I cant figure it out, I just installed the latest v. WM6 Rom (http://forum.xda-developers.com/showthread.php?t=297256)
Internet Sharing via Bluetooth works but... when i start my vpn either via ssl or ipsec (on laptop) NOGO. something is in between dont know what...so workaround:
Internet sharing via USB: the device tells me "connected", the new Network connection in control panel/xp tells me "connected" but there is no Internet connection. I try to ping 192.168.0.1 which it made gateway and this is not found. nothing nada. firewall off. nogo. repair. nogo.
*argh* I realize it are 2 different problem but in short: I can not connect as I usually did under the wm5 dialer (and I miss the status lights).
Anyone has a clue?
Hi !
I have the same problem with the same ROM. I didn't found any solution yet.
I didn't try Internet connection shring with Bluetooth. But your problem sounds as a proxy setting problem on your PDA connexion. You should take a look at those settings...
Let us know if you find anything.
edit :
Finally it's working, I re-installed ActiveSync 4.5 and now it's OK.
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working?
I reinstalled activesync, modded down to wm5, then again wm6 ...
and magic usb is working but...
My VPN connection on both BlueTooth or Usb is not working. I use the AT&T client to connect to our network but authentication fails with all vpn servers in the list.
That's a shame because this is really the only basic functionality i need to check my e-mail and stuff "on the road". Hmmm... down to WM5!
Unless someone has got VPN working? Heres my errorlog:
21:24:55.190 Logon request sent to VPN server 111.11.111.222...
21:24:55.190 Wait for asynchronous action to complete.
21:24:55.230 A VPN logon message 1 was received.
21:24:55.230 Accessing digital certificate...
21:25:00.818 A VPN logon message 2 was received.
21:25:00.818 Negotiating encryption keys with the VPN server (111.11.111.222)...
21:25:02.290 A VPN logon message 3 was received.
21:25:02.290 Authenticating with the VPN server (111.11.111.222)...
21:25:22.349 The VPN logon response was received.
21:25:22.349 The local address is 192.168.1.78.
21:25:22.349 Last login error set to 118.
21:25:22.349 'LogonToIPSecTunnelServer' failed.
21:25:22.349 FSM error in state 'AuthenticatingTunnel'.
21:25:22.349 !Error 118 No response from IPSEC terminator during authentication. (error 118).
21:25:22.349 ---------- Change state to 'BeforeTunneling'. ----------
ah... I have it... stupid me.
sorry. stupid. forgot the checkmark on the authentication tab on the auto-created controlpanel > networkconnections > Windows Mobile 6 Connection > Authentication.
Great!
For reference, using the Cisco VPN client, with Bluetooth and internet sharing, does not work. With WM6, a Bluetooth PAN adapter is created on the PC, and the Cisco VPN doesn't bind to this type of adapter.
Using the same config, but with the USB cable, and the wireless modem, does work.
Unfortunately It does NOT work anymore.
Whatever I try I can not get connection to the Internet
- I start "connect"
- Plugin the usb cable
- The new network connections icon appears under network connections
- It pops up it is connected
- It has an assigned 192.168.0.2
But no internet connection, ping 192.168.0.1 can not be reached, etc...
I turned off the firewall to see if this was the problem. not.
Is there ayone who has got a clue? This is really frustrating.
For what it's worth, I'm using WM6 Black 2.5 on a Hermes (Cing 8525) and I'm able to use WM6 Internet Sharing via BT to connect my laptop to the internet and I am able to use my Cisco VPN client on my laptop to connect to my company's intranet. No problems here so I don't think it's a WM6 problem.... rather a configuration problem... either on your company's VPN concentrator side or your client side.You may want to chat with your IT/Ops dept for configuration settings.
No problems here nither. I use Vista on PC. I need to connect to several networks and just have made some tests. I could reach all of them. The fact is that most of them are built on Draytek routers not Cisco, but they also use IPSec and so on.
