Database Info

PANIC - plz help

I finally got the nerves to put the new radio and rom version on my HTC Touch pro.
It went wrong at 1%, and the recovery option was in a loop.
So I did exit the process after recovering/restarting like 12 times.
It did exit on a 262 error at 0% or 1%...
Ok let’s try one other rom; now I did first run the HardSPL Unsigned 190.1.3 again as advised before every rom update, and it was successful...
But when booting the phone it is stuck at the black TOUCHpro screen with the following red text at the right bottom.
R 1.02.25.19
G 52.33.25.17U
D 1.90.00.00
Now whatever I try, whatever rom version I use, it always tells me the phone is not connected by USB.
Seems like the USB driver or something is not loaded at this stage. Maybe when by some key combination I get the phone in the ROM/Boot loading menu I can try other rom version. But I could be completely on the wrong track here.
I was so happy with my WM6 phone, please help me so I can enjoy my phone again, hopefully not with the old rom and radio ofc, when possible.

Don't panic!
Put a the NBH file of the rom you want to flash on your storage card and rename it to RAPHIMG.NBH. Start the bootloader (reset and keep pressing the volume down button) and follow the directions on the screen. When it sais it flashed succesful reset again.
Of course this only work if you did install the hardspl...
Good luck,
Cheers,
Cacti

Ok found that when I go in bootloader mode manually by pressing the Volume-down and reset button at the same time it can connect to my PC.
But no matter what rom version I try, original, Stock or custom it stops at 0% or 1% .. Giving me any of these errors :
readme.doc said:
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
Click to expand...
Click to collapse
Plz help me, I am using the original USB cable and did try a general one, no-USB hub, did remove my firewall/virus scanner software and all.

Put the NBH file on you storage card and rename it. Don't use rhe RUU...

Thanks le_cactus, the above message crossed yours..
I will try getting the new rom trough my MicroSD card, good thing I have no regular Diamond..

Diamond?
This is the HTC Touch Pro forum

Yhea I know, I have the TouchPro... aka as the Professional version of the HTC Diamond in the Netherlands.
Raphael is rarely used here, only by people who are into rom's and TF3D hacks and stuff...
Damn my CF/MD adapter does not seem to work, or my card reader, printer with card reader and my iPaq don't support 8GB cards..
Guess I have to go to the shop tomorrow for a smaller card with a new adapter or a card reader that accepts MicroSD to get my phone back to order.
Thanks for your advice and cooling down my panic moment.. "Bedankt !!!"

Thanks man for 14 euro's I did buy me a card-reader that is able to handle my 8GB microSD card and my problem is solved. Running on 405.3 with latest .28 radio drivers now.

