Related
i originally had faria's wm6 on my phone, but then i wanted to try xplore core 2.0. i flashed it, but when it finished it would start. it wouldnt go past the second splash screen. i tried a hard reset using the hard keys, but when i try it, it says format failed. i have tried to reflash using bootloader using the OEM carrier roms from both t-mobile and cingular. i am having the same issue no matter what i do. if there is anything i can do to fix this.. please help me because i constantly use my wizard and i don't no what i can do without it. i really appreciate any input. thanks
im not sure what to do but i figured i'd respond just so you know people are trying to help. I've heard of the format failed problem, but im not sure what the solution was. Good luck!
What device do you have ? A G3 ?
How I fixed my Format failed problem...
This is a quote from thread
http://forum.xda-developers.com/showthread.php?t=276963&highlight=splash+screen+freezing
I followed these steps with an SD card fresh from the package...
Drug_Store said:
...
2- Get a clean SD card (in qtek 9100 / Htc Wizard case is MiniSD) with 128MB (some people say 64MB, but I personally used a 128MB, maybe a 64MB is enough)
3- Kill (task manager) wescomm.exe (this is related with activesync installed on your PC). Insert the blank SD card on the phone.
4- Get your phone in bootloader mode. Like this : Phone powered off, press Camera button + Power On, will enter in bootloader mode (RGB screen).
5- Now connect your USB cable to your phone. And start MTTY_updateROM.exe (http://wiki.xda-developers.com/uploads/romupdate.rar). After open, on Port selection, choose \\.\WCEUSBSH001 and press OK. A window will open with a blank sheet.
6- Type "r2sd all" and hit enter... wait to the end (at end shows "cmd>"). On your phone screen u can follow backup progress... small bar will appear down the RGB screen.
7- Power off the phone (or remove battery), enter bootloader mode (camera button + power on) and this time RGB won´t appear right away. Will ask if u want to "download SD image", press voice dial button to agree, and writting will begin. Wait to the end. Power off and power on normally. Now your phone should be working ok. Not even needed to reflash the phone after this.
Thanks to all and hope this helps more people with this problem
Click to expand...
Click to collapse
thanks guys... im going to try that.. and just so all of you know, its a g3
thanks everyone who helped me out. my wizard is working perfectly again. i appreciate all the help
wow that's awsome
idd, mtty is last chance weapon.
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
yes, i edited it.
I believe operator error isnt something to blame on the rom. Anyone that openly drops the "F" bomb when discussing a cell phone really should get a life.
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
anichillus said:
You are an asshole, pardon my language. My rom doesn't **** systems up, mabe you just don't know what you are doing.
I won't release any more roms. I am just tired of all this SH**. I stay calm and watch people who only know how to complain and don't give a F*** about all the work that's put up just for free, but this does it. I am giving up.
I can't afford to brick my Wizard for people like you who are simply here as ignorant sharks.
Click to expand...
Click to collapse
You sound like Faria...LOL!
Really, that's why I put what I did in my thread about saying "My phone is stuck in bootloader..." (remember the fillet knife?) ROM's DO NOT MESS UP A PHONE UNLESS THEY ARE CID LOCKED, THE FLASHING PC HAS ISSUES, OR BECAUSE OF OTHER OPERATOR ERRORS.
Don't let it get you down. You're doing a good work and if one or two people out of a thousand can't get it right, then they need to be running carrier ROMs, and you can stay calm and happy helping those who really need it.
See, that's not so bad now is it?
GldRush98 said:
woah...
Guess I'll post this...
For the record, the Core 2.0 rom ****ED my phone up too. When I tired to flash back a different rom because of all the changed **** in Core 2.0 my phone flipped out. I had to flash it 3 or 4 times to get it to even boot.
I recommend anyone thinking of tyring Core 2.0 to stay away from it unless they don't plan on changing roms after going to it.
Click to expand...
Click to collapse
i went form core 2.0 back to the tmobile rom and then to the core 2.0n and it worked fine. did you lose connection during the flash or somthing?
anichillus said:
You are an asshole, pardon my language. My rom doesn't **** systems up, mabe you just don't know what you are doing.
