Database Info

Anyone with Helmi Cooked Rom able to connect their Blackberry Connect?

I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)

yep
Yes am running the helmi rom myself and all is working well. Check which version of the BB client you have installed, perhaps that is a possible reason.
But works well with the vario III model and said rom installed...

I'm using the newest version 41.0.0.84 posted on HTC site. What version is yours? Did you flash a Hard SPL? or a SSPL? before flashing to the Helmi Cooked Rom?

paulesport said:
I am using the Helmi Cooked Rom and I installed the BBConnect onto my Tilt and the PC desktop software and I can't seem to generate a Pin on my Tilt because it cannot get connected. Any one able to help? (I have the BB plan)
Click to expand...
Click to collapse
Change the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU
and it should be fine.

I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?

paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
I too am interested in a solution...

paulesport said:
I changed the AKU version and still it shows Data Tunnel Available for half a second and says Disconnected. Anyone know a step by step fix for this?
Click to expand...
Click to collapse
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.

w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
Followed these instructions after a hard reset and still no luck. I have the same problem as the others, after step 5 it would connect for a second or so, and then disconnect. So it was back to the HTC Rom.

Sometimes the rom needs to be Hex edited to show that its AKU 4.2 I am sure if you ask Hemli he might do this for you in a future release. I am sorry to say but this is one of those issues that some have beening that the roms we have on this forum have not been made for public release since the 3rd party software has not been properly set up to run with it.

tytn II
Hi all orange uk are releasing tytn II with BB connect version 91
get it here but if you want to use internet explorer you need to edit the registry to disable the proxy for autho connect
if you ahve a look atthe following post it wxplains all
steven
http://sems.org/content/download/bbc4/BBConnect_WM6_Professional_BB_4.0.0.91.cab
also
http://www.sems.org/entry.asp?ENTRY_ID=248
steven
i also found that you have to register the sim card number and imei number in the network i is bb way of protecting licence
i got an upgrade but did not register new sim just used old sim would not work but still worked on old phone eventually spoke to level two in orange and they registered new sim it worked
it is bb s way of proyecting licence
steven
any problems let me know

w01f said:
The method described above (chaging AKU version) does actually work!
This is what I did:
1. Installed the latest clean cooked rom (CE OS 5.2.1978)
2. Installed Resco Explorer for the registry editor
3. Changed the AKU version from 0.7.0 to 0.4.2 under HKLM>System>Version>AKU (The key difference here is that this change was made before installing BB Connect)
4. Installed BBC v4.0.0.84
5. To configure BBC I used the BlackBerry Connect Desktop for Windows Mobile app which communicated with my work servers and then configured the device for me.
Hope that helps others in the same situation as me.
Click to expand...
Click to collapse
I can confirm that these instructions do work with Duttys hybrid no.3 ROM. The only difference is that I installed BBC V4.0.91 version mentioned in this thread.

By the way thank you KarmaNP it did work. I went back to check on what I entered and had too many periods (.)'s when changing the AKU. Make sure that 0.4.2 shows and not .0.4.2 which was my mistake.

XDA Zinc reflash help

Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA

hi
have you downloaded the official rom from seeo2? ... i think u can just plug ur usb via activesync & just execute the official rom exe
hopefully this will help