[TUT] Flashing and Unbricking your Maple

Welcome! Almost everyone has done it. Bad flash and suddenly your $400 device is a paper weight! Woaaaaaah! Even I have to admit I have done it, many times. But there is hope! Read on.
It is not easy to brick a device if you actually read and follow all of the steps and guidelines before a flash. In fact, not many things can go wrong unless a USB cables disconnects during a flash, your PC crashes in the middle of a flash, or you flash a corrupt image file to your device. Statistically, most of the time people only think their device is "bricked" when actually it's not.
There are currently three methods you can use depending of the severity of the "bricking". The first method will unbrick 50% of all Maples that have simply "locked up" and won't reboot properly. The second method will unbrick 95% of all Maples that encountered flashing problems or flash failures.
** Please perform these steps and methods at your own risk. I am not responsible for any damage you cause your device using this guide.
If you're new to the Maple or SmartPhones in general, please take the time to read the the forums for valuable info before you post or try any of these steps.
But, before I even get into unbricking, if your phone is in fact working right now, I highly recommend you flash HardSPL by JockyW to avoid even having to follow these steps anytime in the future. The steps and info for HardSPL and JumpSPL can be found in this thread by jockyw2001.
HardSPL basically flashes your phone with an "unlocked" security partition so all security checks are bypassed when you try to flash a cooked ROM or a ROM designed for another variation of the Maple such as HTC (SNAP), TMO Dash3G, etc. Makes life much easier when trying different ROMS or cooking and testing your own! Thanks to jockyw2001!!
Ok, so onto the fun stuff...
Flashing:
First a bit of background and info on the different types of ROM images. There are a few different types of ROMS. Carrier released "signed" ROMS, carrier "signed" TEST ROMS, and custom "unsigned" cooked ROMS. The first two are usually released by the carrier (HTC, TMO, AT&T, VOD, etc.). These carrier "signed" ROMS can be flashed anytime without any modifications to the bootloader, SPL, or the device itself. The device already has security checks and certificates in place to check the ROM you are trying to flash to make sure it is official. They do this to avoid users from sending back their "bricked" devices after a failed flash or just user error. This applies to TEST ROMS as well however, TEST ROMS are for just that, TESTING. They usually have an expiration date or "timebomb" applied when the testing period has expired. Cooked ROMS, on the other hand, require unlocking the security checks of the bootloader (SPL) in order to flash successfully. This clarify, this method has several names and is also called CID unlocking, JumpSPL/SSPL (temporarily bypass security checks), HardSPL (permanently bypass security checks), and CID bypassing. Here are the steps to a happy user and a successful flash:
Remove your SD Card
If your device is already hardSPL, proceed to step 10
If using JumpSPL, boot your device up to your homescreen
Download and unzip the ROM package file
If flashing a custom cooked ROM, run auto.bat, or auto_1.17.bat, or auto_1.19.bat (depending on your SPL version)
Follow the prompts in the DOS window
Hit "continue" (trackball button) on your phone, screen will turn black
Run RomUpdateUtility.exe (if it doesn't run via the script)
The flash will take about 5 minutes
If your device is already HardSPL, simply run RomUpdateUtility.exe and follow the prompts
Upon first boot, it will seem frozen for a few minutes, maybe even go black. This is NORMAL!
Enjoy!
Unbricking:
Your phone won't boot... Either it's locked up and simply stopped booting or you flashed your phone and it won't boot. What do you do??
Method 1: Assuming you didn't get "bricked" from a flash problem, the first and easiest method for "unbricking" your device is (this will erase ALL data on your device):
(This method works for 50% of supposedly "bricked" devices)
Remove your SIM and SD card
Remove and reinsert your battery
While holding the volume UP key, press the power button
Continue holding the volume UP key until a black screen appears saying "This operation will delete all your..."
Press "'send"' to restore to hard reset your phone
Let the phone cold boot and restore
That didn't work!! . This next method will reflash your phone to the factory ROM.
Method 2: Second way to the path of unbricking is:
(This method will unbrick 95% of all Maples)
Get a hold of your Shipped ROM. You can find these ROMS either on HTC's site (with a valid serial #), TMO's site (http://www.t-mobile.com/wmupgrade/ with a valid IMEI), or right here at XDA Developers (search for it).
Download one of the factory ROMS and unpack it. **Remember, if your phone is a TMO Dash3G, you MUST use a TMO Dash3G ROM. If your phone is HTC Branded, you MUST use an HTC ROM, etc., etc., etc...
Remove the SD card if one is inserted in the phone
Remove the battery from your phone for a few seconds. I found this step to be essential to reset the device. Put the battery back in.
While holding volume DOWN button, press the power button. The phone will enter "bootloader" mode and you will see a tricolor bootscreen.
While in this mode, plug in your USB cable and you will hear the "ba-bing" USB sounds as the device connects
Unpack the ROM package you just downloaded and run RomUpdateUtility.exe. Follow the steps, check the appropriate boxes, and start the flash
Assuming all goes well, your phone will flash to the factory ROM and you can then troubleshoot what went wrong the first time that bricked your phone.
Method 3: The "goldcard" final method is a bit more intensive so follow closely:
(This method will unbrick 99% of all Maples regardless of branding)
Get a cup of coffee or tea
You will need a working Donor HTC device with a microSD slot and a microSD card that is smaller than 1GB (will be formatted) to create "goldcard" image using QMAT tools as described below
You will need QMAT. Get it from http://revskills.de/index.html.
Go to the Download Link and download the latest version and unpack QMAT
Have some coffee
Use a SD card reader in your PC to access the SD card through Windows. Format the SD card with FAT32.
* Insert the SD card into the donor HTC device and connect the USB cable. If you unchecked "Allow USB Connections" in Activesync in an earlier step, make sure you recheck it so that you can establish a full USB sync connection to the HTC device.
Open QMAT and go to the "Hardware Forecsics" (version 5.04 and below) or "Calculators/Generators" (version 5.05 and up) menu and select "Generate HTC Goldcard"
In "Select device key:" select the Maple
You will need the serial number from the SD card so click the "Get SD Card Serial from WINCE Device" button
Once the Serial number appears in the box, click the "Save Goldcard Image to WINCE SD" button below
If no errors pop up and all goes well, proceed to these next steps
If you get an error or a popup saying "Goldcard for newer devices isn't implemented in newer devices", you must buy and register the software. Believe me, it's worth the small amount of $ you will spend to bring your expensive device back to life!
Now remove the SD card with the newly written Goldcard image from the Donor HTC device
Insert the SD card back into your PC using the microSD card reader adapter. Browse to the drive letter assigned to it. You will see no files on the SD card, this is normal.
(If, for some reason your PC sees the SD card as unformatted, something went wrong. Remove it and reinsert it into the Donor HTC device. The device should see the card as unformatted and ask you to format it, say yes. Now go back to the "* Insert the SD card into the donor HTC device" step above and repeat the steps)
Unpack your HTC, T-Mobile, or other factory ROM and copy RUU_Signed.nbh to the SD card. Once it had finished copying, rename the file to MAPLIMG.nbh. Remove the SD card from the PC.
Make sure the Maple is off and insert the SD card
Enter bootloader mode as mentioned earlier (hold the volume down button while pressing the power button)
You will see a gray screen that says "loading". It will then find the MAPLIMG.nbh file and ask if you would like to start the update process. Follow the instructions and let the phone flash.
You can also do the update using the Rom Update Utility with the USB cable if you like
It will take 10 mins but your phone should boot fine and be back in action!
QMAT is a VERY powerful tool written by viperbjk that allows for full low level manipulation of HTC and WINCE tasks. Read all about it here http://revskills.de/index.html.
Many thanks to jockyw2001 for his amazing HTC device knowledge! Also thanks to all who contributed to this post.
Hope this tutorial helps!