I won't release any more roms. I am just tired of all this SH**. I stay calm and watch people who only know how to complain and don't give a F*** about all the work that's put up just for free, but this does it. I am giving up.
I can't afford to brick my Wizard for people like you who are simply here as ignorant sharks.
Click to expand...
Click to collapse
Boy, I know more about what I'm doing then most people here put together.
Your rom ****ed my phone right in the ass.
Luckily I recovered from it.
You call your Rom "stock" yet YOU CHANGED ALL KINDS OF STUPID STUFF IN IT.
Like the alignment screen graphic?
Why the hell would you do that.
Or putting on 3 different boot screens. wtf?
Oh yeah, not to mention it runs like **** before even loading any more software on it since you used the OLD WM6 build.
Don't release any more.
You're terrible at it.
kthx bye.
jawnsixteen said:
i went form core 2.0 back to the tmobile rom and then to the core 2.0n and it worked fine. did you lose connection during the flash or somthing?
Click to expand...
Click to collapse
Nope, flash went to 100% then the phone tried to reboot and nothing happened.
I do all my flashing on that machine because it's stable and I have never had a problem flashing until the Core 2.0 rom. That is the first and only rom I have had any trouble with.
golfernutnflorida said:
I believe operator error isnt something to blame on the rom. Anyone that openly drops the "F" bomb when discussing a cell phone really should get a life.
Click to expand...
Click to collapse
OMG, he used a naughty word.
Like you don't hear it daily?
Get real.
GldRush98 said:
Boy, I know more about what I'm doing then most people here put together.
Your rom ****ed my phone right in the ass.
Luckily I recovered from it.
You call your Rom "stock" yet YOU CHANGED ALL KINDS OF STUPID STUFF IN IT.
Like the alignment screen graphic?
Why the hell would you do that.
Or putting on 3 different boot screens. wtf?
Oh yeah, not to mention it runs like **** before even loading any more software on it since you used the OLD WM6 build.
Don't release any more.
You're terrible at it.
kthx bye.
Click to expand...
Click to collapse
I do my rom as I please, you can't question that.
For YOU to know all roms have 3 (boot =NOT) splash screens You're just too SMARTass to notice.
You can quote multiple post in same message, in case that slipped your soo full-of-knowledge mind.
I used old WM6 build ? Please explain to me what you mean ...i am not that wize
I did not called my rom STOCK ! I called it Core . But you are probably too smart to actually even read anything.
In case you don't understand the word "CUSTOM", then let me explain it to you : I can change whatever i want in it. All of it if I like to.
Ah yeah, and i almoust forgot ... please read this
http://forum.xda-developers.com/showpost.php?p=1241040&postcount=1
It's been there from day 1, just made it bigger now, so that you can see too
And next time, keep your opinions to yourself. No need for public -> "Ooh, look at me how tough I am ! " stunts.
....
whether you like it or not...
I'm confused by people who choose to post cooked ROMs in a public forum, invite people to use and comment, but them complain if the feedback it not all roses and accolades.
You may have done this for free, and many if not most, appreciate your time and effort. That being said, some have legitimate complaints and are posting them because they have experienced problems with your ROM. I’ve been reading your reaction to any negative feedback and you are highly defensive, never conceding that there may be issues to address.
All cooks say that you are not responsible if the ROM bricks someone’s device or if they have problems, and no one has asked for you to pay for their repairs or replace their devices.
There is no place for foul language or insults in such a forum. It's childish and may simply help support the complainant’s point.
If this is your reaction to complaints, then yes do us all a favor and stop posting and keep your work for your personal enjoyment and benefit.
If you can't stand the heat, then get out of the kitchen. No pun intended.
Well if it doesn't work for you then try a different ROM. I tried all the ROMs and pretty much gonna stay with Faria The Real Thing
I tried Xplore 1.0 and i had alot of troube so I dont think im gonna try 2.0. If it works dont change
Funny thing is I have flashed this ROM to my wizard 6 times, and each time something else didn't work. But let me explain...
