///
////////
//////////////
Only Turkish
/////////////
////////
///
Rom düzenleme: efsane
Web: http://www.ctrlpda.com/
E-Posta: [email protected]
Rom tarihi: 23 Ekim 2008 Perşembe
Versiyon: CE OS 5.2.18165 (Build 19202Türkçe-efsane)
Radio Versiyon: 0.860
Bu çalışma daha önce İngilizce olarak hazırlamış olduğum MPX200 V2 International ROM esas alınarak hazırlanmıştır.
Romu kurduktan sonra yapmanız gerek ufak bişey var.CHome temasının saatinin font ayarı bozuk.Romu kurun Ayarlar->Bölügesel Ayarlar a tıklayın ve burada bulunduğunuz ülkeyi seçin.Örneğin Türkiye ve çıkış yapın düzelmiş olacaktır.
MPx200 WM6.1 Türkçe UTLRA Versiyon
İçerik:
-Yeni Vista Bekleme İmleci
-CHome wm6.1 orjinal menü
-Internet Gezgini
-Görevler
-Windows Media Player
-Takvim
-İletiler
-Kişiler
-Activesync
-Çağrı geçmişi
-Ayarlar
-Sesli notlar
-Resim ve Videolar
-Saat ve Alarmlar
-Dosya gezgini
-Hızlı arama
-Görev yöneticisi
-Sesli Posta
Aksesuar klasörü:
-Hesap makinası
-Internet paylaşımı
-Modem bağlantısı
-SIM yöneticisi
-Menü ayarları
-(MPx200) Ext. ayarlar
Ofis klasörü:
-Not defteri
-Regedit defteri
-T9 ayarları
////////////////
-T9-İngilizce,Türkçe,Rusça
-WM5 Yeni Menü (2.resimdeki başlat menüsü)
-Yeni zil sesi
-İletilerde gönderdiğiniz mesajın kişiye ulaştığına dair gelen uyarı mesajı aktif edildi.
-Dış LCD ekran resmi aktif
-Üstabar saat eklentisi
-Sistem hızı 138 MHz
-tgetfile.dll dosyası eklendi
-Kapağı açarak cevaplama aktif edildi
Nasıl mı wm6.1 kuracaksınız !
-Cihazınıza en az 64 MB hafıza kartı takın.
-Activesync 4.5 bilgisayarınızda kurulu olmalıdır.
-Motorola Mobile Upgrade Wizard bilgisayarda kurulu olmalıdır.
-Win98 ve daha alt versiyon işletim sistemi kullanıyorsanız paket içerisinde gönderdiğim Smartfon.inf driverini yüklemelisiniz.
-MPx200 ü öncelikle usb kablosu ile sol yön tuşuna basılı tutarak bilgisayarınıza bağlayın.Motorola Mobile Upgrade Wizard programını çalıştırın programın ileri adımlarını takip ederek xxx.img dosyasını bulun ve yükleyin.Bu işlem sisteminizin özellikleriyle doğrudan ilgilidir ve kurulması 5-10 dk sürebilir.Kurulum bitince kabloyu çıkartın MPx200 ün ortada bulunan mavi tuşuna basılı tutarak yandaki power tuşuna basın çıkan ekranda
Enable KITL (no)
Clean Reg Hive (yes)
Format Storage (yes)
yapın ve 3-6 dakika boyunca bekleyin.Sabırlı olun.İlk format işlemi biraz uzun sürer.Sonra gelen ekranda tarih e-mail parola gibi ayarlarınızı yapın.Hepsi bu kadar.
Saygılarımla...
(Tarihte ki ilk MPx200 WM6.1 Türkçe tam sürüm romdur.)
ROM yükleme sihirbazı: https://thelookingglass.sslpowered.com/ROMS/ROMS/Motorola_Mobile_Upgrade_Wizard_1_8_5.rar
Download: http://www.ctrlpda.com/index.php?option=com_fireboard&Itemid=26&func=view&id=1365&catid=193
*****English Explanation*****
Make sure you have connected your device in Flash mode,
and that it has a full Battery, No SIM Card, and No Memory Card in it.
If your device is connected correctly, it should show up in your
Device Manager as Smartphone 2002... Nothing will show on your phone.
