Related
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
i think there is something with the connections or something like that
if it happened every short-time try to turn on flight mode, then check if it gone will be sure it is something with connection/phone
Click to expand...
Click to collapse
I had this problem with the 1413 build, but not since going to the new 318 setup.
mattk_r said:
I had this problem with the 1413 build, but not since going to the new 318 setup.
Click to expand...
Click to collapse
Where I can download it from???
Hikari said:
Where I can download it from???
Click to expand...
Click to collapse
there many roms now build on 318
have a look and you will see
its right said:
there many roms now build on 318
have a look and you will see
Click to expand...
Click to collapse
Hmmm but my rom is 5.2.318 (build 15341.4.0.01)
I tracked that down as being a problem with radio signal strength. Every time the radio signal strength changed it would wake up the phone. That was annoying, but I never found a fix for it since I upgraded to a different to a different ROM that doesn't have that problem. It may have been a problem caused by BatteryStatus's signal strength monitor though rather than the ROM's because it didn't start until I installed BS if I remeber right.
just lock the phone
before put the wizard in sleep mode. then it doesn't wake up when you dont neeD it
Hikari said:
Hello,
I have Wizard + WM6 (faria) and recently I noticed that my PDA turns on without any good reason. Previously the display turned on when I received SMS or when there was an incoming call. Needless to say it drives me crazy!!!
Is there any way to investigate the issue (find a reason for this strange behavior)? Pls help.
P.S. Locking the device is not a solution.
Click to expand...
Click to collapse
don't use a windows mobile password in WM6 (start -> settings -> lock). for mee it makes the phone wake up often. if I remove the password it doesnt wake up automaticly any more
hmm
maybe theres a ghost inside your wizard loll
I had a ghost in my wizard once, had it exorcised, and then it moved into my car. Now my car starts on its own!
Indeed I have a password. Furthermore I noticed that at the outset (WM6 + all software I'm using) the problem didn't exist at all. I think that it started after hard reset + system restore (spb backup).
I did some hard reset, but unfortunately the problem still exist (at least I think so, but today I will check it more thoroughly) HELP!
Here's what I would do if I wanted to keep my current rom - assuming it didn't have this behavior before (I've been known to be excessive at times ):
Back up your phone with something like PIM Backup or whatever you prefer - don't forget your themes, pictures, whatever.
Do a hard-reset.
Test for this symptom before installing any applications.
If the symptoms exist, try a different radio, if not, install BatteryStatus and test again.
Continue until you find the culprit.
Might take a while, but you should be able to find the issue...
its right said:
i noticed that before and solved but i cant remember where is the problem exactly.
Click to expand...
Click to collapse
I don't need to know the reason - I just need a solution?
BTW which one is the best WM6 ROM for wizard now?
The problem lies on having a both a password set and backlight settings on. Either remove the password or turn off the "turn off backlight if device unused for..." setting. It solved the problem for me!
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Hikari said:
You're right, but unfortunately I need the password :/
This weekend I switched to NBD 7.2 and the problem still exist.
Click to expand...
Click to collapse
If you need a password, then you'll have to go back to WM5. If you just want a password because you want to protect some files, then you should look into encrypting those files.
I hope that there is some way/there will be some rom to support device lock for Wizard's WM6
some WM6 roms seem to work with password.
I am still on a 'old' rom Wizard Reloaded 1.5 and there I can enable the password without waking up problems.
Just try with any rom, if it wakes up, remove the password. I suppose that's not such a big problem for most of us...you can still use Mobile Justice
I hope someone will find the exact cause (regkey probably) of this waking up problem, so any further roms wont have the problem anymore...
Hello out there,
since WM6 is available for my Qtek 8310 I would like to update to WM6.
After a short look here in the board, I see a couple of threads "Release WM6 .... "...
My question now is; Which release I should take? In other words, which one is the "best" ?
Thanks in advance,
Kesa
You should consider these 2
Andot PEE or HTC Edition
Basically HTC Edition is based on Andot PEE with some HTC themes and stuffs only
please apologize my bad english
So the HTC Edition has more stuff ? this one ?http://forum.xda-developers.com/showthread.php?t=321408
If yes... there's written under "removed" "office mobile" and so on... but what if I want office mobile or for instance the windows wireless manager ?
office mobile is removed coz you can install it yourself via the cab file into the storage card, saving up space on your main memory, same applies to the remove stuffs
okey understood
Well... If I take the Andot PEE version, I can install by myself the apps I want? - and install the HTC Version's apps too ?
[GUIDE] Upgrading HTC Tornado to Windows Mobile 6
Karhoe's guide to convert a Tornado to WM6 can be found at :
http://karhoe.byethost33.com/index.php?option=com_content&task=view&id=21
I used this wonderful guide to convert my T-Mobile SDA to WM6 last week and it worked like a champ. Everything went well. I had two minor hick-ups that I was able to resolve with research on this web site. As Karhoe pointed out the Office cab files are included in the "Extras" donwloaded and used at the end of the upgrade process. I'm very pleased with the WM6 upgrade.
