Hi all,
I have also a HTC Wizard and i want also the WM6 titanium on this device.
But what i do, it doesnt work. The flashing is going well (i haved flashed it to the WM6Titanium rom).
When i reset the wizard it stil stays in the WM5 with the following details:
ROM version 2.26.10.2 WWE
ROM date: 6/7/06
Radio version: 02.25.11
Protocol: 4.1.13.12
ExtROM: 2.26.10.105
Model NO: WIZA200
AKU: 2.3
IPL: 2.17
SPL: 2.17
GSM 02.25.11
I did the "Howto flash a Wizard... a little tutorial" from member Vippie before i do any WM6 flashing. What i try, it will not flash to any WM6
Who knows what the problem is?
Then you're phone is probably CID locked. I recommend you reading the thread about how to get rid of the CID lock.
Succes
Your right.. I had upgrade my wizard before with a other ROM. I think there was an lock in it.. Thanks..
PLEASE make sure you go through the Wiki and read all of the Stickys before you ask questions like this. Almost no phone comes CID unlocked (the ones on eBay that are used sometimes are) but everything else is blocked.. so you need to CID unlock it and make sure that you read everything about it so you don't brick your phone. good luck
Nstefanelli
ROM v 2.25.11.1 WWE
ROM 5/11/06
Radio v 02.25.11
Protocol v 4.1.13.12
ExtROM v 2.25.11.102
empiresoftware said:
ROM v 2.25.11.1 WWE
ROM 5/11/06
Radio v 02.25.11
Protocol v 4.1.13.12
ExtROM v 2.25.11.102
Click to expand...
Click to collapse
We don't have a way of telling whether or not it is unlocked, just whether or not you CAN unlock it (depending on whether you have a G3 or G4) I am not sure what you have from this, so please soft reset your phone and give us the IPL and SPL so we can tell you what type of phone you have.
Also, go here once you have found out your IPL and SPL to find out whether you have a G3 or G4. G4s cannot be unlocked and you need to use different software to flash your phone. Good luck.
MOD - Please move this to the General forum for the Wizard.
IPL & SPL
The IPL & SPL are both "2.25" no zeros...so it must be G3.
You should do some reading first before you brick your phone. Many people want to jump right in without reading. You should know if you CID unlocked your phone or not, unless you bought it from someone else.
There is know way to check if it is CID unlocked. Just run the program and choose yes when it asks if you want to CID unlock. You will also find that people here will suggest using the search button.
For your reading enjoyment.
http://forum.xda-developers.com/showthread.php?t=310831
http://forum.xda-developers.com/showthread.php?t=285435
http://forum.xda-developers.com/showthread.php?t=249474
http://forum.xda-developers.com/showthread.php?t=265928
CID Unlock fails
Well I did read the procedure, but I get the following error when trying to unlock or CID unlock the phone:
machinagod's HTC Wizard Unlocker v0.2
NOW WITH CID Unlocking POWER!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: C
CID unlocking mobile... DO NOT DISCONNECT UNTIL THE PHONE REBOOTS!
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
g=92: 17cc0cb1 - 8dba82c2eac5a1f1
Key idx: 92
olddata: 5a59d28bc2764cc8460f100469464259621e8365aeb43277cf 2858b925828379
newdata: 95ea23df0bf16432cf7be60912a5cbdedee342037c9d3bd3de e342037c9d3bd3
newsum=fe016817 encsum=2d0c87f2537a5c73
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072746
Your phone is now CID unlocked....
Store the generated 'lock_backup.bin' file in a safe place. It can help to resto
re your device if anything goes wrong.
ECHO is off.
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Here is are my phone details:
Cingluar 8125
ROM v 2.25.11.1 WWE
ROM 5/11/06
Radio v 02.25.11
Protocol v 4.1.13.12
ExtROM v 2.25.11.102
I'd really like to try these ROMs, but if I can't CID unlock (or verify if CID unlock worked) then I'm screwed.
Thanks!
I saw that in your other post, it says that your phone is now CID unlocked but I don't know about the error. Maybe someone else can answer that.
Yeah that message is pretty much canned in the batch file...am I skipping a step somewhere prior to running lokiwiz?
Xelencin ROM w/Unlocker .. G3-Only .. !
http://rapidshare.com/files/39310061/T-Mobile_RUU_Wizard_2261020_226_22511_ENG_US.exe
This is the link I used....when I received my replacement device.
http://forum.xda-developers.com/showthread.php?t=285435
The newer devices are harder to crack.
