My center button (Used to select stuff) is not working. I have to open the keyboard and use enter key? Ive rebooted several times but no fix? Its getting annoying. Any thoughts?
may you use aebuton plus ort you easylie have changed what this button is for(within registry!)
if no other solution reinstall your rom
how do i change it?
it must be cleaned up, probably it is some dirty under it
it just started working again!!!
Related
When I wake the polaris up, it seems that the left button (the one in the wheel) is permanently pressed until I press another button. I have to do this in order to unlock the device, as the button is pressed I only get the message "Press cancel and then unlock".
This happens every time I wake up the device and sometimes when I am using it in other situations. It is almost unusable in this state.
I suppose it is a hardware problem. Any ideas for a way to fix it? I wouldn't like to send it to service, but I am fearing this is the only chance I have now. Any help would be appreciated. I have already switched it off, and also removed the battery for a while, but I have the same problem when I turn it on again.
This has happened to me for the first time yesterday. The device has not fallen to the ground any time since I have it (since February). I only carry it in my pocket.
Thanks for your help.
ah, I forgot to tell you. When the button stops being pressed (because I have pulsed another one) it doesn't work anymore. If a press it, no effect, the cursor doesn't move to the left...
I have read in another forum that someone who had a similar problem with the wheel managed to solve it by doing a hard reset and by restoring a backup done before the problem. He stated that using the option "erasing memory" didn't work and that he had to do the hard reset by doing "gps button + ie button + soft reset".
Here is the funny thing. I cannot do that kind of hardreset. Why? Because as the left button seems always pressed the confirmation screen in which you must press the send button to perform the hard reset, never appears. I guess it is due to the cruise which detects that the combination of buttons is no good or because the confirmation screen is shown but as the left button is pressed, you do not have enough time to press the send button (I don't even see the screen).
Is there anyway to perform the hard reset in another way? Thanks for your help...
Well, my cruise works fine now. What have I done? Nothing. Maybe it was a hardware problem in the contact of the button (some dirt or whatever) and now it is working. I don't know, although it wouldn't surprise me if it were software (I had a similar problem with the vibrator in a Mio A701, two days broken, got to work after that and never again failed). I just used the bluetooth and received a couple of calls.
Now I can hardreset. As the button is no longer permanently pressed, the combination of buttons works. Although I haven't pressed "send" to actually do it, since it seems fine.
More here if it fails again, but as I told you I read similar problems in the wheel in another forum...
I recently rooted my phone and edited my keyboard layout files a little(/system/usr/keylayout/). I made up and down "z" and "x" but it didn't work instantly. I backed them up onto my sdcard and have restored them to their original state.
Then, like a day later I noticed the numbers and special characters had been shuffled. I assumed the device automaticly had switched layout from the milestone2 one to the qwerty.kl one. I tried the up and down keys and they produced x's and z's. Then after a while the phone started acting very weird:
The keyboard stopped working.
When spamming keys for a while the phone will go to the homescreen and sometimes reboot.
The menu, home, back keys all do the same thing. It is sometimes something of a combination of back and home. It fades to black and goes to the starting position of the current application. And sometimes the phone will freeze and reboot.
Whenever I use the on-screen keyboard to erase a character or input a number the phone will perform something of a double back-action.
I have tried to to a factory reset in the privacy menu multiple times with my phone un-rooted.
I have also done a factory reset with the 'x' + power then @-key about 3 times but my problem is still there.
Any help on how to resolve this is appreciated.
Thanks!
I fixed it using these:
http://and-developers.com/sbf:milestone2
http://forum.gsmhosting.com/vbb/f166/rsd-lite-4-9-released-1106430/
Hey, having issues with this danged phone. Long time reader, finally joined! So! My issue goes off of another user's on this site which was not covered-link is below. On to the problem!
'Menu, Home, Back, Search, Power, and Camera Button are not functioning correctly!
Volume Up and Down work fine.
So here is what I've tried with no luck
-trying to get to download mode but can't because buttons do not work
-attempted recovery mode, again, can't select an choice
-tried using the ButtonRemapper apk with no use, it makes all buttons useless (has a restore option, thank goodness )
-tried RebootMenu apk, screen turns black -> phone needs to be reset by taking battery out**. I thought for sure this would work!
