Hey well when i got this phone from HTC, it came with the at&t bloatware on it. I originaly flashed the htc firmware without a radio. Worked fine other then they keyboard drivers were weird since AT&T thought it would be a great idea to change up the keyboard.
So (Unless someone did this already and i didnt see it in the wiki) im cooking up the HTC Firmware with AT&T radio and drivers. anyone know where the keyboard drivers are? i have both ROMs extracted ready to go.
There are no keyboard drivers. It's just a change in the Registry
It's the same change as for the kaiser -> Tilt.
I've attached the cab and it should get the job done. I forgot the registry edit though, you can find it in the very long at&t fuze thread in Raphael general.
Kraize92 said:
There are no keyboard drivers. It's just a change in the Registry
It's the same change as for the kaiser -> Tilt.
I've attached the cab and it should get the job done. I forgot the registry edit though, you can find it in the very long at&t fuze thread in Raphael general.
Click to expand...
Click to collapse
so you need the cab along with the registry change?
does it change all the links on the keyboard or just where the numbers and symbols are?
lbhocky19 said:
so you need the cab along with the registry change?
does it change all the links on the keyboard or just where the numbers and symbols are?
Click to expand...
Click to collapse
No. It's an either/or thing. Either you get the cab and install it, or you change it in the registery.
It changes everything from keyboard to numbers and symbols to where the special keys (sms, email, etc.) are.
Hey Kraize thanks for this, will have to check the wiki later to see if there is mention of this as it will be a common question in the next week or so.
y2whisper said:
Hey Kraize thanks for this, will have to check the wiki later to see if there is mention of this as it will be a common question in the next week or so.
Click to expand...
Click to collapse
Don't thank me. Thank TarusBulba. It's his cab, I just renamed it and re-upped it.
cool thanks. New problem though:
I have the HTC box firmware(as explained above) Os only, so i didnt get the radio package. After installing it, to make sure i was up-to-date i went onto the wiki and downloaded the latest radio firmware for AT&T. It seems as if every time i put a SIM in i cant get edge or 3G signal. My house is typically both depending on where your standing and such. Any ideas?
Cool wiki updated
waterhurley said:
cool thanks. New problem though:
I have the HTC box firmware(as explained above) Os only, so i didnt get the radio package. After installing it, to make sure i was up-to-date i went onto the wiki and downloaded the latest radio firmware for AT&T. It seems as if every time i put a SIM in i cant get edge or 3G signal. My house is typically both depending on where your standing and such. Any ideas?
Click to expand...
Click to collapse
Okay. I think I understand your question, but could you explain exactly what the problem is? I mean do you want a constant signal on 3G or something? I don't understand exactly.
Related
Hi,
I want to do a complete upgrade on my T-Mobile MDA (US) to WM6. I want to be able to keep all of the T-Mobile features (Email, HotSpot, GPRS/EDGE, etc) and have all of the new WM6 features. Any help will be greatly appreciated.
Thank you in advance
you want to have your cake and eat it too.
Reading is fundamental. But the Search button is your friend. All the info you need is located in this forum. Don't expect handouts if your not willing to work.
I understand what he's getting at so don't flame, as some of these programs are actually built into the ROM, and may not be WM6 compatible. They also have at least one program and several icons placed by the extended ROM, so if you have a G4, you may be SOL if you use the IM program. Heck I'm going to be working on the same thing over the next three weeks, since I am a t-mobile customer back in the states. I've already managed to get two of the t-mob WWE AKU 3.3 OEM working (damn that's a lot of adjectives). I'll try to keep you up on my progress, but this is going to be slow going for the meantime.
meltaway said:
Hi,
I want to do a complete upgrade on my T-Mobile MDA (US) to WM6. I want to be able to keep all of the T-Mobile features (Email, HotSpot, GPRS/EDGE, etc) and have all of the new WM6 features. Any help will be greatly appreciated.
Thank you in advance
Click to expand...
Click to collapse
Save off your EXT Rom. You can reinstall these apps after your flash (provided all work in WM6)
As for your GPRS/EDGE and MMS you can use the cabs from your EXT Rom or you can enter the settings manually from the T-Mobile website.
Details on how to do these things are all over this forum. You need to read. Most likely you do not NEED WM6 you just WANT it. You need to determine if your want justifies the cost of replacing your device if you don't research properly before jumping in with both feet and mess it up. Do you know if your device is a G3 or G4 yet? If not read, read, read. There is no need for people to give you step by step instructions in your thread as there are already step by step instructions in the STICKY threads (you have read these, right?).
i have a program that allows u to mount the extended rom, then u can access the ext rom from file explorer and copy it to the mini sd. its attached as htweakc. also, i attached the t-mobile ozim instant messaging program. good luck
.:Nstefanelli:.