You must follow step by step to properly CID Unlock the device.
Xelecin who was a cook created a T-Mo ROM with a built in CID Unlocker built in
Its not guaranteed to work on newer devices but its worth a try.....
07/08/2009: I don't have Elfin anymore, so please DO NOT PM me asking how to CID unlock/USPL related questions. if you have any difficulty, post in this thread and wait for your fellow members to reply. thank you!
ELF IPL 1.17.0002 & USPL 1.17.0000This is a newer version of USPL for Elf (based on SPL 1.17.0000) for CID unlocking on similar lines of pof's Elf_USPL based on Elf SPL 1.11.0000.
Credits:
1. pof: for the 1st Elf USPL 1.11.0000.
2. ayyu3m: first person to test new USPL 1.17.0000 for me coz i dont have an Elf.
Note:
1. Should be used only on Elf with IPL 1.1X.XXX2. Some Elf owners have been using USPL 1.11.0000 with IPL 2.2X.XXX2 already without any problem. If that is the case, this USPL should work for those IPLs as well, but i can not guarantee.
2. Keep a shipped ROM for your phone in case of emergency.
3. If you are already using patched SPL 1.11.0000, then you can just run the romupdateutility.exe inside RUU folder to flash this SPL.
4. As it is based upon Elf_USPL, 'rapi' should be enabled before using it.
5. Check post 2 for USPL 1.19.0000, post 3 for USPL 2.26.0000 and post 4 for USPL 2.28.0000.
Don't hold me responsible if something goes wrong
Elf USPL 1.19.0000 by kokotas
ELF IPL 1.19.0002 & USPL 1.19.0000Another new USPL 1.19.0000 based on Elf original SPL 1.19.0000 has been patched by kokotas for CID unlocking. The nbh file of this USPL ready to be flashed can be downloaded here.
The procedure of flashing it is similar to previous USPLs and the instructions in post 1 apply to this USPL as well.
ELF & ELFIN IPL 2.26.0002 & USPL 2.26.0000
ALWAYS HAVE AN ORIGINAL STOCK ROM AS A BACKUP IF IT DOES NOT EXIST YOU ARE ONLY INCREASING THE RISK OF GETTING INTO MORE TROUBLE
Instructions for ELF.
EDIT 30/07/08: As confirmed by eshield (http://forum.xda-developers.com/showpost.php?p=2465989&postcount=96), Elf owners can directly upgrade the IPL/USPL.
EDIT 06/09/08: Directly upgrading IPL/USPL in one go may or may not work for all of Elf owners (if the Elf is pre-release or old one). If your phone (Elf only) is stuck at Smart mobility screen with IPL 2.26, SPL 2.26, try downgrading the IPL to 1.19 or 1.17.
For users that already have IPL 2.2X series
First make sure your device is application Unlocked. By installing EnableRapi.Cab & Cert_SPC.Cab on your device, then reboot the phone.
Take out MicroSD card from Slot.
Connect Device through Active Sync.
Run the elf-uspl.exe from the Extracted Download (ELF_USPL_2.26.0000.zip)
Watch Screen and Press Enter When Asked.
Screen should Jump to White on Phone and on PC Flashing Loading Bar will Show.
Stuck in Black Ducky Loading Screen?, check Active Sync Connection or Do a hard reset on Phone first. But be sure to do the last Actual Flashing in White Screen. Sometimes this needs a few tries to go through white screen.
Done.
For users that have IPL 1.1X series
Steps below are all recommended to remove Micro SD card.
First Make sure you allready have a Patched Pre 2.26 SPL (ELF_USPL_1.17.0000.zip)
You can install this Patched Wit the Same Instructions as above for the 2.26 SPL.
Then When you have a Patched 1.1X SPL install the 2.26 IPL (ELF_IPL_2.26.0000.zip)
After you have rebooted you can confirm your SPL & IPL versions by pressing Reset Button With Stylus and Pressing and Holding the Camera Button to get into TriColour Bootloader.
Reset Phone Back into the OS And follow instrcutions above for Flashing Patched 2.26 SPL.
At this point you do not to install CertSPC.cab & EnableRapi.Cab
Done
Unless you are familiar with these processes do not try them, and wait for more confirms.
