Bluetooth Scanner with location of devices - General Topics

I am looking for a bluetooth scanner which shows location of the detected devices also preferably like a radar screen. I have been lookin up for this on different places but could not find right one... I need this urgently!!!!

Related

How to connect tomtom and bluetooth gps

Hi there, I have an XDA2 and a bluetooth gps reciever I bought off ebay.
I loaded tomtom software but do not know how to connect the gps to the tomtom software.
Please help step by step.
Cheers!
Please,,,, I really dont get it.
I have bonded them but then i go into tomtom and tell it I have a bluetooth reciever and it comes up with loads of things saying like com4, com5 etc...
Heya
First step is to pair the GPS and Phone. This is done in the usual way. Once you have set this up once you will only need to "start the device" in Bluetooth manager.
Second. Go into Tom Tom, which if its anything like mine, will take maybe 20seconds to start and appear to of done nothing.
Change Preferences->
Show GPS Device->
(assuming its not showing) Configure->
Select "Bluetooth GPS" by scrolling through the options
You will then be asked to select your "Bluetooth Serial Port...." This is where you will need to play a bit and get the right one. I only have two listed so it only took me a few minutes but, be patient with it .... it may take a minute or two to start pulling in data.
Hope this helps and good luck!
I also run TT5 and a Bluetooth GPS (GlobalSat BT388) and I can never get the damn things to sconnect using the Bluetooth setting.
This is the way I sorted it:
1) use Bluetooth Manager to 'discover' your BT device (the GPS)
2) Pair your Device in Bluetooth Manager.
3) Start TomTom (ideally updated to 5.1 or 5.21), select Prefs...GPS Device...Configure and select "Other Serial" and NOT Bluetooth.
4) now select the Bluetooth port (try com6 first, then com5 if offered, you should be able to spot the GPS in the list) I find 3800 baud speed works perfectly for me.
You know you've struck gold when the little wheel starts spinning (it helps to have got a lock with the GPS as this is set up) so if no joy after 15 seconds, select configure again & have another try with a different "Other Serial" port (there should be TWO BT serial ports in the list)
once this is set and it's receiving GPS info, click done and go back to the main Nav screen
Rest awhile & bask in the glory of now knowing yr position 8)
Finally, Exit the program in the normal way, give the PDA a couple of seconds, then start it up again, after it loads it WILL say "No GPS Device!" - DONT PANIC...after a short delay (10-30 seconds depending on the speed of yr device) it should automatically connect to the GPS)
Hope this helps - Joe
P.S. I have to turn my Bluetooth ON before starting TT5, as it doesnt seem to do this automatically like with my old FSC600, but I believe there are BT programs out there that can automatically do that, but seems a lot of extra stuff for what is, after all, two stylus taps from the Today screen! - JP
if you updat eto the lastest version then you can use other bluetooth if not id use other wired also if an xda2 and not an i then have a look at pocket bluetooth tool this will change the comport to com 7 if memory serves correct
Still wont connect, am clicking on all the comms......

at& fuse gps problem (not the lag/strength related kind)

ok so i bought an att fuse and like everyone here mentioned about hang ups, weak signal, etc i thought i would just use my old external bluetooth gps unit.
so breifly here is the problem, it works fine when i use a single application like google maps. but when i try to put the information in the external gps app (start>settings>external gps) i have my problem.
under the hardware section, it states:
Specify the hardware port to which your GPS device is connected.
i do so click ok and nothing.. so i go back in to see whats wrong and the gps hardware port resets its self to "none". its as if the settings never save or reset them selves. i know on my old phone (tytn) this would be somthing i considered unusual (so i am kinda familar with the mobile) os.
i am not sure if there is somthing wrong with my handheld or if at&t has some kind of block?
anyway i tried to use the forum search and really didnt turn up any information so any help would be great i really like this phone.
thanks in advance to anyone that can help.
I've never had those settings stick on any of my WinMo phones.
You don't need to use that to use a BT GPS puck anyway, you set the COM port in the Bluetooth settings.
It won't let you make a selection from that drop-down because the GPS hardware does not function by exposing a COM port as with standard hardware, it exposes a GPS0: port, that is picked up by the GPS ID, and exposed to the system as COM4:..
Now because the GPSID has been replaced by HTC's version of it, it's designed to work only with their internal GPS. If you want support for an external GPS in the GPS ID, you need to cook the stock Windows Mobile driver back into the ROM..
That being said, you don't need the GPSID unless you plan to have multiple programs connecting to the GPS at once, so you should be able to squeek by..
thanks guys i knew i would get a respoce here. unfortunatly i was hoping for a easy solution to use external gps with multiple apps i see unfortunatly its not possible without alot of work.
at any rate i am still very hapy with the device i was debating on upgrading from the tytn amd so glad i did =)

