Related
ive been trying to read up on everything but it seems that a lot of the information assumes i know at least a little about what im going to do. I really dont know anything and the tilt will be my first wm phone ever. i have never flashed a phone before but i would love to use duttys rom that i came across on this site, please tell me if these steps are correct for flashing my tilt before i go ahead and try it (dont wanna mess it up)
1. first i will do the hard-spl flash to allow flashing of the roms on my tilt- found at this thread http://forum.xda-developers.com/showthread.php?t=334679 seems easy enough
2. i download duttys hybrid build no. 4
3. it seems like the easiest way to flash my tilt is to do it from a micro sd card? i found these steps at this thread http://forum.xda-developers.com/showthread.php?t=332246
1. Get a 128MB MicroSD card (or whatever size you like) and format it (***please make sure you format it, but not just delete all contents on it)
2. find the ROM image you would like to use, normally namede RUU_Sign.nbh, and rename it to "KAISIMG.nbh"
3. Plug the card into the phone, then enter boot loader mode by pressing down the Power and Camera buttons simultaneously, and using the stylus at the same time to press the RESET button at the left side. Continue pressing the two buttons for a few seconds after pressing and releasing the reset button until the bootloader screen appears. (taken from Wiki)
4. You will first see a tri-color screen then the information on the card. Press power button to start flashing.
5. After all these are done, press the reset button located at the bottom of the phone to reset the device.
4. Is flashing the rom really as easy as these steps ^ make it seem to be? just put duttys RUU_sign.nbh renamed to KAISIMG.nbh on the formatted card, then do the reset instructions and follow the rest?
thank for the time and responses, sorry if there are more simplified instructions somewhere, but i hope i figured it all out before i try this.
I actually think the easiest way is through activesync, clicking on the executable that is usually given. but your first 2 steps is right.
ok so if i do 1 and 2
then i just put both files (the exe and the nbh on the phone) and run the exe from the phone? and thats it? lol
also what would you say the chances are of a total noob (like me) bricking a $400 phone...
EDIT: so i assume this: To Flash a ROM or Radio simply use a tool to convert the .nb files in to .nbh format Dutty's NBH tool works great! then copy pof's Kaiser Custom_RUU into the same folder and then run the Custom_RUU and your device will start the upgrade process. With the new RUU when you flash a splash screen or radio only your device will not hard reset!
i dont have to do the conversion for duttys because the files are already .nbh, correct?
You don't put the .exe and .nbh on the phone. Make sure you have an Active Sync connection to the phone, extract the files to your PC and run the .exe. The .exe goes through pre-checks to make sure your phone is ready to flash. Just make sure you have HardSPL on your device before doing anything. Should be straight forward.
Good luck.
ooo ok, i havent gotten the phone yet so i dont really have any thing to look at im just reading up on it, but that clears most/ if not all of my questions thanks a lot - both of you =)
Hello,
well I have an HTC Kaiser and upgraded it to WM 6.1. However, now I'm experiencing some serious software incompatibility issues. So now I'd really like to downgrade to WM 6 again. I downloaded a German WM 6 custom RUU file with the WM 6.0 ROM, however that didn't work. Could anyone *please* provide some instructions on how to downgrade the device to WM 6 again? Thanks!!!
Robin24
robin24 said:
Hello,
well I have an HTC Kaiser and upgraded it to WM 6.1. However, now I'm experiencing some serious software incompatibility issues. So now I'd really like to downgrade to WM 6 again. I downloaded a German WM 6 custom RUU file with the WM 6.0 ROM, however that didn't work. Could anyone *please* provide some instructions on how to downgrade the device to WM 6 again? Thanks!!!
Robin24
Click to expand...
Click to collapse
Use the search button before posting Bub.
Everything about that was already said.
What "didn't work" with the ROM downgrade? I was able to downgrade to Windows Mobile 6 perfectly
People get confused because they think of it as an upgrade/downgrade. Merely flash a WM6.0 rom as you normally would.
Hi,
first, I wasn't able to find anything usefull with the search function, all the threads I found rever me to the wiki where I can't find anything usefull, lots of information about ROM up and downgrades, but nothing straightforward really.
Second, the RUU program starts the downgrade process and can read the build information on my device, but fails to downgrade and offers me some recovery tips. I hard reset the device, no success...
Robin24
robin24 said:
Hi,
first, I wasn't able to find anything usefull with the search function, all the threads I found rever me to the wiki where I can't find anything usefull, lots of information about ROM up and downgrades, but nothing straightforward really.
Second, the RUU program starts the downgrade process and can read the build information on my device, but fails to downgrade and offers me some recovery tips. I hard reset the device, no success...
