i cant seem to get igo 08 to install. has anyone had any luck? i followed the instructions and it works fine on my tytn. on the touch it does the f
install but i cant get it to load...
any ideas or clues?
Copy IGO8 folder from Program Files from TyTN to TP,also copy the registry key HKLM-Software-IGO8 and import in TP. If you have necessary files on your card,it should work. I have it done,when we had problem with installing to Hermes.
Thanks I will try that now
how do I copy the registry key over?
hi guy i just download IGO8 from some website and put it in my new 8gb sd card, but when try to run it, the system got an error, asking for original sd card. what should i do? or what did i miss? can u guy help me plz...
thanks advance.
Does igo8 have north american maps now?
Related
Guys I saw somewhere on the forum or somewhere online that the wizard can be used like a removable drive but i lost the link. I tried searching the forums, but to no avail, can someone point me in the right direction once again?
Thanks
Anthony
[email protected] said:
Guys I saw somewhere on the forum or somewhere online that the wizard can be used like a removable drive but i lost the link. I tried searching the forums, but to no avail, can someone point me in the right direction once again?
Thanks
Anthony
Click to expand...
Click to collapse
Hi
regards
Thanks
Thanks for the fast reply and file, last question though... how do I install it? do I just copy it to my storage card?
[email protected] said:
Thanks for the fast reply and file, last question though... how do I install it? do I just copy it to my storage card?
Click to expand...
Click to collapse
HI
Yes... Simple..
Regards
It doesnt work, it says something about not being able to find the indicated storage card. How do i use this with my mini sd inside my G3 wizard? with WM6 "the real thing" flashed to it,
Its not working for me either... I copied the files from the compressed folder and into the root of my mini SD card and with the default settings I clicked "Activate" and I got the following error: "can't open the selected card/disk device". What am I missing?
try other version of wm5storage then... one of them must work.
and make SR after install to be sure, if its not working...
cannot check, but theres version, that works...1.73 works, i think:
http://www.pocketpcfreewares.com/en/index.php?soft=1543
[email protected] said:
Its not working for me either... I copied the files from the compressed folder and into the root of my mini SD card and with the default settings I clicked "Activate" and I got the following error: "can't open the selected card/disk device". What am I missing?
Click to expand...
Click to collapse
Are you copying WM5torage to your SD Card? Try and copy into My Device\Prgram Files\WM5torage and then try and activate it... If I'm not mistaken access to the SD card is lost on the Wizard if you enable WM5torage.. Thus having the application installed on the SD card cannot grant access to the SD Card because WM5torage itself (or perhaps other apps) are currently hogging access to the SDCard
Tip-Ex said:
Are you copying WM5torage to your SD Card? Try and copy into My Device\Prgram Files\WM5torage and then try and activate it... If I'm not mistaken access to the SD card is lost on the Wizard if you enable WM5torage.. Thus having the application installed on the SD card cannot grant access to the SD Card because WM5torage itself (or perhaps other apps) are currently hogging access to the SDCard
Click to expand...
Click to collapse
Yes, this is correct and that simple...
I copied it to program files on the storage memory and it still doesn't work. Same error comes up, and its version 1.73
killerkhatiby009 said:
I copied it to program files on the storage memory and it still doesn't work. Same error comes up, and its version 1.73
Click to expand...
Click to collapse
--cant remove, sorry--
i h8 lack of typical forum feature LIKE REMOVE double pressed posts.!
killerkhatiby009 said:
I copied it to program files on the storage memory and it still doesn't work. Same error comes up, and its version 1.73
Click to expand...
Click to collapse
...removed...
as far, i remember it MUST work,...anyway...
You've got both the WM5torage.exe AND the DLL and you installed from CAB and restarted as it demanded right?
yes I have both the .exe and .dll but I don't have a cab to install it and I did not restart.
killerkhatiby009 said:
yes I have both the .exe and .dll but I don't have a cab to install it and I did not restart.
Click to expand...
Click to collapse
Install it on the device. Not the storage card.
Like what was said by TipEx "Try and copy into My Device\Prgram Files\WM5torage and then try and activate it..."
i don't have cab to install it, i just copy it from the zip file to my device but it still doesnt work. do i start this before i connect a usb cable or while its connected?
Both order should not have problem.
However despite I can run wm5torage and connect to desktop successfully (Built into WM6 Underground), the connection is very slow (<20kb/s) and unstable (displaying I/O error while copying), I don't know what the problem is.
nothin said:
--cant remove, sorry--
i h8 lack of typical forum feature LIKE REMOVE double pressed posts.!
Click to expand...
Click to collapse
Click: Edit -> go advanced -> delete post
HTH HAND (if not let me know)
Flar
Hi all..
