Every time i take the phone (MD4 T-mobile) when its ringing i touch the screen and then the call is gone.
Is there something to lock the phone even when its ringing and then unlock it with 1 key only?
I hope someone can help me.
Bye bye
Just push the 'end phone'key for 2 or 3 sec, then it wil lock.
Unlock by touchin' softkey left corner en 'unlock' in middle of the screen.
I prefer S2U2 myself.
PocketShield rulezzzz!
http://pocketshield.netserver01.com/
This is the golden tip if its working on my phone. Thanks guys or girls, i'm going to dowload it right away.
Til laterz thanks again!
i like sensor lock
check it out in diamond forum
It works okay. O man i am glad i received this replay for pocketshield. Thanks many times. It works perfect on the T-Mobile MDIV. Thanks again
Related
Hi,
I've got a problem with my Trinity, where if it rings and I pull it out of my pocket, sometimes one of the buttons gets pushed as it rubs past the material, so either the call can be hung up on or it gets answered before I can see who's calling.
I also get a similar problem if a calendar alarm goes off, or if there is a text message. Sometimes these can be dismissed before I get a chance to see what is causing the notification.
I guess this is a problem on many PPC phones which dont have a cover. Does anyone else experience this?
Does anyone know of any way to solve this? Perhaps having a secondary lock button which needs to be pressed before the hard buttons become active or something like that...?
I guess it would need some software installed, as I havent found any way to do this through the normal settings.
Thanks for any suggestions!
Cheers,
Ben
My Jasjam comes with a screen lock. Once this is activated you first need to press the unlock button which gets assigned to the left soft key followed by another button on the screen. Quite effective I would say.
Regards
srmz said:
My Jasjam comes with a screen lock. Once this is activated you first need to press the unlock button which gets assigned to the left soft key followed by another button on the screen. Quite effective I would say.
Regards
Click to expand...
Click to collapse
Hi,
Is this the same as the "Device Lock"?
My phone has this too, but it doesn't work for when there is an incoming call...ie you dont have to unlock the phone first to press the green "handset" button.
Ben
Hi Ben,
I have been having the same issue as you with my Jasjam. I tried using a hard case which was just too bulky and annoying, so I've since used something like those iPod socks and just keep it in my pocket. I just take extra care when pulling it out so it doesn't knock the green answer key. I think this is just something we're just going to have to get used to unfortunately.
It´s possible lock the red and green button, (received and cancel calls) when i lock my phone?
I want that because when i put my S200 in the pocket, sometimes i really answer the call.
It´s possible?
I verry often have the same problem and for me I decided to physicaly grind down this buttons... If it is possible, i don't know.
Anyone a better solution?
Same problem here
Hi, I got the same problem, missing calls every day.
is there any possibility to have the buttons e.g. pressed 3 times to get an call answered?
Thanks!
I appreciate every solution!
Jan
well you all can have my dopod 818pro. My Red and green buttons have just stopped responding. Everything else seems to work fine but maybe god heard your prayer and disabled the red and green buttons on my phone for no reason at all
;-)
lock, lock...
Hello,
I also have this problem, I use a program that replaces the dialpad: DAD Touch Smartdial 25_24516, which locks the green button. You can call that when there is a number typed Otherwise, the green key is inoperative.
I hope you understand my English just a translation of google.
good chrismas
Hi
I have a wm6 rom and in Start > Configuration > Personal > Buttons I have an option like I show in the attached file.
I don't know if you are looking for.
Merry Christmas
open password...help..
HELP ME...
My DOPOD 818 Pro can't open a device lock anymore because a password is change.
In phone screen is type "emergency phone calls can be made" and then "Password you typed is incorrect"
how to open that password?because hard reset cant open 2..
help me..
thanks
sorry if my english not good
anything im missing guys?
after flashing with the new ATT wm6 all works fine except the screen backlight keps coming on, even after pressing the screen off button it comes back on after a few secs.
peeps. anyone experience this?
i had the same problem
u cent stop it by turning your screen brightnes to 50% or above (using palm bult in brightness program (press function button (the white spot) + "P" ))
vladimir2989 said:
i had the same problem
u cent stop it by turning your screen brightnes to 50% or above (using palm bult in brightness program (press function button (the white spot) + "P" ))
Click to expand...
Click to collapse
woohoo! problem solved, thanks man!
My Voda WM6 works fine with backlight set to 40%
Sigh...I should have come here to see the solution first before I hard reset my phone.
I got the same problem, but I perform a hard reset to resolve it.
Guys I posted this on another thread here but I thought I'd mention it here as well just in case you guys can help me out.
I have my Treo 750v to connect to the net and check for emails every 30 minutes but whenever it does, the screen comes on!
Is there anyway I can get around this?
I would appreciate any help.
Thanks.
D.C
Dead Cell said:
Guys I posted this on another thread here but I thought I'd mention it here as well just in case you guys can help me out.
I have my Treo 750v to connect to the net and check for emails every 30 minutes but whenever it does, the screen comes on!
Is there anyway I can get around this?
I would appreciate any help.
Thanks.
D.C
Click to expand...
Click to collapse
Stupid as it sounds, this does appear to be a bug in the Treo WM6 update. It's still there in 2.23 VF as well. If you have Keyguard set to kick in at screen off and you set the brightness to anything other than 20% or 60% (at least for me) then the screen keeps turning on and often won't turn off after the 1 minute timeout. Got mine at 60% and its fine.
I updated my Imate-Jamin(PM300) yesterday from WM5 to WM6 & everything was fine.But today morning i tried to unlock phone(new sliding type lock was also there in update) by moving slide sidewards but unfortunately it is stuck after moving to side.From there iam able to move slide back to normal position.
Bcoz of this iam not able to use my phone is there any way to unlock it and also about any other lock for jamin.
I also wanna know that is there any problem for pressing switch off button after using mobile as it helps to switch off screen
Pls reply me as iam not having any idea about this plssssssss........
Thnx in advance
just soft-reset your phone...it's done
Stay cool....
cheers!!!
Aju
Hi guys,
Strange things started to happen after my OTA 2.3.4 upgrade yesterday. Maybe it is a coincidence but 5-6 hours after I did an upgrade my lock ring started not to work that smooth as before and I'm completely sure I didn't have it yesterday ! I mean - very often I can't drag this lock ring into the middle of the screen to unlock. It simply does not follow my finger and goes back to the bottom of the screen. The other thing - my back button refuses to work occasionally. For the first time (after two weeks of usage) I was not able to use it, no response at all ! I need to push the button 4-5 times and then it starts working. It is easily repeatable - simply try to launch your text messages or phone directly from the lock screen, use you back button (it should work for first few times) and then turn off the screen to lock it. Repeat it several times and at one point it will not react on back button pushes. It will respond after 4-5 times.
I know there is very similar thread: http://forum.xda-developers.com/showthread.php?t=1129272
But does anyone of you suffers this issue just after upgrading to 2.3.4 ? Or is this just a coincidence ?
This happened to me with the previous rom. 2.3.4 is excellent
Hi everybody,
I found fix to my problem. It turned out the reason for this was my screen protector. What is interesting it is original screen protector from HTC ! So one time when I couldn't get my lock ring to the middle of the screen I took out the screen protector and voila ... everything is working now like a charm. I suspect that the screen protector got harder or something after little sun exposure. HTC - shame on its poor quality !
But I still do have problems with back button, but only when I run apps directly from the lock screen. Otherwise it works always, so for me it seems like a software bug ! Will write to HTC to report it to them.
This isn't happening with my phone. I have 2.3.4