How to use default windows volume toggle??? - Touch Pro, Fuze General

I am trying to use the windows volume and system sound toggles and no the HTC one. i have tried using diamond tweak but it does not work. can someone please help me?!?! Thanks!

anyone have any clue how to disable the HTC Volume??

Iam interested too.
When I was an resart the volume Controle was Windows Standard for a few minutes. It sonds like an driver was startet when the Phone was strated???

yeah, i noticed this too. I prefer the windows default one. someone please help??

anyone figure this out??

anyone help?

I would like to know this too, any help appreciated.

When I installed Manilla 2D on my Kaiser, it installed the Opal sound manager thing. I would have liked it if both sliders were on 1 page, but having 2 different tabs pissed me off. I went into the registry
HKLM\Services
and there was a key called HTCSOUND I deleted it and restarted and the Opal sound manager wasn't there any more. Maybe it is the same for the Raphael?

Related

vibrating keypad wm6?

I saw this registry tweak:
http://www.mdatweak.com/tweak_detail.php?tweak=14
that adds vibration to buttons of the dial pad
However I tried it in WM6 and it doesn;t work anymore. Does anybody know how to get it working in WM6?
I used the attached cab and got it working in WM6.
It looks like it makes the same changes as on that website, only automatically.
One thing I noticed, which might help or might not, was that it didn't seem to vibrate when I had "Keypad" under Phone Settings set to "Off".
Try setting it to "Short tones" and see if it works.
Oh, and you've reset your phone after making the registry tweaks, right?
yep, that was it. my device (htc herald wm6) was set to no sounds.
I found that it does not always vibrate. Sort of as if the vibrate motor has to start up. It worked best if the settings were set to long tones.
But I'm not using it anymore. in practice it is not as handy as I though it would be
vibrating keypad
hi guys. i downloaded the above attached file to my tytn 11 (orange). i find it does not work well (due to the time lag in the vibrating winding-up process) - and wish to delete it (it is actually quite annoying) and regain the normal keypad tone. i have gone into 'settings' 'remove programmes' and see no item listed. I have gone into 'file explorer' and delete the file name - to no effect. have i done the wrong thing? can anyone help me, please?
First of all...
This is wizard forum not herald....
Then use this...
attached let me know if this works...
+ Que PPC. thanks. have tried your solution (and then done a soft reset). unfortunately it has not worked! could you please consider another solution...?
noup really no...
I dont have other this works forme on Hermes and in wizard the truckQteka makes the dids! but i dont find it anymore. sorry men ask on Kaiser forum

Problem with Large Start menu on non HTC devices

hi there!
I downloaded JUVS HTC Large Titlebar and HTC Enlarge Start menu CABs and installed both on my E-TEN M800 (VGA).
They installed fine and I now have the "large start menu" item in my system settings.
But when I check the checkbox to turn it on, it still doesnt enlarge.
I rebooted the device and still nothing. I basically only need the zooming of the notification icons in the start-bar.
have I missed something? do i need additional files?
thanks
Bernhard
the old one just for QVGA, try this one, but dun know can it work on ETEN
thanks, but it doesn't work.
maybe it needs touchFLO so its only activated when you use the finger? or something like that?
No touchflow wouldnt make a difference on this. Unfortunatly some of the items on here will only work with HTC devices and i think this may well be one of them im afraid. Unless anyone else can shed any light
Tried the Large Start Menu once on my iPAQ, and what I found was that the service (htcStartMenuService.dll) doesn't automatically start. Using DotFred's Taskmanager to manually start the service made the large start menu appear... until the next soft reset.
The same thing probably happens with the large titlebar thing.
thanks ridolfo, this works!
now i have to find a way to start it automatically on reboot
makes my e-ten even more userfriendly!
edit: i just added this nice and useful taskmanager to my StartMenu and on reboot, i open it, go to the services tab and click the little start icon for the LargeTitleBar service. thats it.
works like a charm.
IIRC, you can even open it on the services tab, using a command-line switch. Have a look in the "About" screen for possible command-line switches (I think it's in the "About" screen, but I'm not sure).
I'm still hoping that someone can explain why some of the HTC services do auto-start, but others don't.
yes, because when you install the LargeTitleBar it correctly creates its entry in the Registry and is bound to be started, but somehow it doesnt.
In my brand new HTC Touch Cruise, large menu option is ticked, but after playing around with apps or settings it becomes small, allthough it's still ticked. I have to disable and reenable it to make it big again. It's a bit of a problem, as it happens often. Advice would be appreciated.
same problem
couldn't this problem be fixed by some registry entires ?
I mean to put an application into autostart shouldn't be a problem, well for me, as a hardcore newp it is acutally, but maybe not fo you guys
on my xperia x1 i've got the same problem .
large start menu
bommel0815 said:
...
now i have to find a way to start it automatically on reboot
...
Click to expand...
Click to collapse
Hi! at all!
Have you found a solution?

