It is really freaking slow AND is never recognized by my 8125. I cant partition it either through windows or wm5storage. It transfers at about 30k/sec.... rediculously slowl. Im running XDA Mobile 6 Release 5 FINAL full!. Is there any patch or update or trick I can pull to get my 8125 to recognize my 4gb kingston minisd? Or atleast increse its speed?
Thanks,
Rico
iamrico00 said:
It is really freaking slow AND is never recognized by my 8125. I cant partition it either through windows or wm5storage. It transfers at about 30k/sec.... rediculously slowl. Im running XDA Mobile 6 Release 5 FINAL full!. Is there any patch or update or trick I can pull to get my 8125 to recognize my 4gb kingston minisd? Or atleast increse its speed?
Thanks,
Rico
Click to expand...
Click to collapse
I am sorry but Wizard is not suporting 4GB miniSD card very well. Some people reported, that some cards are working, but almost all are not working specialy because new cards are SDHC which need more specific hardware. So if it is your case and your card is SDHC there is no chance to get it work. If not make sure your card is formated to FAT16, try it in some memory card reader, if it works. And at the end this is not a good thread for memory cards. And 4GB miniSD cards have been already discused in Wizard accessories or Wizard upgrading thread, so search there your answers...
Try this?
http://forum.xda-developers.com/showthread.php?t=293556
I was just about to, but I got side-tracked, and now it's unreasonably late. I'll try it tomorrow if you will....
Scuse me lady...
Are you xtremely sure that this works...? it works for you?
Does you know that if you instal a hardware patch it never recognize the SD slot none SD card till you upgrade again or hardreset and it will cost many info?
so...
A men On hermes thread told me the newer versions of porting ROMS Builds has an entrie that allow read SDHC I think since 20273 but....
Does your wizard has it? seee on my Shipped ROM from Hermes WM6.0 already comes with this Reg entrie and so...
Is not the Software... cause if it would... the old .1933 that builds the rom I have it never comes ok? so...
You can see if the wizard has it and try this... I cant recomend it but make a high research and try it before post try this
its not recomended to do that...
first make it on your then recomend...
This is the REG
HKLM/drivers/sdcard/clientdrivers/class/SDmemoryclass
"inside... High_Capacity and many inside too...
Block transfer
dll
iclass
prefix
profile
So...
if wanna try it...
search for it on hermes threads.
So I tried it today (Sat, 11/8)
It didn't work, and nothing blew up, either. I guess I appreciate the recommendation, though.
Yes, I know there's a lot out there to try to solve this, but this looked easy, and I thought I'd offer it since you seemed to be looking for things to try.
I think I was very clear about not having tried it yet, so why did you ask me if I was sure it worked?
I back up everything daily, so it's pretty easy for me to reflash, or hard reset. No "data cost" ever. I'd recommend it. I guess being prepared makes me look pretty reckless when it comes to trying new things.
The fix also includes dlls, I didn't bother analyzing it, checking to see what the reg entry was in the fix, checking my own registry, or reading any Hemes threads. I don't have time. Again, if it blows up, I can handle it. If I weren't fully backed up I'd spend more time doing research on the dozens of fixes I try than I do backing up and recovering (I haven't had to for over a year, now). I don't generally care about the code details and what happens on other gadgets I will never own.
Good luck with this.
P.S. Please check my signature.
i am using amp v3 rom wm6.1
ust want to know how much capacity does wizard can supoort.
i have 1gb working well,can i upgrade to 2/3 gb & works well...
have you tried the SanDisk microSD with adapter?
I have it working on mine. faster than the old 1gb Kingston I used to have. It maybe the problem with the card it self.
try a different brand, or try the "ultra" series as well. they may have a better transfer rate as they were made for video games.
there is also an issue with formating the card:
if you decide to format using xp to fat32 it will run slower. unfortunately, the only way to recover it propperly was to put it into my camera and have it format back to fat16. xp would not do it.
again, i think your problem is kingston. they are good for ram on PC/MAC; but i do not think they have gotten the sd memory dow yet. next time get the origional "SD/SanDisk II"
good luck.
