Disconnect Bluetooth after call - General Topics

Hello,
I searched for a program that disconnects a BT device, such as carkit or headset, when a call is finished.
With disconnecting I mean that the device is not connected anymore at that moment.
So when I have an incoming phonecall, I have to push to connect my BT device to my phone. Then I can pick up the phone with my device.
Who knows were I can find this?
Thanks,
Temba

Related

Bluetooth HF disconnecting during a call, although BT stays on

Please help! I tried to search for an answer to my problem, but while it seems there have been issues aplenty with WM and BT, I couldn't find a similar case.
So, how it goes: I have my Sony Ericsson HBH-DS980 Bluetooth stereo headset connected to my TP, when I receive a call. I pick up the call with the headset, and everything goes smoothly for a couple of minutes, but then suddenly I can't hear anything from the earplugs. I check the phone, and it shows that BT is on, but doesn't have the icon indicating that a headset is connected. I check my headset, and it's powered up. The call has been transferred to the phone. I restart my headset, and the TP discovers the headset, after which I can redirect the call to the headset. After a few minutes it all happens again!
It's extremely frustrating! Can anyone help, please?
I'm using standard 1.90.401.1 WWE ROM.
aBE-One said:
Please help! I tried to search for an answer to my problem, but while it seems there have been issues aplenty with WM and BT, I couldn't find a similar case.
So, how it goes: I have my Sony Ericsson HBH-DS980 Bluetooth stereo headset connected to my TP, when I receive a call. I pick up the call with the headset, and everything goes smoothly for a couple of minutes, but then suddenly I can't hear anything from the earplugs. I check the phone, and it shows that BT is on, but doesn't have the icon indicating that a headset is connected. I check my headset, and it's powered up. The call has been transferred to the phone. I restart my headset, and the TP discovers the headset, after which I can redirect the call to the headset. After a few minutes it all happens again!
It's extremely frustrating! Can anyone help, please?
I'm using standard 1.90.401.1 WWE ROM.
Click to expand...
Click to collapse
today i jus encounter this prob a few times,,,i didnt restart bt...i jus like it rest a while then thne icon indicated headset is connected then i clck transfer again

Connecting to bluetooth headset with touch pro

i put the headset into pairing mode and I am able to find the headset but dont have any way to connect to the headset it just sits as a device in the bluetooth settings.
i assumed it would bring a msg to connect to the device but it didnt.
am i doing something wrong?

A question about connect bt earphone when calling a ring

Hey, sometime I wanna connect my bluetooth earphone and shift to my bt device when calling a ring which operation that I can do on my old Nokia n70. But IT CANNOT BE DONE on my Diamond!!
It really kill me, please help me, thx!
detail info:
1) accept a call;
2) in that circumtance, try to connect bt earphone and switch signal to that device, but it can not be done
3)after ending this call, the bt earphone is connected.

BLuetooth Please!!!

Ok I am going to ask this question because there are way to many bluetooth programs here and I need to find a specific one.
All I want is for when I turn my headset on and its connected to my phone I want it to transfer the sounds to the headset and pull the microphone from the headset. So when its connected it immediately sends the sound to the headset; Not just in call sounds. I mean all sounds. I am using VITO VOice command so I just need it to send the sound to the headset and pull the microphone form the headset. Also I need it to send teh sound back to the headset after a call as well if a call is happening while using the headset for sound.
Can this be done?
try this
http://forum.xda-developers.com/attachment.php?attachmentid=30959&d=1161286247
Thanks nir36, I've just tried BTaudio but, unfortunately, it doesn't seem to reconnect the audio gateway after a call ends.
----
What I use is a program called BtMusic (available here: http://maxmobilesoft.com/index.php/software/btmusic). It is shareware, I think, but does pop up a message box when opening the program and every 5 or so times the gateway is established. I believe you can donate to get rid of these prompts, but you'd have to ask the author through that website. It isn't annoying if you don't need to keep reconnecting very often. BtMusic seems to have some advantages:
1. Reconnects automatically after a call ends.
2. Does not need the headset to be turned on before being enabled - it waits for the headset to connect and connects the gateway when it is found (you can therefore leave BtMusic running in the background and just turn on and off the headset as needed!).
3. Supports stereo headsets.
All the best,
Martin
Anybody have any other ideas?

bluetooth question

Hello,
I am having an issue with BT connection- I do not want take calls via BT on the watch but I still want to receive notifications (via BT). I connect to BT normally, and I go to settings, BT, and unselect "call audio" because I have a headset I use, but the watch disconnects completely from BT and the watch is now in standalone mode and does not receive notifications. So, how can I be connected to BT but NOT take calls on the watch? Any ideas?
I have my watch and my plantronics bluetooth paired to my S7 and what I do is when I get a call is see who calls me on the watch then I answer it with the my bluetooth. Only thing that kind of suck is when I have call waiting and it doesn't show on the watch.
Does it ever show call waiting if you're connected via bluetooth?
It doesn't show on the watch but you will hear a beep tone on the Bluetooth headset. Well at least on my Bluetooth it does.
CAn you connect the watch over wifi to the phone? Tot est, turn off bluetooth on the watch and see if it will connect via wifi - this might solve the issue

Categories

Resources