Too many theads relating directly to the fuze! Here is one big thead. Please post in here That way, we don't flood the whole Raphael forums with fuze this and fuze that. I'll edit the first post as we go. Or a mod can also.
Kraize
Q: My Fuze keyboard is all messed up after I flashed a different rom!
A: Download this cab file and install. Then soft reset.
Click to expand...
Click to collapse
Q: How can I get rid of all that bloatware on the AT&T rom?
aruppenthal said:
1.Wait for the tap here to customize.
2.Go through the screen alignment
3 skip or set pass word.
4.When it says your done and tap the screen to start WM get ready to reset
5. The absolute second you touch the screen hit the stylus reset.
6. When your device starts TF3d will NOT be in your today Items
7.Go to today settins and disable everything
8.Use file explorer to go to windows and find PT_Manila_Reg .cab and run it
9.Run MSFT_Security.cab
NOTE: The programs will not be organized in folder if you do this. Just a big Programs Folder
Click to expand...
Click to collapse
Q: TF3D is very slow and laggy. Sometimes it doesn't respond at all.
Install: Advanced Configuration Tool v3.3 and enable various tweaks and also install Diamond TF3D Config 0.6.7 and enable the various tweaks to make TF3D faster. If this doesn't work, flash a custom rom and see if that makes a difference.
Click to expand...
Click to collapse
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
Noob question. Go here and search. You'll find your answer. I can't do everything for you.
Click to expand...
Click to collapse
I got one... my scrolling through the different tabs seems to work at time and other times does not scroll at all is this laggy or am i using the tf3d wrong?
rymonday said:
I got one... my scrolling through the different tabs seems to work at time and other times does not scroll at all is this laggy or am i using the tf3d wrong?
Click to expand...
Click to collapse
Added to 1st post.
Thanks for the links -- hope those programs help!
got another one.....
I get a popup keyboard alot... I installed the null keyboard and it helps but find the bottom bar popping up very annoying.
How do i get rid of that?
i tried a theme called vista ultimate which i liked alot but when i slide the keyboard out it doesnt go to the launcher screen it turns tf3d on its side but of course it doesnt work that way
how do we know which themes will actually work with our pro?
or how do i make the launcher come up with that theme
Good idea:
My Fuze is always connected via EDGE, even though I live in a 3G serviced area (San Francisco Bay Area). I'm assuming the phone is choosing the stronger of the two signals by default, which is fine for voice, but EDGE is excruciatingly slow for streaming video. Is there a way to force the phone to use the 3G connection?
Reply With Quote
dokomo said:
Good idea:
My Fuze is always connected via EDGE, even though I live in a 3G serviced area (San Francisco Bay Area). I'm assuming the phone is choosing the stronger of the two signals by default, which is fine for voice, but EDGE is excruciatingly slow for streaming video. Is there a way to force the phone to use the 3G connection?
Reply With Quote
Click to expand...
Click to collapse
I have just answered this for you in the post you started.
lbhocky19 said:
i tried a theme called vista ultimate which i liked alot but when i slide the keyboard out it doesnt go to the launcher screen it turns tf3d on its side but of course it doesnt work that way
how do we know which themes will actually work with our pro?
or how do i make the launcher come up with that theme
Click to expand...
Click to collapse
A lot of the diamond themes wont work on the Fuze in landscape mode. I think that Vista Ultimate is one of Nisse's themes so maybe send him a message and see if he has a version for the Fuze.
Kraize
Make note in the skip the bloat that they must also install the HTC_PPC_opera_9 cab from windows if they want the internet tab of tf3d to work.
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
As Kraize said most you can find in the thread he linked. However, so far none of the background changing mods have worked foe me. It completely breaks TF3d. I think it will take a few days to figure out this versions backgrounds.
MODS please sticky this. Its already getting insane with Fuze posts.
Has anybody tried to see if they can get the phone unlocked to be used outside of the united states, or to be used on another carrier?
Q: How to enable and keep HSDPA? Or am I the only one with this issue?
starstreak said:
Has anybody tried to see if they can get the phone unlocked to be used outside of the united states, or to be used on another carrier?