The speed is fine after I formated back to fat 16, thanks to my handy camera. But I cant seem to partition the damn thing into two 2gb cards... any thoughts? Ive done the wm5storage, card reader, xp/vista, partition magic, fdisk thing and none have worked thus far. Thoughts?
Rico
krishan2207 said:
Hi
Its a registry hack just go to hklm/drivers/sdcard/clientdrivers/class/sdmemory_class and here modify the value of "Blocktransfersize" from 128 to 64 it fix the media player sound cracking but also slightly decrease the data writing speed on ur card. this will not harm ur card and ur card will work perfectly with ur card reader and if u dont use the card reader than when u want to transfer large amount of data(above 256 mb) u can increase this value upto 512.
Click to expand...
Click to collapse
to help with transfer rate... maybe that can be a solution??
just backup the reg key's nessesary.
as far as partitioning the mbr on a flash card...
I have no idea.
BUT
search for NUE TOOLS (could be "neu tools" ..
this dude has been doing some sick stuff. Some of his software may be able to help.
Related
Anyone have Micro SD issue?
I have a ScanDisk 2GB and the Flame always can't read it.
Every reset or the device trun off the card will lost,have to pull it out and put it back to make it read.
Anyone know how to unhide the Extended Rom?
p.loong said:
Anyone have Micro SD issue?
I have a ScanDisk 2GB and the Flame always can't read it.
Every reset or the device trun off the card will lost,have to pull it out and put it back to make it read.
Click to expand...
Click to collapse
The same for me! But my Flame sometime can read it!
Have done reformat the card still the same anyone have solution
I use SANDISK 2G too
But I do not have this question
Very glad to discuss about FLAME
Advise you to do the form FAT16 format to the memory card
mine also has the same problem, tried to format with FAT also FAT 32 but no luck.
hopefully the WM6 rom will come out soon to fix this issue
klikman said:
hopefully the WM6 rom will come out soon to fix this issue
Click to expand...
Click to collapse
Are you sure? WM6 for O2 Xda Flame?
I noticed this issue for quite long time and did some research works on it, currently the best solution is to use those TF cards made in Japan instead of those made in Taiwan. guess should be due to the control chip differences of the cards.
I am using a 2gb Kingston microSD and works well.
My big question is will it support the micro SDHC format for future cards that exceed 2gb?
Same issue with a Sandisk 2 gb. Tried to format in fat16. Not better.
But sometimes, after a softreset or a wakeup the card is available without the need to reinsert it.
I have send an email to the support. They answer 2 gb is not supported. But on the Flame website, it is written that 2 gb is supported.
Patriot 2 GB works fine for me.
Kingston is another brand I recommend, seconded by andyh's comment.
I used to have a similar problem but since i replaced with the new one, problem solved
I have go to the shop and change my micro sd from scandisk to transcend the problem sloved.
p.loong said:
Anyone have Micro SD issue?
I have a ScanDisk 2GB and the Flame always can't read it.
Every reset or the device trun off the card will lost,have to pull it out and put it back to make it read.
Anyone know how to unhide the Extended Rom?
Click to expand...
Click to collapse
The same problem.
With Kingston no problem.
rajekm said:
The same problem.
Click to expand...
Click to collapse
Copy all your Card stuff to your PC and do a format then try again if still don't work then you have to change your card
microsd cant be read by sony vaio
Transcend microsd works fine on xda flame but when i try to read it on my sony laptop, it cant be read. although it is possible in my toshiba laptop. what gives.
why there iz no reviews of flame in the internet!!
Hi I've searched the forum about this but cant really find any definitive answers.
Is it possible to run a 32GB SDHC card on the Uni or not?
Has anybody done this and currently using it and if so is there any drawbacks or restrictions etc?
What driver/Software is needed for it to be recognised is it the normal SDHC prog that comes with some cooked 6.1 roms or is it another?
This is the same card as the one i have ordered is it compatible?
