Related
Anyone knows how to remove this black banner
When i type a recipientname i only get one name and this black banner
also with the message i type
disable xt9 and word suggestion
I did disabled the word completion, bud where to complete disable te xt9 ?
input methode => touch keyboard => i remove the checkbox there
Weird thing is, it doesn't show up every time you use the keyboard. In one screen it does and in the other screen it doesn't (or I'm blind).
The settings you changed should work I think.. lemme see:
start -> settings -> input -> *select 'Touch keyboard' from list* -> options -> XT9 settings.
In the XT9 settings you can turn off word completion etc.
However, I'm not sure if that also turns it off for the normal keyboard. I would assume it does, but you know what they say about assumptions eh
After this regtweak
HKLM\SOFTWARE\Tegic\eT9\
and change the key "XT9SupportMSSip" from value "1" to "0"
The black banner bellow is gone for keyboard input, the input sms recipients its still there and have only one name instead of the hole list with email names.
Try this. Will Disable xt9
Works great thanks
I have exactly the opposite problem - Word Completion doesn't work at all even though I set ip up several times in the "Input" menu (in "Settings").
Any suggestions??
Thanks.
John_A said:
Try this. Will Disable xt9
Click to expand...
Click to collapse
Hi Im new here... been wanting to disable the XT9 input from htc touch. Will the attached above work on htc touch 2nd gen? thanks!
Blackfire said:
After this regtweak
HKLM\SOFTWARE\Tegic\eT9\
and change the key "XT9SupportMSSip" from value "1" to "0"
The black banner bellow is gone for keyboard input, the input sms recipients its still there and have only one name instead of the hole list with email names.
Click to expand...
Click to collapse
Does that also disable T9 for the Touch Keyboard and Keypad?
Hi, I tried this CAB file and it works for the DUAL. May be you guys can give it a try. I got it from the HTC website. Good Luck!
Hi, I've also been irritated by the new XT9 on my HTC Touch Cruise. I have managed to stop the XT9 black bar coming up when using the standard jeyboard, but how do I get the original windows word suggestion to come back up? I have become very fast at using the windows word suggestion on my old HTC Artemis and like how it suggests a word but does not replace the one you're typing before you click on the suggestion.
Swidge said:
Hi, I've also been irritated by the new XT9 on my HTC Touch Cruise. I have managed to stop the XT9 black bar coming up when using the standard jeyboard, but how do I get the original windows word suggestion to come back up? I have become very fast at using the windows word suggestion on my old HTC Artemis and like how it suggests a word but does not replace the one you're typing before you click on the suggestion.
Click to expand...
Click to collapse
I would like to know this aswell, I become very fond of this on my Orbit 1 (artemis) and liked that it learned words that you used frequently.
Exactly, I had the Orbit 1 and have now upgraded to the Orbit 2. The way it learned words was great, but it didn't interfere with what you were typing. I'd rather it assumed I was correct and let me choose when to go with it's suggestion.
Ah ha! I have managed to rid myself of the XT9 and get the nice old native pocket pc word suggestion back!
I installed PocketCM Keyboard. That's it.
As I was typing on the new keybaord I noticed word suggestions coming up as well as the PocketCM Keyboard suggestions. I then swithced back to the standard keybaord and the classic word suggestion was back! I went into word suggestion options and changed it to my favourite settings and hey presto, it's working as good as the old one was. It also gives me the nice standard list of contacts when typing a name into my SMS 'to' field. Fantastic.
I don't know if it was a fluke or if it would happen every time you install PocketCM Keyboard, try it out. I don't know if you can get the XT9 back though, and the XT9 doesn't work for the touch keyaord and keypad now either rendering them practically useless, so be warned.
I also haven't reset the phone since this discovery so i don't know if it's permanent, but, crossed fingers...
Swidge
Blackfire said:
When i type a recipientname i only get one name and this black banner
Click to expand...
Click to collapse
You can scroll through the available recipients at this time by using the scroll wheel.
How I can completely swich off Touch keyboard and Touch keypad?
Henry100 said:
How I can completely swich off Touch keyboard and Touch keypad?