**after taking battery out and replacing, phone boots itself up with not a single button being pressed
I am just trying to do what it takes to restore functionality. Rooted currently via OneClickRoot. Superuser and Busybox are fully updated. My guess is to try and reinstall the ROM?? Ummm, let's see...did not try installing any ROMS, bootloaders, and etc..just did the root a couple days ago and it started acting up over the past 2-3 days..driving me bonkers I swear.
Currently using the Button Savior apk when booted up which is life saver for my dead buttons; tried opening up and cleaning the hardware..to no avay....what may I have missed chaps?
!
Any and all help is greatly appreciated!
ThePolak
so today i had fixed my s4 from this rebooting problem.
i was using the phone like everyday then the phone turned off by it self.
when i remove the battery and put it again the phone starts by it self going to a boot loop.
so i went to the samsung center, they told me its a software problem and it need to be flashed by a "j-tag" (software device) and they dont have it.
so i was confused
i have figured out that i cant go to recovery and i can go to the download mode for few seconds BUT! without pressing the power key!
the service center ignored me and refused to fix it.
so my last hope is to fix it by my self, so i did this!
You Have Two Options!!!
1- Hit the phone with the ground softly several times (stupid but fixed my problem)
2- Go to the power button by removing the screws under the phone back cover and release the button (by your self or anyone can handle this) :fingers-crossed:
:victory:
Had the same issue few days back...fixed it bu opening the body and putting back in place
arindam_mitra1985 said:
Had the same issue few days back...fixed it bu opening the body and putting back in place
Click to expand...
Click to collapse
I remember having the same issue, just opened recovery and did a factory reset..
Ternedo said:
I remember having the same issue, just opened recovery and did a factory reset..
Click to expand...
Click to collapse
How can it be the same if he wasnt able to enter recovery.....
For me there was some issue with the power button getting pressed automatically. ..opening body loosened it..n fixed.. i also had another issue with sview black screen blinking..issue with the Magnetometer. .loosening the L1 screw fixed that. .may b tge button got magnetised somehow. .
i too had the same problem. i found it to be a defective power button as when i just pressed the volume and menu buttons i could get into recovery or download menu correspondingly without additionally clicking the power button.
Hi. I faced this issue as well and the best part it, the button isnt stuck. I've tried pressing and releasing it multiple times, dismantled and check if the button is stuck etc. However, the issue persist, and the exact same symptom which is; able to only go to download mode for a few seconds.
Need some advices here! Thanks!
All the buttons, including the volume knob stop working.
It has happened several times on my android 5.1.1/mtcd/joying unit.
When it happens the boot process is strange. It spends a while displaying the car logo, then it displays the desktop for a second or so and then it displays the car logo again. It sort of looks like it boots twice.
Wiping the dalvik cache does not fix the problem. I have to factory reset or wipe everything from recovery to get the buttons working again.
I am currently using malaysk rom for MTCD units but I had exactly the same issue on the stock rom.
I think the problem is related to autostarting apps on reboot.
Today it happened after I installed the Sygic speed camera/traffic alert app. Everything worked fine for a while, until I chose to auto start it (from the settings menu inside the Sygic app), rebooted, and the buttons no longer worked.
To check if the autostart option really caused the problem I installed the app again, chose to auto start from the settings inside the app, and the same thing happened. Buttons no longer worked.
The issue is not specific to Sygic, as I have had the same issue with other apps.
Now I use tasker to autostart the app. It has survived a few reboots. I hope it lasts.
Does anyone understand the boot process on these units well enough to help debug it further?
It would be nice if I could fix it the next time it happens, instead of having to wipe/reinstall everything.
It seemed to be completely random for me... and it stopped happening as randomly as it started.
I posted the process I went through to get them back (reboot, reboot to recovery, reboot again, etc) but very intermittent.
I experience this whenever I reboot from the power icon in the taskbar. It seems to have started after upgrading to Malaysk's version 4. I have verified this on two Joying units. My workaround is to reboot with the reset button when I have to.