Thnx for any help/Advice you can give
I have heard of 32GB cards running on a Uni. (I've only got 8GB, though)... but now you've ordered it, you'll be able to enlighten us whether it works I'm sure many people would be interested, and this is what xda-devs is all about, all chipping in a bit of info
Will be happy to post results, was just hoping somebody had already tested and had some info already, Searched forums but seems nobody has actually tried it out yet.
Will try it first oob then try the sdhc driver and see what happens.
I can confirm that you can use 32GB SD Card with Uni. I am using one from Silicon Power and you need to select appropriate Card type using 'SD Settings' program after inserting it. The program will ask you to reboot the device and once done, its business as usual.
Almost all 6.1 Roms recognised and I have not experienced any issues in using 16GB Card.
Hope this helps.
This is very usefull info!
Thanks,
Perfect
it would be an excelente notice, I already own one 16 gb running wm 6.1, and let me tell you that i have not room on it.
Pls let us know your comments
Saludos
rbalu72 said:
I can confirm that you can use 32GB SD Card with Uni. I am using one from Silicon Power and you need to select appropriate Card type using 'SD Settings' program after inserting it. The program will ask you to reboot the device and once done, its business as usual.
Almost all 6.1 Roms recognised and I have not experienced any issues in using 16GB Card.
Hope this helps.
Click to expand...
Click to collapse
Are you talking about a 16GB card or a 32Gb card, ??
I received my16Gb card today and spent some time getting stuff on it - movies, music, setup .CABs etc, seems to be performing fine, the only difficulty I experienced is the card not being recognised by my computer in USB mode, not sure why, had no problems accessing it through AS. Therefore it is taking me longer to transfer large files or folders over. Othere than that there seems to be no problems performance-wise. Would be interesting to know how the 32Gb performs.
Waiting for the result .... hope it works great..... please let us know.....
The card has now arrived and it was recognised straight away on setting 2 with the SD-Settings app. Im gunna transfer everything across and install some apps and test everything out etc and post back soon
Can anybody recommend any tests i can do to make sure everything is working normally etc, Im gunna do the benchmark test with pocket mechanic but is there any other progs that can test it?
SPB Benchmark http://www.spbsoftwarehouse.com/products/benchmark/
VSBenchmark http://vsbenchmark.en.softonic.com/windowsmobile
ATHiEST said:
The card has now arrived and it was recognised straight away on setting 2 with the SD-Settings app. Im gunna transfer everything across and install some apps and test everything out etc and post back soon
Can anybody recommend any tests i can do to make sure everything is working normally etc, Im gunna do the benchmark test with pocket mechanic but is there any other progs that can test it?
Click to expand...
Click to collapse
Try SD Setting type-1.
It is faster than type-2.
Sorry for confusion, I do have it on type-1.
What i meant is that i have it on the second setting which is type-1, type-2 been third setting.
Havent got round to trying any software out on card yet as I'm trying to get my PC to recognise the card it just seems to not accept SDHC cards or 32gb ones anyway.
Ive copied all my data installers/docs etc from old card to PC and im trying to transfer using the "Disk Drive" setting in "USB to PC" but sometimes the uni reboots , will get there eventually.
Do you know of a fix for Vista/Win7 to be able to read 32GB SDHC cards?
ATHiEST said:
The card has now arrived and it was recognised straight away on setting 2 with the SD-Settings app. Im gunna transfer everything across and install some apps and test everything out etc and post back soon
Can anybody recommend any tests i can do to make sure everything is working normally etc, Im gunna do the benchmark test with pocket mechanic but is there any other progs that can test it?
Click to expand...
Click to collapse
Thanx a lot for the confirmation i'm on my way to get one for myself.....
rajivshahi said:
Thanx a lot for the confirmation i'm on my way to get one for myself.....
Click to expand...
Click to collapse
Be careful if you get one from Hong Kong via ebay as mine had a autorun.inf on the card infected with a worm, My AV (ESET NOD32) got rid though.
Im also having alot of problems transferring data to the card, I get so much on then something will go wrong like the phone will reboot or lose connection and then the card inst accessible it just says it needs formatting.