Click to expand...
Click to collapse
I don't know of any way to switch off the touch keybaord and keypad, but you can switch to another keyboard easily enough. If it's the black bar with predictive text in it you can switch it off pressing the XT9/ABC button on the touch keyboard, then using the keyboard of your choice. However this does not replace the XT9 predictive tet with the old style word prediction. The only way I found to do that was to install PCM Keyboard. I don't know why that reactivated the old style word prediction but it did.
Also, in addition to my previous post, i have reset my phone a number of times and the old style word predition has stayed. It seems to be a permanent solution, even if i don't know why it works.
I hope that helped.
Swidge
Thanks Swidge. You are awesome!
noooo....
i have the reverse matter
i want to display that black banner....but the version of HTC Keypad+Keyboard I've installed won't do that....
arggggg...
someone can suggest me an htc keypad+keyboard cab with this black banner???
plese i need it
Hi there,
here's a question relating to the soft-keyboard:
I noticed that with some applications (e.g. PHM reg editor) when I want to punch in a value and hit the corresponding field the keyboard will pop up (which is perfect so far). Now, the keyboard sometimes hides the OK button which I'd have to hit to accept the changes but somehow I can't convince the keyboard to go back where it came from - there's no button to disable or change it (like the "12" button you sometimes see in the bottom).
What can I do to get rid of the keyboard in such situations? Is there maybe a hardware button??
Thanks a lot
There's an icon between the soft keys on the bottom of the screen that changes according to the desired input method. Touch that and a keyboard will magically disappear, regardless of the selected input method.
The input method icon, is always displayed when there's a possibility for text input.
ps.: RTM
gnick666 said:
There's an icon between the soft keys on the bottom of the screen that changes according to the desired input method. Touch that and a keyboard will magically disappear...
ps.: RTM
Click to expand...
Click to collapse
Read the manual and like I said:
There's NO icon displayed at the bottom of the screen!
Then use another program, that's the best workaround that i can come up whith..
Or there's the possibilty of a greater underlying problem that would need a Hard Reset to fix it... so far you're the first whith this problem...
Indeed, I've had this too before, try using WM6 compatbile software, I though that was my problem a few weeks ago. An example is Mozilla Minimo, which is horrible on WM6, not being able to remove the keyboard, or even better, hiding it, but not refreshing the contents behind the keyboard
SabbeRubbish said:
Indeed, I've had this too before, try using WM6 compatbile software, I though that was my problem a few weeks ago. An example is Mozilla Minimo, which is horrible on WM6, not being able to remove the keyboard, or even better, hiding it, but not refreshing the contents behind the keyboard
Click to expand...
Click to collapse
Exactly, Minimo is another one of those applications that show this problem.
How about changing your default kb to something else?
There is a reg hack to disable the SIP from displaying when you put focus on any text field, but that is not a good solution for a device that doesn't have a physical kb. I use it on my Treo 750 since I don't need the SIP. However, on the TC, it would make much sense.
On a bit of a side note, I have heard that if TC owners want to use another kb besides the standard Xt9 version, you need to apply the following to disable it:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
Did your registry tweaks will stop pop up of any keyboard when accessing a text area?
That's what I 'm looking for. Because I installed a full screen keyboard and I use it with a button.
Thxs.
up!!!
Pleaaaaase'!
This app will keep the keyboard from poping up automatically. You can still open it manually. I've not tried it with WM6.
http://www.freewareppc.com/utilities/nullkeyboard.shtml
Thanks a lot!
It works!
what full screen keyboard are you using?
I use SPB full keyboard.
Hello everybody,
First off, SUPER FORUM! yes, you guessed it, i'm new.
To be honest, I would never have dreamt of working with a HTC Touch Pro, since i own an iPhone, but recently i was given a free HTC, so here I am.
Why I make this thread, it's the touch keypad that keeps on poppin up, even when I say that primary keys are the full button slide keyboard.
Is there a reg key that I can edit to disable the keyboard, or at least have it kept hidden in the task bar?
thanks in advance!
