Hi all!
Does anybody now how I could change the Keyboard layout on my UK XDA to an German Layout (QWERTZ)?
Is there maybe also a way to extend the dictionary with german words?
Thanks
about the dic then it should learn words and start sugesting often used words which in your case would be german
Hi,
I just flashed the shap's French rom wich works great.
However, here in Switzerland, we have a QWERTZ (Swiss French) keyboard on the Kaiser.
How can i change this in order to reflect the corrects keys pressed on the hard keyboard ?
Thank you in advance,
Regards,
Mike
if swiss german is the same as swiss french layout, this thread can help you. (i'm using the german one with my swiss german keyboard layout and every key is where it belongs )
i think you want to stay with french autocorrections etc (the above cab has also german autocorrect etc included)
and only want to remap the hardware keyboard (without Autocorrect files etc),
i'm not quiet sure, but changing HKLM|Hardware|DeviceMap|Keybd > CurLang to your CountryID could also help ?
correct me if i'm wrong....as i said, i'm not quiet sure...
hth
Hey, I need orginal Norwegian KeyPad for my diamond as a cab.
is this posible?
Sorry for bad spelling...
do you mean EzInput with norwegian T9?
I think he means whatever it takes to make the norwegian letters æøå possible to write. (I'm looking for the same thing )
Right now, on my Raphael the regional settings are set to norwegian, but when you press fn + i, o, p, k or l (which should make the Ä, Ö, Å. Æ, Ø letters) it just makes the english : ; and so forth.
Come to think about it, he doesn't have the keypad that the raphael has, so I think he's looking for an onscreen keyboard where it's possible to tap in what I mentioned above
Since lot of users can have some problems, i created how to change xt9 language. some can find this quite usefull
you don`t need to install any other files, it is just a little bit of reg editing
1. you must check value here
\HKLM\Software\Tegic\eT9\DefaultLanguage
for wwe rom it should be hex 0109 (dec 259) (it depends on your rom)
2.find here your default hex number (should be 0109 for wwe)
\HKLM\Software\Tegic\eT9\LdbFiles\
in this directory are keys with string value like XXIsUN_xt9.ldb
for wwe at 0109 it is supposed to be ENIsUN_xt9.ldb (it depends on your rom)
change first two letters by language you want (warning, this codes can be assigned bad, i am guessing it from alpha2, pm me, if you have different opinion):
AR - Argentina
CS - Czech Republic
DA - Denmark
DE - Germany
EL - Greece
ES - Spain
FI - Finland
FR - France
HU - Hungaria
IT - Italy
NL - Netherlands
NO - Norway
PL - Poland
PT - Portugal
RO - Rumunia
RU - russia
SK - Slovakia
SV - Sweden
TR - Turkey
soft reset device, and it should work. feedback appreciated.
Thanks, didn't know. I can add no reset is needed, and the number in defaultlanguage is decimal value of the preffered language (definition is in hex).
Now the libraries without diacritical marks would be useful
Hi, I'm trying to do this for Turkish. I used:
HKLM\Software\Tegic\eT9\Ldbfiles\11F = TRlsUN_xt9.ldb
I can see Turkish in the language list but the selection does not change when I click on it. It works for other languages though. Any ideas why?
hi, pls how can i do this?
20mihalko said:
Hi, I`m trying to find some cab for slovak xt9, but i`m not lucky... has anybody some solution how to get slovak word database for htc xt9? thanks
EDIT: solved sorry for spamming
HKLM\Software\Tegic\eT9\AvailableLanguages = 0109,010C,0107,0110,010A,011B,0105
HKLM\Software\Tegic\eT9\Ldbfiles\105 = CSlsUN_xt9.ldb
HKLM\Software\Tegic\eT9\Ldbfiles\11B = SKlsUN_xt9.ldb
HKLM\Software\Tegic\eT9\DefaultLanguage = 261
Click to expand...
Click to collapse
i tried it with registry editor but i miss the last 2 values.
It is neccessary to write it there or i have bad vs? i have rom 43 not 48, because i dont know, where can i download it.
thx bro SR me too O2, me too.
Is it only a matter of reg edit? No aditional files needed? I'm looking for portuguese T9. Some cabs for other devices dont seem to work on Leo.
Anyone solved this one?
check first post, a have added how to change your language
20mihalko said:
check first post, a have added how to change your language
Click to expand...
Click to collapse
I followed your steps. In addition to that I added 0816 to the ...et9\availablelanguage, so as to have an additional entry on language selection, then soft reset the device.
Portuguese doesn't appear on the list, just "unknown". Keyboard layout on compact QWERTY changes to Portuguese layout but predictive test remains English.