Yep I'm having the same problem, my VPN's worked fine with WM5, but went to Black 2.5 and now when I VPN, it connects, assignes me an IP, but wont let me ping the network.
I _think_ it's becuase now the fone shows up as a network rather than a modem, and assigns me a 192.168.0.x address, and the home network is in this too... any suggestions?
share internet connection with ppc
Can i use my ppc as the wireless adapter? do i need to use "wireless modem" or "activesync" to do this? For more detail, if my computer do not have wireless adapter, and now i want to use the wireless adapter on my ppc to connect to the internet. Is it posible?
hi..i can connect to my linksys(in wifi tab)...however when i open internet eplorer, its automatically connecting to my gprs vodafone for connecting..how do i disable that and connect to internet on wifi..
dheerpat said:
hi..i can connect to my linksys(in wifi tab)...however when i open internet eplorer, its automatically connecting to my gprs vodafone for connecting..how do i disable that and connect to internet on wifi..
Click to expand...
Click to collapse
Ensure that you enable Wi-Fi in Comm Manager and, of course, configure your connection (WEP or WPA, MAC adress etc.).
Also check the router for broadcast channels... (b,g,b+g)...
The best option is b+g...
make sure you also turn the power up on the wifi connection..
Hi,
At my university they have WiFi in all the buildings.
I can connect to the modem without a problem, but to have acces to the internet I have to connect through VPN otherwise it won't let me browse the web.
So I go to Settings>connections>VPN and I put all the data in it like pptp,username,pass and server, I don't know what I have to chose for 'Make connection from (internet, work, mss, wap, ipaq wap)... and Make connection with(internet, work, mss, wap, ipaq wap)..."
My question is how can I activate that VPN setting?
I connect to wifi but there is no such thing as launching the vpn settings in it...
Plz help, thx!
grtz
I'm using CM7 stable (7.0.3) with a Nexus One.
When I enable the hotspot feature without having the phone connected to my openvpn server, my laptop (connected to the hotspot) connects to the web fine. The phone's internet connection works fine as well.
But when I enable the feature while connected to the openvpn server, even though the internet works on the phone, my laptop connects to the hotspot but cannot send/receive any data. I can ping my phone from my laptop, but pings go unanswered for example to google.com or 8.8.8.8...
Does anyone have any idea what's going on here, how I can troubleshoot or how I can fix the problem?
PS. I'd like to have the phone connected to my openvpn server rather than my laptop while using the hotspot as the laptop's openvpn connection is unstable when using the phone's hotspot (I do't know why).
Thanks!
I think the problem is the Gateway used by the laptop to connect to the internet. When you activate the hotspot the laptop will use to connect to the internet as gateway the ip provided by 3G. When you activate the VPN the gateway is changed but the laptop can't tell that and it uses the wrong IP address.
I have a GT-p3113 7.0 running 4.1.1 stock and rooted. I have been trying to connect to my laptops hotspot using wifi. I can create the connection and connect with an IP, however no shared internet. I used the CMD prompt to create the hostednetwork then share my lan connection.
> netsh wlan set hostednetwork mode=allow ssid="name of connection" key="password"
Share the connection from setting in the control panel then start it up.
>netsh wlan start hostednetwork
I can connect with an assigned IP but no internet.
So... while I am "connected" I used the USB reverse tether app with the tunnel local app and connect to the internet. and yes I can no connect to Gplay and download from most app sites with no problem because I do have an active wifi connection... just not using it to get to the site..
Can't use https , not sure why yet. or if it is even possible.
But I would like to be able to use my wifi connection if at all possible... does anyone know a way to do this? I do not want to use Conectify as it tells me to unistall my vzaccess ( I can't ) I have a 4g wireless card for my laptop. also tried virtual router, same thing.. connects, gets ip, but no internet. Has anybody been able to get around this? or do you think it is just my work network. I want to use this when I travel an am in a hotel but don't want to carry around another piece of hardware for a hotspot.
Thanks