Robin24
Click to expand...
Click to collapse
Try flashing the ROM with the Micro SD Card
Instructions
1. Get a MicroSD card that is formatted as Fat32. The card must be formatted as Fat32 otherwise it will not work. It doesn't need to be blank or freshly formatted (but it wont hurt if it is). An easy way to check if youre MicroSD are Fat32 is to use Pocket Mechanic and check "Card Information", Pocket Mechanic are licensed but trial are free.
2. Find the ROM image you would like to use, normally named RUU_Signed.nbh, and rename it to "KAISIMG.nbh". Depending on the source of your ROM file, it may not be named RUU_Signed.nbh, but just rename the nbh file you obtained to KAISIMG.nbh
3. Copy the file KAISIMG.nbh to the root of your microSD card
4. Plug the card into the phone, then enter boot loader mode by pressing down the Camera button, then using the stylus, press and hold the RESET button at the bottom of the phone. Release both buttons once the bootloader screen appears. (Kaiser Resets)
5. You will first see a tri-color screen then the information on the card. Press power button to start flashing.
6. After all these are done, press the reset button located at the bottom of the phone to reset the device.
All this information it's on the wiki
Hi,
thanks for this guide. I found it in the Wiki before, but didn't know where to get an NBH file from. However, I just found one in the custom RUU folder I downloaded. I renamed it to KAISIMG.nbh and copied it to the storage card. I'm not sure about how it is formated as I can't access the PDA to check, but I think these cards come formated as FAT32 by default and I didn't change anything there. When I reset the device while holding the camera button, it shows me some info about the KAISIMG file I think. However, when I press the power button nothing happens. Any ideas? Thanks!
Robin24
I have searched these information because I'm a Mac user.
Ok. I have searched the web for a whole day, and I've got the information I need. I've already Application unlocked my phone by editing the registry, and SuperCID unlocked my phone by installing the Cert.cab (I'm really not sure about this, because you will click on something like "Set CID" on a PC).
These are the links and information that I've found:
http://forum.xda-developers.com/showpost.php?p=1018902&postcount=6
http://forum.xda-developers.com/showthread.php?t=295735
http://forum.xda-developers.com/archive/index.php/t-315977.html
The first link is for Typhoon, but I guess it's only the same process used with Tornado. The second link is for Hermes, also used the same process for upgrading. The third one is just some random link about Crossbow on smartphones.
So, I have the files from karhoe's guide:
http://karhoe.net/myfiles/illi_WM6.1_remade_by_rickwyatt_v2a.zip
It's the WM6.1 Standard made by rickwyatt. I found the "nk.nbf" file, and renamed it to "TORNIMG.nbf". I formatted my miniSD card to FAT32. It also says on the links above that you should copy the "xxxxIMG.nbf" (xxxx means the first four letters of your device) in the root folder of your miniSD card, and access the bootloader on your phone by holding down the camera button together with the comm manager button and by hitting the power button. Confirm flashing on screen, and wait until the process is finished (do not reset it, will take about 30min).
I haven't done this yet 'cause I'm not sure if my phone is SuperCID.
My questions are:
1. I have my phone application unlocked by editing something on the registry, and installed "Cert.cab" from SPV-Services. But I'm not sure if my phone is SuperCID, 'cause I think you'll be doing something like this: http://karhoe.net/images/stories/wm6upgrade/step6.jpg
2. Am I going to brick my phone by doing this?
1. No your phone doesn't superCid by installing cert.cab!! You must use SPVservices for it!!
PLEASE READ THE *FAQ* BEFORE FLASHING OR ASKING QUESTIONS!!
This *Easy Guide* is for the all the Noobs that want a New Rom but are getting confused and dont want to brick their nice new phone.
I used Jockys HardSPL v3.29 and OliPros' CID Unlocker for this.
Before you start, backup anything on your phone that you might want to keep after the new Rom has been flashed because all contacts/ emails/ texts/ notes/ Internet BookMarks/ ect. WILL be lost!!
