I recently tried to start PicselBrowser.exe from a location other than the default one. It failed and I put it back into it`s default directory and uninstalled/reinstalled it. Now every time I turn on my Apache (WM5) it tells me ''Notification Error'' ''Cannot execute /Storage Card/PicselBrowser.exe'' which is the directory that I mentioned that I had failed to start the program from. Does anyone know how I can stop this message? Thanks.
Any ideas?
Does anyone know of a forum somewhere that would be better suited for this question?
koadansc said:
I recently tried to start PicselBrowser.exe from a location other than the default one. It failed and I put it back into it`s default directory and uninstalled/reinstalled it. Now every time I turn on my Apache (WM5) it tells me ''Notification Error'' ''Cannot execute /Storage Card/PicselBrowser.exe'' which is the directory that I mentioned that I had failed to start the program from. Does anyone know how I can stop this message? Thanks.
Click to expand...
Click to collapse
Yes, that is a little easy to solve. I had that trouble a while back with another application I was messing with. Here is the solution.
Look into Windows>Start Up folder. In there you will probably see a .lnk file pointing to the OLD PicselBrowser.exe. Since you already moved the OLD PicselBrowser.exe file to a NEW location, then put it back in the same place. Your PPC thinks it is already a NEW file despite the fact that you returned the very same file to its ORIGINAL location. The solution is to replace that .lnk file by creating a shorcut of the NEW PicselBrowser.exe file in another folder, then rename that file to the same name as the one found in Windows>Start Up folder. The next step is a simple cut and paste to replace the lnk file.
The uninstall process probably leaves behind the OLD lnk file or notification to launch the NEW picselbrowser.exe file. So in reality, the lnk file is still searching for the OLD PicselBrowser.exe file. Despite the Uninstall procedure that you performed.
I hope I made it clear for you. Let us know if it works.
Good luck.
---
Thanks for the reply, I am a newb when it comes to technical PPC stuff. I looked in my startup folder and several others and found the following:
poutlook.lnk
sddaemon.lnk
Services.lnk
SpbMobileShell.lnk
None of these appear to be Picsel Browser, I also looked on my Storage Card, nata. Any other ideas? Thanks again!
koadansc said:
Now every time I turn on my Apache (WM5) it tells me ''Notification Error'' ''Cannot execute /Storage Card/PicselBrowser.exe'' which is the directory that I mentioned that I had failed to start the program from. Does anyone know how I can stop this message? Thanks.
Click to expand...
Click to collapse
Ohhhhhhhhh. I have another thoery and again very simple.
What kind of SD Card are you using? I would guess a 4GB one, isn't it? Basically what is happening is that, the built-in SD Card reader of your PPC is not fast enough to read the entire contents of the SD card when you turn it ON. To solve this issue, there should be an option from within Picsel Browser to delay its startup upon turning your device ON.
An alternative solution is to install Picsel Browser in the Main Memory rather than the SD Card.
Another alternative solution is to use a Lower Memory SD Card, say a 2GB SD Card, for faster read.
As a last resort, if you have MemMaid or a powerful Notifications Manager, just delete the pesky notification manually. Why does Picsel Browser need to be read every time you turn your device ON anyway?
Hope this helps.
---
Actually, I am running a 2 GB MiniSD Card and to be honest, I dont know why it is trying to activate PicselBrowser.exe each time I turn on the device. Let me clarify that it is not coming on every time that I do a soft reset, it is every time I press the power button on top of the device. Also, I got this same message when I first tried to run PicselBrowser in it's not default location, which is why I moved it back. Why it has been attempting that operation ever since is a complete mystery to me. Thanks for your help though. I would be clueless without you.
I guess the only thing to try now is delete the notification manually using a Notifications manager. BACKUP 1st is the RULE, before deleting an kind of Notifications.
Another extreme solution is Hard Reset and install from scratch. I know sounds horrifying specially if you have tons of stuff.
---
I'm getting exactly the same error for 'wakeup.exe' for Wisbar Advanced Desktop at the minute, I know that there has been a lot of discussion over at the lakeridge forums but most people have solved the problem by reinstalling several times.
EDIT: i think I may have fixed my problem. try installing picsel browser again without uninstalling it on your pocket pc. See if you get the message about 'all other previous versions will be deleted' just tap yes and continue to install it again. Then see what happens.
(And just as i thought i fixed it, the message appeared again)
I tried to install Picsel Browser over the existing install several times and it did nothing to the error message. I don't know what else to try, any more ideas?