I want a stripped version of windows, I don't do any messaging at all. And since the Explorer ROMS are known for their stability, it seemed a logical choice. So I have been using package tools, to create packages with option.XML files for each package so you can choose, what parts of the OS get installed.
But back to the point...
Each time I flashed something went wrong... Something I did, a "tmail not found warning when activesync starts", to once I got a 260(?) error once when flashing at 63% so I started it while holding the voice command button. It booted into Bootloader, I flashed it to Cingular 2.25.11 and immediately flashed back to the same ROM successfully.
There are hundreds of people Ecstatic with the Xplorer ROMs, for each one of you here complaining. I for one would think it a travesty, for a few unappreciative people to ruin it for hundreds of others. By pissing off one of our cookers. Maybe had you posted your problems here we would have been able to help you.
But please don't be so accusing, just read, and if you can't find an answer. Then ask nicely, and thank the cook for the time he spends cooking for us! If you don't like the answer you get or you decide you don't like this ROM try one of the many others...
Hi all,
Does anyone know of any ill effects that ROM Flashing may have on the 8925? Specifically, is there any issue with continually flashing the device -- any possibility of corrupting anything and not being able to flash any ROM?
Just curious as I've been testing quite a few ROMs and I'm thinking of start testing my own ROMs just for the learning process.
Appreciate any feedback.
-Mike
ecltech said:
Hi all,
Does anyone know of any ill effects that ROM Flashing may have on the 8925? Specifically, is there any issue with continually flashing the device -- any possibility of corrupting anything and not being able to flash any ROM?
Just curious as I've been testing quite a few ROMs and I'm thinking of start testing my own ROMs just for the learning process.
Appreciate any feedback.
-Mike
Click to expand...
Click to collapse
For what i know, you can do till 100.000 write operations to NAND flash, so don't care about the number of flash you make
The real risk if not having the HardSPL...
Cheers.
jcepsi2005,
Just wanted to make sure.
Thanks for the reply.
-Mike
Every time you flash a device, a baby kitten dies. Please do it sparingly.
Perhaps the biggest effect of flashing comes from the amount of time we all waste playing with our toy phones!
^^ for sure
What about a black out during flashing.... on a desktop with out ups ???
Is bootloader a real protection?
I'm pretty sure there's a way around flashing a device that's had the power cut half way through. You can still get to the bootloader and flash again. Something to do with MTTY...if I remember rightly.
Could be wrong though.
Besides the increasing addiction to this site, you're probably OK. Personally I'd suggest that anyone using a PC to flash anything should consider using a UPS, a power bump is never a good thing and UPS's are pretty cheap insurance.
Since I like to cook and flash alot (as you may know if you've been hanging around the Kaiser upgrade forums ), I've managed to disconnect my device more than a couple of times while flashing. I also managed to cause a short in my USB cable that caused my laptop to reboot every time ActiveSync began transferring files, which was *REALLY* fun when flashing until I figured out what was causing it...
Getting back on topic, as long as you installed OliPro/Pof's HardSPL there is nothing to fear. All you have to do is press the reset button with the camera button to bring up the boot menu and re-flash.
There are other 'advanced' cases of flash failure which I have not encountered, which will require the use of mtty.
goestoeleven said:
Perhaps the biggest effect of flashing comes from the amount of time we all waste playing with our toy phones!
Click to expand...
Click to collapse
AMEN......wife looks at me suspicious everytime I get on this site!
^^ Your's too.
Your wives only shoot you a look? Lucky bastards...
the rom can take all the flashing...flashing your life away, thats a different story.
Holy crap! I thought I was the only one that was having issues with being on this site and the wifey getting all moody!
Maybe it was my response to her when she said to me "well since you spend so much time on that site and flicking and flashing that stupid phone then why don't you go live with it since you're always playing with it"
My response: "Maybe I will!...if only dutty can make a ROM for women then I would have more fun playing with you! Every time I get tired of you I would just flash a new ROM and have a totally different girl on the inside but the same beautiful exterior on the outside"
That comment landed me on the couch hence the reason why I'm posting at 2:20am...haahhah
jb
jbmorales said:
Holy crap! I thought I was the only one that was having issues with being on this site and the wifey getting all moody!