PimBackup is good and free (copy any mms attachments to your storage card or computer seperately)
If you get stuck in the Bootloader Screen (Tri-Colour Screen with text in the top left) go *HERE* (thanks to DaveShaw)
*STEPS 1 - 4 ONLY NEED TO BE CARRIED OUT ONCE. ONCE YOU HAVE FLASHED HARDSPL YOU DONT NEED TO DO IT AGAIN WHEN FLASHING NEW ROMS OR RADIOS*
*DO NOT start another process while the flashing process is taking place*
*DO NOT click off of the status bar... Let it stay in the foreground*
*DO NOT let the ScreenSaver activate*
(any of these can lead to a bad flash and possibly brick your phone)
1. MAKE SURE YOUR KAISER HAS AT LEAST 50% BATTERY POWER FIRST
2. Download and Unzip *THIS* File
3. Flash HardSPL 3.29 [ESSENTIAL]
Flashing via ActiveSync with USB Lead
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
5. Connect your phone to PC with a USB cable and wait until it syncs with your PC
6. Run File Explorer on your phone, browse to where you copied JumpSPL1.56-KAIS.exe on your device and run it (make sure the USB cable is still connected). If you get a white screen then reset your device and now try JumpSPL1.93 and lastly try JumpSPL1.94 if that one doesnt work.
7. CLick Continue on phone when prompted
8. After a few seconds the tri colour screen will appear on the phone and "USB" will be displayed at the bottom
9. Unplug the usb cable for 30 seconds and then Replug (phone will not re-sync but still says "USB" on the screen)
10. Right click on the Activesync icon in the bottom corner icon on the computer, goto connection settings, deselect "Allow USB connections" and click "ok"
11. Run the KaiserCustomRUU.exe file on your PC thats in the same folder as the HardSPL .nbh file and follow instructions (ticking boxes and clicking Next) *DO NOT re-enable USB Connections in Activesync*
12. Update will goto 100% (should take less than a minute), the Congratulations screen will be displayed on the PC and the phone will restart
13. Unplug USB cable from phone then REPLACE SIM and SD CARDS !!
14. Restart phone
*Remember to re-enable "Allow USB connections" in Activesync connection settings after a successful flash*
Flashing via MicroSD Card using cmonex HardSPL 3.29 [OPTIONAL]
FOR UPGRADING HARDSPL ONLY!! THIS WONT WORK UNLESS YOU ALREADY HAVE HARDSPL ON YOUR PHONE
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download Cmonex's HardSPL 3.29SD, unzip it and copy the 2 files into the root of your MicroSD Card
(KAISDIAG.NBH is basically an SSPL patched to load from SD without booting OS)
(KAISIMG.NBH is cmonex HardSPL 3.29)
3. Insert the microSD Card into the phone
4. Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
5. It should say Loading / Update in progress and then to a screen saying SPL 1.00.OliNex
6. It should now say Press Power Button to flash or just flash the KAISIMG.NBH and then reset
7. At this point it should boot to the OS, if it doesn't then flash an OS (delete the previous KAISDIAG.NBH and KAISIMG.NBH from the SD Card and use Flashing Rom from MicroSD Card method)
8. After the Operating System loads, DELETE the KAISDIAG.NBH and KAISIMG.NBH files
*To check HardSPL version on your phone Enter Bootloader by Holding in the Power and Camera buttons, press the reset button with the stylus for 3 seconds until the tri-colour screen appears, then read the 2nd line which is the SPL version*
4. SIM and CID-Unlock [OPTIONAL]
For more reading go *HERE*
* YOUR DEVICE MUST BE SYNCHED WITH YOUR COMPUTER BEFORE RUNNING EACH STEP *
*Put your phone into Bootloader and update to a 6.1 Rom first if you get a black screen after Flashing the Patched Radio*
*If the program wont run u may need to install Microsoft .NET 2.0 on your computer to get it working*
1. Make a note of your current Radio in case you need to flash it back
2. Run KaiserUnlocker.exe, follow the instructions
(if you already have HardSPL on your phone you can skip straight to Step2)