hayova said:
Hello all!
I have Zinc allways with screen just like this
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
pleas plug-in usb cable...
I tried soft and hard reset and no effect.
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD.
But after insterting card and restarting nothing happens
How i can install new rom?
TIA
Click to expand...
Click to collapse
I have seem problem with hayova when I try to upgrade new WM6 rom that downloaded form seeO2.
And I try this way
mazi_v said:
************************************************** **********************************************
if your rom crashed and your devise still in eboot page and waiting for downloading disk image now you gona give it
but a little problem....you need another of any kind ppc that just activesync can recognize it..any wm or hd .....
and also you need ollydbg software.its a debuger.....
steps
0) run ollydbg and load the rom upgrade file in ollydbg
1) plug the healthy ppc to your desktop via usb activesync v4.5
2) make a text file in your desktop and name it DeviceSpy and set it attribte to read only
2) transfer it to \windows dir in healthy ppc...
4) change the suffix from .txt to .exe by resco explorer or any other file explorer now you have DeviceSpy.exe
check it attribute and be sure its readonly...
5) press f9 and zinc upgrader will run...it suppose to installer ignore the differ
6) tap all ok or next buttons and in dialogbox with update button beware
7) most important section : tap update button and eminently click on ollydbg title bar to make it active window
and watch the activesync icone .it quickly will chang and make activesynk disconnect and you have to hear
a notification tone and ppc will restart...
8) quickly press f12 to break ollydbg process then unplug healthy ppc and plug your zinc and wait for notification tone
9) press f9 and enjoy the new rom....
that healthy ppc is still healthy but your dead zinc now is alive...
Click to expand...
Click to collapse
But not success.
Now my Zinc is in black screen and red light when I connect to PC.
Can anyone help me ? My Zinc is dead. (

do not use olydb
just when the healthy ppc restarted replace it with zick quickly.

use a dos app instead of text file and rename it to devicespy.exe with readonly
attre..

What if I dont have another PPC???
I am going thru the very same problem...
What if I do not have another healthy PPC???
Also, will the settings be the same if I am using a Windows Mobile Device Center rather than a ActiveSync 4.5???
Please help me out with this Zinc issue!!!!

liunx and windows mobile 6.1

hey everybody
i have a question...
is there a possebilety to install and run windows mobile AND a linux version for pocket pc at the pocket pc?
because i have some programms that only run on linux for pocket pc and i want to use them on my pda!
or is there another way to do that?
is there a programm that simulates linux so i can execute linuz programs?
i have a htc wizard with windows mobile 6.1
thanks guys

check out the liniwizard Project

linwizard rocks. They guys are putting alot of effort behind the project. Try the gizard release which includes a Window Manager. Only thing they dont quite have is Orientation ons keyboard slide in/out. They even have a working gsm package

hmm got any link ?, im running version 2 from SourceForge which stucks at startx

hey
so when i want to start it the same happenes...so i tried simpleos
is that linux too?
do you nknow a good running version bacause mine is has a error because it is out of memory very ofetn...

its not linux..but kinda yes..its coded in C# and its a diff aplication
like i said im running the second version..which rins..but gives an awful GUI with startX

@ Anther
I cant paste a link here to the adress for the gizard package cuz for some reason opera mini doesnt support cut/copy and paste but the site is true-binary.com and check on page 23 it has the link. I had tried gizard but its too plain n not enough eyecandy but still its a step in the right direction out of windows.

ah thanks alot
btw its Ather

her is the link for others, even though it was just a search away
http://www.true-binary.com/?s=gizard

No prob and sorry about the name another draw back of using opera mini but still better than alot of other options.

no probs
as fot the gizard, it didnt start..just stuck on a black screen after typing "startx"

ather90 said:
no probs
as fot the gizard, it didnt start..just stuck on a black screen after typing "startx"
Click to expand...
Click to collapse
On an M2D enabled rom with very little freespace ? Mine worked perfectly

hmm, im using the [ Final Released : 09 NOV08 ] CR86 Touch HD [ Version 0.3 ] [ Build-In Manila] ROM atm, and it wont boot, im still waiting for the PM from u

Esmertec Jbed Install on SD

I've modified the cabs of Jbed from this post, so it can run from SD and install all jar there.
You no longer have to waste space on device, making it possible to have unlimited number of games-apps installed. After flash you have to install only the cab file and you can have all your favorite games-apps that were installed, running from the SD.
I've made the last 3 version run from SD. 20081203.2.1 didn't run a lot of games... maybe 3d drivers issue? dont know... 20080912.5.1 works very good and supports touch screen enabled games, so it's recommended... 20090217.5.1R2 not tested yet.
If your ROM has build in a java version that you like, or if you want to install later a newer version, no worries, you can have them all installed at the same time and all working! java app from device will read the jars installed on SD.
Many thanx to Aqrab for the original releases.
Edit 14/8/2009:
Added Esmertec Jbed 20090217.5.1R2 SD
as requested, plz test and report back ty.