Click to expand...
Click to collapse
Olipro will unlock it for a small fee. See the sticky in the raphael rom development forum.
aruppenthal said:
Q: The original TF3D theme is ugly! How can I change it without flashing the rom?
As Kraize said most you can find in the thread he linked. However, so far none of the background changing mods have worked foe me. It completely breaks TF3d. I think it will take a few days to figure out this versions backgrounds.
MODS please sticky this. Its already getting insane with Fuze posts.
Click to expand...
Click to collapse
I downloaded the TF3D config tool on the diamond thread and the HTC Black Theme posted elsewhere and it worked for me. One thing i did notice is that the splash screen with the AT&T logo didn't appear. Looks much better than the AT&T theme...
FUZE and VIsta WMDC need help
Just got my fuze last night. Tried installing the software on my laptop - for some reason the WMDC does not recognize the device. Evey time I hook up the fuze the laptop tried to install a driver. NOw my 8525 doesn't work with the laptop too! Any help sorting this all out would be greatly appreciated. I mainly need to get my contacts from the 8525 (running WM5) to the Fuze.
Thanks
Kriaze, Thank you so much for starting this thread. This is going to be so helpfull to all us new Fuze owners. This is why XDA is the GREATEST for us HTC users.
So many thanks to EVERYONE...
Beachboyde/Jon
I joined this site just for the release of the Fuze/Touch Pro although I'm waiting for Black Friday to purchase. I have 2 questions for those that already have it:
Does the Fuze come with the USB-headphones like the Touch Pro?
If not, would the one from Sprint work?
hg23 said:
I joined this site just for the release of the Fuze/Touch Pro although I'm waiting for Black Friday to purchase. I have 2 questions for those that already have it:
Does the Fuze come with the USB-headphones like the Touch Pro?
If not, would the one from Sprint work?
Click to expand...
Click to collapse
It does not come with the headphones but does come with an adapter to allow you to use 2.5 and 3.5mm headphones of your choice. It also allows the fm radio to work just fine.
Edit: and yes the sprint headphone will work. They are just the generic htc usb headphones/headset.
Sashimi?
Forgive me as it has been a long time since i have been a part of these forums. When i was using my tilt around the time 6.1 official came out i had sashimi set up perfect for post flashes. I just got my sashimi folder back to where i wanted it to install on the FUZE yet it is erroring out due to screen resolution sizes. Does anyone know if a new version was released to support the vga devices or did this die with the author being banned.... Thanks for the help!
i cant find a manila tf3d cab from a touch diamond pro to put on my fuze i have looked and looked can someone help plezzz
What exactly are you trying to change about TouchFLO?
If you're trying to improve performance, I don't believe there's any advantage to the HTC OEM TF3D vs the AT&T branded one. In fact, installing it again will just take up more memory, which is more likely to decrease performance. Try installing Touch Pro Tweak/Diamond Tweak and using it to tweak TouchFLO for speed.
If you're trying to remove the AT&T tab, there are several Manila (codename for TF3D) customizers which will do this; they also allow you to make other modifications.
If you want a 'better' TF3D, there are TF3D2 "Rhodium Manila" beta cabs sitting around; I don't believe any of them are perfect, but the newer ones seem to be working pretty nicely (i.e. no major usability glitches).
If you really want to improve how the phone works, including how TouchFLO works, you can flash a new ROM. There are dozens of guides floating around on how to do it, and as long as you're careful, the process is reversible so you can still send the phone to AT&T if you have a warranty complaint.
i have the oem for tf3d1 cfc with the original htc theme. you can prolly put it into a cab or grab the files you need or something. im not sure if it will install over. i put it into the kitchen when im building.
i used to have a tilt and i would soft reset it before att would load all their bull i did that on my fuze and tf3d wasn't there thats why i need a tf3d cab i tryed the rhodium cad and every thing didn't work like my email and i want a youtube short cut on the internet tab and the theme sucks i need someone to sit down and show me how to flash a rom i read all the threads about it but im a hands on person so thats where im at on roms
Ok so i can change the theme but its hard finding one that works well i have the HTC black theme but it makes the touchflo run vary vary slow even when i tweak the memory setting but what really want is to get the youtube shortcut on the internet tab can someone help me with that
Look here for several tweaks that will have your phone running like a champ. Mine is like a new phone after going through the thread.