3. After patched Radio has been flashed phone will restart and sync with the computer
4. On the Unlocker Program it should say Radio Patched at the bottom
5. Click on Step3 (Run Unlocker). This will bring up the Unlocker screen on your phone
6. If you want to check the status of your Sim Lock or CID Lock click the appropriate buttons
7. Click on Remove Sim Lock and Set CID, then click "Commit Changes"
* IF YOU DONT NEED TO FLASH A NEW ROM THEN PROCEED TO STEP6 TO PUT YOUR DESIRED RADIO BACK*
5. Download and Flash your Prefered Rom
Flashing Via ActiveSync
1. REMOVE SIM and microSD CARDS !!
2. Turn phone back on and wait until it syncs with your PC
3. Run the KaiserCustomRUU.exe from the Roms Folder
4. Once phone finishes flashing, resets and gets to the screen where it configures the stylus, HARD RESET
(press left and right softkey buttons on the front and hold in reset with stylus until message appears)
5. When prompted, Press "Send Button" (Green Call Button on Front) to Clear Data
6. When prompted, Press "Send Button" (Green Call Button on Front) to Restart Phone
7. Follow onscreen instructions to set up your New Rom
8. Once phone has gone through customisation procedure then replace Sim and microSD Cards
9. Turn phone back on and set up as required
Flashing Via MicroSD Card
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the Kaiser Rom Develpoment Page and unzip/unrar it to your computer
3. Goto the Roms Folder and rename the .nbh file to KAISIMG.nbh
4. Copy the KAISIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Hold in the Power and Camera buttons, then press the reset button with the stylus for about 3 seconds until the BootLoader screen appears
7. You will first see a tri-color screen with the phone and SPL Information at the top
8. A message will then pop up asking you to press the Power button to start the update
9. Press power button to start flashing
10. Once phone finishes flashing and says Update Complete, reset with the stylus
11. When it gets to the screen where it configures the stylus, HARD RESET
(press left and right softkey buttons on the front and hold in reset with stylus until message appears)
12. When prompted, Press "Send Button" (Green Call Button on Front) to Clear Data
13. When prompted, Press "Send Button" (Green Call Button on Front) to Restart Phone
14. Follow onscreen instructions to set up your New Rom
If you have a Tilt and have problems with the Hardware Keyboard after flashing just install *THIS*
6. Flash Prefered Radio if Desired [OPTIONAL]
Note: Most of the newer Roms come with a Matched Radio included but if you need to update your Radio then look here:
The Ultimate Radio Thread and find a Radio that matches your Rom.
*MAKE SURE YOU HAVE HARDSPL ON YOUR DEVICE AND AT LEAST 50% BATTERY BEFORE FLASHING*
Flashing Via ActiveSync
Sync your phone with the computer and run the KaiserCustomRUU.exe from the Radio's Folder
Flashing via MicroSD Card
Use same method as Flashing a Rom via MicroSD except after Radio has flashed, press the reset button with the stylus to reset the device.
7. Job done Well Done YOU DID IT.
I have attached all the files needed so you dont need to hunt around for anything. Good Luck.
*DISCLAIMER*
I take no responsibility for any fault, or damage caused by any procedures in this guide. No warranties of any kind are given.
Flashing your First Rom (For Noobs)
** FREQUENTLY ASKED QUESTIONS AND HELP WHEN FLASHING **
*BEFORE FLASHING A NEW ROM PLEASE PLEASE PLEASE READ THE LIST OF INSTALLED APPS INCLUDED IN THE ROM. ALSO READ THE ROMS THREAD FROM THE DATE YOUR VERSION WAS UPLOADED TO GET INFORMATION ABOUT ISSUES OR PROBLEMS SO YOU KNOW EXACTLY WHAT YOU ARE PUTTING ON YOUR PHONE*
1. What are the benefits of flashing a new rom?
2. What is the SPL (Second Program Loader)?
3. What are the different types of Unlock? (answer by DaveShaw)
4. What is a Radio?
5. What is Manila2D?
6. Whats the difference between Hard and Soft Reset? (and How to perform a Hard Reset)
7. After I flash a Rom I dont have any sound in calls and the camera is black
8. I get an Error Code when trying to Flash
9. Flash gets Stuck at 17% and wont finish
10. Screen on phone goes black after flashing Radio for Sim Unlocking
1. What are the benefits of flashing a new rom?
Flashing a New Rom basically gets rid of all the bloatware thats included on Stock Roms and Flashes a Clean, Optimized, Fully loaded Rom that will squeeze every ounce of speed and stability from your phone. Chefs usually include all the programs you are ever likely to need and because the Rom has been cleaned out you are left with more memory to play around with.
2. What is the SPL (Second Program Loader)?
Read *HERE* for more information.
3. What are the different types of Unlock? (answer by DaveShaw)
The three stages of unlock are:
SIM: Allows you to use SIM's from another carrier. Can be done using codes or unlocker programs on xda-devs.
Security: Allows you to flash radios from another device - It does other stuff, but this is all the casual user will use it for
CID: CID unlocking is an old concept, nowadays you flash HardSPL instead. This lets you flash any ROM, Splash or Radio (depending on sec unlock) to your device. N.B. the CID is the carrier ID (e.g. HTC__001). The stock SPL's only let you flash ROM's that match the CID in the ROM image with the CID on your device.
Also, SuperCID is an even older concept no longer valid on newer devices.
4. What is a Radio?
The Radio is the Firmware that works between the Operating System and the Cellular Hardware. It handles the Sound, Camera, GPS, Phone Calls, etc. The Radio must be compatable with the ROM's Operating System or you may experience problems with your sound and camera.
5. What is Manila2D?
Manila2D is a Great Today Screen Plugin that disables all other plugins and replaces them with a fully loaded interface that gives you easy access to your phones programs. It has a customizable number of Sliding Tabs at the bottom, each tab giving you a screen specific to your needs.