I cant get XP or Win7 to see the card when its in my inbuilt reader, Ive order a cheap card reader that accepts various cards including 32Gb sdhc so hopefully i can get all my data on and properly test it out.
XP and High capacity SD cards
I have a 16G card, have no problems on the Uni it works great but I did have problems on XP on the inbuilt SD reader on my laptop. The following microsoft patch fixed the XP issues.
http://support.microsoft.com/kb/934428
Tried that but that hotfix is already installed into SP3, so fook knows whats up. Should have my reader by monday anyway.
ATHiEST said:
Be careful if you get one from Hong Kong via ebay as mine had a autorun.inf on the card infected with a worm, My AV (ESET NOD32) got rid though.
I cant get XP or Win7 to see the card when its in my inbuilt reader, Ive order a cheap card reader that accepts various cards including 32Gb sdhc so hopefully i can get all my data on and properly test it out.
Click to expand...
Click to collapse
Thanx for the comment i'll better wait till your next comment on the card reader comes......
rajivshahi said:
Thanx for the comment i'll better wait till your next comment on the card reader comes......
Click to expand...
Click to collapse
Had major probs with the card, data just kept getting corrupted/lost etc and its basically ****ed. Also the seller has dissapeared his account has been suspended also. Ive put a paypal claim in and they have agreed to do refund.
Ordered another from another seller, this guy has a decent rating the cars seems alot higher quality aswell.
will post back when i have news and test results.
ATHiEST said:
Had major probs with the card, data just kept getting corrupted/lost etc and its basically ****ed. Also the seller has dissapeared his account has been suspended also. Ive put a paypal claim in and they have agreed to do refund.
Ordered another from another seller, this guy has a decent rating the cars seems alot higher quality aswell.
will post back when i have news and test results.
Click to expand...
Click to collapse
I was having exactly the same problem last year with a 4gb card. Whatever I copied he was simply digesting without any notice.
Ok im about to blow my lid.. this is the second time im experiencing this problem.
Out of no where my sdcard removes itself. Its actually happen to where my G1 freezes, I actually try to reboot and it goes back into sign in!! Wtf!! my contacts are all gone my Gtalk has to sign back in.. THIS SUCKS. I'm currently on Dude 1.3 Rc2.. I'm an loyal dude rom fan and this has never happen to me.
Its happened twice so far and since the last time it happened ive changed my sd's im using a 4gb class2. Dont tell its the class2 cause Ive been using the same class2 since ive had app 2 sd and never experienced this..
Has this ever happen to anyone or is it a known issue if someone, anyone shed some light on my problem i would greatly appreciate it!!
THanks a million!!
Do your apps remove themselves as well when you have to sign back in? Like a normal wipe? Have you tried this with more than one SD card? How long have you had the phone?
Sounds like it could be hardware related...but trying wiping and reinstalling. Also, try not using APPS2SD and see what happens...because obviously, when your SD card stops working on Apps2SD, the background processes being run off the card are going to crash and lock up the phone, and you're needing to sign in because that data was stored on the card as well.
My friend had a defunct phone where not only could the SD card wiggle a little inside its slot, but the entire slot itself came off the board/wiring it was sodered onto, so if you've dropped your phone on that edge, that could be your problem. Every once in a while, it'll connect, but it can still unconnect at any time, like what you're experiencing.
Ext2 format itself!!
I actually noticed that my sd card is formating itself to Ext2(all 4 gbs) everytime this happens!! and its hell to format it back to fat32 this is got me going NUCKIN FUTS!! Ive never dropped my phone the sd card slot is intact and ive had the phone for quiet a while..
Also i use paragon to partition..
is it a 4 gb micro sdcard?
Edit. never mind didn't fully read it. the size of your sd card is your problem. I had a 4 gb and it pissed me off soooo bad. I don't know what it is about then but the phone doesn't like them. sorry.
yes, class 2
big nu said:
yes, class 2
Click to expand...