does anyone have a for sure working cab. I've searched and tried a few different ones w/ this new ROM i'm using (TAEL)...and all the cabs i've tried seem to fudge something up. for the most part, none of them have the numbers in the right spot Fn+any number gives me symbols instead of the numbers. So far i've tried one called 'HTC Fuze Keyboard fix' and 'TP2FUZE KB', and another called 'Shlomki Fuze Keyboard in TouchPro ROM'
EZinput 2 does not play nice with the Fuze keyboard lay out, his new rom corrects the issue along with many other bugs and from what TAEL says it should be out some time tomorrow.
Fraid i cant be 100% sure - but i think http://blownfuze.org has the cab (mines not a fuze so never bothered downloading the cab to check!)
well...i'm not running ez input...but i'm running finger keyboard 2.1. I never had any problems w/ my tilt using that app. Hopefully thats not it, i'm gonna try this cab one more time from blownfuze.
if i'm installing these cabs, it wouldn't matter if the keyboard was changed under the advanced config utility would it? Because regardless of whether it was on AT&T/Cingular/English/Custom...installing the cab would make the reg edit right?
you dont have to be using EzInput but its installed on the device and thats where the conflict is, The EzInput changes the key mapping for all hardwere keyboard keys.
dah wellz, i just switched back to nrg genesis rom. no biggie. thanx for the help anyways guys
Happy New Year guys!
My buddy has a tp2 from uscellular and I'm trying to hook him up with morphgear. I can't get the keymappings to work I just get the 229 code. I know how to map the keys by using the virtual keyboard but I'm supposed to switch to the windows mobile standard keyboard and the problem is that isn't an option. I have only the HTC keyboards listed. Anybody able to shed some light on this? Can I add the winmo keyboard through a cab or is there a setting that is hiding it from the list? Thanks in advance!
Digitaltigre said:
Happy New Year guys!
My buddy has a tp2 from uscellular and I'm trying to hook him up with morphgear. I can't get the keymappings to work I just get the 229 code. I know how to map the keys by using the virtual keyboard but I'm supposed to switch to the windows mobile standard keyboard and the problem is that isn't an option. I have only the HTC keyboards listed. Anybody able to shed some light on this? Can I add the winmo keyboard through a cab or is there a setting that is hiding it from the list? Thanks in advance!
Click to expand...
Click to collapse
Is it the stock ROM or a cooked ROM? Some cooked ROMs don't have that stock WM keyboard.
Try going to Start > Settings > Personal > Input. Look for Keyboard in the drop-down. That's supposed to be the WM keyboard.
Sorry if that didn't help (I doubt it helped).
Happy new year!
Thanks for the reply although it did not really help but that's ok. The stock keyboard s not listed in the settings menu either. It should be a stock ROM because it hasn't been changed since it was brought home from the retail store but I wouldn't put it past USCellular to have a custom build. Does anyone have the stock keyboard pulled from the CDMA TP2?
As far as my limited knowledge allows me to understand, if its not already in the rom then it has to be cooked in with a custom rom. I have looked everywhere for a cab and the responses I got from much more experienced people is that you can only cook it in. There is no reg entry to mod or cab to install. Try spb keyboard as an alternative. Its a bit bigger than the stock one (cuz its meant to be finger friendly) but it has all the features that the stock one has. I would post the cab I have for it but Im not sure Im allowed to.
PRBajista 9:
ok, sounds good I will try spb keyboard and hopefully it will let me map the hardware keys in morphgear. Can anybody on USCellular confirm the omission of the wm stock keyboard?
Anyone have a .cab for the Touch Diamond keypad, that'l work on my phone?
Thanks =]
Anyone know if this would work? iv downloaded some files, but when i go to use it, its so tiny and clearly isnt the right 1.