The Tabs are as follows: "Home" has a clock, alarm mode, call history and calendar. "People" gives you a picture contact for easy calling or texting. "Launcher" lets you set up a list of programs that are easily accessable from one screen. "Messaging" and "Email" give you a very attractive and easy way to read and manipulate your messages. An "Internet" Tab with easy Internet Browser launching and the option to add one press shortcuts. "Location" lets you access your GPS quickly via GoogleMaps and "Weather" has great graphics to let you see what its like outside without having to step out of your door. "Photo" and "Music" lets you view your Media quickly without the need to run a seperate program and last but not least "Settings" gives you control of your Sounds, Wallpaper and Communications.
For more information on Manila2D Development and to download it go *HERE*
Most aspects can be customized using a great program called M2DC which you can download *HERE*
Manila2D is a beta plugin still in development and doesnt work at all well in Landscape mode, so its best to use it in Portrait mode and then flip out your keyboard once you are in the program you need to use. If that bothers you then dont use it.
6. Whats the difference between Hard and Soft Reset?
Soft reset is basically the same as rebooting your computer. Its done by pressing the stylus into the little hole on the bottom of the kaiser to the right of the usb connector. It just restarts the kaiser if you have been doing alot of stuff on it and want to speed it up or after installing some software that needs a soft reset to complete the installation.
Hard Reset is completely different and you would be hard pressed to do it by accident lol. Its done by holding down the left and right soft keys and then pressing the soft reset button with the stylus for approx 3 seconds. You will then be given the option to press the green send button which will wipe all stored data on your phone and return it to the orginal condition it was in after first flashing it. Hard Resets are performed after flashing to make sure nothing was left from your previous Rom or if something goes wrong on your phone and you want to go back to a fresh Rom without reflashing it.
How To Perform a Hard Reset (from the Wiki): Read *HERE*
7. After I flash a Rom I dont have any sound in calls and the camera is black
The Radio has to match the version of Rom you flash i.e. WM6.1, an incorrect Radio will give sound and camera problems. Read The Ultimate Radio Thread to find a Radio that matches the Rom there are lots to try on there if one doesnt work then try another.
8. I get an Error Code when trying to Flash
Read *HERE* for a list of all RUU Error Codes and possible solutions.
9. Flash gets Stuck at 17% and wont finish
Enter recovery mode to finish flashing by following these steps:
1. From the Rom Update Utility on the PC click "Recovery"
2. Disconnect the USB cable
3. Remove the battery for 3 secs
4. Put the battery back in and power up the phone
5. At this point the tri colour screen should appear
6. Connect the USB cable
7. Click "Update" and the RUU installer starts again and flashes.
10. Screen on phone goes black after flashing Radio for Sim Unlocking
The screen is black because the radio that is flashed to the phone to unlock it is incompatable with your current rom. As long as you have flashed HardSPL then you wont have any troubles.
If you are planning to upgrade your rom to a new one then flash it via the microSD Card method and then go back after and do the Sim unlock stage (remembering to flash back a compatable radio after you finish unlocking it). If you dont want to upgrade the rom then you need to flash a radio that works with your rom (see The Ultimate Radio Thread).
Thanks for the excellent post. What does ** YOUR DEVICE MUST BE SYNCED BEFORE RUNNING EACH STEP ** mean? Do you mean just ActiveSync? Doesnt ActiveSync just sync contacts, calendar etc., so how does that matter ?
mindspawn said:
Thanks for the excellent post. What does ** YOUR DEVICE MUST BE SYNCED BEFORE RUNNING EACH STEP ** mean? Do you mean just ActiveSync? Doesnt ActiveSync just sync contacts, calendar etc., so how does that matter ?
Click to expand...
Click to collapse
Yes it means ActiveSync and when you sync your phone with the computer it links the 2 so that you can perform flashes or run programs on your computer for use with the phone.
Nice one.
I often wanted to write this myself, but couldn't find the time for another project.
If one of the Kind Mods would sticky it...?
Just my opinion... if the chef's linked to this page as part of their "Instructions" it would save a few newbie questions.
My first ROM flash, back in the Wizard days, was: find a nice ROM, read instructions in the ROM thread, which linked me to a similar thread, then flash the ROM. Tada.
Ta
Dave
MOD EDIT: Ask and ye shall receive. I wonder if you could put in in the Wiki Too?
JimmyMcGee said:
MOD EDIT: Ask and ye shall receive. I wonder if you could put in in the Wiki Too?
Click to expand...
Click to collapse
It's mostly in there already, it's just disorganised.