Please, this is really annoying every time I turn on my phone. Any ideas?
I sitll get the same with WAD.
Hey, I fixed this problem simply by copying (NOT CUTTING) the file in question (in my case PicselBrowser.exe) to the directory that it was telling me it could not start from. Hope this helps. Cheers
koadansc said:
Hey, I fixed this problem simply by copying (NOT CUTTING) the file in question (in my case PicselBrowser.exe) to the directory that it was telling me it could not start from. Hope this helps. Cheers
Click to expand...
Click to collapse
im having this ploblem too...
please.. after deleted the app PicselBrowser... i deleted manualy the others folder files about PicselBrowser..
so i dont have this PicselBrowser.exe to move or put in other place...
can u upload the PicselBrowser.exe file...
that we need to fix this error
thanx
execute picselbrowser.exe from the installed location and delete the one wich is generating errors. It worked for me
Related
Since I can't post in the q & a forum I am posting here but mods feel free to move it. So I have a wm6.1 device and a Mac computer and I regularly send files, like cab and music files with out an issue. However, today I noticed that I send a music file like usual and the file is no where to be found on the devices however space about the same size as the file is being taken up. So I send another two files(one music and one cab file) with out an issue at all. Then later on I send a cab file, but I don't see it on the device even though space is being take up. This may have happened prior to this, but I didn't realize it or something. So how can A) regain that space by deleting those files not showing up, or B) find the files that are not showing up and use them as I intended to. I am loosing space because of this. Option of last(and I mean last) resort is a hard rest which I don't like to do. Thank you....
yrsmart said:
Since I can't post in the q & a forum I am posting here but mods feel free to move it. So I have a wm6.1 device and a Mac computer and I regularly send files, like cab and music files with out an issue. However, today I noticed that I send a music file like usual and the file is no where to be found on the devices however space about the same size as the file is being taken up. So I send another two files(one music and one cab file) with out an issue at all. Then later on I send a cab file, but I don't see it on the device even though space is being take up. This may have happened prior to this, but I didn't realize it or something. So how can A) regain that space by deleting those files not showing up, or B) find the files that are not showing up and use them as I intended to. I am loosing space because of this. Option of last(and I mean last) resort is a hard rest which I don't like to do. Thank you....
Click to expand...
Click to collapse
get a good file browser and search for the missing files. You may want to use a wild card search (*.cab,*.mp3)
if you still can not find them look in the folders in /Windows and /Temp or or equivalent on the device
well i am using total commader so I dunno how good that is or not. Not to mention I have done what you suggested and even searched for files added with in the last 3 days and nothing on all fronts but yet the sapce is being taken up by something that I can't seem to find on my device. Memory maid was no help either(granted I only did a clean up). But thank you.
have you tried using the default file explorer?
I have an edited htchomesettings.xml that i want to put on my jade.
Everytime i try to drag 'n drop this file into my windows folder, i get the 'acced denied, be sure the file isn't read-only, in use or that you have enough space left'-error.
When looking at the file's properties (with Resco or total commander) it seems to be fixed in the Rom and i think that's the reason i can't overwrite it.
I already googled it and found some topics concerning this problem, and generally they all give the same advice:
http://forum.xda-developers.com/showpost.php?p=2736263&postcount=500
the problem is, i already used both programs, and apparently it does not seem to work, or i'm doing it wrong or i'm overlooking something...
So, can anyony tell me how to overwrite this file with total commander or resco, if this is possible.
Many thanks, and sorry if this is a stupid question, i searched the web for about 3 hours before asking you guys .
It's a little easier than that. The only thing you need to do is make sure that the plugin is not running. In other words, deactivate the plugin in the Settings menu. Then, do a soft reset, just to make sure that the system has stopped using it. Then you can copy and paste with any program that you like. I have found that using a PC (via ActiveSync) works best. Good luck!!
Thanks for the quick reply thunder.
Unfortunately, it did not work out. I deactivated TouchFlo already (and did the reset). And still it gives me the same error.
"Cannot copy HtcHomeSettings. Make sure your device has sufficient memory, that the file is not set as read-only, and that you have permission to copy this file type"
This time I simply used Active sync as you told me.
Again, does it have something to do with the fact that this file is hardcoded on the rom?
rubain013 said:
Thanks for the quick reply thunder.
Unfortunately, it did not work out. I deactivated TouchFlo already (and did the reset). And still it gives me the same error.
