have not had to reboot the phone this morning and the data is working flawlessly.
Also - and this is a biggie! The battery life on the phone is MILES better without S2U2.
Normally the phone would be down to about 70% by lunchtime without even doing anything and it's still on 96% now - that's a massive improvement!
However, one thing has occurred to me as a possible cause of these issues - I've realised I was using a very old version of the program - v 1.5.
I think I'll try the latest one - 2.22 and have a look through the changelogs to see if there's anything mentioned in there along these lines.
Well, I only removed it last night but so far yes. I have not had to reboot the phone this morning and the data is working flawlessly.
Also - and this is a biggie! The battery life on the phone is MILES better without S2U2.
Normally the phone would be down to about 70% by lunchtime without even doing anything and it's still on 96% now - that's a massive improvement!
However, one thing has occurred to me as a possible cause of these issues - I've realised I was using a very old version of the program - v 1.5d.
I think I'll try the latest one - 2.22 and have a look through the changelogs to see if there's anything mentioned in there along these lines.
Here's two fixes right away in the next version relating to battery use:
- fixed the v1.50 issue of occasionally high CPU usage during idle.
- save more power than the old version when the device is sleeping.
v1.6
- removed option "Power Save" as the power leak problem is found & fixed.
I can't really be arsed reading through the rest of it but it's obvious there have been power issues addressed by subsequent versions so I'll try the latest and see how it goes.