Click to collapse
yeah buddy you're out of luck. buy a different size sd card and you will be good to go. I almost was going to try sending my phone back to t-mobile but then I figured since it started when I changed to that size sd card and I heard that they were having so much trouble with them with this phone that I would try a different sd card first. Switched to a 8gb class 6 sd card that I bought at target and things couldn't be working better.
hope this helps.
@ jc1337
Thanks bro..
big nu said:
@ jc1337
Thanks bro..
Click to expand...
Click to collapse
No problem. Glad that I could help.
Sorry about the fact that you have to buy a new sd card though. Trust me I know that it sucks.
The different size answer is BS I have a 16 gig and it does it to me to.
imbonez9 said:
The different size answer is BS I have a 16 gig and it does it to me to.
Click to expand...
Click to collapse
I believe it happen to me on a 8gb class2 so you could have a point, we need a solution or aleast know whats causing the problem so we wont do it again.. now ill mention that i ran the JF1.5 ADP and it didn't happen at all i think its the new app2sd set-up that dude is using.. its gotta be because it never happen on any of his other builds>>
@ imbonez
did it automatically formatt your whole card to EXT2?
imbonez9 said:
The different size answer is BS I have a 16 gig and it does it to me to.
Click to expand...
Click to collapse
you don't have to be a **** about it. I am just trying to help. there is no need to say that what I said is "BS" I know that 4 gb sd cards have been known to have problems with these phones. I am not trying to say that is for sure his problem. I am just giving a suggestion that was given to me and it worked and his issues seem similar to mine.
jc1337 said:
you don't have to be a **** about it. I am just trying to help. there is no need to say that what I said is "BS" I know that 4 gb sd cards have been known to have problems with these phones. I am not trying to say that is for sure his problem. I am just giving a suggestion that was given to me and it worked and his issues seem similar to mine.
Click to expand...
Click to collapse
imbonez AND jc1337
Please lets not turn this into a word war im trying to figure this out in this thread....jc1337 i value your suggestion and i will try anything.
imbonez, thanks for your input and thats the purpose of this thread for different input, i just don't wanna get off subject and have this thread removed!!
big nu said:
imbonez AND jc1337
Please lets not turn this into a word war im trying to figure this out in this thread....jc1337 i value your suggestion and i will try anything.
imbonez, thanks for your input and thats the purpose of this thread for different input, i just don't wanna get off subject and have this thread removed!!
Click to expand...
Click to collapse
sorry, I just found that rude. oh well. but if he is having a problem may not just be the sd card size, the problem may lay within the ROM as you said before. I would try talking to dude and see if it is something on his end. If it is I am sure he would be glad to know about it and fix it.
i had this problem with the 1gb microsd that came with my g1! i had a 16g sandisk class2, and it got fried, so i had to use the original 1g as a temporary...it did that all the time, i was using it for a week or two and at least once a day itd do that sh*t. I never figured it out, i just bought a Transcend 16g class 6...works great. Wish i knew the answer for you guys, though, sorry...Hope you get it figured out...
-BMFC
I don't have an answer, but I hope this can add more info to your puzzle.
Same happens to mine every now and then. No reformat though, just pops up an error saying that the sd card has been removed. Then my custom ringtone (which resides on the sd card) stops being used and it reverts the default.
Am running on JFv1.51 ADP and have the stock standard 1gb sd card that came with the adp.
I don't have apps installed on the card, just the cache.
big nu, I know that you say it doesn't matter if it is a class 2 or not but I would just try a class 6 sd card.
jc1337 said:
sorry, I just found that rude. oh well. but if he is having a problem may not just be the sd card size, the problem may lay within the ROM as you said before. I would try talking to dude and see if it is something on his end. If it is I am sure he would be glad to know about it and fix it.
Click to expand...
Click to collapse
I'm sorry I never ment any disrespect in any way when i said its BS my bad.