I've been using a TwinMOS 2GB x66 cad for 2 months now, and rarely I had the problem of disappearing storage card, but a simple SR or inserting the card again solved the problem.
Since a couple of hours, the symptom has come back, but now nothing solves it I've done a dozen of SR and inserted the card several times, but still the same problem: some folders are empty, and others are written in strange letters. the card isn't actually disappearing at all, ilauncher still shows its correct size, but all folders are corrupted.
I have the feeling that all this happened after installing the free medical program EPOCRATES, since only this program's folder was viewable in the program files folder on the storage card, and all others simply disappeared. Of course uninstalling the software didn't help
Any idea guys???
Thanks in advance.
Did you try to install this cab. It's for the htc p3300 but it's work too for the htc p3600 ...
http://www.europe.htc.com/support/faq.html?id=545&device=htcp3600
Isn't it strange that this patch has been published by HTC only mentionning the pb on P3300 and not ont the P3600 ?
Are you sure applying it on a P3600 is safe ?
Yes, i am...I apply it to mine and it's work fine... I didn't have some problems with my mini-sd card but with my sim+ (128 Mo) and now it's more stable !!
And as you can see the link i put is for the htc p3600.
This cab works also with the htc :
- S310
http://www.europe.htc.com/support/faq.html?id=545&device=htcs310
- S710
http://www.europe.htc.com/support/faq.html?id=545&device=htcs710
This has been posted before in various threads, but just to repeat:
The cab mentioned is for the Artemis/P3300. It installs one file to \windows: omap850_sdhc.dll, which is the SD driver for a device with a TI OMAP 850 processor.
It will have no effect, positive or negative, to install it on a device with a Samsung processor, except wasting 42K of space.
So why the support of HTC in this differents links (3600, s310, s710) refers to it ?? And it's fact that my sim+ is more stable now !! Not to bother you ... just to understand !!
shym said:
So why the support of HTC in this differents links (3600, s310, s710) refers to it ??
Click to expand...
Click to collapse
Actually they don't really. This has also been explained before in other posts, but here goes again:
If you go to www.europe.htc.com and navigate to support for P3300, you can find faq 545, which relates to the 'P3300 SD card enhancement', and when you've found that one, the URL in the address will be: www.europe.htc.com/support/faq.html?id=545
If you now go and add e.g. '&device=htcp3600' to the end of the URL and press enter, then you will get the same faq, but it will look like it's from the P3600 support, which is not really true; it's just a 'less fortunate' behaviour by the web site.
Faq 545, 'P3300 SD card enhancement', really belongs to the P3300 support area, and nowhere else.
shym said:
And it's fact that my sim+ is more stable now !! Not to bother you ... just to understand !!
Click to expand...
Click to collapse
I'm sure it's correct when you say so, but if it's caused by putting omap850_sdhc.dll in your \windows directory, then it's nothing short of a miracle.
Okay...thanks !
lts said:
I'm sure it's correct when you say so, but if it's caused by putting omap850_sdhc.dll in your \windows directory, then it's nothing short of a miracle.
Click to expand...
Click to collapse
... We never know... !!
Thanks guys for the replies, but I guess we went a little bit off-topic.
I understand that the patch mentioned above won't work. Is there any other solution to this issue, apart from formatting it again??
unfortunately, I forgot to move my SPB Backup file from the miniSD to my PC, so I lost even that file my bad
I would like to mention again how it happened: most presumably after installing the program EPOCRATES. Can this help??
Thanks again
You are far from being the first to have a problem like this with a SD card on a Trinity, and I'm afraid there is no easy cure.
Did you try and put the card in a card reader and see if it looked OK here?
If you can read it with a card reader, then make a backup (copy) to your PC, reformat it and restore the copy before putting it back in the Trinity, and see how it looks now.
lts said:
You are far from being the first to have a problem like this with a SD card on a Trinity, and I'm afraid there is no easy cure.
Did you try and put the card in a card reader and see if it looked OK here?
If you can read it with a card reader, then make a backup (copy) to your PC, reformat it and restore the copy before putting it back in the Trinity, and see how it looks now.
Click to expand...
Click to collapse
I tried that, but same strange characters are also shown on my PC using the SD adapter. there is even a 4GB eek file in the root directory of the card. everything so strange.
Guess that you will have to do a reformat if possible.
If there is something on the card that you really want to salvage before you do the reformat, then you could try to do this with a file recovery utility.
lts said:
Guess that you will have to do a reformat if possible.
If there is something on the card that you really want to salvage before you do the reformat, then you could try to do this with a file recovery utility.
Click to expand...
