My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
diar said:
My phone has a very noticeable delay on incoming calls. I'll see it light up and flash for a bit, take a few seconds to get caller ID, then it will finally ring once before going to voicemail. All the while the caller is hearing the phone ring but I'm not...I tested it. Since I don't stare at my phone all day I have a high volume of missed calls because many times I only get the last ring. Any ideas what's going on? I tinkered with settings in Advanced Config and DiamondTweak. No dice. I'm using the stock Fuze Rom.
Click to expand...
Click to collapse
I have the same problem (htc org. rom)
Maybe this will work
I noticed that when someone calls my phone, they get two rings before my ringtone turns on.
After a second, my Fuze's LED starts flashing, then my ringtone starts playing after another second.
I have an idea:
1. Go into "Start > Settings > Phone"
2. Go to the "Services" tab
3. Highlight "Call forwarding" and then click the "Get Settings..." button.
4. Change the "Forward after:" dropdown box to something higher (e.g. "30 seconds")
It won't help the ring delay, but I think this will give you a little more time before the call is sent to your voicemail. I haven't tried it, but let me know if that helps
NuShrike said:
Isn't this normal behavior?
I've set my Kaiser on GSM mode and I can hear calls coming in on my computer's speakers a full 2-3 seconds before the phone actually rings.
Click to expand...
Click to collapse
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
adamantypants said:
I wouldn't call this normal. This is the first mobile phone that I've had that has had delays that long. If I didn't keep my phone next to me for most of the day, I'd probably miss more of my calls as well.
Click to expand...
Click to collapse
I agree with you, this lag is very big problem, I missed a lot of calls, most of people must call me again because they are forwarding to voicemail at first time before I find TP (I cannot change in forwarding to 30 sec.
I'm wondering how it is in Diamond.
This is very frustrating. Nothing seems to fix this problem. I've reduced the call ID match to five digits instead of eight. I've made sure that Ring Time is set to "without delay" in DiamondTweak. I'll try the idea to change the call forwarding time but this seems to be a major problem in the OS itself. With this issue, Voice Command problems, the GPS lag and other issues I might have to jump to another phone.
Do cooked ROMS have these same issues?
I've got the same issue.. using T.I.R. V8R ROM, so yes, this delay is present also on custom ROMS. It has to do with the dialer skin?
This was discussed in a thread on an app that causes the vibrate pattern to match the ring pattern in hacks & discussions (I think called VAlert). The vibrate pattern starts immediately and the ring is delayed so the app isn't perfect (unless you build a delay into the vibrate but that's separate). The solution seems to be an app from tweaks2k2.net that I hear removes the delay. This is an issue with all WM phones. I haven't tried tweaks2k2 but I hear it works.
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
diar said:
the tweaks2k2 fix - to eliminate the 3 second ringer delay - didn't work for me. so i went into the network phone settings and set the call forwarding to 25 seconds (it was 10). that didn't fix the ringer delay but now at least my phone rings three or four times before going to voicemail. i guess that will have to do for now.
Click to expand...
Click to collapse
it don't work sorry
Doing some debugging, on the Fuze at least the ringer delay seems to be tied to the bloatedness of the dialer.. it has a whole bunch of imports so its loading alot of stuff up every time you get an incoming call.. I'm afraid the only solution for this will be a dialer that does not bring in those kind of dependancies (PTT, Video Share, G-Sensor, etc)
The fastest way to go would be using the default windows dialer, but you'd lose all that functionality.. but hey. It would ring instantly!
I'll look into stripping the dialer from my clean ROM and providing a cab..
Confirmed. Removed the AT&T dialer skin from my rom and called my phone, rang as fast as any other phone would.. So the dialer skin is indeed the culprit.
Dang AT&T. Dang them and all their bloatware.
I'm going to corporate store to complaint. To all of them within a 10 mile radios.
I've posted my Beta 1.5 with the dialer removed. It's not an official fix by AT&T, but it is a fix..
I'll see if I can whip up a .cab to stop the dialer from loading in the stock AT&T ROM, that should help there too.
i like this dialer...but not that much. how do i disable it? in advanced config, i saw an option to enable the phone dialer skin or the default windows mobile dialer. would switching to the default fix it without causing any other problems?
EDIT: switched to default dialer and that fixed it. it also seems to have fixed the problem of having to re-enter the data connection password after a soft reset.
This set of cab's should do the job for anyone who doesn't want to install Advanced Config (it's a single registry entry HKEY_LOCAL_MACHINE\Security\Phone\Skin - Enabled=0/1)
Wow it really is about two seconds before the phone rings. Hm I never missed a call yet on this phone. where do you keep your phone that it takes so long to answer it?
AT&T's network lets you set the number of seconds before the call rolls over to voicemail, as do others, I believe the default on AT&T is 20 seconds, with a minimum of 5 and a maximum of 30, so if someone has it set to 5, that leaves only 3 seconds..
Of course they could just set it higher, but that's a different issue
So then a simple fix would be to go into your voicemail and set it to 22 seconds and then you still have the same time to pick up that phone. But still how does the 2 second dely really make you miss all them calls?
Hi,
I just noticed that when disabling the call divert to my mailbox completely, the TP stops ringing after approx. 20 seconds when called. At this time the other side still hears the call tone.
UPDATE: This happened when changing the call divert using GSM codes since the option from the telephone settings menu did not work properly. When afterwards going to the settings menu and requesting the current network settings they are displayed correctly and the problem seems to be gone.
CU,
Cactus World
On the Fuze...
1. Is there a way to see how long each phone call was (timer)? When i go into "Call History" - it only shows the date (or if the call was from today - shows the time) but you never can tell how long you were on that particular call for.
2. What time that call took place? - After a day goes by as it only shows the date?
if you click on the call, it should show the call date, time and duration
A friend of mine made this app On Call End
www.appbrain.com/app/on-call-end-(not-call-log)/com.brosix.callend
The last thing he added is Call Duration Toast Notification, but it is not working as good as it should.
He said that he used OFFHOOK and IDLE to measure the time. But that way if you call somebody, phone rings few times and you hangup it will show 10 secs for example.
What other methods can be used to take that measurement.
Call Cost it very accurate doing that
www.appbrain.com/app/call-cost-2/com.echlab.callcost
but is has other minuses.
So, I had a conference call this morning but was just a listener with my mic muted. Was using speaker phone with mic muted and screen off and after exactly 15 minutes, the call ended. I dial back in and do the same (speaker phone, mic muted, screen off) and the call dropped again at exactly 15 minutes.
My question is simply: WTF?
One possibility could be the conference # itself. I'll need to test a different call and see if the same issue occurs.
Seems quite likely that it was the conference itself
Was on the phone for over an hour the other day on a business call, so it definitely doesn't affect normal phone calls.