great tuto!!! thanks thanks
it's all clear now.

Is there a factory rom for the HTC Ozone on VZW? I cannot locate it on this site nor HTC's nor VZW's.
Thanks

WOW
This helped me a lot
Method 2: Second way to the path of unbricking is:
Thanks you very much

87vert said:
Is there a factory rom for the HTC Ozone on VZW? I cannot locate it on this site nor HTC's nor VZW's.
Thanks
Click to expand...
Click to collapse
No factory ROM updates available yet.

I seem to lose internet access when i do this..
I seem to lose internet access when i do this..

http://www.htc.com/us/SupportDownload.aspx?p_id=257&cat=0&dl_id=684
Saw this in the main thread. Is it possible to get the signed stock rom for an S511 from this?
New to the winmo modding thing, so excuse me if I'm an idiot.

No signed ROM available at this time.

Kind of figured as much. So, I guess the next question is, once you have HardSPL applied, if the rom flash fails, can you recover with any rom?
I want to load 6.5, I'm a bit apprehensive though, because the 6.1 update for the Ace locked up mid-flash, and bricked the phone. My company's IT department is...sluggish when it comes to replacing dead phones.

No, you can only recover with a signed ROM intended for the device. Not a cooked ROM.

amirthanto said:
This helped me a lot
Method 2: Second way to the path of unbricking is:
Thanks you very much
Click to expand...
Click to collapse
hi, can you tell me how you managed to get the shipped signed rom? i am scratching my head and pulling my hairs over this. thanks alot!

my bro helped me to flash the hspl by jock the other day, however, he failed to notice it was only for willow snap s511 and not for maple. (confusion btwn the htc SNAPS) now what i have is a only phone that keeps rebooting at 'smart mobility' and then resets itself back to the same screen after showing some red codes at the bottom right.
I have tried your unbricking method 1,2 but I cant find a donor so no go for 3. I have done a hard reset but to no avail and am able to bootload. below are the details. is there a way to rescue it? really appreciate any help rendered. i did not managed to find a shipped rom but i heard from gawain that you can flash a rom from sdcard? my set is htc snap s526 from singapore though. =(
MAP110
SPL-1.19.0000
MicroP-Maple(LED)v6
ENGID 0x2
PCBID 0X90
PanelInfo 15-0x2

UGGGHH
I can't believe how complicated this has turned out to be.
I've read and re-read the posts, and other posts to be sure. I've even flashed a MotoQ before.
I don't know if it's Verizon or what, but my Ozone will only boot up to the HTC loading image and thats it.
I can get into bootloader and it looks like the HARDSDL is installed, and I even can start the ROM Utility, but it just shows 0% forever and then errors out about communication problem.
I'm so frustrated.