Nice one!
Thanks for this, I'll have a test of it now

K0mmaT1A said:
I've modified the cabs of Jbed from this post, so it can run from SD and install all jar there.
You no longer have to waste space on device, making it possible to have unlimited number of games-apps installed. After flash you have to install only the cab file and you can have all your favorite games-apps that were installed, running from the SD.
I've made the last 2 version run from SD, because 20081203.2.1 didn't run a lot of games... maybe 3d drivers issue? dont know... 20080912.5.1 works very good and supports touch screen enabled games, so it's recommended...
If your ROM has build in a java version that you like, or if you want to install later a newer version, no worries, you can have them all installed at the same time and all working! java app from device will read the jars installed on SD.
Click to expand...
Click to collapse
I installed "Esmertec Jbed 20080912.5.1 SD.zip" After Hard Reset, Very Good Working. It was very important for me. Thank you very much.

Doesn't work
Hi!
I'v tried this two versions,but them doesn't work.
I'v tried on ASUS P525 pda windows mobile 5.
The programs doesn't start when I want to start it write that (the 'jbed' file can't open....)
ÁDÁM

feinadam said:
Hi!
I'v tried this two versions,but them doesn't work.
I'v tried on ASUS P525 pda windows mobile 5.
The programs doesn't start when I want to start it write that (the 'jbed' file can't open....)
ÁDÁM
Click to expand...
Click to collapse
Try installing a non SD version first (from the link in first post) and make sure you can run jbed, then try the SD version, try hard reseting before running too.
If you can't run anyone, see troubleshooter in official jbed site.
regards

K0mmaT1A said:
Try installing a non SD version first (from the link in first post) and make sure you can run jbed, then try the SD version, try hard reseting before running too.
If you can't run anyone, see troubleshooter in official jbed site.
regards
Click to expand...
Click to collapse
I'v done that you wrote.But 1 version has the"unknown" problem,another doesn't start, one strart and with this the games are starting but I have problem with the buttons.(when I use the buttons(1,2,3..9)I press some button once but the game feel like I Press constantly)
In build 20081203.2.1 this "direction keys bug is fixed but there are problems with many games.
THX!

It looks like it's device specific problem..
You should put on your signature your device information or post them first, so someone with your device could help you out.

Im having a problem on my htc blue angel, the hardware buttons that supposed to work as soft keys witch are calendar and contacts arnt working, when i press this keys they open up there pre define programs i.e contacts calendar, when i disable this keys programs so they dont open contacts/calendar the java manager stills does nothing i stay stuck at the screen were its says "do you want sounds yes or no", ive been draging this problem since many versions before this one, thats why i cant enjoy java on my phone witch sucks cause i love to play games on my device, can anyone inlight me on a posible solution??

rafyvitto said:
Im having a problem on my htc blue angel, the hardware buttons that supposed to work as soft keys witch are calendar and contacts arnt working, when i press this keys they open up there pre define programs i.e contacts calendar, when i disable this keys programs so they dont open contacts/calendar the java manager stills does nothing i stay stuck at the screen were its says "do you want sounds yes or no", ive been draging this problem since many versions before this one, thats why i cant enjoy java on my phone witch sucks cause i love to play games on my device, can anyone inlight me on a posible solution??
Click to expand...
Click to collapse
hehe that's not even a problem
go to settings -> buttons and set the coresponding buttons to <left Softkey> and right...

WiFi connection light
Sorry to bring this on but this is a bit annoying. After launching Java from Esmertec Jbed 20080912.5.1 (installed on SD card) the blue diode (HP IPAQ 210) for WiFi connection turning off. Internet access is OK but diode is off. Any suggestions?

Hi
I installed 20081203.2.1 SD version on Samsung Omnia and work nice.
thanks dear K0mmaT1A

where exactly is the succesfully installed .jar file is being put by jbed on my storage card?
cos i cant (dont know how) find them? i just want to make sure that it was already installed on my SDcard instead of device ram, so i can install another .jar file..
thx

It should be under appdb folder.