Thank you!
I appreciate everyone's feedback.
nstefanelli, thank you for attaching those files for me. I'm going to try them out this weekend.
I'll let everyone know how it goes.
T-Mobile Hotspot App
Hi,
On a related matter, does anyone have the T-Mobile Hotspot app handy? Do I need to install it into my non-TMobile Hermes if I want to subscrible to TMobile and use their Hotspots?
Kind regards,
Neil
no app is needed. i am on wm6 and NEVER installed the app. i was at SFO a couple months ago (i have had WM6 since early feb) and i used the WIFI just fine!
I decided to unlock my tilt and put a different ROM on it to make it faster.
But I need some help here.
1st - I just backed up my device using the PPCPimBackup.exe program
2nd - I am about to unlock my tilt with HardSPLv1.
After that procedure what ROM version does everyone suggest for the Tilt?
I have been looking at the AT&T Tilt AKU.0.7.0 Cooked ROM. Just Because it’s a tilt ROM if that makes any difference.
Heres the link to it --> http://forum.xda-developers.com/showthread.php?t=338002
Does anyone disagree with this ROM?
I am basically looking for a ROM that is going to have TouchFlo scrolling and be clean of all that crap that slows down the tilt. But I would like to install the IM program back on and some other cabs I found on this great site (ie. HTC Home plugin and task manager Register Editor and some others).
ALSO when i do install another ROM version will the AT&T settings be correct for my account? For my data plan and all?
Thanks in advance!
Im pretty sure i unlocked it right it said it was completed.
BUT
Everytime i try and flash my phone i get an error 262 update error: saying it has failed. it doesnt get past 0%
i have tried 3 times... i guess i will try and unlock it again...
dipp02 said:
I decided to unlock my tilt and put a different ROM on it to make it faster.
But I need some help here.
1st - I just backed up my device using the PPCPimBackup.exe program
2nd - I am about to unlock my tilt with HardSPLv1.
After that procedure what ROM version does everyone suggest for the Tilt?
Click to expand...
Click to collapse
i'm using austinsync's big storage rom found here (the one under "Breaking News") and so far it works the best for me. i have an at&t tilt, did the same thing you're about to do/did and started with the htc ship rom. the htc rom was a large improvement from the at&t rom and out of curiousity rather than need i flashed all of the cooked rom variants floating around. helmi_c rom's are good but i found the tilt variant made my device sluggish. i haven't done any objective analysis but on my device any rom with ptt (push-to-talk: not-free, at&t wireless feature/add-on) i experience severe device lag. currently i'm running austinsync's big storage rom.
dipp02 said:
I am basically looking for a ROM that is going to have TouchFlo scrolling and be clean of all that crap that slows down the tilt. But I would like to install the IM program back on and some other cabs I found on this great site (ie. HTC Home plugin and task manager Register Editor and some others).
Click to expand...
Click to collapse
again, personally running austinsync's rom right now and looking at your list i can say this rom (austinsync's) fits all of your requirements except a registry editor but that's something you'll have to download on your own regardless; most rom's will not include a registry editor.
dipp02 said:
ALSO when i do install another ROM version will the AT&T settings be correct for my account? For my data plan and all?
Click to expand...
Click to collapse
i don't know what settings might be correct for your specific account but most, if not all, of the cooked roms have a program called "Connection Setup" that will automatically install your setting settings based on your SIM/Network. the program runs after initial flash and you have to do is select "ok" or "yes" when prompted whether or not you want "Connection Setup" to automatically install your settings. i can't remember but the rom i'm running now does not have "Connection Setup" automatically run upon start-up. the program is installed just not set to automatically run, austinsync can correct me if i'm wrong. personally i like entering my settings manually or else via a cab i created but to each his own.
Awesome Info!!!
Thanks for your reply bud i will try that!
DiscoSmurf - i cant download from rapidshare already did today ... can you share it with me somehow? if not i guess ill wait
I second austinsync's Big Storage ROM... I've found on my Tilt it to be the best of what I want, and it's compeletely open for me to customize as I see fit. Very stable, does everything I want and it looks great out of the box.
Good luck!
dipp02 said:
DiscoSmurf - i cant download from rapidshare already did today ... can you share it with me somehow? if not i guess ill wait
Click to expand...