Delacombo said:
I can't believe how complicated this has turned out to be.
I've read and re-read the posts, and other posts to be sure. I've even flashed a MotoQ before.
I don't know if it's Verizon or what, but my Ozone will only boot up to the HTC loading image and thats it.
I can get into bootloader and it looks like the HARDSDL is installed, and I even can start the ROM Utility, but it just shows 0% forever and then errors out about communication problem.
I'm so frustrated.
Click to expand...
Click to collapse
try the sd method with an original shipped rom....
http://forum.xda-developers.com/showpost.php?p=4872255&postcount=78

Same problem here. Even tried tried what ibanyard said. It loaded up and went 100 percent but then said Error (294) Invalid Vendor ID. I also noticed that my windows moblie/active sync is disconecting.

Unbricking HTC snap (Sprint)
Hi can you give step by step instructions on how to unbrick a HTC Snap, I never flashed anything on it. but recently it started acting weird and so i turned it off and turned it back on, but when i powered it on it came up to the screen where it just says "htc Snap" and its stuck there
help!
*UPDATE* I found out that this issue is addressed by HTC with a hotfix I will try that and if it doesnt work come back here

I think I've bricked my Snap as well after a failed ROM update (flashing stopped at around 98%). The phone stays on the HTC logo screen and doesn't continue with the boot. I'm able to put it on bootloader mode but when running the ROM update it always stays at 0%. The Sprint "hotfix" doesn't take care of this either. When I run the ROM update utility there is no Image Version being reported by the phone at all. I've also tried to update using the miniSD card but all I get is "No image file found".
Anyone had any experience/luck taking a phone in this state into the Sprint (or whichever) store and ask them to fix/reflash it?

technosavviest said:
my bro helped me to flash the hspl by jock the other day, however, he failed to notice it was only for willow snap s511 and not for maple. (confusion btwn the htc SNAPS) now what i have is a only phone that keeps rebooting at 'smart mobility' and then resets itself back to the same screen after showing some red codes at the bottom right.
I have tried your unbricking method 1,2 but I cant find a donor so no go for 3. I have done a hard reset but to no avail and am able to bootload. below are the details. is there a way to rescue it? really appreciate any help rendered. i did not managed to find a shipped rom but i heard from gawain that you can flash a rom from sdcard? my set is htc snap s526 from singapore though. =(
MAP110
SPL-1.19.0000
MicroP-Maple(LED)v6
ENGID 0x2
PCBID 0X90
PanelInfo 15-0x2
Click to expand...
Click to collapse
I have the exact same problem! Still didn't find the answer.

i have a bricked telus snap s510, when attempting to flash the hardSPL i accidently flashed the 3V0 rom instead and bricked it. anyone know how i can unbrick it? i tried methods 1, 2 & 3 and none of them work. the gold card method just sits at loading... after entering bootloader.

tried hard reset, and when phone is turned on normally it just sits at the smart mobility screen. any suggestions on what to do?

Urgent Help Did I Brick My TP2

Please help.
I have the Verizon TP World Phone w/SIM card.
I downloaded the HARDSPL described as such: this package is for Rhodium CDMA-GSM worldphone version only (CDMA Touch Pro 2, not the original Touch Pro) devices. only RHOD400, RHOD500 modelids are accepted. this Hard-SPL supports WM6.5.
This process went successfully and I made it to the tri-color bootloader screen.
Next I ran this flashed this ROM NRGZ 21864, which appeared to complete successfully via PC, but when phone rebooted it just shows black w/Touch Pro 2 in middle of the screen.
Tried resetting, batter pull everything can't get anything to happen.
**Update: I was able to now get it into tri-color boot loader so what should I do with it now? It says SPL-1.00.Olinex, so its still unlocked. Should I just retry the rom again?
What did I do wrong? Is this phone dead? How do I get to bootloader? What should be my next step if phone is not dead.
Thank you!!!