Everything seemed to have gone well using andot's WM6 PEE, but after a few hours, my backlight on my phone starts behaving badly. I set the backlight to turn off after 30 seconds, but it will just basically turn itself off after about 5-6 seconds without any type of dimming before turning off.
If I go back to power management and set the backlight time to something else, that setting will stick for about a few hours, and back to the same backlight problems mentioned above.
Anyone else have this? I followed karhoe's tutorial exactly, and everything works well besides the backlight issue.
Thanks.
nemesis202 said:
Everything seemed to have gone well using andot's WM6 PEE, but after a few hours, my backlight on my phone starts behaving badly. I set the backlight to turn off after 30 seconds, but it will just basically turn itself off after about 5-6 seconds without any type of dimming before turning off.
If I go back to power management and set the backlight time to something else, that setting will stick for about a few hours, and back to the same backlight problems mentioned above.
Anyone else have this? I followed karhoe's tutorial exactly, and everything works well besides the backlight issue.
Thanks.
Click to expand...
Click to collapse
Just Perform a Hard Reset and everything will be a treat
sugardad said:
Just Perform a Hard Reset and everything will be a treat
Click to expand...
Click to collapse
I think he is talking about this problem here
Follow the link for the resolution to your problem.
Exitao said:
I think he is talking about this problem here
Follow the link for the resolution to your problem.
Click to expand...
Click to collapse
Exitao, thank you very much. That was exactly the problem I was having and the registry edit seemed to have fixed it.
Rom WM6.5 1.11.456.21 WWE Pharos v24
CE OS 2.5.707.1 Core 23003
Cr. : Phamquang
http://www.pdaviet.net
Download Link:
http://rs153.rapidshare.com/files/295530585/PHAROS_WM65_2_5_707_24_B23071COM3_20OCT2009.rar
Password : PhamQuang
Cheers
looks really nice!
Tihiti rom have little bug, when u send sms,rom send lots same sms. Can you fix that?
I fix problem,hard reset and now rom work fine. Problem is sms threader.
Problem:
I charged my phone all yesterday evening (probably around 5-6 hours). So the battery was 100%.
5 minutes later I cheched my phone: 31% battery
1 minute later: 9% battery
It stayed on 9% a while, and descended from 9 in the normal way. Ran out of battery this morning, and the phone shut down.
Before I put the phone in the charger yesterday evening , it was at 9%. So it seems that it thinks that it charged, but no current was add to the battery. So when i pull it out from the charger, it thinks that the battery is 100%, but is only in fact 9%.
Maybe my battery is failing. Never had this problem before.
The phone is ON now, and in the charger. Will update post.
Charging by USB from computer.
EDIT1: about the ROM: Really nice! Like it very much! Fast and somewhat stable
EDIT2:
Phone was charged 91% a couple of hours ago, disconnected the phone. Its still on 91%, so I think the problem is gone... Probably a user error the first time
EDIT3: After charging the phone to 91% (as mentioned before), it stayed on 91% for an abnormal long time. I rebooted the phone, and after the reboot, I had 96% battery...
TouchFLO 3D issue!
I tried to install TouchFLO 3D [ HTC_Manila.cab ] and selected it in Today.
But after reset it flashed on the screen as "Tap here to start TouchFLO 3D ..."
But after taping it hangs the phone sometimes or the application does not respond and must be reset.
Does the Pharos not support TouchFLO 3D or have i tried wrong TouchFLO 3D version.
Is it the Dimond which has got the power to use this app? Does the pharos capable of running TouchFLO 3D?
Coincidently even i faced the Battery issue as mentioned above after recharging to 100% and after disconnecting the battery came down to 87%
Will this work on the Pharos Traveler 127? I've noticed in looking for ROM updates, specifically WM6.5, I keep finding references to Pharos in general but no specific model numbers as I understand them.
Thanks for this! I have been using this for 2 days now and haven't got any problem at all so far. It's also pretty fast. Boots up fast and was faster than my old rom which was Poldo v12.
I'm running this ROM now.. i like it No problems so far! Only thing is, that my hotmail settings fail, i think it's a hotmail problem..
I'll report problems in a few days!
juustjuust said:
I'm running this ROM now.. i like it No problems so far! Only thing is, that my hotmail settings fail, i think it's a hotmail problem..
I'll report problems in a few days!
Click to expand...
Click to collapse
Use the cab below for surve your problem.
Cheers
OK, i'll try!
Pharos 117
Hello everybody!
I am novice in pharos device
Anyone knows if this rom is compatible with Pharos 117?
Thx
Erick
The windows live update works fine! I installed the dutch version without messenger, so this one's a lot better
Thanx for the work!