"Cannot copy HtcHomeSettings. Make sure your device has sufficient memory, that the file is not set as read-only, and that you have permission to copy this file type"
This time I simply used Active sync as you told me.
Again, does it have something to do with the fact that this file is hardcoded on the rom?
Click to expand...
Click to collapse
Unfortunately, if it is built into the rom, you will probably have a hard time copying over it. Have you tried to edit the file directly on the phone? I believe that there are a few xml editors for ppc floating out there, you could try that. Also, is there anything in particular that you want to do that requires you to modify the xml? Reason I am asking is because you could use M2D Customizer if you are only looking into modifying some settings. Hope this helps...
Allright, found out how to overwrite it!
Made a .m2dct file containing my preferred theme and settings, then i edited the included HtcHomeSettings.xml file.
Then i used the M2D customizer to load the .2mdct file, and that worked perfectly.
Thanks for the hint, Thunder!
Firstly apologies for the noob question, I'm still very new to this WinMo stuff. And secondly I've searched about the forum all day but still having problems....
I've just got an HD2 and wanting to put some of the tweaks on it I've found via this site. When downloaded on my PC I'm faced with 4 or so files, two or three perhaps starting with a 'cab' file name and the other a reg or set up file. Basically what do I then do with these files? With the phone conected via USB I went into the deice memory and dropped all the files into the memory, did a soft reset, but nothing happened, no extra feature etc. Phone just started up as normal. Sorry for my 'thickness' lol. Would welcome any advice or a pointer to somewhere where it may be already written.
Thanks.
Do not unzip the .cab place on phone and browse phone with File Explorer, click on the .cab and install to Device....
It's a common noob mistake as .cab's are compressed archives so look like .zips on computer....
Thanks for the quick reply, I'll give that a go....
after dropping them on the device you have to run them. Open File Explorer and just launch them from there. A setup will be launched usually.
Thanks for the above advice, worked a treat.
Well I've had no problem putting cab files onto my HD2, however now I want to remove a few of them. Not sure how to remove the actual thing that I've changed??? I go into the device memory and I can delete the cab itself but the 'change' still remains, such as new task bar icons etc.
Any help appreciated....
settings -> add remove programs
just like on a computer
Oh yes of course, makes sense now. Many thanks
so I sync yesterday and notice 3 folders with characters not normally allowed. one contains all "?" while another has / and ?. when I try to delete, system can't since they contain these characters. and I can't find them using total command. any help?
You need to provide more infomation so we can help you .
Which version are you using (WM 6, 6.5, 6.5.3 etc.)? Where are the folders located? Do they contain files?
Sorry. Runninng WM6.5 stock verizon ROM with TF3D 2.0 on my Imagio. And they don't contain any files. I can open, but when I go to delete, it says files cannot contain the following symbols blah blah blah. And I can't seem to find them using TC.
anyone got anything?
Hi Jerry,
JerryA said:
anyone got anything?
Click to expand...
Click to collapse
Are the folders on the SD card ? My suggestions below:
1) If they are, try deleting them from the Windows PC side via an ActiveSync connection or in "Disk drive mode".
2) Try renaming the folders with 'proper characters' and then delete.
3) If in "disk drive mode", try removing them via DOS command. You may want to do a "dir /X" to see the 8.3 short file/folder name and remove them.
Regards.
________________________________
* Today is yesterday's tomorrow. Today is also tomorrow's yesterday.
Then is the present the past's future or the present is the future's past. *
Hi Jerry,
JerryA said:
anyone got anything?
Click to expand...
Click to collapse
Are the folders on the SD card ? My suggestions below:
1) If they are, try deleting them from the Windows PC side via an ActiveSync connection or in "Disk drive mode".
2) Try renaming the folders with 'proper characters' and then delete.
3) If in "disk drive mode", try removing them via DOS command. You may want to do a "dir /X" to see the 8.3 short file/folder name and remove them.
Regards.
________________________________
* Today is yesterday's tomorrow. Today is also tomorrow's yesterday.
Then is the present the past's future or the present is the future's past. *
No, they aren't on the SD card, they are phone memory. Whenever I try to rename them, I get the same error code, telling me files cannot contain the following..... And as for the last, I don't know anything about DOS, so that would require a level of expertise that I just don't have. I haven't seen any strange behaviour on the phone, and my memory size and usage has not freaked out, nor has my battery life. So what they are or what they are for is beyond me.
The 3 files are names thus:
??????
????Documents
oc????
Very odd.