GSen doesnt work

I tried to use very intereresting soft GSen but without success...After instalation and manually activation (by GSen.exe) it turns only File Explorer window or in case of activation from Programs it turns only Programs window. If I close File Explorer or Programs window it dosnt works...I tried many combination and settings - but without success. Do you have the same experience? Or any advice?
There are 3 files titled Gsen.exe I think... Make sure that if you open the shortcut twice, the second time it pops up a window saying "unload program?"... That's the right one. Also, when you open it, to confirm it's running there will be 1 white pixel at the very top center of the screen. I know for a fact it works on the Touch Pro, as I use it on mine. When it says "unload program" it's asking if you want to disable it, click yes if you don't want to use it anymore... Good luck.
Unfortunatelly a pixel signals that GSen is working...and sreens dont turn :-(
Jetra said:
Unfortunatelly a pixel signals that GSen is working...and sreens dont turn :-(
Click to expand...
Click to collapse
Hmmm... I know there was a config setting where you could choose what programs it does and doesn't work for, use the readme and just browse through the files to see what you can do. I can't say I tested it with a ton of applications, but I got like 3 or 4 to turn (and haven't used it since)... I'm a bigger fan of profile anyhow, I may as well have a Diamond with a memory card slot (excepting emails).
I have the same problem. I use the default configuration. So it should work, but it doesn't work. It just works with the program/window from which it was started.
I've already posted this problem in a German forum where the developer has a sub-forum, but I still didn't get an answer.
Sorry guys, we had an Raphael prototype device with AKU 1.3.1. and pre-alpha ROM for short time (testing time) in the past and it was working.
This is the reason why we wrote: Tested on HTC Raphael (Prototype)
On the basis of the missing new device and ROM, we are not able to check your problems.
Sorry again.
What a bummer! I hope you'll get a new device/ROM to test this soon ;-)
You are not alone with this kind of wishes.
Actually, there is just one VERY annoying problem with GSen 1.7 - it works for me (Touch Diamond, Dutty's 1.9) except onlyfor(1) - if this option is defined, windows are not recognized neither by class no by name or exe name... I believe this is not a matter of ROM, because I had this very problem on default ROM which I flashed to test if GSen will work... I also believe it could be not Diamond-specific...
CharlyV, could you please spend some time to find out if it's possible to resolve this?
Thanks in advance - I'm a loyal and official user of SKTools...
It doesn't work here either...
guys it even says so on gsen home page
Jetra said:
I tried to use very intereresting soft GSen but without success...After instalation and manually activation (by GSen.exe) it turns only File Explorer window or in case of activation from Programs it turns only Programs window. If I close File Explorer or Programs window it dosnt works...I tried many combination and settings - but without success. Do you have the same experience? Or any advice?
Click to expand...
Click to collapse
This hack does NOT work with the Touch Pro as the Touch Pro will base most of its screen rotation on the sliding keyboard instead.
Gsen automatical loading??
Hey guys.
I've got some beginner's questions.
My gsen doesn't start automatically when I start my Diamond.
Is it normal?
Is it possible to do anything?
Thanks.
place shortcut into Windows\Startup directory
CharlyV said:
You are not alone with this kind of wishes.
Click to expand...
Click to collapse
hi have loaded GSEN onto HTC touch HD and program worked well, i since put SPB plus and shell on and now GSEN wont work and also in the album section it wont allow finger scrolling. any ideas???

Gonzo WM6.1 ROM - Vibrating issue

I am currently using the most awesome Dr. Gonzo WM6.1 ROM, however my phone seems to have developed a slightly annoying quirk over the last day or so. Every few minutes, it vibrates (two short, two long ..--), as if there is a missed call or waiting message (as I see this is a new feature added by Dr. Gonzo). However, I have scoured my phone and there is no waiting notification of any kind and there is nothing running in the task manager either.
The only plugins I have installed are showaco's FeatherWeather plugin and tlogix's CHome Configurator. Both of which I had been using for a while before this vibration issue started.
By changing the interval of the vibrations (through the menu/System/Config Notification), I can see that it is indeed this script that is causing trouble. Disabling and then re-enabling it doesn't seem to help, nor does switching the phone off. I really like this script (when it functions correctly), so I would rather not just disable it completely.
If anyone has any thoughts or suggestions, I would really like to hear them.
Thanks
I've had the same problem before.. the script reads a registry value.
use a registry editor (there should be one one the phone somewhere as its a Dr G ROM).
Goto HKLM\System\State\Shell and look for a key called "Notify", select it and set it to 0. That should stop it.. You might have to reboot the phone.
It worked for me..
Google for PHM RegEdit its free software

Re-enabling the start-up animation?

I installed WM6.5 to my Fuze and it now has the black HTC logo on startup, then skips the AT&T animation, and shows the orange Windows screen.
Now, I don't want the AT&T one back but I downloaded the default HTC start-up GIF and WAV files for the Kaiser, and I want to use them on my Fuze. The problem is, under HKLM/Software/HTC/StartupAnimation, there is nothing there. And I don't know the first thing about recreating what should be in there.
Any ideas?
Assuming that you put "default HTC start-up GIF and WAV files for the Kaiser" in the correct place, then find/search for FUZE Tweak application (or TouchPRO or Diamond tweak, whatever people call) to re-enable it. It is located in 12.1 and 12.2 in the mentioned app menu.
Thanks
I had that app when my Fuze had WM6.1, can't believe I didn't remember it.
I'll see if it works, they should be in the right place.
Thanks, I installed it and enabled but still nothing happened. I think it's because normally it would have DWORDS and strings in that folder, and the Diamond Tweak app would know what to change, but on my phone, there is nothing in that folder. So the tweak app doesn't have anything to change.
In that case, does anyone care to post what is in the StartupAnimation folder on their Raphael?

Categories

Resources