Verizon Touch Pro2 MR2 Update

The MR2 update is out on the PCD site. Looked in some of the forums and nobody has mentioned it. Anyone install yet? I'm still downloading. Hoping for an updated Sense at least. PCD site only mentions a general update for VZNavigator, Contact Cards and Time Stamp.
Edit: I've downloaded and run the update and now I'm stuck at the starting HTC screen (now green letters on white) with the version numbers in red in bottom left. I've re-booted and sticks at the same place.
I'm having the same problem. I've heard you can go back to the MR1 update. Also, sounds like people who unlocked their phones are the ones having the issue. Anybody else have any info?
TP2 Verizon MR2 update
Found this nice summary of changes over at WMExperts:
ROM: 4.01.605.15/Radio: 2.35.00WV
Operating system has been upgraded to Windows Mobile®
6.5 COM2.5.
The HTC Sense™ user interface has been improved.
Visual Voice Mail (version 1.1.12.11) now comes preloaded on the device.
GlobalAccess Connect support. For international Internet access, you can tether your smartphone to a notebook.
Enhanced VZ Navigator® performance.
Improved auto-configuration of Daylight Saving Time.
Improved word prediction and autocorrection.
Enhanced on-screen keyboard layouts.
New, compact QWERTY keyboard option.
When composing email or text messages, type the first few letters of the recipient’s name in the To field to see a list of possible matches.
Quick setup of common email account types and an option to set up an email account manually.
However there is a problem with the update. You will need to relock it apparently to load it. Here is what they found:
Quote:
"Originally Posted by NightRaven
I also cannot boot the mr2 update. However, I dumped the rom, and rebuilt it using the boot.rgu from the MR1 update, and also removing the OEM_FLASHDRV_1.DLL module from the XIP. After flashing it did boot correctly.
I'm going to now try a straight dump and rebuild to see if it is just something in their updater thats causing the issue.
Yep, It is the boot.rgu and the OEM_FLASHDRV_1.DLL that's causing the problem!"
It is Sense 2.5, as I mentioned back in March.
One thing I noticed, is that my customized taskbar doesn't work correctly on this ROM. Some icons remain stock while others change. Some DLL's have changed names I guess.
They also mentioned that the task manager is gone, does that mean that I cant choose what to close and when to close it now?
p-
I got it last night but haven't had a chance to check it out.
You were right Brent!
I forgot about loosing the HTC taskbar. Looking forward to finally be able to add customs tabs now that I have HTC sense 2.5.
I'm having a problem getting my phone re-locked. I've gone back to the stock ROM, but when I try to run the RhodiumW_SPLRelocker_063.exe nothing happens. Any suggestions or can anyone point me to a thread that can help? Thanks!
UPDATE Sorry I'm a dufus, forgot to run it As Admin
WildCat714 said:
They also mentioned that the task manager is gone, does that mean that I cant choose what to close and when to close it now?
p-
Click to expand...
Click to collapse
segadc said:
I got it last night but haven't had a chance to check it out.
You were right Brent!
I forgot about loosing the HTC taskbar. Looking forward to finally be able to add customs tabs now that I have HTC sense 2.5.
Click to expand...
Click to collapse
Which was I right about?
For task manager, download TouchX's task manager.
does anyone plan to dump and repackage for those of us that are not rom dumpy smarty people
brent372 said:
Which was I right about?
For task manager, download TouchX's task manager.
Click to expand...
Click to collapse
I thought you were the one that said we would get it cause you saw at Verizon or something? If not nevermind lol.
Thanks I will check out that task manager.
One more thing, is their a cab to add appointments to home tab? I know there is cookie (which I did check out) but I really just want appointments without all the extra stuff. Thanks!
segadc said:
One more thing, is their a cab to add appointments to home tab? I know there is cookie (which I did check out) but I really just want appointments without all the extra stuff. Thanks!
Click to expand...
Click to collapse
I really don't know. I am not upgrading until I find a solution to getting a programs tab that actually works.
I had mentioned in a comment over at WMExperts that the taskmanager is gone... I now realize that you have to go into the All Programs to launch it, which is a drag. I miss the one on the top-right built in to the title bar
I added taskmanager to the quick links so it'll do but I'd really prefer the old one. I also miss the appointments on the homescreen. Boot time is even longer, but flipping through emails, photos and appointments in much snappier. I really enjoy the HTC Peep Twitter tab. The settings tab makeover is well appreciated too.
Overall, I really like this update though
I noticed some slow down with peep so I took it off. It was cool to have it right there but I will stick with the awesome moTweets. Too bad you couldn't add that to a tab.
edit: I do like that it locks now when I hit standby button. No more calling people by accidently (or less frequently).
htc task manager can be added so that the top right arrow is there again. It is attached to the following thread a few times. http://forum.ppcgeeks.com/showthread.php?t=125428
Hey guys Mr. X over at PPCGeeks went through and fixed the MR2 VZW Update...go to PPCGeeks website (or MightyROM website) to download it..
Did they put the good soft keyboard with the 'control' key back in this rom?
I installed MR2 yesterday and everything went fine. Until it came to running for a few hours. When the phone first boots up, everything's great, but after about an hour, it just slows to a crawl. None of the animations are smooth, just recently it took five minutes to flip from one text message to another. But, that hasn't really been so bad as about every other time I go to turn the screen back on, it just doesn't turn on and the only thing I can do is pull the battery.
Yeah, the quick links are nice, the new settings page is great and the email/text message pages flip in the same direction (seriously, who missed that in MR1?) but I went from having a nice, reliable, snappy phone, to a brick of **** that I can hardly stand to use.
I'm going back to MR1.
I was running a custom ROM on Verizon TP2. I first tried to installed the MR2 ROM and as others have said it hung on bootup. I held vol down while pressing reset and the bootloader screen will come up and if you are connected to the PC will go in to USB mode. I ran Task29 which uploaded fine but the TP2 still hung on bootup. I then went to the bootloader screen again and ran the re-lock utility over at PPCGeeks. Tried to book and still hung. Went in to bootloader again and this time reran the MR2 installed which worked and finally it boot all the way up. I still did a clear memory 1234 and everything again booted up with no problems.
I am concerned about the guy above who reported that it would slow to a crawl but many that's a result of not running Task29? Hard to imagine such a fundamental problem. I mean, I don't doubt that it happened but I can't imagine that it will happen on all installs. I just installed mine a few hours ago so I guess I'll know by tomorrow.
Good luck!!
tboneppc said:
I am concerned about the guy above who reported that it would slow to a crawl but many that's a result of not running Task29? Hard to imagine such a fundamental problem. I mean, I don't doubt that it happened but I can't imagine that it will happen on all installs. I just installed mine a few hours ago so I guess I'll know by tomorrow.
Good luck!!
Click to expand...
Click to collapse
This is/was a "clean" phone. never unlocked, no custom roms, just straight from Verizon to me to MR2 so running task29 doesn't seem necessary.
shrug. when I get some free time next year, I'll call vzw and ask them wtf happened.