K0mmaT1A said:
I've modified the cabs of Jbed from this post, so it can run from SD and install all jar there.
You no longer have to waste space on device, making it possible to have unlimited number of games-apps installed. After flash you have to install only the cab file and you can have all your favorite games-apps that were installed, running from the SD.
I've made the last 2 version run from SD, because 20081203.2.1 didn't run a lot of games... maybe 3d drivers issue? dont know... 20080912.5.1 works very good and supports touch screen enabled games, so it's recommended...
If your ROM has build in a java version that you like, or if you want to install later a newer version, no worries, you can have them all installed at the same time and all working! java app from device will read the jars installed on SD.
Click to expand...
Click to collapse
Hi. I use Esmertec JBed 20080912.5.1, maked by You, and think it's great job!!
But i saw last time newest wersion Jbed 20090217.5.1, but only to install on My Memory :/
Try make this installable on StorageCard...??

need help
hello guys, new to this forum.. i tried to download this sd version of jbed, but when i am on the first page of the thread, i am no longer logged in.? im back logged in on the second page, but not when i go back to the first.. consequently, i cant download the file.. when i do it brings me to a login screen and runs in a sort of a loop.. i log in, it says thanks and brings me to the login screen.. help?
thanks jay..

nevermind
nevermind, i figured it out

If problem will be back, write here. Send you on email or hosting serwer
Esmertec Jbed 20080912.5.1 SD.zip

Works fantastic on Asus P750 with Gmail 2.0.6 & Opera Mini 4.2! Thank you very much!

Hi,
as newer jbed is released, can you make a new one to be able installed on storage card?
or does anyone know how to change the cab so that I can change the newer jbed to be able installed on storage?
once i succeed, i'll post to this thread.
And, is everyone has sound enabled when using jbed?
cause mine dont have any sound. i'm using BlueAngel.
Thx

Esmertec Jbed 20090217.5.1R2 SD
Added Esmertec Jbed 20090217.5.1R2 SD in first post.
Try and report if all is working good. I'll try myself all basic apps when I'll have time...

OFFICIAL SENSE ROM FOR G2 Singapore 32A

http://www.htc.com/sea/SupportViewNews.aspx?dl_id=755&news_id=338
32A only every 32A machine can upgrade to this rom with a gold card!
This software is suitable for the following devices : HTC Magic
ROM Upgrade with HTC Sense for HTC Magic (For Singapore Only)
Release Date: 2009-11-10
An updated ROM is now available for HTC Magic customers to download. As always, HTC is committed to providing customers with the best possible mobile experience.
Installation Instructions:
ROM Version: 3.03.707.5( For Singapore only)
Improved Functions
This ROM Upgrade for your HTC Magic will let you experience HTC SenseTM on your phone. HTC SenseTM lets you be you with scenes and widgets, you can customize your experience to be any way you like. Discover intuitive experiences that make everything you do on your phone effortless and delightful.
Notice:
1. There are two steps for the RUU:
* First step will upgrade three programs (At the end of this step the screen will show “Boot-Fail” about 5 seconds, and this is the normal scenario, please let the Magic keep running to second step.)
* Second Step will continue updating 5 programs, and it will spend around 10 minutes for the whole upgrade process, please be patient for the upgrade.
2. This is a generic software update. Any additional software or settings provided by your mobile operator or company will be lost. If you require this customization, please contact your supplier first before upgrading.
Please note that this upgrade will erase any data stored on the phone. We recommend that you back up all your data before performing this upgrade.
3. The update will take up to 10 minutes, DO NOT interrupt the update process, make/receive phone calls, disconnect the phone from the PC, or press any buttons until the process has been completed.
1. Hardware Requirements (PC)
1 GHz or higher processor clock speed recommended
512 MB of RAM or higher recommended
Super VGA (800 x 600) or higher-resolution video adapter and monitor
150 MB of available free hard disk space
USB 2.0 is required
2. Software Requirements - Supported Operating Systems (PC)
Windows XP Home Edition Service Pack 2
Windows XP Professional Edition Service Pack 2
Windows XP Media Center Edition Service Pack 2
Microsoft Windows Vista Ultimate Edition
Microsoft Windows Vista Enterprise Edition
Microsoft Windows Vista Business Edition
Microsoft Windows Vista Home Premium Edition
Microsoft Windows Vista Home Basic Edition
3. Installation Instructions
Before you proceed the ROM Update Utility (RUU), please confirm the following items:
(1) This software upgrade is a newer version than what is currently installed on your phone. If it is the same version and your phone is operating normally, there is no need to reinstall the software.
To check what version is installed on your phone, press Home > Menu > Settings > About phone > Build number, and note the Build number.
(2) HTC Sync has been installed on your PC. HTC Sync can be found on the MicroSD card that was shipped with your phone. You can also download and install HTC Sync at www.htc.com/www/support/
(3) Your phone is connected to your PC using a USB cable. The PC must recognize your phone. You will see a sync icon HTC Sync Icon.bmp in the taskbar once the phone has been connected.
(4) Standby and hibernation mode on your PC has been disabled.
(5) Close all running applications on the PC.
(6) The Screen unlock pattern has been disabled, press Home > Menu > Settings > Security and uncheck Require pattern
(7) Make sure that the battery level of the phone is at least 30% (at least 3 green blocks). To check the battery level, tap Home > Menu > Settings > About phone > Status > Battery level.
(8) Once the RUU is downloaded, launch the application on your PC and follow the instructions on screen.
* Click View Readme when executing the ROM Upgrade Utility (RUU) to view detailed upgrade procedure, error message information or Q&A.
downloading