Click to collapse
Actually the Spb backup file would be really helpful Do u recommend any program for trying to recover it??
Thanks
I'm using an old release of WinHex myself.
WinHex is not free, but a trial can be downloaded from here: http://winhex.com/winhex/index-m.html
I'm not sure what limitations there might be in the unlicensed version, but I would recommend giving it a try before looking elsewhere.
I don't have any recent experience with other recovery utilities, but there are a number of them to be found here: http://www.download.com/3120-20_4-0.html?tg=dl-20&qt=recovery&tag=srch
Great, after trying to recover files with Winhex (unsuccessfully), The device doesn't recognize the card anymore, and now it requires a format I give up.
Is there anything I should make to prevent future problems like this??
First of all, should I format it as FAT16 or FAT32?
should I format it on the device or using a card reader?
should I use a specific program for formatting or the default windows application?
Thanks again
sdsentry
Try this - found from the Artemis forum.
It's a preventive measures - not one that can save your already messed up SD.
http://forum.xda-developers.com/showthread.php?t=299128&highlight=sdsentry
If you are still looking for a recovery solution, a friend had a similar incident with the 2GB Toshiba SD card on his 818 Pro just last week, and, not counting MP3s stored on the card (which he can restore from his CD library), I managed to recover for him some 90% of the files intact using Ontrack's EasyRecovery Professional.
See here:
http://forum.xda-developers.com/showthread.php?t=296800
Since I installed the official HTC GPS upgrade ROM I have had no problems anyway.
got this problem now after i reflshed my magician to the 02 rom from wm6.1. i cannot install both cab and exe files on my storage card.
it will automatically installs to the phone memory.
I thougt that was the normal way on wm2003.
With cabinstaller you can choose the path to install your cab-file.
Greetings
Hello guys,
I have a small question. It is maybe a silly one but I can't find the answer.
I have Copilot Live 8 installed (so 2 folders on my SD card: 'copilot' and '2577').
Everytime I flash my ROM, Copilot tries to auto-install itself, but fails (via autorun in the 2577 folder).
So everytime, I have to connect my HD2 to my PC and replace the 2577 folder with the original one. And only then it works.
But how can I avoid to connect my ppc to my PC and replace 2577.
There should be another way, an easiest way, right?
Many thanks for your assistance
Had the same problem
Just delete the 2577 folder form the sd card & keep the copilot cab elsewhere on the card.
After rom flash just install the cab: select sd card as location everytime, that way all your previous settings, poi's etc remain.
Now I wish I didn't have to reenter the license key after each flash
Edit: the 2577 folder is not needed. its the copilot folder that's important & the cab
Thank you Harry for your kind answer.
Actually I am sure there should be an easiest way....
For instance, when I just replace the 2577 folder (which means I have to connect to my PC ) I don't have to enter the license key again.
At least, not to have to enter the license key is a good point.
PS: Maybe a solution would consist to save the original 2577 folder somewhere else on the SD card, and replace the former one with it after a flash. But I don't know if it will work. Also it wastes some memory space.
I really do not understand why Copilot's Autorun cannot do the job
how to desinstall complitely the original copilot?
how to uninstall completely the original copilot?
thanks
angelo2727 said:
how to uninstall completely the original copilot?
thanks
Click to expand...
Click to collapse
Check this out mate...hope this helps...!!
http://forum.xda-developers.com/showthread.php?t=583421
Hello I have been trying to use Android on Rhodium (Touch Pro 2, Tilt 2) Updated Build from the website. Project Android Rebuild: (I cant link to the site)
Here's my issue. I was installing the CAB file for Reference Build: Stock 2.2 Froyo
Now everything was working to a point. I would install it and I would have all the features and so forth, but I was stuck in airplane mode. After doing some digging on the site, I seen if I took out the SIM card I would catch my carrier (sprint). Everything was working fine. I was stoked. Then I ran out of program memory.. I found this odd as it was already on my memory card. I read that I had to use a program to move programs tot he sdcard inside android. seemed it was a little to late and once I downloaded a program to do it it corrupted some of the files which then I had to format my memory card.. Back to the drawing board.
So now it seems as the phone or the memory card isn't routed any more.. This is driving me insane. I still have the SIM card out. Would that be the issue why it isn't finding the SDCARD? I even had a backed up folder of where everything worked. I threw it on the SDCARD to see if I can trick the system some how, and to no avail the SDCARD wasnt coming up in the system options.. I am so stuck and cant figure it out.. If there is a alternitive way to do this please let me know, I find the CAB way to be the easiest as I never flashed a ROM before. Thanks in advance and thank you all for this great community!
51 views and not one reply? Has anyone had this problem?