Click to collapse
sure, download it here
ChaOConnor said:
I second austinsync's Big Storage ROM... I've found on my Tilt it to be the best of what I want, and it's compeletely open for me to customize as I see fit. Very stable, does everything I want and it looks great out of the box.
Good luck!
Click to expand...
Click to collapse
i downloaded the first one austinsync posted last night... so far i like.
Should i be using the one under breaking news?
Thanks again guys
never tried the one you initially downloaded so can't comment on performance
DiscoSmurf said:
sure, download it here
Click to expand...
Click to collapse
THANKS!
i can update from rom to rom i take it right?
run Hard-SPL. double check it installed correctly by putting your phone in bootloader mode, which is done by:
-hold down the camera-button and the power-button simultaneously.
-stick stylus into the reset button-thingy
kind of tricky with the camera and power button on the same side but you'll see four horizontal bars colored red-green-blue-white from top to bottom when you do it right.
look to see that your SPL matches the following (the KAIS and CPLD are quasi-irrelevant):
KAIS
SPL-1.0.OliPof
CPLD
if it matches, you can flash any of the Kaiser ROMS. if not, repeat by starting over and re-install Hard-SPL.
-ds
DiscoSmurf said:
run Hard-SPL. double check it installed correctly by putting your phone in bootloader mode, which is done by:
-hold down the camera-button and the power-button simultaneously.
-stick stylus into the reset button-thingy
kind of tricky with the camera and power button on the same side but you'll see four horizontal bars colored red-green-blue-white from top to bottom when you do it right.
look to see that your SPL matches the following (the KAIS and CPLD are quasi-irrelevant):
KAIS
SPL-1.0.OliPof
CPLD
if it matches, you can flash any of the Kaiser ROMS. if not, repeat by starting over and re-install Hard-SPL.
-ds
Click to expand...
Click to collapse
Everything is working great!!! thanks
Just one more thing...
i had problems with my data network.
i just made a new connection called Media Net that dials to wap.cingular and it seems to be working fine.
is that right?
Thanks
dipp02 said:
Everything is working great!!! thanks
Just one more thing...
i had problems with my data network.
i just made a new connection called Media Net that dials to wap.cingular and it seems to be working fine.
is that right?
Thanks
Click to expand...
Click to collapse
simple answer; yes.
post if you run into any problems.
-ds
I dont know how to tell what version I am running but I know its something in the windows mobile 6 area. How can I check then upgrade if needed my windows mobile version number?
I want to use Dutty's new ROM but I believe that I dont have the right windows mobile right now but I am not sure. I just got this phone a few days ago, so stock everything.
One last quick question will I have to update my radio, and would that effect how my wireless company treats me (Att is evil)
sielk said:
I dont know how to tell what version I am running but I know its something in the windows mobile 6 area. How can I check then upgrade if needed my windows mobile version number?
I want to use Dutty's new ROM but I believe that I dont have the right windows mobile right now but I am not sure. I just got this phone a few days ago, so stock everything.
One last quick question will I have to update my radio, and would that effect how my wireless company treats me (Att is evil)
Click to expand...
Click to collapse
You don't have Windows Mobile 6.1 on your Tilt. The tilt comes stock with Windows Mobile 6.
First I would advise you before anything to read the first thread, specifically the one dealing with HardSPL. Before you flash to Dutty's ROM make sure that you have HardSPL flashed. After that you can flash to whatever ROM you want.
If you do decide to upgrade to Windows Mobile 6.1 you will need to flash to a new radio. There is also a sticky for this with download links and location. Your best friend at this time would be the Kaiser Wiki, which is also located in the first thread. I would highly advise that you take an hour and read up on how to do everything that your asking and familiarize yourself with the techniques of flashing / upgrading.
...and to answer your last question, no updating your radio would not effect your service with AT&T the evil empire
How would I upgrade to WM 6.1
Also I just finished with flashing HardSPL
sielk said:
How would I upgrade to WM 6.1
Also I just finished with flashing HardSPL
Click to expand...
Click to collapse
if you indeed have hardspl now, then pick a 6.1 rom and 6.1 radio and have fun configuring.
sielk said:
How would I upgrade to WM 6.1
Also I just finished with flashing HardSPL
Click to expand...
Click to collapse
If you would like to try dutty's just download the ROM from the listed locations in the 1st thread. There are a couple to choose from. I would also highly advise you to read through the second post. This gives you a lot of information about configuration, best results, before and after flashing. Also gives you some detail on how to configure your device. Let me know if you have any more questions.