Maybe it was my response to her when she said to me "well since you spend so much time on that site and flicking and flashing that stupid phone then why don't you go live with it since you're always playing with it"
My response: "Maybe I will!...if only dutty can make a ROM for women then I would have more fun playing with you! Every time I get tired of you I would just flash a new ROM and have a totally different girl on the inside but the same beautiful exterior on the outside"
That comment landed me on the couch hence the reason why I'm posting at 2:20am...haahhah
jb
Click to expand...
Click to collapse
If I didn't know better I'd say we married the same woman.
goestoeleven said:
Perhaps the biggest effect of flashing comes from the amount of time we all waste playing with our toy phones!
Click to expand...
Click to collapse
And how many times our significant others scold us doing so.
tsadek said:
If I didn't know better I'd say we married the same woman.
Click to expand...
Click to collapse
haha you know how they always say theres always another you on the other side of the world somewhere.
I currently have the AT&T original WM 6.0 Rom (minus bloatware). I want to upgrade to a WM 6.1 ROM but don't want to spend alot of time reinstalling software. If I backup with Sprite Backup, should it be relatively smooth? Does it matter if I go with a "plain" WM 6.1 ROM or one with alot of programs already on the ROM which I may or may not have on the Backup file? Thanks...
I think most of our wives have the same SPL Locked boot loader (Un flashable) Mine used to tease me about having some buttons installed before she finally gave up and left me to my toys..
OK, so I've been building up the Fuze as a replacement for my moms blackjack which she's had for years and hates. I have a tilt, and love the added functionality and features that flashing it has brought (M2D to name a huge one). I would be doing the flashing of my Mom's phone, and she lives about 4 hours away, so just far enough that I don't get to see her that often. (hence not able to fix things easily for her if they don't work right)
As soon as she can get her hands on a fuze, she's getting it. Would flashing it to a ROM from here give any benefit to HER (ie she is not too technical and would she see any difference?) or should I just leave "well-enough" alone and tell her to enjoy her new phone?
Thanks guys
Shinare said:
OK, so I've been building up the Fuze as a replacement for my moms blackjack which she's had for years and hates. I have a tilt, and love the added functionality and features that flashing it has brought (M2D to name a huge one). I would be doing the flashing of my Mom's phone, and she lives about 4 hours away, so just far enough that I don't get to see her that often. (hence not able to fix things easily for her if they don't work right)
As soon as she can get her hands on a fuze, she's getting it. Would flashing it to a ROM from here give any benefit to HER (ie she is not too technical and would she see any difference?) or should I just leave "well-enough" alone and tell her to enjoy her new phone?
Thanks guys
Click to expand...
Click to collapse
i mean if she doesn't care than it really doesn't matter. This way if God forbid something happens to the phone she can just take back to warranty for replacement without first having it reverted back to stock.
However, imo a clean light cooked rom will help her have a more speedy device
There's not a clean light ROM developed for the "Fuze" yet? Atleast, I didn't think there was.
I'd never let my mum get a WM phone. Mum phones have got to come from Sainsburys or Woolworths and can't cost any more than £19.99
and i'm not so sure if your mom appreciates you asking if she should flash her fuze in public like this...
can't help with the phone issue either..sorry....
OMG...
the mere thought of that title makes my stomach twist...
Did you actually read the title before you put it up?
i've been just keeping my mouth shut
fllysurfer said:
the mere thought of that title makes my stomach twist...
Did you actually read the title before you put it up?
Click to expand...
Click to collapse
hahaha.... funny....
my 2 cents, do not flash anything because if you happen to buy a lemon, you won't have warenty to fix or exchange and let ur mom try using it first on the stock speed and apps..... because she wont be able to apprecite the flash if she's never tried the origional.
Hi,
I've had my Touch Pro for about a month and I've had enough of that stupid Vodafone start-up screen and everything!