This actually used to happen to me even before the cupcake update. I used to used a 4gb class 6 card which eventually got fried..so I'm waiting for a new 1 to come in
I know this will seem really strange, but I noticed a trend throughout all the posts....seems like the G1 doesn't like lower numbers Go with a 16 GB, class 6 card and call it good I never had a problem whatsoever with mine, even though I am currently using an 8GB, and Dude's 1.2b. Once I pick up my 16 gig, I will let (you) know how it runs.
i keep having the same problem and i am running jf 1.51 us no themes or anything
Hi,
I'm new to this forum as well as to the HTC Raphael. I've got a RAPH100 and did the latest offical ROM Upgrade (ROM: 5.05.407.1 GER, Radio: 1.11.25.01DE, 52.58.25.30U) and now it's not recognizing my microSD card anymore. Before, I had to reinsert the card 2-5 times, but often it didn't work anyway.
My storage card is a:
Transcend microSDHC Class 6 8GB
MMAGR08GUDCA-DB
I F0240000 914
52511 2452
I already searched for a sort of patch, but typically it has to work out-of-the-box i guess.
EDIT: even freshly formatted it doesn't work
the-razer said:
EDIT: even freshly formatted it doesn't work
Click to expand...
Click to collapse
Bastard!! that was my first fix!!!
ok, more useful help:
1) its possible you're SD card has a defect your PC (through its card reader) doenst mind, but your phone does. If possible (ie you have more of these cards, or friends with the same phone) try your card in other (same & different) phones / other (same) cards in yours
1 i) It's possible your phone OR card has a minor pin problem - have a look & see if there is anything obvisously wrong with the card contacts / phone pins (you might need a torch)
1 ii) try a different micro SD card (any type or size) - if it reads 100% fine, then it is unlikely to be a pin problem on the phone (unlikely - not impossible)
[when i say pin here, i mean micro SD card pins / pickups / contacts, not any kind of password]
2) How about flashing back to the old rom (if its available)? - then testing again
3) How about flashing a custom rom? (this is a little involved - its not difficult, but will require some time to ready & understand before you start)
Beeble said:
1) its possible you're SD card has a defect your PC (through its card reader) doenst mind, but your phone does. If possible (ie you have more of these cards, or friends with the same phone) try your card in other (same & different) phones / other (same) cards in yours
Click to expand...
Click to collapse
As card reader i use a simple microSD USb reader not bigger than the card itself+usb connector.
1 i) It's possible your phone OR card has a minor pin problem - have a look & see if there is anything obvisously wrong with the card contacts / phone pins (you might need a torch)
1 ii) try a different micro SD card (any type or size) - if it reads 100% fine, then it is unlikely to be a pin problem on the phone (unlikely - not impossible)
Click to expand...
Click to collapse
tried a 128mb & 2GB card, works fine.
2) How about flashing back to the old rom (if its available)? - then testing again
Click to expand...
Click to collapse
didn't work well at all. this was the reason why I upgraded. I flashed the rom in the hope of solving this problem.
3) How about flashing a custom rom? (this is a little involved - its not difficult, but will require some time to ready & understand before you start)
Click to expand...
Click to collapse
well, assuming there's no other solution I would try it. I've already read a bit about custom roms, but atm I don't want to do HardSPL.
Hi The-Razor,
Guess what! I have the exact same card (not the numbers ofc.. , and the exact same problems!
A128 mb card does work. And the 8 gb card does work in other phones.
The weired thing is. In my Touch Pro info says that the cardslot is in use. But when you look in the memory settings it says, not installed...
Or do you have an solution already? I hope so...
grz
Vinoloco
This is a known issue with this brand of card.
San Disk or Kingstons work.
vinoloco said:
Hi The-Razor,
Guess what! I have the exact same card (not the numbers ofc.. , and the exact same problems!
A128 mb card does work. And the 8 gb card does work in other phones.
The weired thing is. In my Touch Pro info says that the cardslot is in use. But when you look in the memory settings it says, not installed...
Or do you have an solution already? I hope so...
grz
Vinoloco
Click to expand...
Click to collapse
I'm sorry, haven't found a solution yet. I'm thinking of flashing the newest Energy Rom, because there are several users reporting that this could fix the compatibility issue. But I haven't already had the time to do so.