[Q] Android device cluster, networking or screen sharing

In short: Is it possible to cluster, network or push device output from one device to another, share storage devices and network/gps interfaces?
The long version: I have been wanting to build an in-car device that would store media and act as a gps and what not, but haven't found a way that I want to implement it yet. I was thinking if I found a x86 port of android, got most of the voice stuff working, I could have a headless device that I could store music on and use as navigation. I know the phones are capable of that, but if I want to keep say 500 gb of music on me, how does one do that?
My thoughts were if it were possible to either cluster or network an installed android powered unit to an android powered phone, I could always have network access from the unit in the car and share the gps from the phone, or have the phone access the storage from the device (not through dlna, but the music app seeing it as physical storage) and allow me to push the output from the in car device to the phone and let me interact with the system how ever I need to I could accomplish a form of in-car entertainment.
I figured that there could be apps written that would let the in-car device act as a headless unit, with its only interface being audio, it could store navigation directions/maps and what not, so if I didn't have the phone that day, I could still navigate to where I needed to. The phone and the device could constantly be in communication with each other if the car was parked by a wifi hotspot or something, so if I chose to navigate somewhere when I was at home, the car would already have the directions. I could also have it pull any media changes through wifi, and always have an updated media library.
I know the phones are fully capable of doing this, but for most of it, you have to have a window holster for the car to use the gps, and wires running for audio and charging and what not, but if there were a way that the in-car device could be hardwired to the audio system and left alone, the phone could stay in my pocked, be linked via bluetooth and I could have a small button-pad or something that would allow me to initiate google voice search, control the media player and interact with navigation. The whole thing with linking the phone and device together would be so the mobile network could be shared between android devices and the incar device could pull the information it needed. The thought of the display sharing was in case I needed to interact with the incar device.
I know what I am going on about is specific to me, but my thoughts behind it were if it were possible to do at least the network sharing (with out tethering or mobile hot spot blah blah blah) that android phone and tablet owners could do the same thing. They could share their mobile network through their tablet and have a tablet that would be always connected, would share mailboxes with the phone and basically act the way the Blackberry playbook is proposed or how the Palm Foleo was supposed to work. If the devices had a network ability of some level, the tablet could pull text messages, email messages, contacts or any other sync-able item.. That way, this wouldn't just be done for my benefit, but it would take tablet and phone owners to another league. Two devices that share the same information from one source and don't have to sync with the same servers twice. It would take a lot of redundancy out.
I hope you guys can see usefulness in my idea, and can shed some light for me.
Sorry from bringing this back from the dead, but since I never got any responses I'll add a bit more..
Does android have anything that would work like blackberry bridge between two android devices?
Droid Vnc server and androidvnc works fine for screen sharing. What I really like is the hpc aspects to CPU cycle sharing over wifi/nfc. Really interesting possibilities.
What I am looking for is to have the ability to use two separate android devices, but have them communicate via wifi/bluetooth or what ever and act as the same device in the sense that when the device with the data plan gets a text message or phone call, the notification goes through the other device that would be physically docked to audio equipment or what ever...
I have a Droid X, Droid Incredible, Droid Pro and a first gen Droid laying around.. Currently the Droid Pro is my in use phone.. The rest are just laying here. I want to be able to dock one of the others in my car, turn the GPS on, link it to my droid pro and have the other phone use the droid pro's active data connection for guidance/searches etc, and it would be docked to car audio, so it would need to access the pro's sd card, and have access to the pro's phone audio, or the ability to route calls from the pro to the other device via bluetooth or whatever, not by call forwarding.. This way it would be a sort of infotainment/telematics system..
Think of the possibilities this would open up for android tablets etc. If You could reply to text messages from your tablet because the tablet is linked/bridged to the phone in your pocket... That would make these tablet/laptop combos more appealing because it would the perfect convergence between tablet and phone.
Oh, and I guess, the other thing is that I have multiple cars, so one device would go in each car, and then when I got in the car, the one in that car would link with my phone, and everything would be the same, car to car, or device to device...
I guess another way to bump this:
Would it be possible for an app to do ADB to ADB via bluetooth or something, because then an app could be written like pdanet that would allow the network to be shared at least?
I dont remember the name of the app I think the name of it is Dashboard? and it will store/push all texts/emails etc. to every device u have dashboard installed on...Best buy has an app kinda like that too...Like the Idea of the screen sharing is that kinda like remote desktop/control?
I just search how to neywork cluster android came across your post ..... if you use the Google apps like Google play music/maps as well Google hangouts since with Google voice you can easily do what you want with out the need for both devices being together you can upload 50000 songs 9n play music for free and any device with ur hangouts and voice will receive ur calls and email notifications .....just need to make sure have Internet

