Database Info

Notification Error

I recently tried to start PicselBrowser.exe from a location other than the default one. It failed and I put it back into it`s default directory and uninstalled/reinstalled it. Now every time I turn on my Apache (WM5) it tells me ''Notification Error'' ''Cannot execute /Storage Card/PicselBrowser.exe'' which is the directory that I mentioned that I had failed to start the program from. Does anyone know how I can stop this message? Thanks.

Any ideas?

Does anyone know of a forum somewhere that would be better suited for this question?

koadansc said:
I recently tried to start PicselBrowser.exe from a location other than the default one. It failed and I put it back into it`s default directory and uninstalled/reinstalled it. Now every time I turn on my Apache (WM5) it tells me ''Notification Error'' ''Cannot execute /Storage Card/PicselBrowser.exe'' which is the directory that I mentioned that I had failed to start the program from. Does anyone know how I can stop this message? Thanks.
Click to expand...
Click to collapse
Yes, that is a little easy to solve. I had that trouble a while back with another application I was messing with. Here is the solution.
Look into Windows>Start Up folder. In there you will probably see a .lnk file pointing to the OLD PicselBrowser.exe. Since you already moved the OLD PicselBrowser.exe file to a NEW location, then put it back in the same place. Your PPC thinks it is already a NEW file despite the fact that you returned the very same file to its ORIGINAL location. The solution is to replace that .lnk file by creating a shorcut of the NEW PicselBrowser.exe file in another folder, then rename that file to the same name as the one found in Windows>Start Up folder. The next step is a simple cut and paste to replace the lnk file.
The uninstall process probably leaves behind the OLD lnk file or notification to launch the NEW picselbrowser.exe file. So in reality, the lnk file is still searching for the OLD PicselBrowser.exe file. Despite the Uninstall procedure that you performed.
I hope I made it clear for you. Let us know if it works.
Good luck.
---

Thanks for the reply, I am a newb when it comes to technical PPC stuff. I looked in my startup folder and several others and found the following:
poutlook.lnk
sddaemon.lnk
Services.lnk
SpbMobileShell.lnk
None of these appear to be Picsel Browser, I also looked on my Storage Card, nata. Any other ideas? Thanks again!

koadansc said:
Now every time I turn on my Apache (WM5) it tells me ''Notification Error'' ''Cannot execute /Storage Card/PicselBrowser.exe'' which is the directory that I mentioned that I had failed to start the program from. Does anyone know how I can stop this message? Thanks.
Click to expand...
Click to collapse
Ohhhhhhhhh. I have another thoery and again very simple.
What kind of SD Card are you using? I would guess a 4GB one, isn't it? Basically what is happening is that, the built-in SD Card reader of your PPC is not fast enough to read the entire contents of the SD card when you turn it ON. To solve this issue, there should be an option from within Picsel Browser to delay its startup upon turning your device ON.
An alternative solution is to install Picsel Browser in the Main Memory rather than the SD Card.
Another alternative solution is to use a Lower Memory SD Card, say a 2GB SD Card, for faster read.
As a last resort, if you have MemMaid or a powerful Notifications Manager, just delete the pesky notification manually. Why does Picsel Browser need to be read every time you turn your device ON anyway?
Hope this helps.
---

Actually, I am running a 2 GB MiniSD Card and to be honest, I dont know why it is trying to activate PicselBrowser.exe each time I turn on the device. Let me clarify that it is not coming on every time that I do a soft reset, it is every time I press the power button on top of the device. Also, I got this same message when I first tried to run PicselBrowser in it's not default location, which is why I moved it back. Why it has been attempting that operation ever since is a complete mystery to me. Thanks for your help though. I would be clueless without you.