Flashing is done at own Risk and might Void your Warantee.
Note:
You can also update the IPL&USPL to 2.26 together in one go if you are already using the USPL 1.17.0000 or USPL 1.19.0000. This has been tested by ChiemY(http://forum.xda-developers.com/showpost.php?p=2454555&postcount=44). So,if you are willing to upgrade together, download the ELF_IPL-USPL_2.26.0000.zip file and run the romupdateutility.exe.
ELF & ELFIN IPL 2.27.0002 & USPL 2.28.0000 V2Guys/gals, the USPL 2.28.0000 based on original SPL 2.28.0000 is ready for both Elf and Elfin
It wouldn't have been possible without the help of cmonex.
Credits:
1. cmonex : For helping me to solve problem of phone stuck in bootloader with original SPL 2.28 and checking the other patches.
2. pof : For the CID unlocking patch etc.
3. marchese : For the IPL 2.27.0002.
Procedure: the procedure remains the same as the prvious versions.
EDIT 30/07/08: As confirmed by eshield (http://forum.xda-developers.com/showpost.php?p=2465989&postcount=96), Elf owners can directly upgrade the IPL/USPL.
EDIT 06/09/08: Directly upgrading IPL/USPL in one go may or may not work for all of Elf owners (if the Elf is pre-release or old one). If your phone (Elf only) is stuck at Smart mobility screen with IPL 2.27, SPL 2.28, try downgrading the IPL to 1.19 or 1.17.
Those who want to upgrade to IPL 2.27.0002 and USPL 2.28.0000 together in one go, can download IPL_2.27_USPL_2.28.zip, the ready to flash RUU_Signed.nbh file.
EDIT 28/10/2008:
New released USPL28_V2 which has an extra feature (apart from the normal CID unlocking features etc) that you can flash ROM of any size now even below 50 MB using RUU. Yes, this USPL V2 removes the restriction of 50 MB size of ROM for normal RUU and that means the OS.NB doesn't need to be hexed if it is below 50 MB and one doesn't need to flash using SD card in order to gain the extra space.
BIG thanks to cmonex for enabling this feature. Enjoy!
Donate to cmonex
Ipl 3.07.0002 & Uspl 3.07.0000
IPL 3.07, 3.10 & USPL 3.07, 3.10This is the latest version of the IPL/USPL based on the original WM 6.1 WWE ROM 3.07.720.03. This USPL will:
1. CID unlock the device for flashing any ROM
2. Remove the restriction on minimum size (previous limit was 50 MB) of the ROM.
PS: the procedure to flash the USPL is same as before. If you are already using some USPL (USPL 1.17, 2.26, 2.28 etc), then you just have to flash the new NBH with RUU. Enjoy !
EDIT (17-11-08): New IPL 3.10.0002 and USPL 3.10.0000 attached
Ipl & uspl 3.14
IPL & USPL 3.14Here is newest IPL and USPL 3.14 . thanks to GPRS for sharing the original source of this IPL and SPL. The features and procedure to flash this USPL are same to that of previous USPLs. I've tested it on my Elfin and it works well
Enjoy
07/08/2009: I don't have Elfin anymore, so please DO NOT PM me asking how to CID unlock/USPL related questions. if you have any difficulty, post in this thread and wait for your fellow members to reply. thank you!
Dump the SPL from Elf(in)
Those who are interested in dumping their SPL from the phone, please follow the steps below:
1. Download the attached archive (thanks to kokotas).
2. Unzip it somewhere (preferably to the root of a drive).
3. Connect your phone to PC with USB cable.
4. Make sure that ActiveSync is working.
5. Run the DSPL.bat file and follow on-screen instructions.
After the SPL dump is finished, you will get a new file named SPL.nbx in the unzipped folder. But this will be a 512 KB dump file and CAN NOT be flashed to Elf/Elfin as such. Therefore, if someone wants to make a working SPL of the dump, please PM me the link of the dumped SPL.nbx file and i'll make a flashable SPL of the same.
EDIT: there is an easier method posted by dsixda to dump the SPL in this thread, i recommend to use that instead of this one.
http://forum.xda-developers.com/showthread.php?t=406721
Unlocks the CID (country ID) so that you can flash any Elf ROM to your phone.
Instead of flashing the USPL you can also run the temporary USPL (white screen method), but if you flash a bad ROM (bricks your phone) then you are in trouble, as the temporary USPL makes your phone back to CID locked afterwards.
The temporary USPL method also is annoying because it requires you to remove your sim/memory cards and may take several attempts to get it finally working... The flashed USPL, on the other hand, will let you run just the Update Utility and nothing extra... plus it works the first time always.
Dumping your IPL
1.Download the attached archive & extract on Desktop.
2.Go inside the folder DumpIPL & run the DIPL.bat
3.If everything went ok, you'll find your dumped IPL.nb in that folder soon
4.Do not use the generated file for flashing untill you post it in this thread & someone check that it's a "good" IPL!
Noonski said:
For the guy allready running SPL 2.26 on ELF can he check if Changing Pagepool size also works using ELF method on NBH file?
C now that this is the ELFIN SPL 2.26 your referring to.
I need to know this guy is absolutly sure it was an ELF
Click to expand...
Click to collapse
Hi
I am very sure mine one is an ELF (64/128) and confirm that changing pagepool size also works using ELF method on NBH file. My ELF is set at 6MB PP.
Moreover, changing the pagepool size with the attached pagepool changer for ELF is not a problem at all. Thanks to the creator for the pagepool changer.
*edit
Not only the boot time is reduced, the ELF now runs faster and the memory management is amazing, mine is set at 6MB PP, always show 25-26MB free memory
at most of the time after closing all application except background processes. I can say the memory leak is almost zero.
And the best of all, to flash a ROM, I do not need to take out the SIM card and Memory card.
Rgds
BTW, one thing I noted with 2.26 patched is that when I try to flash a ROM it will complain about Error 328 (I think), saying that the Update Utility is not compatible. This happens whenever the ROM says it has a version of 1.000.00.0 in the Utility. So if I change it to something like 3.000.00.0 in HTC Tools then it flashes fine
dsixda said:
BTW, one thing I noted with 2.26 patched is that when I try to flash a ROM it will complain about Error 328 (I think), saying that the Update Utility is not compatible. This happens whenever the ROM says it has a version of 1.000.00.0 in the Utility. So if I change it to something like 3.000.00.0 in HTC Tools then it flashes fine
Click to expand...
Click to collapse
Doesn't happen with me on my ELF and out of laziness i have version 1.000.00.0 set.
(or it might be because of my flashing frenzy)
I can Up my Update utility Next thing morrow.
htctouchp said:
yes, i also get these erros if my ROM version is like that. it happened to me even when i used USPL 2.20. so as a precaution, i've permamnently set my htcrt to ROM version of the base ROM 2.26
Click to expand...
Click to collapse
Okay so it might be a little ELFIN sickness then
It Propably won't make a difference but here's My Ruu anyway
upgrade from 1.19 to 2.26 ?
For the upgrade to 2.26, the procedure say to use elf-uspl.exe to upgrade the
SPL 2.26. If we have the IPL on 2.26 and the USPL 1.17 (or 1.19) why we cant
just update directly from the bootloader ?
And about the upgrade from IPL/SPL 1.19 to IPL/SPL 2.26 directly
in one file from bootloader ?
guys/gals...new USPL 2.28.0000 is ready and available for download in post 4 on first page .
ChiemY said:
For the upgrade to 2.26, the procedure say to use elf-uspl.exe to upgrade the
SPL 2.26. If we have the IPL on 2.26 and the USPL 1.17 (or 1.19) why we cant
just update directly from the bootloader ?
And about the upgrade from IPL/SPL 1.19 to IPL/SPL 2.26 directly
in one file from bootloader ?
Click to expand...
Click to collapse
yes, u should be able to do that directly. those instructions have been posted by Noonski as he was the one to test that on Elf (remember, i don't have Elf to test). but u can try ur method. if it works well, i'll modify the post
Well it was only after ckpv5 confirmed it.
Yes Merged Posts.
The reason why i did not Flash both SPL and IPL at the same time is because i like safety.
So is the version number of ROM flashin related to ELFIN's only?
(You know where you need to put 2.x into HTCRT)
As you can see below.... Why.... Some might do some different Flashing methods and as more Confirms come in this might change the method.
If there's anything none of us want to happen is someone to Brick their phone.
Boot Time vs Patched SPL's
Note: Time measured from the time 'Smart Mobility' appears on the screen. Soft Reset repeated 2-3 times on each USPL
1) USPL 1.11 (IPL 1.11) : ~50 secs
2) USPL 1.17 (IPL 1.11) : ~55 secs *
3) USPL 1.17 (IPL 1.17) : ~55 secs *
4) USPL 1.17 (IPL 2.26) : ~59 secs **
5) USPL 2.26 (IPL 2.26) : ~48 secs ***
6) USPL 2.28 (IPL 2.26) : ~48 secs
Conclusions:
* USPL 1.17 takes ~5 secs longer than USPL 1.11 (bit suprising)
** USPL 1.17 with IPL 2.26 takes distinctively ~60 secs from all the other combinations. Indeed a non-bootable combination.
*** USPL 2.26 and USPL 2.28 takes lesser time to boot conclusively
NOTE: This evaluation alone DOES NOT conclude you must use the latest SPL and IPL. But it gives you a CHOICE, to choose from different IPL and USPL, you can use to customize your device. Pagepool was not taken as a factor, and conducting Boot Time on a pagepooled ROM may also vary the results comparatively.
AND: i did this evaluation to show respect and appreciation on behalf of all others, to those members who give their precious time to this forum and bring out these patches, so that it may and does, help improve the way we can speed up and customize our elf and elfin.
And yeah, I got BSoD for the first time, when i flashed IPL 2.26 and USPL 1.17 and tried to interrupt a soft reset. This concludes what kokotas has said abt non-bootable combinations, like IPL 1.XX with SPL 2.XX or vice versa
USPL 2.28
htctouchp said:
This USPL should also work on Elf, but as i don't have an Elf, therefore it would be great if some Elf owner takes up the responsibility to test it.
Click to expand...
Click to collapse
Tested on my ELF, it works nicely. My SPL now 2.28.0000.
Will test further once AB release a new UCE ROM whether can flash without taking out the SIM card and memory card
Any chance to have IPL 2.28 too ?
Rgds
ckpv5 said:
Tested on my ELF, it works nicely. My SPL now 2.28.0000.
Will test further once AB release a new UCE ROM whether can flash without taking out the SIM card and memory card
Any chance to have IPL 2.28 too ?
Click to expand...
Click to collapse
i'm glad it works for u. i have not found IPL 2.28 as yet. however there is IPL 2.27 dumped by someone today and yet to be tested.
ayyu3m said:
Flashed a test rom with simcard and 2GB memory card inside.
hope you are very happy Aman. Good Job once again
Click to expand...
Click to collapse
yup, i'm happy if everybody else is
although i owe it greatly to cmonex who helped me to get over the problem with the original spl 2.28.
ayyu3m said:
As kokotas has stated:
IPL:2.2X.0002
SPL:1.1X.0000
NOT Bootable combination
This is the reason why i got the BsOD error as i have stated in post #26
haha! this shud make cmonex happy too. its like chain reaction. btw...see the above post as kokotas has stated, its true
Click to expand...
Click to collapse
yes, and thats probably the reason why there have been so many bricks in the past.
I just got my ATT tilt, and am new to this forum. I have been surfing around this forum and read the wiki and FAQs about flashing ROMs, unlocking etc. I don't know if I understand some of the information correctly. Here is some quick questions that puzzling me:
1. When you unlock the CID with the SuperCID program, does that unlock the SIM also? or do you need to unlock the SIM separately if you unlocked the CID?
2. For the use of service from a certain carrier, like mine is ATT right now, is it correct that only the Radio Rom version matters, while the ROM and SPL just need to be compatible with the Radio?
3. If I just want to unlock CID, and get rid of the bloatware come from ATT. can I use jockyw2001's method to unlock CID and later flash the extracted ROM , SPL and Radio back or flash the latest HTC rom and replace with the original Radio that come with my ATT tilt?
My Tilt out of box:
OS: WM 6.1 professional, 5.2.19214 (build 19214.1.0.4)
ROM version: 3.57.502.2 WWE (3.57.00.00 while doing camera+soft reset)
Radio: 1.65.21.18
The tri-color mode reads:
KAIS1*0
SPL-3.56.0000
CPLD-8
1. No, it only unlocks the CID part (hardspl).
2. Not sure what you mean, but some radios are not compatible with certain ROMs (you'll get intermittent sound and no camera picture).
3. You can always revert back.
Thanks for the quick reply.