I'd love to re-shuffle all the info into a proper order, but I'm waiting for the wiki upgrade first.
Ta
Dave
Just two comments.
There are two methods to Security Unlock your phone. The first one is the one mentioned in this thread. It seems to work well for some but in my personal case, it didn't (well, I'm still not sure about it). What can happen if you follow method #1 is that although the Tri-color screen states "Security Unlocked", once you flash a new radio, that message will dissapear. If this means that the phone isn't security unlocked anymore is something that remains to be cleared up. I did change my CID and it did remove the simlocks despite the message dissapearing once you flash back your original radio.
The second method is the one described here: http://forum.xda-developers.com/showpost.php?p=1837147&postcount=1
This is the Jockey method. It is a little more complicated than method #1 but it allowed to unlock my device and have the "Security Unlocked" remain in the tri-color screen no matter what HardSPL and Radio I flashed since I unlocked it.
I'm not saying that method #1 doesn't work, I'm just saying that in my particular case, the "SU" message didn't stay permanently and since I had my doubts, I tried method #2 which worked flawlessly for me.
Good Luck
Tony
Nice work mate
Nice job.
May also be worth mentioning that points 1 through 4 only need be carried out on any phone ONCE. After which, you can download and flash new ROMs to your heart's content, until you find the one that's right for you.
Bryn
brynweb said:
Nice job.
May also be worth mentioning that points 1 through 4 only need be carried out on any phone ONCE. After which, you can download and flash new ROMs to your heart's content, until you find the one that's right for you.
Bryn
Click to expand...
Click to collapse
Done. Thanks for pointing out
Small Addition
I would like to add to this post....
While the flashing process is taking place, DO NOT start another process.
DO NOT click off of the status bar... Let it stay in the foreground.
DO NOT let the screensaver activate either.
Any of these things can take processor time away from the flashing process and could possible "hiccup" the flash, causing a bad flash and possibly (slight possibility) brick the device. Especially if you are replacing the SPL.
There are alot of posts that tell how for the newbs to flash their device, but I see ALOT of posts that say "I followed the directions, but still bricked, HELP"
I can only wonder if they are starting the flashing process then going to internet explorer (or some other browser) or loading another program to ocupy their time while the flashing is going on which is causing a bad flash.
My thoughts......
Excellent tutorial. Thanks.
But, can you explain what SPL and CID stand for.
Whats hardSPL (or softSPL for that matter) And why do i need to unlock my CID!
Thanks again!
RedMist said:
Excellent tutorial. Thanks.
But, can you explain what SPL and CID stand for.
Whats hardSPL (or softSPL for that matter) And why do i need to unlock my CID!
Thanks again!
Click to expand...
Click to collapse
Second (ary) Program loader
Carrier ID.
Have look here for more information on SPL's hopefully it will clue you in: http://wiki.xda-developers.com/index.php?pagename=SPL Questions?
Ta
Dave
StevesDesigns said:
I would like to add to this post....
While the flashing process is taking place, DO NOT start another process.
DO NOT click off of the status bar... Let it stay in the foreground.
DO NOT let the screensaver activate either.
Any of these things can take processor time away from the flashing process and could possible "hiccup" the flash, causing a bad flash and possibly (slight possibility) brick the device. Especially if you are replacing the SPL.
There are alot of posts that tell how for the newbs to flash their device, but I see ALOT of posts that say "I followed the directions, but still bricked, HELP"
I can only wonder if they are starting the flashing process then going to internet explorer (or some other browser) or loading another program to ocupy their time while the flashing is going on which is causing a bad flash.
My thoughts......
Click to expand...
Click to collapse
Added any additions to make this process easier to understand and safer are welcome.
StevesDesigns said:
There are alot of posts that tell how for the newbs to flash their device, but I see ALOT of posts that say "I followed the directions, but still bricked, HELP"
I can only wonder if they are starting the flashing process then going to internet explorer (or some other browser) or loading another program to ocupy their time while the flashing is going on which is causing a bad flash.
My thoughts......
Click to expand...
Click to collapse
That is a good idea to make sure that it is clear to new users. Personally, in my experience when a user says "i followed the directions, but still bricked, HELP" it is because they PRETTY MUCH followed the directions, but forgot something when they were reading. It's really easy to do, but often leads to mistakes and undesired results.
Hi, thanks your wonderful instructions, I flashed my tilt to hyperdragon III. Just a few comments:
You mention remove sd and sim cards. Please also mention at what stage it is safe to put them back into the phone.
In section 3 step 10, you mention follow instructions. I dont think one should try to active sync (it is part of instructions of the rom upgrade software) since we disabled usb connection in activesync.