To make your device go into flash mode, just hold the left direction, and hit the power button. Your device will flicker for a second, but nothing will show up, it will seem as though it is still turned off, now connect it to the computer, and confirm it is connected.
1. Start Motorola Upgrade Wizard (any version you like) and flash the device with xxx.img
2. Disconnect the phone and remove the battery
3. Put the battery back
4. Perform Master reset (press the power button, it should come up with a screen asking you if you want to Master Reset, select Yes, it will format the device, and then come up)
5. Finally you get a screen giving you your Device ID with some kinda mistake. Once that screen comes up,
remove the battery, and then put it back in.
6. Put your SD Card and SIM card in the phone now, and again connect it in Flash mode to the computer.
7. .......
8. Flash device with xxx.img (fast enough)
9. Now when everything is finished flashing, disconnect your device, pull the battery out, then put your battery back in, and again hold the Center Blue Action Key in for 3 Seconds, and hit the power button.
It will be a new screen with some writing on the top, you the directional pad to select the "Clean Reg Hive" hit the center Blue Action Key to Change from No to a Yes. Now move one down to the "Format Storage" and also hit the action key to change it to a Yes. Now move one more down, to the "Done" and hit the Action key. You device will have a White Screen, and it will stay like this for a few minutes while it preps your device.
If your device does not start up after the White Screen after 10 minutes, then remove the battery, and try step 7, 8 again. If it still does not boot up, then use another SD Card, I have found that 256MB and 1GB cards work very well, but for some reason Kingston cards are not as good.
(CHome clock settings : Press to settings->regional settings->country select ok-> to close )
bu romu samsung sgh-i200 kurabilirmiyim ... acil lazım
craft4141 said:
bu romu samsung sgh-i200 kurabilirmiyim ... acil lazım
Click to expand...
Click to collapse
turkcellin romunda hatalar var.bide rom kurduktan sonra imei nosu felan ne oluyor??
How do i fix my imate jam, it auto reset/ hard reset after i remove battery or replace sim. files and programs i install always be remove.
here my info:
rom version: 1.12.0 WWE
Rom date : 05/28/05
radio version: 1.13.00
Protocol version: 1337.43
ExtRom version: BIG STRORAGE
upragrading to 1.13 rom soon..
please i need help with this
your problems (1 or 2; 2 or 1; 1 and 2):
1. bad backup battery (that be under speaker)
2. bad battery signal button (that is small lever under cap)
твои проблемы (1 или 2; 2 или 1; 1 и 2)
1. backup-батарея исчерпала свой ресурс или отходят контакты (находится под динамиком)
2. сигнализатор одетой крышки вышел из строя (маленький рычажок, находится под крышкой, которая закрывает батарею; на правой стороне корпуса)
Hi plex4pda
I really appreciate the post.
My problem is both 1 and 2.
3. I don't thinks battery, cause when i soft reset (power + reset button) it do hard reset(goes back to begining- reinstall OS)
just finished upgrading, using NL 1.13 rom bs + 1.13 radio from ftp, but with the same prob.
here new info:
rom version: 1.13.0 WWE
Rom date : 05/28/05
radio version: 1.13.00
Protocol version: 1337.43
ExtRom version: BIG STRORAGE
i'm browsing from this device, badly need your help.
PS.
I'm starting to think that its the backup battery cause I always make this device battery empty.
Any remedies to this prob?
Hi everyone,
I do apologise if this has come up before, but I couldn't find anything through searching. Basically I did a factory restore on a Star A3000 to try to cure a problem with the touch screen calibration.
When it restarted I realised that it was not detecting the SIM (which works in another phone). Being new to Android I had assumed that doing a factory restore would be much like on a Windows Mobile phone, but it looks like I have got more than I bargained for!
Can anyone tell me what's gone wrong and how to fix it, please?
Many thanks in advance,
Dave
You will need MauiMeta software and "Flashing cable" to write IMEI back to the phone.
Look for "After a factory reset, both IMEIs are invalid. site:china-iphone.ru" in Google (without quotes, first link, i cannot post direct links, sorry)
This thread definitely contains instructions needed by you, but in Russian -- "Прошивка Star A3000 (Android2.1, GPS,WIFI,TV,FM,MTK 6516,25)" in Google.