JerryA said:
No, they aren't on the SD card, they are phone memory. Whenever I try to rename them, I get the same error code, telling me files cannot contain the following..... And as for the last, I don't know anything about DOS, so that would require a level of expertise that I just don't have. I haven't seen any strange behaviour on the phone, and my memory size and usage has not freaked out, nor has my battery life. So what they are or what they are for is beyond me.
The 3 files are names thus:
??????
????Documents
oc????
Very odd.
Click to expand...
Click to collapse
Jerry,
My suggestions are only if the files reside on the SD card.
I believe the ? means the available fonts, on your phone, does not have the correct character set to display it properly.
Base on my belief above, try the following:
a) My apology being a new member, I am not allowed to post clickable link. Go to this link : add a http:// in front first
forum.xda-developers.com/showthread.php?p=5869460
b) Download and install the "Droid Sans Font.cab" to your phone in post #9. Alternatively, search for the file, arialuni.ttf, (Arial Unicode MS) first on your Windows PC if not then on the web and copy it to your phone, \Windows\Fonts directly. This is a 22Mb file !
c) Restart your phone and see if those files are showing proper characters.
d) If it does, then go ahead, open it and see what's the content like. Rename the file then delete. Uninstall the "Droid Sans Font.cab" if you wish. Personally, I don't like the font as the characters are rasterised.
Regards.
ugh, too much work. My phone isn't acting up, and even though I don't like uninvited strangers, they aren't eating up resources, and my phone is still functioning properly. I will keep these files you suggested handy in case something does start acting up, and see what happens.
yea, I am lazy when it comes to electronic stuff. Thanks for the info!
If you have SK Tools (or a similar app), try scanning the memory. It sounds like you have corrupted files or a corrupted directory. It may not be causing issues now, but it could cause issues sooner rather than later. You may also think about backing up everything now while you can.
JerryA said:
No, they aren't on the SD card, they are phone memory. Whenever I try to rename them, I get the same error code, telling me files cannot contain the following..... And as for the last, I don't know anything about DOS, so that would require a level of expertise that I just don't have. I haven't seen any strange behaviour on the phone, and my memory size and usage has not freaked out, nor has my battery life. So what they are or what they are for is beyond me.
The 3 files are names thus:
??????
????Documents
oc????
Very odd.
Click to expand...
Click to collapse
oh no i have the same problem. but the strange files are on my storage card. i am backing up my storage card them i am going to format.
I've been looking for hours for a work-around for this, but no luck, so I finally caved in and am asking for help.
I was backing up my sd card to my computer so I could format it.
While doing so, I was prompted with an error that said my path was too long.
I am on windows 7, and I know there is something like a 260 character limit for path names.
So I just made a new folder with a shorter name/path, and copied the files there.
This was good, as I thought I did a good job of figuring something out on my own.
So the problem lies when I want to put all of the files/folders back on my sd card.
I need them back in the folder they came from and I am not allowed to do that.
If anyone has any suggestions, it would be much appreciated.
BTW, the path is F:\Android\data\com.google.android.apps.books\files\volumes\Y7sOAAAAIAAJ
and I need to put the \res folder in there which contains files like
aHR0cDovL2Jvb2tzLmdvb2dsZS5jb20vYm9va3M_aWQ9WTdzT0FBQUFJQUFKJnBnPWNvbnRlbnQtMDA0MCZpbWc9MSZ6b29tPTYmaGw9ZW4mY2RzPTImc2lnPUFDZlUzVTBKb3lRRDA1dFQ4Zm1GSW94LVREUzhIMjlYcGcmdz00ODAmaD0zOTU=
I don't know what this file/folder is for. It looks like it would be something to do with books, but I have never had an app that had anything to do with books, and since its in the \Android\data\ path it looks important to me.
Do I need this folder? will it regenerate itself when said app runs?
Or am I just a complete idiot and I should just delete it and get on with my life?
Thanks in advance
I had the same problem recently. I just skipped them with no consequence. Google Books is the e-reader app for Books purchased through the Market. I actually have books from the market and I still did not encounter an issue. So you should be fine just to skip them.
Long Path error fixer solution
Just simply download long path error fixer. Here is the link:
wwwlongpathtoolcom
I tried this and its very helpful software!
Long Path Tool
If File Path is too long then I would like to suggest you, try Long Path Tool program to resolve this issue.
Thanks for share
Path name too long
I suggest you try Long path tool is the very good program for easily delete, copy & rename long path files, error, unlock solution.
Try it and solve your problem.