Here is a link for Dutty's WM6.1 official ROM. http://www.4shared.com/file/3801940...ial_WM611_Release.html?dirPwdVerified=1f45688
Hard SPL Issues
I've been reading all of these threads for the past month(over 30 hours). I downloaded the HTC Kaiser, and the HTC home plug in, but after downloading the new 6.1 I can no longer get access to the internet which is imperative. I've downloaded the HardSPL and I deleted everything else, and once again I can't get to the internet. What am I doing wrong? Please help, I'm about to go on travel and I really need the internet. If I will be forced to use this basic brick without all the luxuries, I guess I will have to, but I don't want to.
MsAzzy said:
I've been reading all of these threads for the past month(over 30 hours). I downloaded the HTC Kaiser, and the HTC home plug in, but after downloading the new 6.1 I can no longer get access to the internet which is imperative. I've downloaded the HardSPL and I deleted everything else, and once again I can't get to the internet. What am I doing wrong? Please help, I'm about to go on travel and I really need the internet. If I will be forced to use this basic brick without all the luxuries, I guess I will have to, but I don't want to.
Click to expand...
Click to collapse
Which ROM do you currently have installed? Have you tried any of the configuration cabs. Which mobile service provider do you have?
I have the new 6.1 rom, I downloaded duttys new 6.1 release and it still did not work. I've had tons of cabs, Schen, schaps, etc... & I have at&t
After the new 6.1 nothing will work anymore, I can't even get WiFi, I even went to the extreme of returning the phone to AT&T today because I swur it was the device and not the software
I think I'm about to go nuts, I've read the ALL Wiki, I've read Modaco, I've read the 1st sticky post, I've read the HTC support forums, but I can't get this thing to work properly.
bump, sorry but I need the internet, and it's urgent! Someone please help
MsAzzy said:
bump, sorry but I need the internet, and it's urgent! Someone please help
Click to expand...
Click to collapse
Does any of your sound work? Does your camera work. The only reason I ask this is that you might have a radio problem.
If you do have sound...then try to install this cab.
http://shogunmark.com/Documents/shogun_cing.cab
yes the sound works, I just can't connect to the internet. I was able to listen to my music with and without the headphones today. Please help with the internet issue, that's all I need right now, I can worry about the sound later...
Go to start ->settings->connections->advanced->select networks
Make sure the programs are supposed to connect through media net. Once you've selected media net, hit edit, then click the proxy settings tab. Uncheck uses proxy server.
That should fix it, if there isn't even a media net option, you need a cab to fix it.
I've done all this, I've actually sat on the phone with tech support for 2 hours today resetting the internet connections, and it still did not work, hence me returning the phone for a replacement today.
Trust me you guys, I've done all the basic fixes...
What version of radio do you have? There might be a better way to check it, but the easy way is to reboot the phone, it's the number next to the R
I've done a SR and a HR. The HR is the only thing that brings me back to getting access to the internet, which is the only thing that works, however it removed all of my add-ons
agreenagent said:
What version of radio do you have? There might be a better way to check it, but the easy way is to reboot the phone, it's the number next to the R
Click to expand...
Click to collapse
the radio version I have is 1.27.14.09
A hard reset lets you access the internet?
(Also, settings->device information give you the rom info, too)
MsAzzy said:
I've done a SR and a HR. The HR is the only thing that brings me back to getting access to the internet, which is the only thing that works, however it removed all of my add-ons
Click to expand...
Click to collapse
that tells me that one of the cabs you installed had some ill effect on your settings. try the internet after each cab you install and that way you can find the culprit causing you problems.
Ohh, go here:
http://forum.xda-developers.com/showthread.php?t=349375
Get radio rom 1.64.06.04 and install that
HI can anyone tell me where to get new skype from 2.07 rom ???
thanks in advance.
You won't find anyone with it here. The best solution is to simply flash to a ROM that has it.
I have so much data on phone can't backup all of it so dont wana change rom for time being........
Im not sure where to grab the version of swype that has been extracted from the 2.07 rom... i am trying to find it myself!
The swype cab created from the version ripped from the Samsung Omnia 2 is all over the web though... google should bring up a couple of places to download it from.
Does anyone know of any differences between the two versions?
Audio Oblivion said:
Im not sure where to grab the version of swype that has been extracted from the 2.07 rom... i am trying to find it myself!
The swype cab created from the version ripped from the Samsung Omnia 2 is all over the web though... google should bring up a couple of places to download it from.