[Q] Trusted Bluetooth device

Hello everyone, just moved from a Nexus 5 and enjoying many of the unique features, one thing that interests me most is the ability to unlock the phone with a trusted Bluetooth device. I already have a fitbit, so was hoping I could use this, however it turns out you can't, I think it is due to the way Bluetooth 4 is designed to minimise battery drain and it therefore not always connected. I was wondering what other people use , other than say speakers and headphones. I know Motorola have a device planned, but hasn't been released yet.
Thunder_Bolt said:
Hello everyone, just moved from a Nexus 5 and enjoying many of the unique features, one thing that interests me most is the ability to unlock the phone with a trusted Bluetooth device. I already have a fitbit, so was hoping I could use this, however it turns out you can't, I think it is due to the way Bluetooth 4 is designed to minimise battery drain and it therefore not always connected. I was wondering what other people use , other than say speakers and headphones. I know Motorola have a device planned, but hasn't been released yet.
Click to expand...
Click to collapse
HX550 earpeace is the only thing I have used. The Moto 360 is the coolest option - but an expensive one. I understand the new micro power-bank is like your fitbit and doesn't do the trick.
I actually have the Power Pack Micro that I use as a trusted device. Works perfectly!
Thanks for the replies, I never knew about the power pack micro, think that is what I will go for, hopefully Motorola will release it in the UK soon.
I connected mine to my desktop PC. Tried it for a bit and it was a cool idea, except that when connected to it the sound would go through the headsets plugged in to the PC. If I tried disabling the audio connection through properties on the PC the phone would disconnect. I couldn't find a way to keep it connected without audio so I ended up removing it.
Would be nice if there was a WiFi option, then I could pair it with that. For now I guess I'll just live without.
cbsevenfifty said:
I connected mine to my desktop PC. Tried it for a bit and it was a cool idea, except that when connected to it the sound would go through the headsets plugged in to the PC. If I tried disabling the audio connection through properties on the PC the phone would disconnect. I couldn't find a way to keep it connected without audio so I ended up removing it.
Would be nice if there was a WiFi option, then I could pair it with that. For now I guess I'll just live without.
Click to expand...
Click to collapse
Have a look at Skiplock in the play store. I have been using that in the meantime, it works much the same as the trusted devices, but also does wifi. I have it set up with my home wifi network so when my phone is in the house I don't need to put the unlock code into the phone, does Bluetooth as well, just need to get myself one of those power pack micro now...
Advanced Keyguard Manager also let's you bypass the lockscreen based on WiFi connection.
cbsevenfifty said:
I connected mine to my desktop PC. Tried it for a bit and it was a cool idea, except that when connected to it the sound would go through the headsets plugged in to the PC. If I tried disabling the audio connection through properties on the PC the phone would disconnect. I couldn't find a way to keep it connected without audio so I ended up removing it.
Would be nice if there was a WiFi option, then I could pair it with that. For now I guess I'll just live without.
Click to expand...
Click to collapse
Wifi trusted areas is supposed to come as part of Android L I believe.
You cant use it with your fitbit because it doesnt pair, it only uses bluetooth to sync to the app occasionally. It doesnt have anything to do with BT 4.0 afaik.
The only trusted device I use is my car.
Celeras said:
You cant use it with your fitbit because it doesnt pair, it only uses bluetooth to sync to the app occasionally. It doesnt have anything to do with BT 4.0 afaik.
The only trusted device I use is my car.
Click to expand...
Click to collapse
Thanks for the info Celeras, that makes perfect sense.
pseudopsyche said:
I actually have the Power Pack Micro that I use as a trusted device. Works perfectly!
Click to expand...
Click to collapse
Is there a way to quickly/easily lock the phone when using this? I'd like to do the same, but wonder about the security if someone steals both my phone and my keys -- the phone's power button won't lock the device if the trusted bluetooth is nearby.
Is it possible, for example, to use the button on the Power Pack Micro to disconnect or lock the device? Or is there some quick way to re-enable the PIN using the phone itself? It would presumably be easy with a Moto 360 or a BT headset -- just turn the BT device off, and the connection will be broken. But it's not clear that the Power Pack Micro can be turned off or disconnected without going through the Moto Connect app.
Thanks!
/dev/random said:
Is there a way to quickly/easily lock the phone when using this? I'd like to do the same, but wonder about the security if someone steals both my phone and my keys -- the phone's power button won't lock the device if the trusted bluetooth is nearby.
Is it possible, for example, to use the button on the Power Pack Micro to disconnect or lock the device? Or is there some quick way to re-enable the PIN using the phone itself? It would presumably be easy with a Moto 360 or a BT headset -- just turn the BT device off, and the connection will be broken. But it's not clear that the Power Pack Micro can be turned off or disconnected without going through the Moto Connect app.
Thanks!
Click to expand...
Click to collapse
You can quickly lock the screen from the notification shade...there is a persistent notification at the top of the shade saying you're unlocked, and and if you tap it, it locks and stays locked until the next time you unlock it from the PIN/Pattern/PW lockscreen. You could also quickly unlocked it by turning off whatever device you are using as a trusted BT device. The Power Pack Micro has a power button you can turn it off with.
I've got so many things I use as Trusted Devices:
Moto 360
Moto Hint
Power Pack Micro
BT stereo headphones (Bluebuds X)
BT speakers at my work desk
BT HR monitor while at the gym
My cars Sync system
Cobra Tag - this one is really cool device, like the Power Pack it tethers your phone and lets you page it the phone if you've misplaced it, but goes one step further - if you get too far from your phone, both the phone and the Cobra Tag sound an alarm. Great for making sure you don't walk away from a restaurant or home or wherever with your keys in your pocket but the phone left behind (or vice versa). the Power Pack doesn't do that tethering alarm.
To your original concern, if someone walks off with both your BT device and your phone, you're screwed, unless you have time to get on Android Device Manager and remotely lock the phone.
Wow, you have a lot of devices, unfortunately the Motorola powerpack micro is not available in the UK yet, hopefully it will arrive soon.