Multi Touch Bug

I am having a major issue with multi touch, and it happened on stock so I don't think it's the rom I'm running (CleanRom Dev).
If I let go of my second touch, the screen loses the first touch location. So, if I am playing Minecraft or Shadowgun, I'll use one touch to move forward, that works, then I'll use one touch to move the screen, that works, but as soon as I let go of that second touch, I stop moving; even though the first touch is still being held on the screen. This happens in any game I play, even with the HTC Gestures off.
I saw a couple other people were having issues with multi touch, but I'm wondering if this is a problem with the kernel or the device. I saw that h8rift mentioned that the kernel's multi touch is a hacky implementation.
Any information is appreciated,
Thanks.
Hmm, appears to have gone away after powering off then back on after turning off HTC Gestures.
Edit:
Issue keeps coming back a few minutes after rebooting.
thebest said:
Hmm, appears to have gone away after powering off then back on after turning off HTC Gestures.
Click to expand...
Click to collapse
Yeah, same here. It took me forever to figure out that it was HTC gestures that was the culprit
Sent from my HTC One X
Same thing happening to me! Been trying all day to figure out why Gameboid was acting weird. Just tried Minecraft and something is definitely up. This wasn't a problem on CleanRom 4.1. Since flashing 4.5 I've been having this issue. Strange that you've had it since stock...
edit: already said
ThisWasATriumph said:
Same thing happening to me! Been trying all day to figure out why Gameboid was acting weird. Just tried Minecraft and something is definitely up. This wasn't a problem on CleanRom 4.1. Since flashing 4.5 I've been having this issue. Strange that you've had it since stock...
Click to expand...
Click to collapse
Hmmm, maybe this should be under CleanRom development then. I may not have had it on stock, I thought I did, but I wasn't on stock for very long
thats the same issue that we were having in AOSP ROMs which is weird since Clean ROM isn't AOSP based.
We fixed it in kernel source though.
rohan32 said:
thats the same issue that we were having in AOSP ROMs which is weird since Clean ROM isn't AOSP based.
We fixed it in kernel source though.
Click to expand...
Click to collapse
Good to know, I was just worried that my phone was jacked up D: lol
Do any of you guys use WidgetLocker? WL is known to cause issues with multitouch; I use WL, and my workaround is to simply disable it, turn my screen off and on, and reunlock with the stock launcher and multitouch works in games again. Then I turn it back on when I'm done.
I use Holo Locker does that cause issues?
samlingx said:
Do any of you guys use WidgetLocker? WL is known to cause issues with multitouch; I use WL, and my workaround is to simply disable it, turn my screen off and on, and reunlock with the stock launcher and multitouch works in games again. Then I turn it back on when I'm done.
Click to expand...
Click to collapse
Wow, that was the problem. Disabling Holo Locker, then turning the screen off and on resolved the problem. Weird....
samlingx said:
Do any of you guys use WidgetLocker? WL is known to cause issues with multitouch; I use WL, and my workaround is to simply disable it, turn my screen off and on, and reunlock with the stock launcher and multitouch works in games again. Then I turn it back on when I'm done.
Click to expand...
Click to collapse
You're a genius! Holo Locker was causing the issue. Thanks so much.
Yeah I had that problem too, it was being caused by HTC Gestures. I just turned it off because I didn't ever see myself using them.
now me too..but..
Hi, i am having the same problem that described in here but with a twist,
i noticed on my HOX on "HTC gestures" check button, it behaves the opposite from what it actually ticked.
I factory reset the device, the problem solved although the "HTC gestures" check button still behaves the opposite, after a while (hour or so) the problem with the touches repeats. i test it with the Multitouch Test app. (the only app installed).
I haven't rooted or changed the rom on the device only updated it with the official updates. last update on November, 4.1.1 , but it was great since so i don't know what triggered this.
please help...
david244 said:
Hi, i am having the same problem that described in here but with a twist,
i noticed on my HOX on "HTC gestures" check button, it behaves the opposite from what it actually ticked.
I factory reset the device, the problem solved although the "HTC gestures" check button still behaves the opposite, after a while (hour or so) the problem with the touches repeats. i test it with the Multitouch Test app. (the only app installed).
I haven't rooted or changed the rom on the device only updated it with the official updates. last update on November, 4.1.1 , but it was great since so i don't know what triggered this.
please help...
Click to expand...
Click to collapse
GOT IT. :silly::silly::silly:. (after alot of factory resets)
The trigger of the bug is If you select:
Personolize -> Lock screen style -> No lock screen
Try it.
you want to uncheck HTC Gestures. it is used for another purpose not what you think it is only used for when your phone is connected to tv.

Categories

Resources