Does anyone know of any differences between the two versions?
Click to expand...
Click to collapse
You will have to search in the underground... Extracting the software and offering it as a cab is clearly not wanted by the creators and owners of the software. Offering links to warez is completely against xda rules.
The difference between the 2 might be some more language support, and that the HD2 version was made for HD2, as simple as that. I think it still might be an option to flash a ROM which carries it on board - or, at least, as long as this is tolerated.
Maybe in the close future, HTC will bring another ROM update which offers this great piece of software. Or, as stated otherwise, Swype might decide to make a retail offer at some time. If they do at a decent price, I believe they could do great business - as seen with other products, at unreasonably high prices, you won´t sell big, but at fair pricing, you can succeed.
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Karlos G said:
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Click to expand...
Click to collapse
pocketnow.com has written a nice article about it. Read it
i downloaded new version from pockernow article. noted some minor improvements.....
Karlos G said:
I cannot find the new version anywhere!
If anyone has a link or would like to email it to me that would be very much appreciated!!
Click to expand...
Click to collapse
Are u refering to version 3.9?. I installed that and it reset my email pwds
Cheers!
It's also here http://forum.xda-developers.com/showthread.php?p=5679513
Hmm I get an error saying "Cannot Open English File" when Swype starts up anyone else having this?
kivine said:
Are u refering to version 3.9?. I installed that and it reset my email pwds
Click to expand...
Click to collapse
I had the same thing, only installed yesterday so didn't do much checking of the phone. Quite a few problem were caused by the T-Mobile version . Data connection is screwed and all email passwords needed to be reset and my Wifi password are also gone lol. Did some reading online as well and quite a few other people have experienced the same problems, some have even had to HARD RESET to get their phones working correctly, fortunetly for me just uninstalling the CAB and giving the phone a few minutes resolved my Data connection issues , will put back on the Omnia version and leave it at that for the time being.
So I advice using the newest version of Swype with EXTREME caution!!!!
I tried it after much hesitation... Had to do a new setup for all email accounts, data connection and wifi connection. But it seems to be fine now, I'll see in a few days if it stays like that.
I'm using SWYPE WVGA 3.9.10.10.5032 on my HD2 without any problems.
xavierdemon said:
I had the same thing, only installed yesterday so didn't do much checking of the phone. Quite a few problem were caused by the T-Mobile version . Data connection is screwed and all email passwords needed to be reset and my Wifi password are also gone lol. Did some reading online as well and quite a few other people have experienced the same problems, some have even had to HARD RESET to get their phones working correctly, fortunetly for me just uninstalling the CAB and giving the phone a few minutes resolved my Data connection issues , will put back on the Omnia version and leave it at that for the time being.
So I advice using the newest version of Swype with EXTREME caution!!!!
Click to expand...
Click to collapse
Had the same, but all I had to do was re-enter the passwords (and mail servers for gmail) and re-run the connection setup wizard. Now I'm fine and dandy and the software is nothing short of awesome... Supports Italian, German, French, English and Spanish; I tested all languages and it works fine
I'd say it is a crucial addition to the HD2, as I use it every day, and it makes my text input much less of a chore. It is particularly useful because of its multi-language support. I've never had any problems like those described, thankfully.
have you guys done any soft resets since the initial reset after installation? I also found the keyboard became slow to start after I played with the setting. the omnia 2 version is working better for me and with the htc skin looks awesome.
READ THIS BEFORE INSTALING THE NEW SWYPE! (v3.9)
Original Post
http://forum.ppcgeeks.com/showpost.php?p=1578221&postcount=50
PPCGeeks User said:
I can't believe no one else posted this...
If you overwrite the ModelID with the file provided, you are effectively telling your phone that you are now....a...tmobile hd2.
The swype keyboard has protection in it...only a tmobile hd2 will work with it.
hence why you need the modelid
now here is the kicker...
Say sprint - you run sprint tv. get an error. wanna know why? sprint asks "what phone" and your phone replies "tmobilehd2.
Same thing with prl updates...
I think you get the point...
when you overwrite the modelid, all exchange accounts - gone (sorta). Your 4 digit pin become a lockout - no pin will unlock it.
in short, bad things happen.
And this is why you always provision your phone before you set it up. part of provisioning is setting the modelid...
which is why people on mighty that forgot to provision before seting up exchange need that fix e-mails cab...
any questions?
Click to expand...
Click to collapse
@leepriestenator, if I don't use any provider software, I can install swype without any problem right ?
leepriestenator is correct. Thanks. As our phones are all unlock where we are, the problem is just resetting the mobile provider. It is working fine on my phone, though the phone identity is now T-mobile_Leo.