Get a different rom that one didnt load or you could try reflashing doesnt seem as it took properly but no fears your phone is not bricked
Make sure you get a rom built for CDMA phones. this isnt the proper section for that goto RHODUIM CDMA

To Flash from the SD card, the .nbh file needs to be named "RHODIMG.nbh"
copy the .nbh file to a micro sd card, prefarably a 2gb or lower formatted as a FAT32
plug it in
get into the boot loader
i would recommend getting the stock ROM for your carrier and flashing that before moving to a custom ROM
hope that helps

ME TO
How do you get it to load in the bootloader menu ? Any luck with fixing it?

LECKEY73 said:
How do you get it to load in the bootloader menu ? Any luck with fixing it?
Click to expand...
Click to collapse
To enter the bootloader hold volume down and power (the red end key, not the sleep key on top) and press the stylus into the reset button. Once you see the tri-color screen you can release volume and power.

Same thing happened to me on my flash to that exact ROM. I guess sometimes it just doesn't flash correctly for some reason. No worries, enter bootloader mode and try flashing to MightyROM. After that, I was able to flash to whatever ROM I wanted. (But then I flashed back...MightyRom rules!!)

the spl 1.00 is fine. just go here it's for cdma phones only.

thanks everyone, got it back into bootloader via the challenging (hold both buttons and hit reset) Years of cosole gaming clearly paid off for those acrobatics.
Reflashed to original rom/radio, will put MightyRom back on..think I just needed to bump my head a bit, start over after some lessons and get this running better.

[Problem] Flashing HardSpl trough MicroSD fail (pls help)

I had a StockSpl on my Htc touch pro and I wanted to flash an unsigned Hard-SPL from my MicroSD because I wasn't home and I didn't have the USB cable. After the screen loaded 100% the device restarted I took off the MicroSD and now it keep showing this tri-color screen:
RUUNBH
RAPH100
SPL-1.90.000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
Upgrade ROM code error
Please try again
Serial.
(I've also attached a picture)
If i try to flash again from MicroSD the same HSPL it loads until 100% then restart and start to load again until i get the MicroSD card off. Or if i try to flash other StackSPL or any other ROM it stays on Loading on a grey screen.
After I went home I tried to flash the HSPL again from my computer using the USB cable, it start to load 0% then it does nothing. I've tried to flash StockSpl and other ROMs from the computer too but it does the same.
I think i've tried anything but nothing seems to work ... if someone can help me pls ... i've searched the entire forum and there's someone that had almost the same problem here: http://forum.xda-developers.com/showthread.php?t=566796
but noone had any solutions.

You can't flash hard spl off your sd card; it's got to be done through a usb cable.
Just read through the hard spl thread; it's long, but your situation has probably been addressed. I did it almost 3 years ago, so I don't remember the tricks. That's the case with most posters, I'm afraid. Just read the thread.

can u pls tell me which thread?
this one?: http://forum.xda-developers.com/showthread.php?t=410150
or this one?: http://forum.xda-developers.com/showthread.php?t=448008

Either, but read the first one. You can also look in the unlocker thread. Hell, you may just want to buy the unlocker and run that. It will flash hard spl, and the directions may be better.

I just hope they aren't trying to HSPL(hard SPL) a CDMA device :S I've made the mistake to assume the person that was posting in this forum had a GSM device and they really screwed up after a third attempt at flashing HSPL!
Usually if I have a difficult time flashing my Fuze or TP(both GSM), I remove everything to include the battery, connect the USB to an available USB port on the computer then hold the volume down key while connecting the device to the USB cable. Probably not the most friendly way but it certainly will tell you if there is a problem with your USB port/cable or even device!

My htc raphael is GSM
I've tried to hold the volume down button but it's always the same
There's no problem with the cable just that I can't flash anything because I'm stuck with a stock-spl and I can't flash a hard-spl either. When I try to flash something from the computer it starts to flashing with 0% then nothing happends until the RUU gives me the 262 Error. And when i try to flash from my mSD it just stuck with a Loading screen.