I guess the only thing to try now is delete the notification manually using a Notifications manager. BACKUP 1st is the RULE, before deleting an kind of Notifications.
Another extreme solution is Hard Reset and install from scratch. I know sounds horrifying specially if you have tons of stuff.
---

I'm getting exactly the same error for 'wakeup.exe' for Wisbar Advanced Desktop at the minute, I know that there has been a lot of discussion over at the lakeridge forums but most people have solved the problem by reinstalling several times.
EDIT: i think I may have fixed my problem. try installing picsel browser again without uninstalling it on your pocket pc. See if you get the message about 'all other previous versions will be deleted' just tap yes and continue to install it again. Then see what happens.
(And just as i thought i fixed it, the message appeared again)

I tried to install Picsel Browser over the existing install several times and it did nothing to the error message. I don't know what else to try, any more ideas?

Please, this is really annoying every time I turn on my phone. Any ideas?

I sitll get the same with WAD.

Hey, I fixed this problem simply by copying (NOT CUTTING) the file in question (in my case PicselBrowser.exe) to the directory that it was telling me it could not start from. Hope this helps. Cheers

koadansc said:
Hey, I fixed this problem simply by copying (NOT CUTTING) the file in question (in my case PicselBrowser.exe) to the directory that it was telling me it could not start from. Hope this helps. Cheers
Click to expand...
Click to collapse
im having this ploblem too...
please.. after deleted the app PicselBrowser... i deleted manualy the others folder files about PicselBrowser..
so i dont have this PicselBrowser.exe to move or put in other place...
can u upload the PicselBrowser.exe file...
that we need to fix this error
thanx

execute picselbrowser.exe from the installed location and delete the one wich is generating errors. It worked for me

Remiving unremovable files taking up space in windows file

I have a Tilt with wm6 and I am running low on space. I noticed in my windows folder that I have several wma files in there that I did not put in there. They are taking up around 12mb of space but the system will not let me remove them! I have Total Commander and even after changing them to a non-system file, it still won't let me remove them. Do I need them for some odd reason? If not, how can I get rid of them and recover some much desired space?
For example, there is a Gin Blossoms song, a Stylistics song?, Ted Leo Pharmacy song, Communique song, the Oranges, Ray Charles, Frightened something, Assembly of something, and I want to delete the 3G up wave file and video since I have them disabled.
Thanks loads for any help!

you'll need to cook your own rom, or find another rom to install that has all those files removed...
rom files are locked and must be removed before the rom is flashed onto your device.

I was feeling like that was the case. Oh well. Which ROM seems to be the best out there? I have read several posts about Dutty's and how good it is. Anyways, thanks alot for you response.

what i did before was to create a blank file using notepad and then save it as a wma file with the same filename as the ones i wanted to remove. then using Resco Explorer, i copied it over the original file.

i know this will give me more storage space, will it give me more ram too?

no flash ram cant be used as app ram
and for at least most devices not using all the os flash dont even yeld any
storage ram for usage

oldsap said:
what i did before was to create a blank file using notepad and then save it as a wma file with the same filename as the ones i wanted to remove. then using Resco Explorer, i copied it over the original file.
Click to expand...
Click to collapse
Oldsap! I hope you realize that by doing this, you actually accomplished NOTHING. Files in ROM can be "covered" with a different version, but they are still there, taking up the space they already did. You merely supplanted a newer version with a smaller size (maybe "0"), covering the one that was there already.
Test my theory, try deleting the 0-byte file you copied there, and miraculously, the old file will appear again, untouched, and the same size it always was.
Test my theory again ... "cover up" one of the files that's 1MB with a file by the same name, but 0 bytes. Then check your storage space, and you will see that you did not save a single byte.
This is just the way that ROM files work. The only way to get rid of them is to cook them out - period.
-pvs

Cab file downloadng?

Firstly apologies for the noob question, I'm still very new to this WinMo stuff. And secondly I've searched about the forum all day but still having problems....
I've just got an HD2 and wanting to put some of the tweaks on it I've found via this site. When downloaded on my PC I'm faced with 4 or so files, two or three perhaps starting with a 'cab' file name and the other a reg or set up file. Basically what do I then do with these files? With the phone conected via USB I went into the deice memory and dropped all the files into the memory, did a soft reset, but nothing happened, no extra feature etc. Phone just started up as normal. Sorry for my 'thickness' lol. Would welcome any advice or a pointer to somewhere where it may be already written.
Thanks.