Having said that, it is a much improved version over the one in Samsung.
I've looked everywhere for the answer, but can't seem to find it.
I am having trouble copying text messages from my SIM-card to my phone memory.
Is there anyone who knows how to solve that issue? I am using an HTC Diamond with WM6.5.
Thanks a lot.
EC
Bump for visibility.
hahahahaha I had tried this for a very long time!
Seriously it too annoying!
In the end all I could do is :
put my sim in a nokia phone
transfer messages to the phone
sent them to diamond via bt!!
Sorry for the lame solution, but there is no other way!
Asus sim manager
Asus sim manager(any version) does it
Sorry dont have .exe n other related files.
see
http://forum.xda-developers.com/showthread.php?p=7650078#post7650078
donsalari said:
hahahahaha I had tried this for a very long time!
Seriously it too annoying!
In the end all I could do is :
put my sim in a nokia phone
transfer messages to the phone
sent them to diamond via bt!!
Sorry for the lame solution, but there is no other way!
Click to expand...
Click to collapse
Thanks, but the phone hasn't got bluetooth, and I do not have another phone atm. I will look further into this though, thanks.
Walla_j said:
Asus sim manager(any version) does it
Sorry dont have .exe n other related files.
see
http://forum.xda-developers.com/showthread.php?p=7650078#post7650078
Click to expand...
Click to collapse
Great, but I cannot find the sim manager files, only ROMs containing it (dumping them would take a lot of time). Is there any way you could send it to me?
Thanks.
EC
allright, here's quickmade cab of asussimmgr.
idd, there's option to copy sim msgs into device(and from device to card) there, hmm nice.
i am not sure, if it will work for HTC devices(i've added policy to cab that should allow that), but i think it should.
Thanks
Thanks pupakota
hope it helps others
Walla_j said:
Thanks pupakota
hope it helps others
Click to expand...
Click to collapse
i'd be glad, if it works
Just downloaded and trying it out right now...
And YES, it works! I am very glad you guys helped me out!
Thanks a lot!
You can also use apps below to save the sms located on sim card & import to device.
Have done so on wm2003se wm5 wm6 wm6.1 & wm6.5 custom ROMs
i don't exactly know what you guys here are talking about...
but if its simply about copying a sms from the sim to the phone (as the title suggests) then i don't see how come no one's posted the most obvious solution i've used myself before...
just as background info to those who need to know- i'm running a com5 23569 self-cooked rom on my htc gene (p3400)
and i stumbled upon the solution to this problem you mentioned while going through one of the millions of flashes and restores we chefs go through...
all i did to copy the message onto the phone memory was open the msg to view it and then hit the left soft key to open the menu and the last option on the menu list simply reads 'copy to phone'...i tap on that and voila!! its done...
do let me know if it works coz i don't think it would be this simple and yet left untried by anyone else and requiring external apps to be installed for it to be done...
psychocyst said:
i don't exactly know what you guys here are talking about...
but if its simply about copying a sms from the sim to the phone (as the title suggests) then i don't see how come no one's posted the most obvious solution i've used myself before...
just as background info to those who need to know- i'm running a com5 23569 self-cooked rom on my htc gene (p3400)
and i stumbled upon the solution to this problem you mentioned while going through one of the millions of flashes and restores we chefs go through...
all i did to copy the message onto the phone memory was open the msg to view it and then hit the left soft key to open the menu and the last option on the menu list simply reads 'copy to phone'...i tap on that and voila!! its done...
do let me know if it works coz i don't think it would be this simple and yet left untried by anyone else and requiring external apps to be installed for it to be done...
Click to expand...
Click to collapse
regardless of fact, if it is working, i wish luck to anybody with many messages..not especially automated process, if you ask me.
for cooks(that flash frequently) matter is entirely different, btw.
ppcpimbackup.
pupakota said:
regardless of fact, if it is working, i wish luck to anybody with many messages..not especially automated process, if you ask me.
for cooks(that flash frequently) matter is entirely different, btw.
ppcpimbackup.
Click to expand...
Click to collapse
don't usually have to contend with too many messages myself...this only arises when i put my sim into a temp phone while the flashing process completes...and at worst i have 4-5 messages to contend with...
ppcpimbackup is my first pick too but i don't remember trying it out on sim messages...worth a shot though...
WOW plenty of options available! thank you guys.
@psychocyst : just saw your sig. loved it