Yes, I find this too, but the more annoying thing for me is when composing emails and it keeps suggesting words and changing them even though I've deselected autocorrect and suggest words! It would be nice to be able to disable the on-screen keyboard completely and also the word suggestion/correction.
Of course in Opera you can't over-ride the on-screen keyboard anyway...
there was another thread about this - no solution found yet
(although I suspect the idea is simple: when keyboard is detected open, change SIP to an empty one, that has nothing to pop out - because it will be much more difficult to PREVENT OS from popping it)
For now just ignore it, it disappears when you click the first physical button anyway.
comclusive said:
Yes, I find this too, but the more annoying thing for me is when composing emails and it keeps suggesting words and changing them even though I've deselected autocorrect and suggest words! It would be nice to be able to disable the on-screen keyboard completely and also the word suggestion/correction.
Of course in Opera you can't over-ride the on-screen keyboard anyway...
Click to expand...
Click to collapse
disable "T9" and change it to "ABC", that would disable the annoying auto word replacement feature
NLS said:
there was another thread about this - no solution found yet
(although I suspect the idea is simple: when keyboard is detected open, change SIP to an empty one, that has nothing to pop out - because it will be much more difficult to PREVENT OS from popping it)
For now just ignore it, it disappears when you click the first physical button anyway.
Click to expand...
Click to collapse
What about using that NullKB application that everyone has on their Moguls for precisely the same purpose?
~os
I suspect it will be fine (I'll check it out now).
The problem will be if keyboard is detected as open or not.
thx for the replies guys, too bad there's no real solution
comclusive said:
Yes, I find this too, but the more annoying thing for me is when composing emails and it keeps suggesting words and changing them even though I've deselected autocorrect and suggest words! It would be nice to be able to disable the on-screen keyboard completely and also the word suggestion/correction.
Of course in Opera you can't over-ride the on-screen keyboard anyway...
Click to expand...
Click to collapse
found this in another thread
changes for auto complete
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
suggest words in a drop down list as in WM6
Steve
s.morris said:
found this in another thread
changes for auto complete
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
suggest words in a drop down list as in WM6
Steve
Click to expand...
Click to collapse
Yay!! thanks!!
If you install the Advanced Conf you can disable it in the keyboard option.
s.morris said:
found this in another thread
changes for auto complete
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
suggest words in a drop down list as in WM6
Steve
Click to expand...
Click to collapse
I would seem that after this reg edit certain FN key stop working
i.e £ and € and in my case Sys
Steve
Would someone be kind enough to let me know how to restore the inputs and what's your registry settings for this two keys as I've tried restoring it but to no avail.
If you didnt notice, it screws up your Compact and Full Qwerty keyboard input.
I've got the same problem as Comclusive.
When I am typing email or word docs, this auto-correct keeps
locking in on words and I cannot get the cursor off the word. Then it seems to copy that word in the next spot I move the cursor to. It is maddening.
I've shut auto correct and chosen not to suggest words, in as many places as I can find, but my TP just keeps telling me to **** off - it is going to auto-correct and suggest words anyway.
I can't tell who is in Charge, Me or TP.
Help!
Joe_PDA said:
I've got the same problem as Comclusive.
When I am typing email or word docs, this auto-correct keeps
locking in on words and I cannot get the cursor off the word. Then it seems to copy that word in the next spot I move the cursor to. It is maddening.
I've shut auto correct and chosen not to suggest words, in as many places as I can find, but my TP just keeps telling me to **** off - it is going to auto-correct and suggest words anyway.
I can't tell who is in Charge, Me or TP.
Help!
Click to expand...
Click to collapse
SIMPLE SOLUTION:
Upgrade your ROM with this one.
http://forum.xda-developers.com/showthread.php?t=444653
It totally solved my problem AND radically improves the GPS.
Sweet!
i have another anoying thing with my TP
in portrait mode in opera if the soft keyboard pops up, it changes from the HTC Full keyboard layout to simple qwerty (small) keyboard layout
verry anoying.
hnparedes said:
If you install the Advanced Conf you can disable it in the keyboard option.
Click to expand...