Do not unzip the .cab place on phone and browse phone with File Explorer, click on the .cab and install to Device....
It's a common noob mistake as .cab's are compressed archives so look like .zips on computer....

Thanks for the quick reply, I'll give that a go....

after dropping them on the device you have to run them. Open File Explorer and just launch them from there. A setup will be launched usually.

Thanks for the above advice, worked a treat.

Well I've had no problem putting cab files onto my HD2, however now I want to remove a few of them. Not sure how to remove the actual thing that I've changed??? I go into the device memory and I can delete the cab itself but the 'change' still remains, such as new task bar icons etc.
Any help appreciated....

settings -> add remove programs
just like on a computer

Oh yes of course, makes sense now. Many thanks

strange files

so I sync yesterday and notice 3 folders with characters not normally allowed. one contains all "?" while another has / and ?. when I try to delete, system can't since they contain these characters. and I can't find them using total command. any help?

You need to provide more infomation so we can help you .
Which version are you using (WM 6, 6.5, 6.5.3 etc.)? Where are the folders located? Do they contain files?

Sorry. Runninng WM6.5 stock verizon ROM with TF3D 2.0 on my Imagio. And they don't contain any files. I can open, but when I go to delete, it says files cannot contain the following symbols blah blah blah. And I can't seem to find them using TC.

anyone got anything?

Hi Jerry,
JerryA said:
anyone got anything?
Click to expand...
Click to collapse
Are the folders on the SD card ? My suggestions below:
1) If they are, try deleting them from the Windows PC side via an ActiveSync connection or in "Disk drive mode".
2) Try renaming the folders with 'proper characters' and then delete.
3) If in "disk drive mode", try removing them via DOS command. You may want to do a "dir /X" to see the 8.3 short file/folder name and remove them.
Regards.
________________________________
* Today is yesterday's tomorrow. Today is also tomorrow's yesterday.
Then is the present the past's future or the present is the future's past. *

Hi Jerry,
JerryA said:
anyone got anything?
Click to expand...
Click to collapse
Are the folders on the SD card ? My suggestions below:
1) If they are, try deleting them from the Windows PC side via an ActiveSync connection or in "Disk drive mode".
2) Try renaming the folders with 'proper characters' and then delete.
3) If in "disk drive mode", try removing them via DOS command. You may want to do a "dir /X" to see the 8.3 short file/folder name and remove them.
Regards.
________________________________
* Today is yesterday's tomorrow. Today is also tomorrow's yesterday.
Then is the present the past's future or the present is the future's past. *

No, they aren't on the SD card, they are phone memory. Whenever I try to rename them, I get the same error code, telling me files cannot contain the following..... And as for the last, I don't know anything about DOS, so that would require a level of expertise that I just don't have. I haven't seen any strange behaviour on the phone, and my memory size and usage has not freaked out, nor has my battery life. So what they are or what they are for is beyond me.
The 3 files are names thus:
??????
????Documents
oc????
Very odd.

JerryA said:
No, they aren't on the SD card, they are phone memory. Whenever I try to rename them, I get the same error code, telling me files cannot contain the following..... And as for the last, I don't know anything about DOS, so that would require a level of expertise that I just don't have. I haven't seen any strange behaviour on the phone, and my memory size and usage has not freaked out, nor has my battery life. So what they are or what they are for is beyond me.
The 3 files are names thus:
??????
????Documents
oc????
Very odd.
Click to expand...
Click to collapse
Jerry,
My suggestions are only if the files reside on the SD card.
I believe the ? means the available fonts, on your phone, does not have the correct character set to display it properly.
Base on my belief above, try the following:
a) My apology being a new member, I am not allowed to post clickable link. Go to this link : add a http:// in front first
forum.xda-developers.com/showthread.php?p=5869460
b) Download and install the "Droid Sans Font.cab" to your phone in post #9. Alternatively, search for the file, arialuni.ttf, (Arial Unicode MS) first on your Windows PC if not then on the web and copy it to your phone, \Windows\Fonts directly. This is a 22Mb file !
c) Restart your phone and see if those files are showing proper characters.
d) If it does, then go ahead, open it and see what's the content like. Rename the file then delete. Uninstall the "Droid Sans Font.cab" if you wish. Personally, I don't like the font as the characters are rasterised.
Regards.