So I've been reading up on this forum and downloaded Total Commander, Advanced Config and RegEdit and I haven't seen anything on here about ROM's on a Vodafone Touch Pro...........and I'm a bit scared of bricking my phone!
So has anyone got an idiots' guide to getting a decent ROM on my Touch Pro? I mainly just want to get rid of all the Vodafone branding and then maybe start playing about with it more!
Thanks
I've just got a Vodafone one too! And was wondering the same thing
I'll await answers from the masses
I have the UK Vodafone Touch Pro and have just changed the ROM to ROMeOS 1.40.1. The speed difference is substancial, and I would recommend it if you are willing to risk your warrenty.
Just make sure you follow all the posted advice regarding flashing your rom.
hairyman said:
I have the UK Vodafone Touch Pro and have just changed the ROM to ROMeOS 1.40.1. The speed difference is substancial, and I would recommend it if you are willing to risk your warrenty.
Just make sure you follow all the posted advice regarding flashing your rom.
Click to expand...
Click to collapse
Has it improved the handsets ability to receive a strong signal.?
gjc10212 said:
Has it improved the handsets ability to receive a strong signal.?
Click to expand...
Click to collapse
I've never had a signal problem, so I wouldnt think so. Its just an OS change, not the radio.
I have a vodafone rom and I thought the slowness was normal (I mean how would I know and different?) :S If there are alternatives, I too am interested.
I had the phone for about a month before I decided to look into the other ROMs, mainly because i'd got into the habit with my old v1606 (Hermes).
After looking at a few I eventually decided to try the ROMeOS one first, and so far I havent regreted it. It seems much faster, and the changes that have been made seem to improve the operation.
You still get the initial Vodafone boot screen then an alternate ROMeOS one, however even the boot seems much faster to me (I haven't actually timed it)
The only thing I will say is that if you like to modify TF3D then uninstall the 'HTC Manila Enhancements' using Remove Programs before you install any other mods or you may get a clash as I did.
I should add that I have only flashed ROMeOS in the last 24hrs so a full 'workout' has not been given to it yet.
Also make sure you read and follow the beginners guide in the ROM Development folder before you attempt the flash.
I have my Vodafone UK Touch Pro for 2 months. Yesterday i decided to change the ROM.
There is sooo much hype about bricking the phone but all the tools out there made it very easy for me, actually i only used 2 tools!
First download and install HardSPL
Then install the rom of your choice using the supplied .exe.
Simple, where abouts you based, could poss do it for you if you want?
I did manage to change my ROM - to the afour mentioned ROMeOS ROM - which is awesome. I did download Elite ROM but it was loaded with way too many programs for me!
It is a simple process, but I still get worried!!
I would like to change my Vodafone branded device to the Romeos rom if possible but want to know how I can make a dump of my current Vodafone ROM so If for any reason the device needs to be sent back I can shove that ROM back on?
Also, when changing roms, Is there a way to not lose your text messages?
Thanks
Regards,
Neil
Yeah - use a program called PIMBACKUP. I've backed all my stuff up about 3 times now with no problems.
You can save your original ROM, I never did as you can download the stock ROM's from here.
Read the Flashing For Newbies topic - it's invaluable. It ill have the links for the downloads you need
Touch Pro's Worst Rom
Just wanted to add my vote for hating this ROM. The red theme is horrible.
I thought I would wait a bit before flashing after shelling out £370 but this ROM was totally ruining my experience. Flashed within 12 hours of the phone arriving!!!
Can anybody who has successfully removed the Vodafone Rom and installed a new one shed some light on how they managed to do it. Ive flashed roms dozens of times on my Kaiser and the Hermes and had no problems at all but so far ive had no joy with the Touch Pro. No matter how i try and install hard SPL (either via the pc or using manual install) i never get past the black screen stage and 0% progress and then when the phone restarts nothings changed and i can no longer connect to Active Sync without hard resetting the phone and restarting the computer. I cannot use the Vodaphone Rom its so awful so im desperate for some advice.