Windows folder does have the PTIsUN_xt9.ldb. Any thoughts?
point is, that value, where is linked your language file at dir LdbFiles must be set in DefaultLanguage, and must be into availablelanguage... check your defaultlanguage value... be sure you are writing it in HEX
I did! They all match. I was using a Portuguese XT9 for Niki. It seemed to work fine, only some times strange stuff happens like only numbers will be written instead of the letters on a single quick press. I've seen on other topics some additional reg changes. I'm now wondering if it is possible to change to any language from any rom since some files could be missing in WWE, not allowing me to apply you steps to get Portuguese.
How about other languages, that are not on this list ???
It works for Romanian. But the dictionary its not that rich so its kind of useless.
GSC2K8 said:
Hi, I'm trying to do this for Turkish. I used:
HKLM\Software\Tegic\eT9\Ldbfiles\11F = TRlsUN_xt9.ldb
I can see Turkish in the language list but the selection does not change when I click on it. It works for other languages though. Any ideas why?
Click to expand...
Click to collapse
is there any comment on this?
i have the same problem
Hi!
I want to disable the xt9. I have installed the soft disable xt9 but stil not effected. So how can I change it to disable in the registry please
Thanks
karakemal said:
is there any comment on this?
i have the same problem
Click to expand...
Click to collapse
do you have default language 11F ?
[solved]
Alright my mates
http://forum.xda-developers.com/showpost.php?p=3304868&postcount=5)
here is the solution. download your language pack and you will have perfect xt9 dic.
I've check Polish and leters are messed up l=. z=x, x=c, v=n, b=n ,n=.,m=, if I rememberd correct but word prediction works
with out xt9 keyboard works as it should.
lutanica said:
Alright my mates
http://forum.xda-developers.com/showpost.php?p=3304868&postcount=5)
here is the solution. download your language pack and you will have perfect xt9 dic.
Click to expand...
Click to collapse
Hi! I've got the Portuguese cab and I can confirm that the word prediction works, BUT only for compact QUERTY and Phone Keypad. For the Full QUERTY, it really mess the keys.
Well... it's much better than nothing. I think it's half of a full solution.
20mihalko said:
do you have default language 11F ?
Click to expand...
Click to collapse
no default is 119 (english) i change to 11F but still the same problem after soft reset
it changes automatically to english back.
lutanica said:
Alright my mates
http://forum.xda-developers.com/showpost.php?p=3304868&postcount=5)
here is the solution. download your language pack and you will have perfect xt9 dic.
Click to expand...
Click to collapse
There is no turkish here
where can i find turkish xt9 ?
Sorry mate. But you could ask the guy that made those .cab files and put them there. Maybe he has the turkish .cab file somewhere.
karakemal said:
There is no turkish here
where can i find turkish xt9 ?
Click to expand...
Click to collapse
Hello guys,
I just flashed this ROM and it seems really great. Big up for Timduru!
Just one question.
I´m using czech keyboard layout for the asusec hardware keyboard. This layout is by default qwertz.
Anyway I would like to use czech qwerty layout. Is it possible?
I´ve read that the qwerty layout was in 4.2.2 and Timduru changed it in 4.3.x to qwertz - so any chance to have both of them?
http://forum.xda-developers.com/showthread.php?t=2362764&page=140
I was also looking into the following location based on the thread linked bellow but couldn´t find anything regarding czech layout (which I could modify)
/system/usr/keychars
/system/usr/keylayout
http://forum.xda-developers.com/showthread.php?t=2392087&page=158
Thanks a lot for your help.
p.s. I misstzpe Z and Y so manz time just to write this post
You can do it with selecting two languages for example: Czech (qwertz) and English (qwerty) and just switching between them with "Ctrl+Space Bar".
When you need to use characters like: "ř,ž,č,š" you can just easily switch to the czech layout from the english one. (Czech here!)
Jako nejlepší řešení mi příjde si zvolit dva jazyky a měnit mezi nima!
Sent from my Transformer TF101 using xda app-developers app
Dagnan said:
You can do it with selecting two languages for example: Czech (qwertz) and English (qwerty) and just switching between them with "Ctrl+Space Bar".
When you need to use characters like: "ř,ž,č,š" you can just easily switch to the czech layout from the english one. (Czech here!)
Jako nejlepší řešení mi příjde si zvolit dva jazyky a měnit mezi nima!
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Dagnan thanks for your reply but that is not a solution for me. I'm used to qwerty even when using czech language, so that would mean switching the languages all the time to write something in czech.
=01/11/14 - V017=
- Add Czech qwerty keyboard layout
(Taken from: http://public.timduru.org/Android/tf101/KatKiss/4.4/ChangeLog.html )
Looks like timduru has heard your callings! :thumbup: