Hi all.
After the trick with zerolenght dll and exefiles(Biotouch) I have finally disabled TF (ugly and jumpy)scrolling. I want to use PocketPlus feature named SmartScrolling,but that wasn't in the list of options,so I can't enable it. Today I found a solution:
1. Make a backup of registry key HKLM>Software>OEM>TFLOSettings
2.make sure the backup file is created and delete this key
3.install/reinstall SPB Pocket Plus
4.import registry from backup
5.make sure,that the value EnableScroll is set to 0
6.softresetdevice
Now you should see the Smart Scrolling option in PocketPlus settings,just enable it and enjoy.
Btw,if something goes wrong,I am not responsible for any software damages using this. My is working good.
I'm using 3 separate registry editors on my "T-Mobile HTC Touch Pro2" so that i can access SPB Pocket Plus 4 Smart scrolling feature. I accessed the registry editors and I tried to delete TFLOSettings folder under HKLM>Software>OEM>TFLOSettings but every time i select the delete icon it comes up with an error saying either the access is denied or the key cannot be deleted. i dont know what to do in this situation PLEASE HELP!!!
Resco registry editor
http://www.mediafire.com/i/?o12iiemmojz
phm registry editor
http://www.mediafire.com/i/?yomfymzmu52
Try to disable Manila first...
I'm not familiar with that program. since i've never heard of Manila i'm pretty sure i've never installed it to begin with.
Related
hi
i am using cLaunch with my O2 IIi, however, several shortcut like Word, Excel, Note, Explore did not work properly. Shortcut xBackup even didn't work.
For example, when i open Note in cLaunch, it quickly open a note with "21#: MSNOTETAKE". What it is? if i delete this sentence then the note.ink in Start Menu is broken and it will no longer run from Start / Program.
Please advice how to fix this and also how to fix the .ink file.
FYI, when i remove claunch and return to SPB Pocket Plus then everything is good, word, excel... run well from the SPB today plug in. Only the .ink file still broken
Thanks
Tuan
Hi,
I would like to turn off the TouchFlo scrolling feature but so far to no success. Anyone can try this for me and see whether yours can be turned off? You suppose to be able to turn it off by using software like Advanced Configuration Tool, in the TouchFlo section.
Thanks in advance.
I've done this using following trick:
- create zerolength files BioTouch.exe,BioTouch.dll and StartUpBioTouch.exe
- make a backup copy of these files from Windows folder
- using Resco Explorer copy them to Windows folder and overwrite them all
- soft reset
If you want to use SPB PocketPlus for scrolling,I have it described in this forum already,so look behind in the forum.
When i goto the Wiki to adjust some things in my ATT Fuze Registry and on/in the Wiki instead of the HKEY prefix its HKLM. Is there something that tweaks the registry with the ATT fuze? My Fuze doesnt have the HKLM prefix keys. And is there a program that i can use on my PC that can edit the registry on my phone with out having to use the tiny stylus??
Symbian_Black said:
When i goto the Wiki to adjust some things in my ATT Fuze Registry and on/in the Wiki instead of the HKEY prefix its HKLM. Is there something that tweaks the registry with the ATT fuze? My Fuze doesnt have the HKLM prefix keys. And is there a program that i can use on my PC that can edit the registry on my phone with out having to use the tiny stylus??
Click to expand...
Click to collapse
HKLM= H Key Local machine
It is just an abbreviation that is used by some registry programs and such.
There are programs that can apply some of the commonly used tweaks. You can search the forum for advanced config.
Symbian_Black said:
And is there a program that i can use on my PC that can edit the registry on my phone with out having to use the tiny stylus??
Click to expand...
Click to collapse
http://mobile-registry-editor.en.softonic.com/pocketpc
I used that whenever I made registry entries. It's a pretty good program thats extremely lightweight and gives you access to everything in the registry so you can edit it from your pc. Just connect with activesync. Just make sure you either make a backup or you know exactly what you're changing before you change it
also as a side note, some registry changes don't stick after a soft reset. If thats the case (happens when editing the registry for something thats open) power off your device by holding down the power button and reboot.
Access Fuze Registry
I am being denied access to my Fuze Registry using Mobile Registry Editor. When I try to delete a registry, it says that access is denied. I did not have this problem with my Tilt. Am I missing something?
Access denied issue
Your fuze and tilte both usually lock the registry in an attempt to prevent harmful changes when deleting or modifying certain values. But the solution is to use an internal registry editor or some other registry editor. such as the one that comes with pocket controller, if you have the cash haha, internal editing can be done with resco explorer's registry add in, again if you have the cash, but these tools are invaluable when editing your device to your preferences.
Hello all,
Been doing as much reading as possible trying to figure out what I am sure is an obvious in my face answer. I am trying to use Resco Explorer to make a couple changes but i can not locate HKLM in order to;
Go to HKLM/Software/Samsung/JINBOX and set "ThreadedViewDisabled" from 0 to 1.
I have Resco 2010 with the addins. I understand this to be "the" program to use. But I can't find a "dummies" how to use it...
Any help would be appreciated.
Resco Explorer
Hi Iam trying to find KKLM software in resco explorer.
Does anyone know how I find this ?
There's no such thing like KKLM in Windoze, unless you create a folder named like this.
Maybe you mean HKLM and you can find it in the registry...but you need to have a registry editor installed (in Resco's case, the registry add-on).
If you have installed the registry add-on, follow these steps:
Tap the 'up' button multiple times until you reach the end.
There, you can see something like 'registry'.
Tap it, tap HKEY Local Machine, tap Software, etc.
thank you
PIE is working and connects through whatever means however it's not the same for quickgps. Even when there's no connection running it won't even try to start a GPRS connection. Forget activesync and wifi it's the same story. Assistance please
Make sure the quick gps service is running-it's launched by bootlauncher, and most task managers don't register it. XTask will show if it's working.
Nope, service is not running. What now?
You need this registry key.
Code:
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\HTC\BootLauncher\Services\QuickGPS]
"Index"=dword:00000000
"Info"=dword:00000000
"Module"="\\windows\\GPSAux.dll"
"Order"=dword:000000ff
"Prefix"="GUX"
Pour favour, could you place all that into a REG file for me? I'm trying to input the values but the only ones I'm sure I got are "Module" and "Prefix".
Just cut-and-paste the full code I posted (inc. the Windows Registry editor bit) into a text file. You can do it on a pc or your ppc. Then change the file extension to .reg, and import the key with a registry editor like dotfred's task manager or phm regedit.
Imported the key and soft resetted. Confirmed that the service is NOT running as per the registry entry. However, I found a "QuickGPS app service(GUX0" running with most of the settings you gave me there in the registry.
2 differences:
- it's described as "dll for icon in TodayScreen" (yes, it's bull, i know)
- and entry called "Keep=dword:00000001"
help... still nothing
Well a hard reset worked and am gonna backup all QuickGPS related registry keys, but I really doubt that it's that simple. If this problem comes again I'll likely have to do this again.
Watch this space.