Xadow said:
I had a StockSpl on my Htc touch pro and I wanted to flash an unsigned Hard-SPL from my MicroSD because I wasn't home and I didn't have the USB cable. After the screen loaded 100% the device restarted I took off the MicroSD and now it keep showing this tri-color screen:
RUUNBH
RAPH100
SPL-1.90.000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
Upgrade ROM code error
Please try again
Serial.
(I've also attached a picture)
If i try to flash again from MicroSD the same HSPL it loads until 100% then restart and start to load again until i get the MicroSD card off. Or if i try to flash other StackSPL or any other ROM it stays on Loading on a grey screen.
After I went home I tried to flash the HSPL again from my computer using the USB cable, it start to load 0% then it does nothing. I've tried to flash StockSpl and other ROMs from the computer too but it does the same.
I think i've tried anything but nothing seems to work ... if someone can help me pls ... i've searched the entire forum and there's someone that had almost the same problem here: http://forum.xda-developers.com/showthread.php?t=566796
but noone had any solutions.
Click to expand...
Click to collapse
Naughty Naughty..
I guess you realise now that you should ALWAYS read read read before modifying your phone in any way.
What EXACT file did you originally flash to your phone via microsd card and where did you get it from?
If you go into the bootloader screen and then connect the usb cable does it show "usb" at the bottom of the screen?
PLEASE STOP TRYING TO FLASH HARDSPL FROM MICROSD AS YOU CANT DO IT. If you could then it would be in my guide..
Mark.

mskip said:
Naughty Naughty..
I guess you realise now that you should ALWAYS read read read before modifying your phone in any way.
What EXACT file did you originally flash to your phone via microsd card and where did you get it from?
If you go into the bootloader screen and then connect the usb cable does it show "usb" at the bottom of the screen?
PLEASE STOP TRYING TO FLASH HARDSPL FROM MICROSD AS YOU CANT DO IT. If you could then it would be in my guide..
Mark.
Click to expand...
Click to collapse
Thanks for replying
Yes ... I did read the part with the SD flashing but i thought it's not a bit deal to flash from mSD since the flashing via activesync is so easy.
Well ... i extracted the RUU_Signed.nbh from the Hard-SPL found HERE and i copied it to the mSD (MicroSD) and renamed it RAPHIMG.nbh.
I restarted my phone holding the volume down button and it started to load until 100% then it restarted and showed the bootloader screen and after a couple of seconds start to flash the HSPL again so after it completed 2 or 3 times of flashing and restarted i took the battery and the mSD off (I DIDN'T TOOK THE BATTERY WHILE IT WAS IN THE PROCESS OF FLASHING). And when i started the phone again without mSD it showed the bootloader screen like it was waiting to get a .nbh file on mSD to start flashing again.
No matter what i do my phone start in bootloader and down it shows "Serial". If i connect the usb it shows "USB".
I tryed to do a hard reset and it seem to work but after it finish and the phone restarts is stuck with the same tri-colour screen.
Sry for trouble and thx again

I guess I missed the part in the OP where you said it was stuck in bootloader. That's not good. I would try flashing the stock raphael rom (assuming you have it). Have you tried that? I dunno, you may be stuck for good.

Xadow said:
Thanks for replying
Yes ... I did read the part with the SD flashing but i thought it's not a bit deal to flash from mSD since the flashing via activesync is so easy.
Well ... i extracted the RUU_Signed.nbh from the Hard-SPL found HERE and i copied it to the mSD (MicroSD) and renamed it RAPHIMG.nbh.
I restarted my phone holding the volume down button and it started to load until 100% then it restarted and showed the bootloader screen and after a couple of seconds start to flash the HSPL again so after it completed 2 or 3 times of flashing and restarted i took the battery and the mSD off (I DIDN'T TOOK THE BATTERY WHILE IT WAS IN THE PROCESS OF FLASHING). And when i started the phone again without mSD it showed the bootloader screen like it was waiting to get a .nbh file on mSD to start flashing again.
No matter what i do my phone start in bootloader and down it shows "Serial". If i connect the usb it shows "USB".
I tryed to do a hard reset and it seem to work but after it finish and the phone restarts is stuck with the same tri-colour screen.
Sry for trouble and thx again
Click to expand...
Click to collapse
As Farmer Ted said your best bet now is to download your ORIGINAL Rom (from your provider) and flash it from your pc with the usb cable attached. The phone had to be in SSPL mode before running the RUU which is why everything was packed in a single exe. You may have corrupted your SPL in which case you have bricked your phone but if you can manage to flash a Stock Rom then the Stock SPL should be reflashed and you can start again with the HardSPL by following the CORRECT instructions and not making up your own lol.
Good luck.
Mark.