Google translate may help you.
If you will need some attached files from that thread, write to me personal message to z8080<d0g>yandex.ru
z8080,
Many thanks for the reply. I will try what you say!
Best wishes,
Dave
Some quotation from my link and translation:
"Народ - у кого слетел ИМЕЙ после хардрезета.
У меня была такая-же трабла.
Попробуйте у себя следующую последовательность
Factory Mod - SIM Detect - SIM1 Detect (у меня написало Test Pass)
тоже самое для SIM2 Detect
затем там-же в Factory Mod зашел в Version
после выхода из Factory Mod и перезагрузки тело спросило какую карту использовать,
выбрал 2-е СИМ и.... вуаля обе карточки заработали и в системной информации появлась инфа об ИМЕЙ! "
Translation:
Hi guys, who have lost IMEI after hard reset (restoring factory settings)!
Try folloving sequence of actions:
1) Enter Factory Mode (Power on phone with one of left side button pressed) -
2) Go to SIM Detect - SIM1 Detect (Test Pass should be displayed)
3) Perform same action for SIM2 Detect
4) Do not power off phone yet, but go to Version menu and then leave thid menu.
5) Exit from Factory Mode by selecting Reboot menu (just disconnecting battery is not preferred).
6) After normal rebooting phone should ask, what SIM do you wish to use. Select both SIMs."
After these actions IMEI may be restored, but I did not tested this personally.
Hi z8080,
Thanks again for your help. I tried this as it looked simpler than a flash cable, but the phone keeps locking up. I don't think it is very happy at the moment! It doesn't want to do the SIM test so I guess I'm back at the start.
Concrete instructions for creating and using flashing cable (in Russian, sorry. Use google translator):
Search for "Итак,вы решили прошить свой H6 android 2.1 на android 2.2 с работающими 2-мя сим картами,
но вы не знаете как точно и в какой последовательности это сделать, тогда эта инструкция для вас." in Google. Or direct link -- forum china-iphone ru/viewtopic.php?f=31&t=10523&start=0 (replace spaces with dots).
On found page (china-iphone forum) you need to perform steps 1. and 3.
Before modifying "regular" USB cable (from phone's kit) to Flashing cable installing MTK-modem-drivers for "regular" USB cable is MANDATORY.
USB-COM converter for cable modifying can be given from USB cable for Simens C60 and many other mobile phones.
Cable pinout for Star A3000:
4 -GND
8 - Tx
10- Rx
Contacts for pins 8 and 10 can be reinstalled by tweezers from unused pin positions
Archive with MAUI META program contains video-instructions. Follow them exactly.
MAUI META program will prompt for 20101224_e1000_klx2(recovery") file. It can be downloaded from www . us . ua / 147373 / (without spaces).
If you, for some reasons, cannot register on "china-iphone" forum and therefore cannot download attachments from there, contact me and I will repost them for you to some file-hostihg service.
P.S. Don't be confused by the fact, that mentioned instructions are for H6 phone. Star A3000 and H6 have _very_ similar hardware and can run firmwares from each other.
P.P.S. If you cannot create flashing cable at the moment, I can send to you full backup of filesystem content of my Star A3000 phone. (~130MB in archive).
There is no guarantee, but restoring my content of /data partition ("Restore to factory settings", as I know, wipes /data partition only. If I am wrong, correct me.) to your phone may (or may not) restore _my_ IMEI to your phone. If it works, it will be great.
Some additional unconfirmed info for "regular" USB cable -- changing IMEI via AT-commands:
Brief translation:
IMEI 1 change
AT+EGMR=1,7,"IMEI"
(in place of IMEI - real imei digits).
Second IMEI change
AT+EGMR=1,10,"IMEI"
(in place of IMEI - real imei digits).
By the way, first command's parameter: 0-read, 1-write.
at+egmr=0,7
+EGMR: "135790246811220" - view first IMEI
at+egmr=0,10
+EGMR: "135790246811220" - view second IMEI
==============
А вот информация к размышлению, сам не пробовал
1. Для смены IMEI 1 и IMEI 2 через программу гипертерминал
Смена IMEI 1
AT+EGMR=1,7,"IMEI"
(вместо IMEI - реальные цифры imei).