MagicAlex - I flashed my TouchPro twice and had no problems either time. I basically followed the step by step guide which is stickied to the other ROM Developement forum.
Sorry I coudn't be more help, but that's how I did it, thanks to this wonderful forum
oh yeah ive flashed mine three times now. it turned out to be some mysterious issue with my pc. after two days of getting nowhere using Vista32 i plugged my TP into my girlsfriends laptop running Vista64 & it flashed first time. I have no idea what the issue is as i flashed my Vario2 & 3 dozens of times on my pc with no problems at all. very strange!
Hello, I have an Axim X51v that I bought off someone who didn't want to deal with it anymore. Anyway when you turn it on it hangs at the dell logo or sometimes at the windows start up logo, rarely it makes it into windows but it freezes up after a little while. I've tried flashing several different roms on it (so did the previous owner) but each time it's the same result. I've checked diagnostics mode (record+power+reset) and everything seems to check out (flash has a green zero) and every time I flash a rom it makes it through without any problems. Also the bootloader is a10_g3 is this version known to be unstable? Could it be flashed wrong? That's the only thing I can really think of.
You know this forum is for HTC devices?
Im not familiar with Dell PDA's but i cant imagine flashing roms willy nilly will work on a dell which are designed for HTC devices. Give me a link for the ROM which you are currently trying to use.
Have you tried flashing original rom back on, thats wm5 yes?
Yeah I know it's for htc devices (this is where I get roms for my kaiser). But I've also seen roms for the x51 here too and I assumed someone may know something about em here. Anyway I have the "stock" wm5 rom flashed right now (flashed with sdloader) and it's pretty much in the same shape.
We don't frown upon answering questions for other devices. This forum is meant to help people. If you can get your answer here.. cheers on that.. hope you will.
mbannick said:
Yeah I know it's for htc devices (this is where I get roms for my kaiser). But I've also seen roms for the x51 here too and I assumed someone may know something about em here. Anyway I have the "stock" wm5 rom flashed right now (flashed with sdloader) and it's pretty much in the same shape.
Click to expand...
Click to collapse
sorry wasnt meaning to sound sarcastic, ive had some experience of axim but mostly wm5, just wasnt too clear on ur issues, what exactly happens? you say it freezes but what do you do that makes it so?
Well that's the thing it freezes randomly, even just sitting there it will freeze. I want to say its the flash but every time I check it the test comes out clear. So the the only thing I can think of is the bootloader is messed up.
Ive just been to the dell support site and wow, alot of un happy people, i can see why your friend didnt want it anymore...
After doing some reading there i can only suggest you download their official rom and rom updates and see if you can get it running normally. What i dont understand is flashing a new rom should clear everything, i dont think it is the bootloader if the system boots up fully correctly, it has to be a rom issue (or hardware of course).
check out these sites, doesnt make good reading im afraid :
http://search.euro.dell.com/results...~srd=False&ipsys=False&advsrch=False&~ck=anav
http://en.community.dell.com/forums/3530.aspx?PageIndex=2
good luck and let me know how you get on.
Well as I said it takes several tries to get into windows (sometimes it wont work at all until I leave it without the battery for an hour or so) so its not booting up normally at all . Anyway I had the wm5 a12 rom on there for a while but it still has the same problems (I used sd flash since I really cant sync and flash with the way it freezes). So yeah I'm not sure what I can do
mmm.....
If youve had several different roms on it, including official ones, it could mean a hardware problem too.......
Im no chef, but i would have expected a bootloader issue to be resolved with a known working official rom?
How old is the Dell? Just a thought, have you tried the online help with a technical rep from Dell, they were good when trying to sort out an issue with my 4 year old laptop? Sorry but im running out of ideas........
Hey I think I got it! Seems the previous owner modified the battery latch. After messing around a bit I stuck a toothpick on the "button" that is depressed when the door is closed and it seems to be running perfectly stable! I even did a few resets and each time it boots just fine. Thanks to everyone who replied and offered advice.
hoorah! saved by a tooth pick, now ive heard it all haha. congrats!