I have not had any apps autostart since the last time it happened, but the buttons stopped working again a few days later, and the "double boot" came back also. The reset button did not help.
A factory reset from the settings menu made the buttons work again.
I was using the latest joying rom and MCU. Spotify, iGo navigation (from joying) and the TomTom speed camera app were the only "extras" installed if I remember correctly.
I am about to give up on the (JY-UL135) head unit now. Unless someone has suggestions on what to do.
xdamember2 said:
I experience this whenever I reboot from the power icon in the taskbar. It seems to have started after upgrading to Malaysk's version 4. I have verified this on two Joying units. My workaround is to reboot with the reset button when I have to.
Click to expand...
Click to collapse
xdamember2, i think you are right. Power icon in the task bar is the root of evil.
Today i've had the same experience. But with the buttons, the sound had also disappeared. Pushing hardware reset button had fixed the problem.
So I suggest to remove power icon from the task bar.
This happened to me yesterday, but as well as buttons/steering wheel control, all sound output stopped working! No radio, music or navigation sounds. Tried a reboot, but in the end only a factory reset did the trick as specified previously.
Very frustrating!
This happened to me again today for the second time. While driving the screen turned to white/black static like moving artifacts and the sound cut off. After holding the power button to reset the buttons are not working. I'll update to Malaysk's Rom v5 now but looks like my apps are wiped again...
i've been on v5 for the past few days and i haven't witnessed this behavior.
Any luck with the buttons and sound stop working? It`s the same with version 6 of this ROM which i like way better then the stock ROM. I`v noticed that any other reboot except the standard one, when the HU shuts off by it self, will make buttons unusable and no sound. The first time it happen to me was when i did some changes in the "factory settings" menu that needed to reboot the device. The only way i managed to fix it was to do a factory reset. Tomorrow will try to flash the same ROM (V6) without wiping to see if this will fix it,because they don`t work again now after rebooting from the power icon . Lets hope someone finds solution for this annoying issue.
MY FIX for Volume knob not working on Android Head Unit
Hi All
I updated my generic Ford Focus PX5 android head unit, and after much swearing and reading on here, I still was unable to fix the top left volume and top right tuning rotary knobs as they had stopped responding.
Eventually i started mucking about with Factory Settings and in the "OTHER" section I looked at "Knob Mode"
Experimenting with the various settings I eventually determined that for me, "2 10K/20K ADC Ports" works. I now have fully functioning controls.
I hope this is of some help to you guys!
I had been fooling with the settings of my Android head unit and some days later realized my volume knob wasn't working. That knob was a big factor in my purchase of this unit. After fooling with a dozen or more logical sounding settings, I happened upon the setting which had to do with 'Key lights'. Here's the fix:
From 'Settings' go to 'Factory Settings' and enter code 8888. Go to 'Key Light Settings'. On 'please open the debug button lamps' press 'OK", slide the screen up and turn off 'whether to turn on the colorful lights'. Back on out and the volume should now be working. Hope this helps
Sdgz said:
I had been fooling with the settings of my Android head unit and some days later realized my volume knob wasn't working. That knob was a big factor in my purchase of this unit. After fooling with a dozen or more logical sounding settings, I happened upon the setting which had to do with 'Key lights'. Here's the fix:
From 'Settings' go to 'Factory Settings' and enter code 8888. Go to 'Key Light Settings'. On 'please open the debug button lamps' press 'OK", slide the screen up and turn off 'whether to turn on the colorful lights'. Back on out and the volume should now be working. Hope this helps
Click to expand...
Click to collapse
I recently bought a new android head unit. All are working well except the original volume knob of the car. Sometimes i must turn it 4-5 clicks for the volume to move 1 click, and other times i may turn it 10-15 clicks and the volume does not respond at all. This is very frustrating! I found a solution on youtube which says factory settings-other- and uncheck the wheel3 option, but my head unit doesn't have this option at all. I hope your solution will help me!
Update : I searched for this solution you mentioned but this option does not exist in my factory settings with 8888 code. Only car logo. I dont know what to do....