When i bought my phone, the first thing i did was to dump the rom. So now i rebuild it from raw and tried to flash but it didn't work so i went to Orange site and i downloaded the official ROM then started to flash and ... IT WORKS
I think that the ROM was corrupted not the SPL, and since the SPL was stock it didn't allow me to flash other ROMs other then the official
Thanks for all guys I couldn't done this without your help
P.S: why did it allowed me to flash the official rom but the hspl not?

It didn't flash the hard spl because you did it all wrong; those rebuilt roms aren't exactly the same as the stock roms, so it's not surprising that wouldn't flash. Good job finding the original shipped one, though.
Now, just read mskip's instructions and you should be good to go. I think the trick is just to enter bootloader, then connect to your pc through the usb cable.

Stucked at flashbot LED phone wont turn on

Here what happen. I wanted to instal this custom rom http://forum.xda-developers.com/showthread.php?t=2304297
After i downloaded all files, i put them in internal memory instead of SD card, so when i entered in Recovery mode, i did Format System, and than i find out that i need to put files in SD card, i pres rebot system now, and it stucked.
Than i download this firmware http://forum.xda-developers.com/showthread.php?t=1998277
And Flash tool 0.9.13 and i did flash. After it said DONE, i unpluged phone and i try to turn it on but nothing happen. I put it on charger and it went in flash mode, Green led, i pull out battery and hold power button for few second than plugged charger again, but same only blue led and that's all.
Maybe problem was in flash toll because in first two try i was unable to flash it it showed me header error, but after i unpluged phone than click on flash and chose file and pluged it again, it worked.
Any idea how to fix this ?

JoleKze said:
Here what happen. I wanted to instal this custom rom http://forum.xda-developers.com/showthread.php?t=2304297
After i downloaded all files, i put them in internal memory instead of SD card, so when i entered in Recovery mode, i did Format System, and than i find out that i need to put files in SD card, i pres rebot system now, and it stucked.
Than i download this firmware http://forum.xda-developers.com/showthread.php?t=1998277
And Flash tool 0.9.13 and i did flash. After it said DONE, i unpluged phone and i try to turn it on but nothing happen. I put it on charger and it went in flash mode, Green led, i pull out battery and hold power button for few second than plugged charger again, but same only blue led and that's all.
Maybe problem was in flash toll because in first two try i was unable to flash it it showed me header error, but after i unpluged phone than click on flash and chose file and pluged it again, it worked.
Any idea how to fix this ?
Click to expand...
Click to collapse
you should read step to use FlashTool again. If not you can use SUS ( Sony Update Service)
Sent from my ST23i using XDA Premium 4 mobile app

JoleKze said:
Here what happen. I wanted to instal this custom rom http://forum.xda-developers.com/showthread.php?t=2304297
After i downloaded all files, i put them in internal memory instead of SD card, so when i entered in Recovery mode, i did Format System, and than i find out that i need to put files in SD card, i pres rebot system now, and it stucked.
Than i download this firmware http://forum.xda-developers.com/showthread.php?t=1998277
And Flash tool 0.9.13 and i did flash. After it said DONE, i unpluged phone and i try to turn it on but nothing happen. I put it on charger and it went in flash mode, Green led, i pull out battery and hold power button for few second than plugged charger again, but same only blue led and that's all.
Maybe problem was in flash toll because in first two try i was unable to flash it it showed me header error, but after i unpluged phone than click on flash and chose file and pluged it again, it worked.
Any idea how to fix this ?
Click to expand...
Click to collapse
i just got through this problem...so if u are still facing it,here goes..
can u get blue led(fastboot)..if yes then connect to a win 7 computer with required drivers(win 8 doesnt work properly)..start falshtool on that computer and connect the phone in fastboot mode,..after a few seconds it will go back to green led..manually repeat connecting in fastboot mode untill your battery gets enough charge(which you wont know untill you have triued flashing)..after a few hours try flashing only the kernel using flashtool ...if this completes you are halfway through...if not then repeat the previous steps untill it does...then when this is doneleave the phone connected to your usb,it should bootloop between sony logo and flash mode...after a few hours when there is enough charge in your phone you might have to flash stock ROM or any stock kernel based rom..
if this doesnt work ,can u get back to me with some step step of what you actually did prior to this situation?
Thank me if it helped

I used SUS and now its work fine
Послато са GT-I9300 користећи Тапаталк 4