This rom works great for me so far, and surely the best one yet. The memory usage seems slightly lower than any of the 6.1 roms I've tried, and I really like the newer windows menu which is superb when you get used to it.
Only real negative issue is that the bootup from cold is very slow, but because like most users I assume I rarely turn it off it's not a major problem.
I can't see myself going back to a 6.1 rom now, 6.5 is so much nicer...
USB to PC
everything works fine with me also...except for the USB to PC whenever you set it pop up screen will come with this message...:This feature needs a memory card in your device. Please insert first before using this feature."
thank. I'll try tonight.
erickwill said:
Hello everybody!
I am novice in pharos device
Anyone knows if this rom is compatible with Pharos 117?
Thx
Erick
Click to expand...
Click to collapse
I'm not sure your Pharos 117. I know P3470 is Pharos from HTC.
Cheers
hi...
i need help..
Problem..... After i Up rom and restart. Rom it show
" MortScript V 4.3b5
.mscr and .mortrun Extensions Rejistered Please Run any .mscr/ .mortrun File or read the manual." what is mean?? what shall i do. pls help me.
zhoung said:
hi...
i need help..
Problem..... After i Up rom and restart. Rom it show
" MortScript V 4.3b5
.mscr and .mortrun Extensions Rejistered Please Run any .mscr/ .mortrun File or read the manual." what is mean?? what shall i do. pls help me.
Click to expand...
Click to collapse
o.k. i have answer From web pdamobiz. I delete MortScript in Window/startup
and restart. end. rom not show msg again.
I'm going back to 6.1. The battery drains.. i need recharge every day, while my battery isn't weak.
I randomly don't get notifications when i get new mails, so i don't really trust my phone anymore!
For the rest.. the rom runned smooth, but my mail is very important for me
Me too. I have problem same you.
Hi,
my vox turns off (completely off, not only display) automatically since yesterday.
Description:
I can switch on my phone, enter SimPIN an can normally use it. As long as i use the vox it stays on.
If i put on the keylock and let the vox untouched for a few minutes, it switches completely off.
The only change i did yesterday was playing around with Navigon Mobile Navigator, FakeCursor and Bluetooth.
I already deinstalled the applications i added yesterday, but same problem.
I also tried a second battery, same problem.
Has anybody an idea or is there like a log on vox, where i can see what causes the shutdown ?
OS: WM 6.5 from Fr. Hottelmann, worked fine for month until yesterday ...
Thanks in advance
Alex
Mh, sounds strange. It usually is a battery problem. Maybe try a hard reset or reflash (maybe also try a different ROM, although I doubt that it is my ROM since this didn't happen to anybody else...yet).
BTW: I have two batteries that don't work correctly, I just ordered a new one.
Hi Fhm, thanks for your reply. A hardreset worked. It seems that Navigon Mobile Navigator 7 combined with the usage of BT Gps causes this problem. Thanks, great forum Alex
Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM
to ensure, see your wifi's power save mode. go to comm manager, press settings at bottom right and choose wifi. under power save tab try avoid adjusting to best battery. see if it solves your problem. if not u might having a faulty wifi kaiser. im using 6.5 so i might slightly different than yours. hope this help good luck
adamekkp said:
Hello everyone, im new here also im new user of this big machine -Tytn II
From begining my jurney with it i notices that My wifi dont work, on settings i see option to run WIFI, but when i try Start it on commmgr its trying but its go back to off mode.
I tryied put upgrade on my 6.1 WM but its still the same, later i tryied use some registry tweaks but the same.
Ive serched whole internet for solution of it, PLEASE help me.. im loosing my hope ;/
Hope that i poste it on good place.
Sorry for mess, cant wait for answers!
Regards ADAM
Click to expand...
Click to collapse
Install an official HTC ROM. Then disable power save in wifi settings. Turn wifi on and try scanning for networks.
Try changing Radio version as well. I recommend 1.65 or higher
Ok, ive been changing power mode before. after playing with registry i cant go to advanced options of wifi.. only white screen.
Can i have download url? and in shortlist what to do step by step. Beocuse i dont want to mess it again ;/
BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?
adamekkp said:
BUMP
also got problems with batteries, gone sleep with 50% and after 7 hours, i heard alarm and phone fall down. - new soft can fix it ? or its just battery?
Click to expand...
Click to collapse
The problem is that Kaiser uses 3G which uses lots of energy. In WM 6.5 there's option in Comm Manager to turn off 3G (I can't find anything similar in WM 6.1). The internet connection will be slower, but the battery performance will slightly increase.
help me guys, i cant run setup when i use D-pad.
I want to instal android to check wifi etc.
can i have Yours solution ;/
ive instaled android hero from sdcard. but wifi still not working, the same with bt, when on WM bt was working, dunno maybe wifi is hardware problem ;/
Have you checked the rear panel of the phone where the antenna is?
check the pins they could be bent of broken off
Just a thought
They'r looking good