Thanks a million
I can't thank you enough for this tutorial. I was having a hell of a time finding exactly how to do it. I followed this step by step and it was a breeze. I had the new 6.1 ROM on my tilt and it was just pissing me off so now (thanks to you) I'm running HyperDragon III.
SPIDERTECH said:
I can't thank you enough for this tutorial. I was having a hell of a time finding exactly how to do it. I followed this step by step and it was a breeze. I had the new 6.1 ROM on my tilt and it was just pissing me off so now (thanks to you) I'm running HyperDragon III.
Click to expand...
Click to collapse
Im glad it gave you the confidence to upgrade to a great new rom its the reason I wrote it. XDA is a caring and supportive community and there will always be someone willing to help out if you need it. Mark.
This all speaks on Flashing your ROM..but how about
simply Flashing the Radio? What steps should I follow..and yes I am a newbee.
babyface215 said:
simply Flashing the Radio? What steps should I follow..and yes I am a newbee.
Click to expand...
Click to collapse
To be safe, all of them.
So I want to flash my T-mobile wing, but I barely understand what flashing is. Can't understand your terminology, ......and even though I find some roms, none of them have specific instructions on how to do this.
Thanks in advance for all of you who answer...and I know some will say "search and find" but I've searched and found, but haven't understood.
Wrong place for this post, although there is no clear questions and answers section.
Trust me when I say the information is there.
Definitions:
RUU: Stock Operating System (ROM) that comes with your phone.
ROM: Phone Operating System.
SuperCID: Unlocks the device to allow flashing of non-stock and custom ROMs.
USPL: Allows you to temporary SuperCID your device to enable flashing using a Flash Center Utility in Windows. You cannot use LZX compressed ROMs, and you cannot flash ROMs requiring an SD Card.
HardSPL: Permanently (Well Almost) SuperCIDs your device to allow you to flash any ROM of any type, as long as it is a Herald/Wing ROM. You can flash using SD card, or through a Flash Center. I say it is almost permanent because it can be reversed.
However, for the sake of this, I assume you'd like the easiest and safest way. SO I will instruct you how to USPL your device to allow you to temporarily unlock it. Remember, you cannot use a LZX compressed ROM with this method, or ROM requiring an SD Card to flash.
First things first, you need to download the folder im going to provide you. Save the zip to your desktop and extract it. Now the fun begins.
1. Drag and extract the .nbh file you downloaded from the ROM and place it inside the RUU folder located inside of the MyFirstRom folder.
2. Turn your phone to flight mode. You can do this in the Comm Manager found in your Connection Settings.
3. Next make sure your phone is connected to your computer and you have Activesync (Win XP) or Mobile Device Center (Vista or Windows 7) connected with a green light.
4. Execute the application Herald-USPL (located in the MyFirstRom folder).
5. Wait for it to verify, press Enter. Wait for it to load SPL, PDA screen will go white at about 70 percent. If it doesn't and it hangs on a tux logo with a little command prompt (on the phone, sometimes this happens.) don't worry and just reset and try again.
6.If everything is successful and the PDA screen is white, press Enter and it'll launch the RUU installer application on your computer.
7. Follow the instructions, Press the Update button when it asks you what ROM you are installing. It should show some version number. Press Next, and it'll start flashing. It will say it will take 10 minutes, it'll go faster than that. After it's finished, the PDA will automatically reset to the new RUU.
If you experience any problems, don't panic, Soft Reset your device by pushing the stylus into the small whole next to the volume slider. If the phone goes into an endless reset, don't panic... Hard reset your phone by pressing holding the two soft-keys (keys with lines located above the Windows key and Ok key) while pressing the sylus into the reset hole. Release the soft keys while still holding reset and then release the reset. It will come up with a screen telling you you are being set to factory settings, press the Send key. (Green phone key)
kanunez said:
So I want to flash my T-mobile wing, but I barely understand what flashing is. Can't understand your terminology, ......and even though I find some roms, none of them have specific instructions on how to do this.
Thanks in advance for all of you who answer...and I know some will say "search and find" but I've searched and found, but haven't understood.
Click to expand...
Click to collapse
Don't understand the terminology lear ? want to lear?
zcink said:
Don't understand the terminology lear ? want to lear?
Click to expand...
Click to collapse
Awfully harsh on typos aren't we?
apreichner said:
Wrong place for this post, although there is no clear questions and answers section.
Trust me when I say the information is there.
Definitions:
RUU: Stock Operating System (ROM) that comes with your phone.
ROM: Phone Operating System.
SuperCID: Unlocks the device to allow flashing of non-stock and custom ROMs.