Click to collapse
This is what I did also. Works a treat!
no way to hidde the auto popup keyboard yet? it's so annoying
s.morris said:
found this in another thread
changes for auto complete
IMPORTANT: previously be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Simply change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e 0010409
Ime File : \windows\xt9ime.dll change to Ime File :\windows\compime.dll
and
Layout Text : XT9 IME change to Layout Text : COMP IME
And soft reset.
suggest words in a drop down list as in WM6
Steve
Click to expand...
Click to collapse
Yesssssssssssssss! That worked for me too, just got my Touch Pro 2 weeks ago and this issue was driving me crazy!!!!! Thanks!!!
Touch Pro 2 Suggest Words
I have done your registry edit, and it does work for suggested words and the on screen full qwerty keyboard works great for a while, then what happens is I get locked in phone keypad mode when I have full keyboard selected. I can do the smaller keyboard and the Transcriber etc, but when I select Full Qwerty, it keeps me locked in phone key pad. Have you heard of this happening? If I change back the Registry to removed the old suggested words, the problem goes away.
if u have Advanced Configurator or Diamond tweak or something like that (sorry forgot the name), they both have options to stop the touch keypad to automatically popup.
Hey everyone,
If I have Opera open on my HTC Touch Pro with the hardware keyboard slid out, it still shows the onscreen keyboard (and it's annoying having to keep closing it all the time). Any idea how to fix this?
I too would like to know the solution for this. I have a feeling that this is kind of a feature from Opera and can't be disabled but it's very annoying for users with hardware keyboard.
I have this issue on my kaiser too
Daniel1515 said:
Hey everyone,
If I have Opera open on my HTC Touch Pro with the hardware keyboard slid out, it still shows the onscreen keyboard (and it's annoying having to keep closing it all the time). Any idea how to fix this?
Click to expand...
Click to collapse
HKEY_CURRENT_USER\ControlPanel\Sip>:
Create or change DWORD TurnOffAutoDeploy from 0 to 1
Restart your device!
its a bug with opera...
Brendo said:
its a bug with opera...
Click to expand...
Click to collapse
Actually, it's not Opera. It's Raphael itself. HTC should have made it in such a way that if the keyboard is out, the SIP should not be displayed.
To prove that it is not Opera, try creating a new SMS. Do this in portrait mode first. Try hiding the SIP and change field (To or Message). You'll see that the SIP is displayed every time you change field. Now slide out the keyboard. Try changing field and you'll see that the SIP is also displayed.
As far as I understand (from another post somwhere on the forum) it's not technically a bug...
It's a requirement of Windows mobile that the SIP is deployed whenever text is entered into a field. Seems rather daft when you have a hardware keyboard on your phone though...
I've had that registry tweak above work for me, the same tweak is implemented in Advanced Config 3.3 as well. There's another fix that *should* work throughout Windows Mobile, for text fields.
It's called nullkb, and installs an option into the SIP menu that gives you a null keyboard option, and any attempt to bring up the SIP brings up nothing. I installed it, and it appeared to work, but after a reset, it defaulted back to the normal keybaord, so you have to select the null keyboard everytime you reset the device.
I'd love to find a way to simply disable auto deployment of the SIP in ALL circumstances. NullKB forces you to go into the SIP menu and select another keyboard should you want to use symbols, for example. The registry fix only seems to (sometimes) work for opera.
I just want the SIP to stay hidden until I want it, and a single click on the keyboard icon should bring the selected keyboard up.
I have no idea how to go around getting this working, I'm more of an end user than a developer...
e: there's also this reg key HKEY_CURRENT_USER\ControlPanel\Sip\AllowChange=1
Change that to 0 and it disables the SIP entirely. I'm thinking this fix and judicious use of PQzII (once I figure out how the hell to set it up...) to set up hardware keys for lots of symbols (where the hell is "\" on the keyboard? On a WM phone I would've thought a \ key would be mandatory...) might be the way forward, though it's a fair amount of work to get everything set up.
branko.savic said:
HKEY_CURRENT_USER\ControlPanel\Sip>:
Create or change DWORD TurnOffAutoDeploy from 0 to 1
Restart your device!
Click to expand...