Oneplus One cannot connect to CHARGIE battery charge controller

I've been keeping my battery alive by using Battery Pro app but you have to monitor it 24/7. So I bought a couple of CHARGIE devices - a hardware controller that goes between the cord and charge block to turns charging on and off via an app.
My phone connected to the device only once during many tests. I've been trying various settings and suggestions by the company. They insist it will work with Android v6 so maybe the phone is the problem. Device requires bluetooth "ble" so I turned on full location options (GPS, Wi-fi, bluetooth, cellular networks). I turned on setting to display all ble devices - shows a printer from a neighbour's house but not a Chargie 2 feet away! Ideas or information welcome...
Bluetooth is required for basic communication with the Chargie device, but if your particular phone's Bluetooth doesn't work, you can use another phone to configure Hardware Limiter and use it on the 1st phone without the app. Location Access is unfortunately required by Android's device scan library. Chargie doesn't use it (no purpose). iOS doesn't request that, for example.
If that particular Chargie doesn't work at all, on any phone, please contact [email protected] and it will be replaced for free.
Thank you so much for the info. The Chargies work (I have 3), just not reliably or quickly. I can plug in my phone right beside the Chargie and the app says it isn't in "range". Or it continually says the BLUE Chargie isn't in range even when plugged into the RED one! I had all radios including GPS on during the testing but GPS isn't needed. Still not sure how Airplane mode with Bluetooth turned on affects it. BTW my Oneplus One has Bluetooth 4.0.
Getting the phone connected takes so long, it's hardly worth the time to figure out the "hardware limiter" option with a Windows laptop. Not much documentation on it. I certainly don't want to leave my phone beside the device while charging. I was getting some answers via email until I asked how to return the devices. I may have to just accept that the device works 'sometimes'.

Categories

Resources