USPL: Allows you to temporary SuperCID your device to enable flashing using a Flash Center Utility in Windows. You cannot use LZX compressed ROMs, and you cannot flash ROMs requiring an SD Card.
HardSPL: Permanently (Well Almost) SuperCIDs your device to allow you to flash any ROM of any type, as long as it is a Herald/Wing ROM. You can flash using SD card, or through a Flash Center. I say it is almost permanent because it can be reversed.
However, for the sake of this, I assume you'd like the easiest and safest way. SO I will instruct you how to USPL your device to allow you to temporarily unlock it. Remember, you cannot use a LZX compressed ROM with this method, or ROM requiring an SD Card to flash.
First things first, you need to download the folder im going to provide you. Save the zip to your desktop and extract it. Now the fun begins.
1. Drag and extract the .nbh file you downloaded from the ROM and place it inside the RUU folder located inside of the MyFirstRom folder.
2. Turn your phone to flight mode. You can do this in the Comm Manager found in your Connection Settings.
3. Next make sure your phone is connected to your computer and you have Activesync (Win XP) or Mobile Device Center (Vista or Windows 7) connected with a green light.
4. Execute the application Herald-USPL (located in the MyFirstRom folder).
5. Wait for it to verify, press Enter. Wait for it to load SPL, PDA screen will go white at about 70 percent. If it doesn't and it hangs on a tux logo with a little command prompt (on the phone, sometimes this happens.) don't worry and just reset and try again.
6.If everything is successful and the PDA screen is white, press Enter and it'll launch the RUU installer application on your computer.
7. Follow the instructions, Press the Update button when it asks you what ROM you are installing. It should show some version number. Press Next, and it'll start flashing. It will say it will take 10 minutes, it'll go faster than that. After it's finished, the PDA will automatically reset to the new RUU.
If you experience any problems, don't panic, Soft Reset your device by pushing the stylus into the small whole next to the volume slider. If the phone goes into an endless reset, don't panic... Hard reset your phone by pressing holding the two soft-keys (keys with lines located above the Windows key and Ok key) while pressing the sylus into the reset hole. Release the soft keys while still holding reset and then release the reset. It will come up with a screen telling you you are being set to factory settings, press the Send key. (Green phone key)
Click to expand...
Click to collapse
Thanks a lot...I'll give it a try in a few minutes...
it never ceases to amaze me the things people ruch in to the get surpised when it doesnt work right they want someone to jump up and help them that second. was so worried i was gona break my new toy it took me weaks to think i knew enuff to not just do it but fix it to and still was nervios. it not something you should rush in to. why would u want too not only will your phone be better but its not half great as learning this stuff i feal like ive failed if i gota ask something like i did today anyway. good luck
This always kills me, if the kids dont know how do wat their asking then why are atempting it?. Then they come back crying that their phone is stuck on a red blue green screen! If u dont know wat it is dont attempt it. But if you must know, In simple terms, !!!HERES WHAT YOU NEED!!!
*TMOBILE WING*
*CUSTOM ROM*
*MY FIRST ROM FOLDER*
*PUT CUSTOM ROM INTO RUU FOLDER "INSIDE" MYFIRSTROM FOLDER*
*GO BACK AND LAUNCH HERALD UPDATE PROGRAM
COMPUTER*
*ACTIVESYNCE*
*USB CABLE*
*THE ORIGINAL TMO/HERALD OEM ROM*
Read everything! its the only way you'll find out.
well if you take out all the drunkin ramblings that some hoe get in all my posts. thats what i said. thx good translation. usualy i make a post the thread ends .
Bricked Herald (Dopod C800)
Hello,
Tried the MyFirstRom and bricked my C800
Steps
====
1. Started the herald-uspl.exe
2. DOS prompt came up
3. Step 1 in the window went fine
4. Step 2 went fine.
4. Step 3 went corrupt and
NOW:
====
1. Cannot do a factory reset. The device says, format failed
2. Will not go beyond green screen and show IPL/SPL versions
How can I revive the set? Am I dead for ever?
budikspam said:
Hello,
Tried the MyFirstRom and bricked my C800
Steps
====
1. Started the herald-uspl.exe
2. DOS prompt came up
3. Step 1 in the window went fine
4. Step 2 went fine.
4. Step 3 went corrupt and
NOW:
====
1. Cannot do a factory reset. The device says, format failed
2. Will not go beyond green screen and show IPL/SPL versions
How can I revive the set? Am I dead for ever?
Click to expand...
Click to collapse
Reinstall your phone's factory ROM. (It needs to be the factory, since you didn't hardSPL, you can only flash signed ROMs from the SPL screen.)