Второй IMEI меняется командой
AT+EGMR=1,10,"IMEI"
(вместо IMEI - реальные цифры imei).
Кстати первый параметр команды: 0-чтение, 1-запись.
at+egmr=0,7
+EGMR: "135790246811220" - просмотр первого IMEI
at+egmr=0,10
+EGMR: "135790246811220" - просмотр второго IMEI
2. Попытка смены ИМЕИ через Hyperterminal:
1) подключай аппарат в режиме ком-порт к компу через стд шнурок (тот что с ним в поставке идет),
если используешь виндовс - вызывай hyperterminal - выбирай вирт.порт на котором висит аппарат,
подключившись набирай AT - в ответ должен получить OK в окне гипертерма. - т.е. через компорт подключен, далее
2) набираешь тестовую команду (определяет поддерживается ли смена IMEI)
AT+EGMR=?
если поддерживается (ОК)- вбивай новый
AT+EGMR=1,7,"IMEI"
(вместо IMEI - реальные цифры imei).
p.s. *#06# на клавиатуре аппарата - посмотреть imei.
3. Дополнение к п.2.
а)Если двухсимовик - второй imei меняется командой
AT+EGMR=1,10,"IMEI"
(вместо IMEI - реальные цифры imei).
Кстати первый параметр команды - нолик-чтение, единичка-запись.
at+egmr=0,7
+EGMR: "135790246811220" - просмотр первого IMEI
at+egmr=0,10
+EGMR: "135790246811220" - просмотр второго IMEI
Если они различаются то по *#06# на клавиатуре аппарата отображаются оба, если совпадают - только один.
б) Проверь команду at+elnvrm=?
если ответит +ELNVRM: (1) значит кто-то выдал команду AT+ELNVRM=1
это блокировка записи в NVRAM. Она действует до отключения питания NVRAM и выскивание акумулятора не помогает - говорят на плате есть батареечка.
У меня была такая ситуация, помогли танцы с бубнами, причём теоретически мой результат необъясним.
Имей менялся для неактивной СИМ.
Оключаю СИМ1(режим 2СИМ - только СИМ2), ставлю шину uart на СИМ2(Установки телефона-настройки UART), меняю имей для СИМ1.
Оключаю СИМ2, ставлю шину uart на СИМ1, меняю имей для СИМ2.
Попробуй разные комбинации, можешь вообще выдернуть Симки может что получится.
If MAUI META method fails for some reasons, try this trick:
Восстановил сегодня "трупик" А3000, скончавшегося в декабре прошлого года - проблемы с NAND памятью: перепрошивался легко, но при попытке восстановления IMEI с помощью программы MauiMeta (и других) кроме перевода телефона в режим Meta mode больше ничего! :-(
Попробуй - может и у тебя получится с твоим аппаратом. Вот последовательность моих действий:
1) Flash klx2 version with modified recovery
http://us.ua/158034/
WARNING! Before flashing this firmware these steps are needed:
- unpack archive, containig firmware;
- using program SP_Update_L1048_V3.1.1 ( http://us.ua/158039/ ) load firmware's scatter-file and select correct driver for your phone's camera, OV3640 for 3.2Mpix camera, SID130B for 2 Mpix camera.
You can also try updated version of this program -- SP_Update_L1104_V3_2_4 http://us.ua/173145/
2) install update signed_031311_041020- http://us.ua/180198/ from SD-card
3) check SIM-cards in Factory mode ('Test item' and 'Version') - all, except IMEIs, should be OK
4) Using program MauiMeta 6.1032, restore IMEI in 'IMEI download' mode (you may perform multiple tries for 'Meta mode' entering)
В итоге получил работающий телефон с февральским ядром и обновленным ПО радиомодуля
модель e1000_pxht2 2011/2/25 20:39:27
версия ПО модуля связи MAUI.10A.W10.48.MP.V5.F1, 2011/01/27
версия ядра 2.6.32.9 Fri Feb 25 20:38:25 CST 2011
номер сборки ALPS.10Y.W10.48.MP.V2.03.P9MZECN
Недостатки апдейта:
- надо удалить китайские версии программ
Wow! z8080 you are a STAR!!