@Bruce:
After searching a second a time I found some threads about exactly that problem. I haven't found them the first time because I just searching in Raphael, not accessoiries ;-)
Well, I flashed the recent Energy ROM, which seemed to help at first but now my phone doesn't see the microSD anymore. But I put a ROM Image to the root of my storage card and booted into bootmanager et voila: it asks for update, so its not a hardware issue i suppose.
the-razer said:
Well, I flashed the recent Energy ROM, which seemed to help at first but now my phone doesn't see the microSD anymore. But I put a ROM Image to the root of my storage card and booted into bootmanager et voila: it asks for update, so its not a hardware issue i suppose.
Click to expand...
Click to collapse
No, if the hardware can read the ROM image on the card then i dont think its a hardware problem. (Still can but not likely) So it seems to be a problem with Windows mobile or with (all!) the roms we are using.
Considering that this problem (now and then) excist in all ROMS i cant imagen that it are the ROMs that causing the problems. For sure when there are so many ROMs, aka: Now it seems that there is no ROM developper that can solve this problem. I cant imagen that. Those guys are smart enough to figure this out.
Considering that: Other cards do work WITH windows mobile AND with all roms we are using you might think that its the brand thats causing the problem... But i read more forums and it seems that more cards and brands can have this problem. But not all the time... Trancends is leading for shure but not the only one (adata)...
Considering that: My "defect card" does work in a card reader you would still think that it is the hardware... But why does the hardware read other cards then? So it really cant be the hardware...
Considering that its Windows Mobile then? That might be... But then again alot of cards do work in WM.... So that cant be the problem either...
Considering that all the cards must be produced conform protocol or standard xxx all the cards must work "the same" or at least be compatible with devices... But we know for shure that this isnt the case...
So:
Most cards work, so hardware cant be the problem, windows mobile / ROMS can read most cards. So that cant be the problem either. The problem excist in alot of Brands. A few got way more problems than other brands.
So might it be the production process of the cards? Are the cards being dubble checked when they are made or when the are ready? Is it the brand that sells all cards including the defect cards. And do some brands check there cards better then others... Might there be so little manufactoring problems they over see them. I guess more research would really help here...
Those cards came way to fast on the marked for budge prices... And it seems that we are paying the price for it now....
vinoloco said:
Considering that: Other cards do work WITH windows mobile AND with all roms we are using you might think that its the brand thats causing the problem... But i read more forums and it seems that more cards and brands can have this problem. But not all the time... Trancends is leading for shure but not the only one (adata)...
Click to expand...
Click to collapse
I have only seen this issue with the transcends or the aData cards which are the bottom of the line cards. I would suspect that the data transmit rate and consistency is what causes the issue. Even if you get the device to recognize it, you can't stream media from it without freezes, etc.
I have the same problem but with a 4 GB - Class 4 - microSDHC kingston.
Wmobile since I can not format it is as if protected. takes some files to read the card, including executables, coming to hang the device.
salu2
I had the same issue with the same card (Transcend C6 8GB). I was unable to fix the issue. Good luck!
I noticed:
My bosses Fuze wouldn't see it (stock rom)
My friends VZ Touch Pro would see it (stock rom)
My old 8525 would see it (cooked rom)
And a bunch of people at my work with the Titan, could see the card.
I just traded with a friend who had a Transcend C4 8GB card.
Here's my previous post:
http://forum.xda-developers.com/showthread.php?t=525445
I changed it for an kingston 8 gb. That worked on the fly...
I now changed to a SanDisk 8GB ... working like a charm
My AT&T FUZE with the Energy ROM would only sometimes read my Adata 8Gb Class 6 Micro SDHC. I swithced it with an older Kingston 6Gb Class 4 Micro SDHC I had on my camera and haven't had anymore problems. Read about several people on different websites with the same problem. I could not find a fix either. The Raphaels just don't like those cheap micro sd cards.
