Database Info

No backligth in SPV-M1000 - pls help

Hello,
I just became a owner of a SPV-M1000 - a sad owner :?
This device just dont want to turn on the backligth. I have been thou settings, manual, tried severel profiles ect. Still without resault. I could really use help on this one
I have not yet d/l any updates atall or patches yet and I really doubt that the backligth in this device is defect.
Also - I dont quite know wich model the "Orange SPV-M1000" is, but its is very identically with the third illustration from the rigth on this forum front page.
Best regards & Thank you,
Skipper

you can toggle the backlight by holding down the on off button for awhile
that is unless it's broken

I just learned a new future there - yes, but it did not solve my problem. I have now been in touch with a repairs shop and the technichian had a very hard time to belive that the display backligth was malfunctioning and that it must be a user error. I dont belive that..
A new display is pretty expensive and before I buy this i´d kinda hoped that someone else had a more experience know-how in this area before I purchases this.
Btw - if it comes to buy a new display do anyone know where on the net this can be done. I was thinking change it myselves.
:wink:

have you tried hardreseting it just to in case ?
if the backlight dont come on when it gets to the calibrate screen and such i would say it's defect
and if it's under warrenty first ½ year the orange guy have to prove that you broke it or give you a new one

I just bougt a used display from a companig that had the same model that had a damaged chassic - pretty cheap .. And it works, perfect.
Now I have to install all the latest software and drivers for both the device and computer. I will try look around the net for this but if you maby would be kind and guide me, would be great.
Thanks

Kindly help me friends. This is really very difficult to bear

Annoying sound when kaiser is awake..Kindly suggest*urgent*
Hi guyz
I just bought a TyTn II device. I don't know whats gone wrong with it that it is giving me annoying sound when its awake but surprisingly when i turn off the screen the sound goes off. its very annoying just like some bee is there behind..
I wonder if i using some wrong radio 1.65.24.36 with PDACORNER v16ultimate, Hard SPL 3.29[as per the recommendation of cook]. I tried to change the radio but to no avail. it seems its more than that.
i dont know if there is some hardware problem or what. but its really making my experience painful. Kindly suggest your remedies.
poor I tried to port hard spl 3.56 but to no avail.
I wish if someone else can help me out. This is really getting very difficult for me to listen to calls with this buzz sound in the back. Kindly help me someone. I had a word with some technician & he said its a problem of moisture & I need to keep it in direct sunlight for an hour. I am not sure if that is going to work tomorrow morning but I would definitely like to see some views about this problem.
--------------------------------------------------------------------
This is a matter from this thread
Kindly suggest me the remedies as I should know if I need to do anything other than what I have already done.

If it is moisture another suggestion would be to put it in a jar of uncooked dry rice overnight or for longer if at all posssible. This should draw out any moisture.

thanks deedee for your kind concern but I am not sure if it is really a moisture thing. Any more technical advice if some mechanic friend is there? It would be great if someone has already faced this problem & rectify it in the past.

First of all, can you be any more specific about what section of the phone the buzzing is coming from? For instance, does it sound like it is coming from the speaker? The battery area? If you can, try narrow it down to a specific area of the phone.

thanks jadel. it appears the noise is coming from the earphone side. I can hear it only when I try to attend some call. I wonder if its because of some earphone damage or what? to be specific it is in the earphone side [in upper part of phone]

It sounds like it could be some hardware damage related to the earphone. You might let people know what sort of software you are running on your phone as well. It could be a third party application is causing it. The suggestions from others about changing the brightness of your backlight, and also about changing your sound level, is a good one. It could easily be feedback caused by a wiring issue. Hard to say. I would certainly get it looked at by a tech, or even ask the local phone store if they have seen similar.

I am using no third party softwares & I am getting this noise even at the time of booting so it seems to me a problem of hardware. I am running v15 pdacorner rom with radio 1.65.24.36, with 3.56 hard spl. I changed the spl to see if it can be rectified by that but to no avail.
It seems I need to go to some service center for the hardware as I can only manage software myself.
Thanks allover jadel for your concern..
I was probably looking for someone who already faced this problem or himself a technician. it can be described as humming slowly turning in to sharp noise.
Hope someone still comes out with his solution..

Omnia Internal Gsm Antenna - Help Needed

Hi guys,
The story started before 1 week when happily i decided to buy a full housing spare parts for my omnia and hopefully it should looks like new...the package came and i opened my omnia to change the parts...the cover didnt fit 100% but with some small patents finally it fitted...the phone booted up and everything looked "ok"...the next day i realized that call quality was too low, sometimes call dropped(cause of the too low signal) and inside building i have no signal...
Now guys does anyone knows anything about that?
where is the phone gsm transmitter and it cables?
or what else can i do...
Please your the only help i can have...

hi to all i have the same problem after the change of digitizer (touch) any one can help me? tnx

BURST at&t 8525 LOUDSPEAKER WIRES

Hi everyone. I am new to the whole xda-developers site. But I beg you to please help me with a problem i am having. I have an at&t 8525. Through time it fell and the screen stopped working and i had to open it and fix it for myself. While trying to fix the screen the red and black wires connected to the loudspeaker burst and now i cannot fix it. If you can please tell me exactly where to solder the wires to fix it then that would be much appreciated. Thank you in advance. Bye.

Dream jtag

hi every one can any body help me to find other RTCK point in another place on dream motherboard because i lost the original point ,my solder was to much hot
thnx for help

toyoki said:
hi every one can any body help me to find other RTCK point in another place on dream motherboard because i lost the original point ,my solder was to much hot
thnx for help
Click to expand...
Click to collapse
1) why not post in the original topic
2) You don't need RTCK see image on the right The lower right of the 6 pins is RTCK you see the copper since nothing is attached.
Any other questions please use the original thread as we are all subscribed to that one.

please help me
i solder all pins without RTCK
problem shown in the picture
tnx

Hi toyoki,
i am not familiar with JTAG Manager for RIFF Box... but i guess it is easy to solve.
Check the setting that i marked in the pic. There must be some other options.
You should use a fixed value for TCK.
Without RTCK attached you should also slow down the clock.
Please use the forum thread ezterry pointed at, to discuss further questions.
You might also ask the guys building RIFF Box for help.
Give 'em some nice greets from XDA-developers!
Cheers,
scholbert