Thanks so much. I really appreciate your help. Something here must work
Important note for AT-commands method:
Virtual COM-port for these commands appears only for few seconds after connection battery to the phone.
same problem with a3000 and a5000. is there an adb command that can write imei?
I was surprised that moderator Mr.Madnish suddenly closed a thread on China iPhone Clon H2000 calling it IMEI spoofing while there was never an exchange of any IMEI numbers between any of the contributors but the thread to which I am posting is still alive. Wonder what made him close it? All the contributors to that forum faced identical problem faced by those in this thread. Well...only Mr.Madnish knows perhaps!!!
ok got the point
H2000 successful restore!!
A huge thanks to vramool !!
I was on the right track but did not get it to work.
Finally after reading some more on the different forums, I found a suggestion that got me very close to success.
Since vramool has a cable that combines COM and USB in one cable, it made good sense to set the USB ports for both cables for me to the same port.
That made is easy to switch from flash cable to normal USB cable for the download part. Now I also understand the "Flash + USB" setting in the multiportflashtool...
I also found that the backup files that I made with ADB do not work for flashing the phone. For this purpose I used the files that I downloaded from Zzappo some time ago.
Thanks to all for the suggestions and the help. My phone is alive and kicking and IMEI's are also back
Big thinks to all....
kayyappan said:
I was surprised that moderator Mr.Madnish suddenly closed a thread on China iPhone Clon H2000 calling it IMEI spoofing while there was never an exchange of any IMEI numbers between any of the contributors but the thread to which I am posting is still alive. Wonder what made him close it? All the contributors to that forum faced identical problem faced by those in this thread. Well...only Mr.Madnish knows perhaps!!!
Click to expand...
Click to collapse
Well discussion on CLONE PHONES/IMEI ( even if you don't disclose it ! ) IS NOT ALLOWED on XDA.
If you had an issue, there is a PM button for you to hit and contact me rather than post in a section.
If you make another section about clone phones or IMEI discussions it shall be removed/shut again and you could earn yourself a vacation from XDA.
Next time, use the PM button - shall be a better medium to communicate.
Thanks and regards.
Thread closed and posts removed as too much discussion about changing IMEI numbers which is against the rules. Do not post such content on other threads/section - as it is against the rules.
hi can someone help me with this problem my phone is getting full i got 128GB sd card on my zenfone 4 max but i cant tranfer apps to it or simply i cant find a way to. can anyone tell me how to?
kyletan24 said:
hi can someone help me with this problem my phone is getting full i got 128GB sd card on my zenfone 4 max but i cant tranfer apps to it or simply i cant find a way to. can anyone tell me how to?
Click to expand...
Click to collapse
just root your device than use Link2SD will be help..
kyletan24 said:
hi can someone help me with this problem my phone is getting full i got 128GB sd card on my zenfone 4 max but i cant tranfer apps to it or simply i cant find a way to. can anyone tell me how to?
Click to expand...
Click to collapse
1.Скачать и установить драйвера ASUS_Android_USB_drivers_for_Windows.rar ( 8,78 МБ )
2.Скачать ADB adb.zip ( 1,04 МБ )
3.Распаковываем архив ADB Например: c:\adb\
4.Настраиваем телефон.
Для этого в телефон->настройки->для разработчиков- помечаем Отладка по USB.
При подключении USB-кабеля выбираем Только зарядка.
Проверяем соединение на компьютере.
5.Создаем в распакованной папке adb файл devices.cmd (проверяем что .cmd это расширение файла а не его имя) и пишем туда:
adb shell
sm list-disks
pause
6.Запускаем созданный файл
7.В запустившейся командной строке пишем
sm list-disks нажимаем Enter
Появится disk:NNN,NN
8.Пишем sm partition disk:NNN,NN private где NNN,NN цифры из предыдущей команды после двоеточия, Enter
Всё готово,отключаем телефон от компьютера,проверяем на телефоне во вкладке хранилище,пользуемся
kyletan24 said:
hi can someone help me with this problem my phone is getting full i got 128GB sd card on my zenfone 4 max but i cant tranfer apps to it or simply i cant find a way to. can anyone tell me how to?
Click to expand...
Click to collapse
Once your phone is rooted, the app "Root Essentials" has a tool to turn an sd card into "adoptable storeage" i.e. format the card to make it part of system storage.