Good Day! Friends please help for my trouble with this (MMAGR08GUDCA-DB) microSDHC card... All it's ok work, but today, flash card say to me: format not possible sd is write-protect! Oo but i'm not added write-protect nd no added some code for this card...
Please say to me, how i can formated this card?????????????????
I very very need your help, 2 days internet serfing not much normal result (( and i can't find any firmware tools to format this flash card (((((((((((
Formatting can be done using an micro sd-adapter (i dont know if you can set writeprotect then...). Then you can format the card in a normal pc. But if that doenst work also, then i would think it over to send the card back for an other brand. I formatted my old card on a normal pc to. That went fine... but then stil the rapheal dit not reconised the card....
So it really might be the brand... beside that, i dont know if a class 6 card works well...
Well I Clear SD MBR on my card in magldr113 after that my sd card is invisible on my PC or phone. Please help?!
So you could see it ok before?
Is it an SDHC (assume it is), does the reader you have it in, on the PC read SDHC, or SD only?
Is it the right format for the phone to read?
Yeap i see it ok before on my PC. I installed WP7 on my htc hd2 but he don't see it than i clear mbr
my card is Kingston 8gb SDHC. My reader don't see anything, i tried read card on another pc but the same. (sorry for my English)
Drexill said:
Is it the right format for the phone to read?
Click to expand...
Click to collapse
No, my hd2 don't read this card after clear. Please help it's a new one.
Ok, this isn't uncommon and i have had this problem too.
Unfortunately, sometimes your card can be corrupted by the process of wiping the partition via magldr, it is rare but can happen.
However and more commonly, your card can be rescued by inserting it into a nokia N97 (or similar) Nokia device. You then simply ignore the password prompt, go into setting and format the card. You will then find your computer can recognise the card. It is the way early wp7 roms wrote the card that effectively locked them, you should not get this problem with later roms.
Sometimes you can be lucky and use Ubunto to wipe the card, but in my experience, use a Nokia (about the only good use for them!!!!). You can also use the app in windows mobile 6.5 if you know anyone who is still using wm6.5 lol
Cheers and hoped this helped.
Can you tell me witch WP7 ROM is the best for HTC HD2 and read my kingston 8gb class 4 ?
I got exactly the same. Is there no other way to fix it? I mean something what can be done on PC/MAC using card reader or by CWM?
I don't know about your SD card as I use a transcend 8gb C6, but I use yuki/xbox rom
As for getting both your SD cards working again, they are encrypted so you either have to use wm 6.5 and use format utility there or get your hands on a N97 or similar. No current utility for a pc or mac works as far as I know (bummer I know)
Sent from my hd2 with stock Mango & XDA Windows Phone 7 App, because im worth it.
That's weird coincidence but my mother got N97, but when I put card into the phone it starts to behave really slow. Can you describe what to do step-by-step please?
mpq1671 said:
That's weird coincidence but my mother got N97, but when I put card into the phone it starts to behave really slow. Can you describe what to do step-by-step please?
Click to expand...
Click to collapse
Pop ur card in, goto settings and format card . It will ask you for encryption key, just ignore it
Sent from my hd2 with stock Mango & XDA Windows Phone 7 App, because im worth it.
But where are those settings?;> I have to do it by file manager or what?;> Sry, nokia interface blows my mind up when I have to do anything, it's messed up.
Try this..
applications--->file manager--->select what you want to format (mass/memory card)
--->options---->reformat
I've tried but it detects no card, weird thing. Any ideas? Probably card is totally broken.
mpq1671 said:
I've tried but it detects no card, weird thing. Any ideas? Probably card is totally broken.
Click to expand...
Click to collapse
If the nokia doesnt detect the card then im afraid its fried. It does happen, flash does not not an unlimited life span, even new ones.
Time to buy another im afraid, I can recommend transcend 8gb class 6, works fine with droid and wp7
So it somehow broke (during some actions in recovery). Thanks for your help anyway, it may be useful in future x]
LazyBoy3 said:
... than i clear mbr ...
Click to expand...
Click to collapse
The card has no filesystem/partition and thus your computer or android won't recognize it.
Reformat it.