Great news!

somebody share the Serial Number?

imfool said:
somebody share the Serial Number?
Click to expand...
Click to collapse
Singapore G2
SN :HT96LKF04408

Is it Cupcake 1.5 or Donut 1.6?

Cupcake 1.5

cadetnudt said:
Cupcake 1.5
Click to expand...
Click to collapse
u flashed it already or u r speaking the taiwan rom? My notebook is running win7 and the ruu gets always 170 error, need go to office tomorrow to try this rom.

themaskfly said:
u flashed it already or u r speaking the taiwan rom? My notebook is running win7 and the ruu gets always 170 error, need go to office tomorrow to try this rom.
Click to expand...
Click to collapse
Same for me, HTC Magic but on Vista... doesn't work

downloading... hope my malaysian magic can b updated...

The ROM is understandably pretty much identical to the Taiwanese, except for the obvious changes (and some not so obvious, like some apps and widgets missing - Plurk or Stocks, for example).
Oh, and it also of course contains the same perfected SPL, so...think about it before updating.

Can I use this rom on Polish HTC Magic, will i still have polish language in my android?

dirt77 said:
Can I use this rom on Polish HTC Magic, will i still have polish language in my android?
Click to expand...
Click to collapse
Nope, this works on Singapore magic only

This is for 32A i suppose...

Thanks a lot guys! Just wanna know, does this update include all the Google services?
Especially the Market?

Case_ said:
The ROM is understandably pretty much identical to the Taiwanese, except for the obvious changes (and some not so obvious, like some apps and widgets missing - Plurk or Stocks, for example).
Oh, and it also of course contains the same perfected SPL, so...think about it before updating.
Click to expand...
Click to collapse
How to deal with the SPL？

samhain937 said:
Thanks a lot guys! Just wanna know, does this update include all the Google services?
Especially the Market?
Click to expand...
Click to collapse
yes i see market inside. however i can't find ebuddy on the market...

can i use it for 32b

funnycow said:
yes i see market inside. however i can't find ebuddy on the market...
Click to expand...
Click to collapse
can you tell if this is for 32b or 32a

It's for 32A... My Magic is from singapore and I'm able to download the update... I used the serial of my magic and I was able to download it... So, I think this might work for me right??? I'm downloading this right now...
Can anybody tell me if it's secure to install it???
Remember that I'm able to download the rom with the serial number of my magic...

:No-Frost: said:
It's for 32A... My Magic is from singapore and I'm able to download the update... I used the serial of my magic and I was able to download it... So, I think this might work for me right??? I'm downloading this right now...
Can anybody tell me if it's secure to install it???
Remember that I'm able to download the rom with the serial number of my magic...
Click to expand...
Click to collapse
that's mean i can't use it for 32b