Click to collapse
That doesn't work, at least not on my CDMA Touch Pro.
SquidgyB said:
e: there's also this reg key HKEY_CURRENT_USER\ControlPanel\Sip\AllowChange=1
Click to expand...
Click to collapse
Doesn't work on my CDMA Touch Pro That regedit makes the keyboard appear on screen all the time, with no way to minimize it.
it is a bug in opera...
it is well documented as one
you can see if you disable autodeploy of keybaord (use advanced config) and youll see it still appears in opera. the only work around is to download nullkb and select it as your input while using opera
I had the problem with nullkb that it wouldn't stay as the default SIP after a soft reset. Loading PQzII and setting a link to PQzII in the startup folder fixed this, as within PQzII you can select which SIP should be displayed in portrait *and* landscape individually.
This still means a couple of clicks to get a keyboard up in landscape for entering symbols, but if in portrait the SIP will display normally.
I still can't get the "\" to work properly through PQzII though... it displays odd characters whenever I enter it into any of the PQzII configuration options. I suspect \ is used extensively in the code or something, and this messes up what's going on inside PQzII.
Is it possible to change camera&phone from the bottom of the home screen to eg. wifi&phone?
emili000 said:
Is it possible to change camera&phone from the bottom of the home screen to eg. wifi&phone?
Click to expand...
Click to collapse
yes it is possible
Yes! I've used Advanced Configuration Tool v3.3.cab.
In advanced configuration you can select different applications to set in the bottom of the home screen.
Could you tell me where will I find it (which option should I choose)
Search here in XDA for "advanced configuration tool V3.3.cab" (thanks shape!) and install it!
Then U go in "User Interfaces"->menu->more setting->key mapping and here you can sett every programs you want assign to the sofkeys!
in order to not make another thread; where will I find "phone"? I've changed it by mistake, and now I can't switch it back.
If you use AdvancedConfig then, you can change the softkey by looking up the "phone" shortcut from the drop down list or you can just leave it blank & it will change it automatically to the default setting.
Maybe a little OT... But I read that .NET 3.5 needs to be installed. Can I simply download and install it or do i need to manually do register changes afterwards (read that I had to somewhere)?
Just install NetCF3.5 to your phone (Main Memory or Storage Card) does not matter, mine is running just fine from SD Card. Soft reset & it should run with no issues.
Continuing the OT:
The Netcf 3.5 is not replace automatically but we must change the values on the register.
HKey_Local_Machine -> Software -> Microsoft ->. NETCompactFramework
click on item 2.0.7045.00 and change the value from 1 to 0
click on item 3.5.7283.00 and change the value from 0 to 1
Close ... soft reset and you have the ROM with the NETCF 3.5!
ok, now I know. However it worked for me without having to change registry settings.
or use this progam, works on diamond 2 too..
Does anyone know how you might, in a similar vain, get Notes to appear on the home screen?
@marcelvanblankers:
doesnt work on my td2! after restart it seems like it does, as there actually are the replaced buttons being displayed, but when tf3d launches there are "phone" and "camera" back again.
That's BS.
I just installed NetCF 3.5 via .cab and Advanced Config worked, without any registry changes.
i was talking of the softkeymanager1_1_diamond_beta.ARM_WM5.cab
woelv said:
@marcelvanblankers:
doesnt work on my td2! after restart it seems like it does, as there actually are the replaced buttons being displayed, but when tf3d launches there are "phone" and "camera" back again.
Click to expand...
Click to collapse
you must check the checkbox in the program to change the keys when using TF3D....
one is for standard today, the other for TF3D..
greetz
that's exactly what i did. i just tried it again - same thing, no change.
I'm looking for a solution to replace the calendar by the tasks and notes in the home screen.
Does anyone knows how to do it?
Tks
woelv said:
that's exactly what i did. i just tried it again - same thing, no change.
Click to expand...
Click to collapse
change the keys in program, save settings then exit.
in TF3D switch a tab and switch back to homescreen.
now it will be changed, it works on my diamond2. in TF3d and in original today.
do you have .net 3.5 installed? i know i have.. don't know if it matters..
greetzz