ugh, too much work. My phone isn't acting up, and even though I don't like uninvited strangers, they aren't eating up resources, and my phone is still functioning properly. I will keep these files you suggested handy in case something does start acting up, and see what happens.
yea, I am lazy when it comes to electronic stuff. Thanks for the info!

If you have SK Tools (or a similar app), try scanning the memory. It sounds like you have corrupted files or a corrupted directory. It may not be causing issues now, but it could cause issues sooner rather than later. You may also think about backing up everything now while you can.

JerryA said:
No, they aren't on the SD card, they are phone memory. Whenever I try to rename them, I get the same error code, telling me files cannot contain the following..... And as for the last, I don't know anything about DOS, so that would require a level of expertise that I just don't have. I haven't seen any strange behaviour on the phone, and my memory size and usage has not freaked out, nor has my battery life. So what they are or what they are for is beyond me.
The 3 files are names thus:
??????
????Documents
oc????
Very odd.
Click to expand...
Click to collapse
oh no i have the same problem. but the strange files are on my storage card. i am backing up my storage card them i am going to format.

Need names of default files on htc

I accidentally erased a name of a file using total commander and can't undo myself.
My files show:
//Plugins
Application Data
ConnMgr
Content
Documents and Settings
Music
My Documents
Programs
Storage Card
Temp
Windows
and "wrong name because I deleted it" (in the folder is Manilla_20100401....)
Can someone please let me know what that file name should be? Most of my programs won't fully launch now because of it.
Thank you for your help.
Michael

Just hard reset your phone. That's always an easy fix that's sure to work

I just had this phone replaced due to warranty and had finished reinstalling lots of items but stupidly hadn't made a backup. I was in fact only opening total commander to make certain it was working when I accidentally deleted the file name. I would hate to hard reset when it is just a single file name that needs replaced .... I hope.

Do you have SK Tools? If so, this is a piece of cake. Open the database tool and export Replstor as an .xml. Open it with notepad on your PC and find the name of the file or folder (and its contents) in the list. There could be a few thousand entries, so it may take a while.

Farmer Ted--I don't find any of my file names from my device in this document. Thank you for the suggestion but I am still at a loss for the original names of the folders under My Device.
If only I knew someone with an HTC Fuze, I could just look on their panel under My Device. Unfortunately, most of my folk are Iphone zealots. Their advice usually involves a different purchase!
Michael

Well, I realized after I posted that if you somehow deleted one of the databases, then it won't show up in replstor, because they're all excluded from replstor. Most of them can't be deleted, though. You should have mxip_initdb.vol, mxip_lang.vol, mxip_notify.vol, mxip_swmgmt.vol and mxip_system.vol. If you're missing one of them, then look in the\windows folder and find the rom version and copy it to the root of the device. It may not have everything it needs in it, though. Just post up if you're missing one, and I can probably tell you how to fix it (well, maybe, lol).

Thanks FarmerTed, I'll give it a go as soon as I understand what it means! Just to clarify, I didn't delete any files. I renamed it. Not on purpose. These are just the basic files under My Device.

I've renamed stuff before, too. The best thing to do if you catch yourself is to delete the entire name, then highlight another file. The messed up file will go back to the original name.

shoot. doesn't work. It would have if I would've done that in the first place though, so that is good to know.